CC of Photoshop closes a few seconds of starting

Similar Questions

• My app photo 8 of windows closes a few seconds of opening it.

  My app photo 8 of windows closes a few seconds of opening it. I noticed that it's usually just after plugging in a device of othe such as an SD card or my Ipod media. If I unplug the device it will always just keep shut down until I restart the computer. It's seriously irritating because I can't keep everything restaring my computer to use this app.

  Ah, thanks to some advice elsewhere it was established that Kaspersky has been the cause of my problem and I managed to solve the problem by following a few tips found here.

• Videos will play for a few seconds and start the buffering again.

  Buffering

  When I go to watch videos like on MSN or MSNBC buffer? Then play for a few seconds and start

  buffering again. Other Web sites that I can watch the video, but most of the videos to start the buffering. I run Windows Vista.

  Y at - it a cure?

  Thank you-Richard

  When I go to watch videos like on MSN or MSNBC buffer? Then play for a few seconds and start

  buffering again. Other Web sites that I can watch the video, but most of the videos to start the buffering. I run Windows Vista.

  Y at - it a cure?

  Thank you-Richard

  You download the video more slowly as you watch it. So when he says "buffering", he expects to catch up and download what you are willing to watch next.

  This type of internet connection do you have? Dialup? DSL? Cable? Whatever it is, it's too slow for what you do, or do you have some problem that it slows down.

• You tube problems and streaming video. System keeps the buffering, plays for a few seconds and starts the buffering all over again. Why and how can I fix

  On My Space, I can't watch/listen to the music streaming video and is similarly on YouTube.  The problem is persistent in all media streaming.  Videos open, play for a few seconds, then start buffering again. Why (?) How can this be fixed (?)

  Hello Maria,.

  Did you ever end up installing Silverlight or Flash?
  You can download and install the latest versions of both these sites:
  http://www.Silverlight.NET/
  http://get.Adobe.com/flashplayer/

• 2015 CC InDesign document crashes a few seconds to start working on it

  A 2015 CC Adobe InDesign document I started before my holiday now crashes a few seconds to start working on it. This problem has not happened before and does not occur in any other document. I am running Windows 7. How can I begin to know how to solve this problem?

  Open the IDML and save as a new .indd under a new name and see if it works better.

• 7.17 Skype crashes a few seconds after starting

  Just today, my Skype was starting to plant a few seconds after that, it loads all messages. Everything that happens is a popup "Skype has stopped working". DxDiag is attached. I've removed all the virtual camera software. Here is my error from Event Viewer:

  Name of the failing application: Skype.exe, version: 7.17.0.105, time stamp: 0 x 56721832
  Name of the failed module: KERNELBASE.dll, version: 10.0.10586.0, time stamp: 0x5632da1c
  Exception code: 0x4000001f
  Offset: 0x001382e2
  Flaws of process ID: 0 x 4678
  Start time of application vulnerabilities: 0x01d1427978c9062d
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
  Report ID: 1aba907e-dda2-4b9f-94e0-2ed41ae86c13
  Faulting full name of the package:
  ID of the failed package-parent application:

  I think that this could be the solution.

  http://community.Skype.com/T5/Windows-desktop-client/Skype-7-17-crash-on-startup/TD-p/4242576

• My computer lag / freezes for a few seconds then starts to work again and get pop ups, I have never before.

  For example, while I am typing my computer freezes for a few seconds and I can't type or will not move the mouse. This lasts a few seconds but then starts to work again ok. This happens on every 10 minutes or so... enough to get on my nerves, especially at the time of the school. How can I fix? I also get a pop-up whenever I go to a new page. How can I stop this as well? I'd be so grateful for any help on this matter.

  Thanks, Elsie

  Hello

  What the popup say or lead?

  Search for malware, and then run the cleaning as described below.

  --------------------------------------------------------------------------

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Downloaded adobe reader. When I try to open, window rises and closes a few seconds.

  will not open.  Anyone know why this is happening?

