CC2014 and proxy?

Similar Questions

• Blocking of the internal services of VPN and Proxy

  Hello

  I have some users with Windows 7 and MAC laptops inside my network domestic who is protected by the R7000.

  I'd like know if its possible to block sessions VPN and Proxy, initiated from these internal, to communicate with Internet computers.

  Thank you

  Try VPN Service to block.

• ip WLAN configuration - missing option to set the gateway and proxy...?

  Hello!

  I need to put the default gateway and the ip proxy addresses after you connect to an access point with wpa2.

  For example my htc incredible may do very well in the installation behind wifi opions.

  I think that he whould do a good idea to config for gateway, dns and proxy server server ip config wlan just after ssid-choosing the Tablet I remember 4 the next connection... a bit like the login made 4 me.

  Could sb here please give me a hint how to solve my problem of connection up there?

  I really like the A1 ThinkPad Tablet after using it 4 about 10 days now... 4 I can fully recommend the purchase and improve my gadget favorite... :-)

  (mod edit: changed the title of the post to match the wire because the question is about the thinkpad rather than the A1 ideapad Tablet Tablet)

  Under settings to go wireless and networks

  under Wi - Fi networks

  Press and hold the connection that you want to change

  Select 'change network '.

  Scroll profile

  Change the automatic to manual Proxy settings

  Enter your settings

  In this place you can also change your DHCP server static IP address

• Very Urgent: How to reinstall CC2014 AND CC2015 after reformatting drive system

  Hello

  I had last weekend a four time tries to draw a $ 4000 on my credit Card for security reasons, I have decided to re - format my system driver and reinstall all my programs.

  My concern is to be able to to re - install both versions of CC2014 and CC2015 without losing all the data from my past or actual projects.

  I must precise that my projects are stored on different drives, my C: drive is only dedicated to the system and the program installed their default.

  1 / I will be able to reinstall the CC2014 with the CC Manager program?

  2 / I am concerned by the fact that most of the programs have data stored in the directory of user names (see photo); This is the case for

  DAZ 3D or VideoCopilot.

  

  What happens to the data stored their? Should be first recorded the subdirectories and their contents to update manually after the reinstallion of programs?

  If you have any other suggestions/knowledge of data as well as their location to save until the system is reinstalled, please let me know.

  I must say that my banker consider as totally remiss that a subscriber should be forced to leave a number of credit card on the site, encrypted or not. We all know how skilled hackers are and that is a countryside for them to fly any Web site, as we have seen in the past even with the records of the Government.

  Thanks in advance to all to help me in this horrible situation.

  Claude

  1 / I will be able to reinstall the CC2014 with the CC Manager program?

  Yes, you'll find it under previous versions of the desktop application. You can even install CS6 if you wish.

  Firstly save the subdirectories and their contents to update manually after the reinstallion of the programs?

  Most of the contents of these folders will be re-created during installation, but your custom settings will be lost.

  You can use Edit > Presets in Photoshop to export your custom presets. (this does not include custom workspaces, which are located in the subfolder Workspaces)

  The best solution is to make backups of the Photoshop files in the screenshot and the copy on your custom settings for the installation of the new system. Do not copy over everything, just the things you need - like the presets folders and workspaces.

  There is also things like the Panel in the top folder actions, color settings, etc.

  You probably want to do the same thing for Illustrator and other programs.

• My plug-ins are defined in CC PS not PS CC2014 and the external editor to the LRCC should be changed to PSCC to use my plug-ins. How can I change the external editor to make CC PS instead of CC2014 PS

  My plug-ins are defined in CC PS not PS CC2014 and the external editor to the LRCC should be changed to PSCC to use my plug-ins. How can I change the external editor to make CC PS instead of CC2014 PS

  Hi Alik!

  Lightroom sets the latest version of Photoshop as external editor by default. However, you can set the CC Photoshop as an additional external editor in the preferences.

  

  You can then call it with a keyboard shortcut or via the menu.

