CC will continue to work if I'm going to WIN 10?

Similar Questions

• Mouse and touch pad will continue to work in tablet mode

  Hi, new to the Board of Directors

  Just received a large number of new laptops Yoga S1.

  All have this problem. How can we solve?

  I searched the Board and found others have had this problem, but the dates were old. Is there a new patch or fix?

  Thank you

  win the Enterprise 8.1 4 GB ram 64 bit

  OK, I fixed it.

  For people in the future who find this post...

  We had our own image to several laptops to yoga. I installed a new Synaptic/ultranav mouse driver and the problem was solved.

• Will be CUCM 8.6 continue to work between the change of license MAC and download rehosted license?

  Hi all

  I'll change a sensitive parameter of CUCM 8.6 and that will trigger a recalculation of the MAC license. Now, I would like to know if anyone knows weather and all has how long will continue to work until I have download the new license rehosted. Thanks in advance.

  You have a grace period of 30 days to download the new license when you do this.

  HTH

  Java

  If it helps, please note

  www.Cisco.com/go/pdihelpdesk

• Continue to work again on the iPad

  Hello guys, quick question. I send a file to InDesign CC on the iPad mockup, make some changes and save it. I will continue to work on the iPad again on the updated file. Is it possible? I don't understand how. Thank you very much

  He is currently a one-way workflow from iPad to computer. No way to receive changes made on your computer on the iPad.

• HA is located on the hosts; If the server vSphere is unavailable HA will always continue to work?

  Hello, I found the following question on the page Simonlong and I was sure it was incorrect.

  Which of the following are valid reasons for the deployment of vCenter Server on a virtual machine (choose 3)?

  A. vCenter Server must be deployed as a VM to migrate using VMotion

  B. vCenter Server must be deployed as a virtual machine to support the recovery by using the Site

  Recovery Manager

  C. vCenter Server must be deployed as virtual machines for joining a group Linked Mode

  D. vCenter Server must be deployed as a VM to be protected by a high availability

  E. vCenter Server must be deployed as a virtual machine to support using vCenter data

  Recovery

  Answer: ADE

  I didn't know that d was correct.

  So my question is, when HA is located on the hosts; If the server vSphere is unavailable HA will always continue to work?

  VMware HA is intalled on the side of ESX and can also operate without vCenter Server.

  vCenter Server is required to configure each host for HA, but then (per HA) is not necessary.

  André

• What browser will continue to support Mountain Lion

  Now that Google Chrome + chrome don't support more Cougar + Firefox is just announcing that from July 15, 2017, they will not support Mountain Lion + Opera, after version 37, also will not support ML, Safari 6.2.8 will be acceptable for use with the ML? Also what other browsers will continue to support ML? Thank you, Ken.

  Safari is part of the Mac OS x, so it will work.

  Other works too, but the (security) will stop eventually.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• CS6 crash bridge I have cleared the cache etc but continues to work slowly then it crashes again.

  CS6 crash bridge I have cleared the cache etc but continues to work slowly then it crashes again.

  Hi neilm,.

  When you have disabled the cache, did you do via preferences > Cache Purge? Rarely, this method seems to work for everyone. It hasn't for me, because he never removes all hidden. But now press Cmd-Opt-Shift/Ctrl-Alt-Shift while launching Bridge and purge the cache and preferences will generally produce as clean a sweep as possible without going through the uninstall/reinstall bit. You need to configure your preferences for bridge all over again, but that shouldn't take too long.

  If this does not stop smash, return and let us know your OS is and what version of bridge that you use. CS6, but the numbers that you see when you click on the bridge.

• How to attach sound to a button? who will continue this noise.

  Hello

  Working in Flash cs5. Can someone tell me how to join any button sound? will continue playing after click on his button.this should play up to 2-3 scenes to come. Working on the project who has 3 button with different sound.and the sound button contains a scene that has volume seter. I mean, if the user want to hear this sound in slow, medium or high pitch.the code set according to this. 2 sound.

  This site is like 'karaoke' just sound is classical music. She will continue on the software and user is going to sing a song.

  Can someone help me? By working on this months.and 2 recent it's hard for me to get the perfect answer.

  mySoundC.start (0,0);

  If you have the answer to the question, close this thread (response). Open a new one for your question of volume slider.

• The account will continue to be locked until it is approved and validate your information Apple ID. is it legitimate?

  The account will continue to be locked until it is approved and validate your information Apple ID. is it legitimate?

  Difficult to say with certainty with the small amount of data provided, but it certainly smells a scam.

• Work in offline mode, you are no longer connected to < servername >. You can continue to work normally

  Dear all,

  I get following error on my windows some machines xp with sp3.

  Message: Working offline, you are no longer connected to . You can continue to work normally

  then he must click again to synchronize, so we can print and access the map network drive.

  What can be the reason that I need your help.

  Concerning

  Naveed

  While you might get an answer in this forum, this could be a better place to ask your question...

  http://social.technet.Microsoft.com/forums/en-us/categories

  Tricky

• Close the lid on my laptop and continue to work on the external monitor.

  I am running Vista on a Dell Studio. I have connected external monitor. I would like to close the lid on the laptop and continue to work, but the com puter shuts off when I close the lid. I have a Dell Inspiron 6000 with an options for no action when the lid is closed.

  Hello

  Control Panel - Power Options - Choose top left - close cover.

  Also check the power Plans it after changing the Panel above - or to the right
  (White) Change Plan settings and also check the advanced settings.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Close the laptop and continue to work with external monitor

  Hi, I just bought a laptop HP15 and I want to work with an external monitor, keyboard, and mouse, but I have no space in my office for monitor and notebook open.

  The point is that when I close the laptop being the PC on, it shuts down suddenly and I can't continue to work.

  I can't find the way to establish that the laptop turns off when I close the screen.

  can someone help me?

  Thanks in advance

  Hello

  Let us hope that the next video help (very similar to Windows 7):

  https://www.YouTube.com/watch?v=ODxQchBckPU

  You can ignore the adv after a few seconds.

  Kind regards.

• currently connected adapter is not supported. system will continue on battery

  currently connected adapter is not supported. system will continue on battery

  BIOS is a newer A12. try to drain, but same problem. tried a different wall jack, same problem

  I don't have the battery connected more since its broken. I tried a different power adapter and its giving the same error. It only happens when I play games, meaning when it requires more power then my FPS fall and I can't play the game anymore. I think that its my motherboard. Help, please.

  Solved the problem. I swapped the video card in my m17x r4 (7970 m) friends

  No error message, no more FPS drop, reinstall the FANS.

• Deskjet 6122 driver will not properly work on a HP Proliant ML 150 6 Win Server

  Deskjet 6122 driver will not properly work on a HP Proliant ML 150 6 server running Window server 2003 Enterprise edition SP2. I have loaded driver 990c and it works, but the side two the 6122 print function will not work with 990c. Is there any solution for this?

  I'm afraid that there is no specific driver for this OS. The 990c driver will be the only option to get to work. I'm sorry.