  Access to 11 C/programs/Adobe/Reader / player

  Looking for a file named eula.exe or fair eula.

  Double click on it.

  Accept the license agreement.

  Drive should work fine after that.

• Error message pop ups (-5006: 0x8000ffff) whenever I try to install a game in the first few seconds of starting up the plant.

  The games are compatible with vista 64 is fallout 3, the other is nhl 09. I have installed all updates for vista. I meet all requirments system for games, this computer is about 5 days old. Games both were purchased directly from a store. I don't know why he continues to be and would be grateful for the help because I just bought and I would play with my new toys =) the error msg continues to read:

  Error code:-5006: 0x8000ffff
  Error information:
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\ObjectHolder.cpp (442)
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\FileGroup.cpp (520)
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\FileGroup.cpp (520)
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\FileGroup.cpp (520)
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\FileGroup.cpp (520)
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\FileGroup.cpp (520)
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\FileGroup.cpp (520)
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\FileGroup.cpp (520)
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\FileGroup.cpp (520)
  > Kernel\ServiceProvider.cpp (109)
  > Kernel\ServiceProvider.cpp (87)
  > Kernel\FileGroup.cpp (520)
  > Kernel\ServiceProvider.cpp (109)
  > Kerné > SetupDLL\SetupDLL.cpp (1284)
  PAPP: Fallout 3
  Softworks PVENDOR:Bethesda (http://fallout.bethsoft.com)
  PGUID:974c4b12 - 4 d 02-4879-85e0-61c95cc63e9e
  $11.0.0.28844
  @Windows XP Service Pack 2 (2600) IE 8.0.6001.18828

  UncleToadie,
  I found a few things, you can consult about it.  This article describes the error message regarding updates, but it can also help in your situation.
  I've also seen several references that you can rename your InstallShield file and then reinstall Fallout 3 by Bethesda.  However, I wasn't able to confirm that the site of Bethesda.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• laptop no longer meets the entry of a few seconds after starting

  computer HP laptop with windows 7 - once computer starts, you can move the pointer of the mouse (with the touchpad), but nothing happens on either left or do a right click.  only way to stop the computer is to turn it off.  was working fine until I updated my AVG for 2015...

  Anyone else run into this?  found a solution?

  I press F8 at startup to start the computer in Mode safe, then use system restore to restore Windows to a point before the AVG update.

• Photoshop CC 2014 closes when start for a few seconds

  Hello

  When I try to open the Photoshop CC 2014. It will close after that that she has started upward for a few seconds without any error message dialog in Photoshop or error log in Event Viewer.

  I just subscribed to the combo of Photoshop & light package yesterday and tried to install Photoshop CC 2014.

  I tried to figure it out for at least 10 hours in 2 days by searching for solutions to these problems and tried everything I could do, but nothing really works.

  What I've tried are as follows:

  1. uninstall the cc ps 2014 with disable the preferences option and reinstall again with creative cloud application, but no luck.

  2. update graphic driver Nvidia, which he is already up to date, no luck. I even update windows using the center of Update window, but still the same problem.

  3. use Adobe Creative cloud cleaner tool after uninstalling the program. The cleaning tool works fine with message successfully and no error message in the log file. Then I try to install again, the ps, but no luck again.

  4. use the license Update Service tool, but not luck.

  5 remove the opm.db and not lunch Photoshop again, but no luck, same problem.

  ***6. Rename the folder SLStore SLStore_old. Open the program and he will ask me the software license by signing with my adobe account, he 'works' only for the first time. However, once I close the application and open it to new, same problem occurs, the program quits just after that I open it again. Now, I have to rename the file everytime I want to use Photoshop.

  (In fact, this problem happens the same thing for the LR and now I have to rename the folder SLStore whenever I want to use the LR as well)

  It seems to me that I have a few little license problem, but I don't understand why? and how to fix it?