  

• Closed: Jdev 11g and Web and Proxy browser setting

  Hello
  
  I need to download updates for the integration of JUnit BC4J jdeveloper and I am unable to do this due to error below:
  
  I have set up my Proxy HTTP Server (Tools-> Preferences-> Navigator Web and Proxy)... but when I authenticate... it fails with the error:
  
  No HTTP response received.
  java.net.ConnectException: tried everything: 1 address, but not able to connect via HTTPS to the server: login.oracle.com port: 443
  at weblogic.net.http.HttpsClient.openServer(HttpsClient.java:284)
  at weblogic.net.http.HttpsClient.openServer(HttpsClient.java:502)
  at weblogic.net.http.HttpsClient.New(HttpsClient.java:566)
  at weblogic.net.http.HttpsURLConnection.connect(HttpsURLConnection.java:242)
  to oracle.ide.webbrowser.HttpPing$ PingRunnable.run (HttpPing.java:109)
  at oracle.ide.webbrowser.ProxyOptions.doTask(ProxyOptions.java:854)
  at oracle.ide.webbrowser.HttpPing.ping(HttpPing.java:74)
  to oracle.ide.webbrowser.ProxySettingsPanel$ 5.run(ProxySettingsPanel.java:836)
  at java.lang.Thread.run(Thread.java:619)
  
  However if I click on ok and select help-> check for updates, I see all the updates/extension... but when, after the acceptance of the terms when I just download part
  He asks me 'Oracle Web account username and password'... even her correct username/pwd... download fails with the error
  "An error occurred downloading updates... The Oracle Web account user name and password are incorrect.
  
  now:
  1. my Oracle Web account user name and password is correct because I am able to connect and download from OTN animals with the same credentials.
  2. same Oracle Web account Username and Password credential works in my system of colleagues.
  3 HTTP Proxy Server details are correct and the user name and password... but some how JDev accepts it.
  4. I tried with several user/pwd for the HTTP Proxy name, but it does not work for this instance of Jdev.
  
  I don't know what could be wrong...
  
  Thank you
  
  Published by: amseth on July 26, 2010 11:52

  First install of junit. Make sure that you get the v11, v10

• What is proxy and proxy port host

  I want to know host proxy and firefox proxy port

  Once you have configured Ultrasurf you can go into the Firefox proxy settings and set the 127.0.0.1 Proxy host and port of the proxy to 9666. Please check this web page for a step by step http://www.how-to-hide-ip.info/2009/02/19/how-to-configure-firefox-to-work-with-ultrasurf/ guide.

• UTM and proxy server

  I'm about to install the UTM on my network. Currently, my users go through a proxy server, which, in turn, goes through the firewall. We use the proxy server for logging and internet acceleration.

  I think to just replace my firewall with utm. Anyone know of any issue to users via the proxy server running?

  user-> proxy-> utm-> internet server

  The only thing that I know that this will not work as TMU TMU groups only will receive requests from proxy server.

  dbgman,

  Don't know what proxy you use, but I have Squid running on a Linux-based NAS system. All browsers are configured to point to the proxy server and it works fine.

  As you say, the groups are not so useful when using a proxy.

• WRT54G v7 color Web sites and proxy servers

  I have a wrt54g.when I am connected with ethernet its all right, BUT when I'm connected wireless of some Web sites cannot open and some proxy servers can not be Born like (sjphone, xfire)

  can someone help me please?

  Please, trigger ports 443 to 447 and change the MTU to 1365 by opening the router configuration page.

• Client certificate authentication and proxy HTTPS WSA

  Hello

  on a clients site, we have a virtual Proxy WSA with WCCP running behind a firewall of ASA. Only we are facing a problem: the customer has a site that authenticates the client through the certificate. It does not work. If I dasable the transparent proxy for this host, everything works fine.

  I solved it now bypassing the proxy server for the spicific site. Is there another solution to allow clients to authenticate using certificates to a Web site?

  Hello

  Does it means that websites (some sites) request for client certificate to authenticate during the SSL negotiation?

  If this is true, can you check your option since default CLI interface HTTPS when HTTPS servers request certificate of the client during the handshake, WSA will respond with unavailable certificate and the handshake will normally be breaks.

