laptop no longer meets the entry of a few seconds after starting

Similar Questions

• LaserJet Pro M201nw: M201nw LaserJet Pro no longer meets the ePrint requests, a few minutes after connecting to the network

  I've just implemented a new M201nw of the LaserJet Pro and it works fine, except for a problem with the printer with ePrint.

  I could implement Web Services on the printer and add it to as an ePrint, connected HP printer. Thanks to ePrint and Google Cloud Print printing for a few minutes after you have turned on the printer.

  But after a while, that can last from 3 to 10 minutes, the printer appears as "offline" in connected HP. If I check the settings ePrint to the printer through the front LCD or the web interface, for "ePrint Server Status", one of two things happening: sometimes there's just busy, or after a few seconds, I see "connection error. Check the Internet connection. »

  When I see the error message, I ask 'Tour ePrint temporarily turned off.' The printer will reconnect ePrint and work for a few minutes again.

  Local networking features of the printer such as network printing and web interface do not seem to have any problems.

  I don't think that the problem is related to my internet connection, which is reliable. I can monitor the traffic on my network and see communication between servers, XMPP from HP ePrint and the printer when the printer is working normally. When the printer has this problem, I still see the traffic coming in from HP but no traffic coming out of the printer. It's very strange and suggests part of the firmware of the printer does not work properly.

  Anyone else had problems with this printer model?

  Finally, I have determined the cause of the problem. While doing a follow-up, I discovered a router not authorized on the network itself advertising via the Protocol RIP (Routing Information) emissions. It seems that his presence finally confused the printer to know where to send the traffic. After turning off the emissions from the router, the ePrint feature, now works well.

• Program will not meet the entry

  Hello. I am writing an application for blackberry that uses multiple threads. The program works well, but does not meet the entry of events while the audio player and CPU threads is executed. The program continually audio bed from the microphone.

  On the Simulator (8310) and my actual device the program refuses to quit smoking. When I press-c arrow beside large button, or the off button, I can't program to close. If I close the simulator by closing the window, it crashes.

  Does anyone have ideas for why it might be locked if wrong?

  See you soon

  I think I found the problem. It was a bug and I was sleeping the main thread, which means that the listener to input from the user is not a chance to verify the entry.

• Given the 10.5.8 to 10.6 Snow Leopard upgrade.  Meet the Intel/memory minimum requirments.  After a full backup of course.  Anything I should be aware of before trying this?  Possible to the functions/effects?  Due to browser problems

  Given the 10.5.8 to 10.6 Snow Leopard upgrade.  Meet the Intel/memory minimum requirments.  After a full backup of course.  Anything I should be aware of before trying this?  Possible to the functions/effects?  My data (mp3, photos, documents, etc.) will not be affected?  I also have Windows for Mac.  It will not be affected?  Recent browser performance is untenable in weeks.  Safari 5.0.6.  Now even my Firefox is fact-zo.  Process seems simple enough, but thought I would ask a preview as many reviews on here seem to go anyway in regard to recommend it.  Thought that I have gathered a few comments before the trigger (or not) thank you to all those wh

  Just to start with this one:

  I also have Windows for Mac.

  I assume you mean that you run Windows in a virtual machine such as Parallels? If so, the machine virtual peut must be updated.

  When you install Snow Leopard, make sure to choose the option to do a custom install, so you can select the check box for Rosetta, or it will not install and PowerPC applications will not run. Not a huge deal if you miss. The first time you try to run a PPC application if Rosetta has not been installed, OS X offers to download and install it for you.

  Firefox works under Snow Leopard, which is the oldest version of OS X Mozilla always supports. Safari installed with SL will remain grossly outdated and should not be used.

  Nothing will happen to your documents, although I can't say with certainty that all the apps from third party that allows you to open will not be updated. They can. They cannot. For example, Office 2004 will run as long as Rosetta is installed.

• Computer laptop HP dv8t-1100, the display lights for thiry seconds about then goes black.