  I use Window 7 Ultimate 64-bit SP1 on my VAIO laptop.

  The specs are Intel (r) Core i7 CPU [email protected], 6.0 GB of RAM. The GPU is NVIDIA GEFORCE GT 425 M.

  I really need to use the program and that's why I decide to buy the package, please help solve this problem.

  Any help, any recommendations would be appreciated.

  Thank you.

  I found the solution to that of these threads Re: Photoshop CC opens and then closes immediately. What gives? and Re: Photoshop CC crashes and closes a few seconds of starting

  I did it and it works for me, so I think I should share it so that people who have faced the same question that I can give it a try.

  Basically, just uninstall the Photoshop and creative cloud, then rename the folder SLCache SLCache_old. Restart your computer once and then re - install everything again. (CC and PS)

  It should work.

  Thank you

• Satellite A110-180 - fan starts but stops after a few seconds

  Hello

  I have a Toshiba Satellite A110-180 and when I turn on the computer, the fan turns on but it stops in a few seconds and starts again in a while and stops again and starts... Then the laptop gets heat quickly.

  I bought the laptop about 5 years ago, so I think the problem is the fan or the circuit that controls the fan. Can someone who has had the same problem make sure that the fan is the problem?

  The fan part number is ATZHG000500. Does anyone know if a fan with P/N ATZHG000100 is compatible with my laptop, or if I can use another fan?

  Thanks for your help,

  Hey Wiley,

  First of all it of normal that the fan starts and after a few seconds, or 1 minute stops. Depending on the programs you run again the departure of fan after a few seconds or minutes. So, theoretically, it of normal what is happening.

  But if your laptop is almost 5 years old, you should try to clean. So I can recommend jet of compressed air. This could blow out the dust from the cooling fans. It is very cheap but very useful.
  Check it!

  In addition, I think that the thermal paste should be renewed a technicians authorized laptop can help you and answer if the other fan part number fits in your laptop. :)

• CC 2015 Multicam freezes for a few seconds each time I pass cameras

  I am modifying a project of 4 cameras multicam in 2015 CC and whenever I click on a camera or select a camera with the keyboard shortcuts, reading about all the cameras freezes for a few seconds, then starts again. Audio playback is not interrupted. Of course, this is a very frustrating issue because I didn't happen on other projects making, and it is impossible to cut quickly from the camera to the camera when I don't see what I am cutting. It should not be a performance issue because the media on the SSD internal and rendered and replacement with Cineform has no effect on the issue.

  Turned off the coast of GPU acceleration reading the parameters of the project and the problem has been resolved.

• Whenever I open a creative cloud application adobe (such as Photoshop, Flash, AfterEffects etc.) it takes so long to open, and then after a few seconds, it freezes and I have to close the application ("force quit"). What happens here? Th

  Whenever I open a creative cloud application adobe (such as Photoshop, Flash, AfterEffects etc.) it takes so long to open, and then after a few seconds, it freezes and I have to close the application ("force quit"). What happens here? Thank you

  If it's all programs of cc,

  Uninstall (properly using the uninstall programs) all cc

  clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer

  Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud and use the app to install your programs of cc.

  If it's only some programs of cc who are broken, reset their preferences-

  Acrobat: https://forums.adobe.com/thread/1595848?start=0&tstart=0

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  hearing: https://forums.adobe.com/thread/1079494

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InCopy: https://forums.adobe.com/thread/526990

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

• New Photoshop CC 2015 crashes when opening: I've just updated to 2015 for CC. The program seems to open, but in a few seconds, I get a message telling me it has stopped working and closes. Help please!

  I just updated to 2015 for CC in Photoshop.

  The program seems to open, but in a few seconds, I get a message telling me it has stopped working and closes.

  Help please!

  If you use Windows comp, you can check below links:

  https://forums.Adobe.com/thread/1864032

  https://forums.Adobe.com/thread/1881048