  To check this:

  1. log in to the CLI
  2. control of type advancedproxyconfig
  3. type HTTPS
  4. keep pressing enter to accept the value by default until you reach "measures to be taken when the HTTPS servers request certificate of the client during the handshake:" and change it to "get through the operation.

  5. keep pressing enter until the initial scope guest
  6. type commit to save the change.

• OnPlus and Proxy

  This device will work if the client's site uses a proxy server?

  Thank you

  Tom

  If the site requires the use of a HTTP/HTTPS proxy, then the answer is no, OnPlus does not support the use of HTTP/HTTPS proxy servers. The device would fail to download the original firmware and also fail to download future updates.

  The list of ports required to be opened between the device and the Wan are documented in the Guide to the OnPlus:

  * The port UDP 53 (DNS) (except if local DNS servers are specified by connecting to the device)

  * Port TCP 80 (HTTP)

  * The port UDP 123 (NTP) (except if local NTP servers are specified by connecting to the device)

  * Port TCP 443 (HTTPS)

  * Port 14931 UDP (monitoring of the performance of the Wan via the Agent network OnPlus)

  11300 via TCP 11400 (heart rate and Tunnels) UDP ports

  If only HTTP is blocked (direct HTTPS is available for devices on the network), then it is possible that if the device was activated on another network, it might work, but it would be rejected when downloading future updates. This would not have cared, port 80 must be open for the agent to function properly. If the HTTP/HTTPS proxy is a general requirement for your customers, please let us know!

  -mike

• Cisco VPN client, PIX, and proxy

  Hi.I have problem in my company. We have users that go through a proxy server located in the DMZ of a PIX to the internet (allowed through the ACL of the DMZ on the outside, etc.). Which works very well.

  The problem arises when they use a Cisco VPN client to connect to another company, and they can no longer access the Internet, but may work via VPN to a remote site (client has been authorized by the Cisco PIX). Everything returns to normal when they no longer use the VPN client.

  Any ideas why this would happen?

  Without the proxy, browsing the internet via the vpn connection, or split tunnel is configured and you are leaving locally. If split tunnel is configured, the ip address of proxy server can overlap with the remote protected network.

  Fortunately, it is easy for you to know how the vpn is configured, just check the route details of vpn client statistics tab.

  Verify that the routing table local pc will also help you to solve this problem.

• Async AS2 in B2B of Oracle 11 g and proxy reversed - how to indicate the external URL of DND

  Hello

  We have a SYNCHRONIZATION connections of AS2 work via proxy leaving and entering proxy reverse. No problem. But in AS2 header of our messages when ASYNC DND is enabled B2B 11 G sends our internal hostname (not accessible from the internet) as URL of return of DND. Thus, our partners cannot return the MDN

  How can I replace it? In 10g I could set the channels on host partner and use them in the conventions, but now they are only 'internal' type and cannot by basic HTTP.

  (Suggestions appreciated - I searched the documentation, forums and Oracle Support better than I could, but I was unable to find something useful)

  Thanks in advance

  Kamil

  Okay, I think I found the answer.

  The only way to do this correctly is to put the URL of the proxy to the Recepit delivery on the chanel TP Option. This means that in the future, any changes made to the external URL will require that update us all affected chanel TP configurations.

  Kind regards

  Kamil

• 4 K Pro Res mast and PROXY

  Hello
  I shot 4 k with two cameras. I then synced the material using PLURAL EYES. Now the next question:

  When I import the movie synced PE file, first today creates the sequence "in sync."
  And records three more.
  .

  1 "camera 1

  2 "camera 2.

  
  3 "" audio Recorder ""

  Now, how to produce the proxy now material so I can then edit with them?

  And if I'm done I need to move to full quality how can I do this?

  Reg and thank you

  Markus from Berlin

  Select all images in 1 folder camera (camera 2) right-click / proxies / create proxies...

  Export is done automatically with the original film.

• a special character and Proxy authentication

  Hello.

  Is it possible that le proxy record on creative cloud only without Special characters work? or used creative cloud only English keyboard layout?

  Où Creativ cloud stores le proxy Settings?

  greetings.

  Hello

  This link might help: Cloud with proxies - evidence and solution

  Kind regards

  Sheena