  I have a laptop HP dv8t-1100, the screen lights for thiry seconds approximately and then goes black, I can close the screen and quickly open it up and the screen comes back on?  This is my wife's computer and its in this perpetual loop.  Installed 2nd monitor and it works perfectly, never turns off (unless I turn it off).  I really hope you can help.

  Hello

  1. can you try updating the graphics driver to the latest version?

  For your machine, it is SP51290.

  FTP://ftp.HP.com/pub/SoftPaq/sp51001-51500/sp51290.exe

  2. can you try updating the bios to the latest version?

  For your machine, it is SP49106.
      http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-84660-1&cc=us&DLC=en&LC=en&OS=4063&product=4121367&sw_lang=

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• What should I do if Firefox crashes a few seconds after trying to load any material animation, be it ads on the side of Cheezburger websites, videos from YouTube or Hulu?

  I just bought a new HP Pavilion 23 inch all-in-one desktop, one without a modem on the side because everything is held upward. I'm usually on the technical plan and can understand things more easily. This, however, ahurir me because I think and know exactly how something to do, and I can't get a response at all. In any case I downloaded Flash once or twice more to try to solve this problem, but it has not disappeared. What it does is, each time I have want to watch [or don't want to look, in some side-of-site-video-ads] tab Firefox with the animation will be very sensitive, and any click on any Web site, such as the page next to the Cheezburger Web site or just the fact that load a video on YouTube or Hulu will cause Adobe Flash Player to plant within a few milliseconds. It lets you hear the first 5 seconds or so of the video before it stops [seconds after no response from Adobe, I might add] because Adobe does not and then crashing. In most cases where the video makes it crash, most of the time that the video image does not load before it crashes, or, even if an image is trying to load, it's just a green color dark forest instead of the image of the video on YouTube. If I'm looking for the non animated images and small GIFs, such as the humor Cheezburger websites or funnies to Touteleurope.fr, it does not crash on me. The majority of the videos I have watching is Anime related. I don't want to use Google Chrome, because I trust Firefox to catch other ads of arise, which is nice, but I might have to if it is not resolved.

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? The report please come back shortly.

• My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

  My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

  Don't know what you mean by vertically but it is normal that the  watch to display the time briefly when removed from the charger. If the  Watch is held horizontally with the number key of Crown and side on top can be turned. This is normal and is the point of view of bedside table.

• Why does my monitor Samsung SyncMaster B2330 start flashing after a few seconds after that, I was on the computer?

  Why does my monitor Samsung SyncMaster B2330 start flashing after a few seconds after that, I was on the computer?

  Hello

  What operating system do you use?

  Method 1:

  I suggest you check in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2:

  Troubleshoot monitor and video card

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  I suggest you to contact Samsung support center and check out.

  http://www.Samsung.com/AE/support/main/supportMain.do

  http://www.samsung.com/ae/support/search/supportSearchModelResult.do?menu=SP00&searchWord=SamsungSyncMasterB2330monitor&default_searchInputBox_value=Enter+model+number+or+keywords&searchInputBox=+Samsung+SyncMaster+B2330+monitor+

• Videos will play for a few seconds and start the buffering again.

  Buffering

  When I go to watch videos like on MSN or MSNBC buffer? Then play for a few seconds and start

  buffering again. Other Web sites that I can watch the video, but most of the videos to start the buffering. I run Windows Vista.

  Y at - it a cure?

  Thank you-Richard

  When I go to watch videos like on MSN or MSNBC buffer? Then play for a few seconds and start

  buffering again. Other Web sites that I can watch the video, but most of the videos to start the buffering. I run Windows Vista.

  Y at - it a cure?

  Thank you-Richard

  You download the video more slowly as you watch it. So when he says "buffering", he expects to catch up and download what you are willing to watch next.

  This type of internet connection do you have? Dialup? DSL? Cable? Whatever it is, it's too slow for what you do, or do you have some problem that it slows down.

• You tube problems and streaming video. System keeps the buffering, plays for a few seconds and starts the buffering all over again. Why and how can I fix

  On My Space, I can't watch/listen to the music streaming video and is similarly on YouTube.  The problem is persistent in all media streaming.  Videos open, play for a few seconds, then start buffering again. Why (?) How can this be fixed (?)

  Hello Maria,.

  Did you ever end up installing Silverlight or Flash?
  You can download and install the latest versions of both these sites:
  http://www.Silverlight.NET/
  http://get.Adobe.com/flashplayer/

• CC icon only appears in the taskbar for a few seconds and disappear it again. CC never opens.

  I installed Creative cloud on my Mac (10.10.5) and when I start the CC icon doesn't appears in the taskbar for a few seconds and disappear it again. CC never opens. I tried to uninstall and install several times.  (lightroom 4 has already been installed on the Mac)   Any help?

  Well in this case I would advice you Contact Customer Care

• A few minutes after starting windows, the laptop crashes

  I use a Toshiba laptop model: ppm81e, with windows Vista professional.
  Last night it was working fine, but when I woke up this morning, I found that the notebook is turned off. Apparently, for three hours, there was no electricity in our region and which caused the closing down.

  When I turn on the laptop, all load pretty normal as before. However, 4 to 7 minutes after the start, computer crashes laptop all at once. I can't disconnect, I can't restart, I can not load the Task Manager, and same taskbar are locked. At the beginning of the process hangs, I can switch between the windows using Alt + Tab but it is useless and will not help anything...

  I tried to use system restore, but unfortunately it says there is no restore point previous (I guess it is disabled).
  So I tried to use the repair using Recovery DVD that I did the first time I turned on the laptop.

  So, I inserted the recovery disc 1 DVD and boot from the DVD.
  Now he's stuck in a scene where says:
  ' Waiting for ODD vacancies...
  STRANGE drive f: loan.
  Check for support in the F: drive... »

  And it is about 30 to 40 minutes, that's all there is...

  Here is the screenshot:
  Screenshot 1
  Screenshot 2

  I don't know why the laptop is suspended without no reason that I can think of and I don't know how to get out of this mess, especially when my last shot (DVD release) adds another problem to the equation, instead of solving a.

  Please guide me.

  Hi Jean did.

  I suggest that you contact Toshiba support for help with the recovery process.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  If you are able to solve the problem of recovery process and the laptop still crashes at startup, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Lenovo Z500 turns off a few seconds after the round. He started for the second time.

  Hello

  For several days my Lenovo Z500 is a strange problem. When I push the turn on button laptop starts up and shuts down after a few seconds when the windows logo appears. When I push again the button it starts fine with no problems.

  I have a Windows Professional 10, everything was ok for a while and now I don't know how to solve my problem.

  I'm going to enjoy all the ideas.

  I thought to reinstall Windows, but maybe you know the solution to fix it.

  P.S. I have the latest version of the BIOS installed.

  Kind regards

  Albert

  I think I solved the problem.

  Problem has been activated "quick start" in the power settings.

  To turn off the quick start, follow these instructions:

  1. Open the start screen
  2. type po drank directly on the start screen (power buttons short for). It will take you directly to the applet "change what the buttons to" in the search results.
  3. Click on the link "Change settings that are currently unavailable" to put at the disposal of the shutdown options.
  4. Uncheck the enable (active)-quick start .
  5. That's all. Now the quick start feature is disabled.

  Now everything works fine, z500 boots each time correctly with the first run.

  Thanks LenBlazer.

• Stop the fan from the CPU in a few seconds (T440)

  CPU fan stop my T440 after a few seconds,

  When I turned computer on I heard his fan and air jet, but after a few seconds the fan seem to be collapsed, is this normal?

  Hello

  In cooling mode active, while the CPU temperature is low (usually about 55 degrees), the fan is beeng rotation at low speed, about 2000 RPM. Good quality fan is very silent on this mode.

  In any case, you could check if the fan is spinning by the hardware test tool, HWiNFO is an example.

  Of course, once the laptop is on, the fan starts to work at the POST stage too.