What is proxy and proxy port host

Similar Questions

• I buyed a dominion in godaddy and I'm hosting at BusinessCatalyst; What server name, I put, or what I need to do? Thank you

  I buyed a dominion in godaddy and I'm hosting at BusinessCatalyst; What server name, I put, or what I need to do? Thank you

  You can find it in the doc... User manual

• I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  If you try to send or receive messages, you may receive an error message similar to the following error message, which indicates that your Post Office Protocol version 3 (POP3) or host SMTP Simple Mail Transfer Protocol () is not found:

  The host hostname is not found. Please check that you have entered the server name correctly. Account: AccountName, Server: servername, Protocol: POP3, Port: secure (SSL): no, error 11001, error 0x800CCC0D Socket number

  In addition, you cannot ping or establish a Telnet connection to the mail server.

   
  This problem may occur if you have the firewall from Zone Labs such as ZoneAla software...
  This problem may occur if you have firewall software from Zone Labs such as ZoneAlarm or ZoneAlarm Pro, installed on your computer. These programs may prevent communication with your e-mail server.

  RESOLUTION

  To resolve this problem, remove the software firewall from Zone Labs of your compu...
  To resolve this problem, remove the firewall from Zone Labs of computer software. To do this, see the program documentation or contact Zone Labs at the following of Zone Labs Web site for more information:

  http://www.zonelabs.com/services/support.htm (http://www.zonelabs.com/services/support.htm)

  MORE INFORMATION

  For more information about ZoneAlarm or to contact Zone Labs, see what follows...
  For more information about ZoneAlarm or to contact Zone Labs, see the following Web of Zone Labs Web site:

  http://www.zonelabs.com (http://www.zonelabs.com)

  For more information on how to resolve a similar error message when you use Microsoft Outlook on a computer that is configured as an ICS Internet (ICS) client, click on the number below to view the article in the Microsoft Knowledge Base:

  252322 (http://support.microsoft.com/kb/252322/EN-US/) OL2000: (CW) Error Message: The Server could not be found using ICS Connection

  For more information on how to solve an error similar to Microsoft Outlook Express and ZoneAlarm, click on the number below to view the article in the Microsoft Knowledge Base:

  274456 (http://support.microsoft.com/kb/274456/EN-US/) error finding POP3 or SMTP servers when you send or receive e-mail Messages

  The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  later ducdive

• Cannot ping port host MD3000i on RC0

  Hello

  I have set up my iSCSI network, as suggested in this post:

  http://en.community.Dell.com/TechCenter/storage/w/wiki/MPIO-to-PowerVault-MD3000i-with-Microsoft-iSCSI-initiator.aspx

  I can only ping the ports of controller RAID 1 (two ports). All of my iSCSI traffic is drunk through the controller. Windows Server 2008R2 (R710/810), but also an ESXi 4.1 cluster (R610 and PE2950) access the dedicated iSCSI network. I contacted the support a few weeks ago, and they have replaced the MD3000i RAID controllers as well as the background. They are insistent that there is a configuration problem and would not assist any more beyond to send me links suggested configs. I went through the Setup on the R810 (Windows 2008R2) from scratch. This has not produced different results. Then I updated all drivers (BCM5709Cs) NETWORK card and software on all hosts, successfully restarted the MD3000i and the two MD1000s bike powered two switches HP Procurve 1400 and restarted all hosts. I can't always ping RC0. I Putty and captured RC0 boot logs, but it was not obvious to me. Here are the logs of boot:

  -=<###>=-
  Set the interface lo0... done

  Autonomous 9768 symbols added.
  Error
  03/26/13-16:44:29 (GMT) (tRootTask): NOTE: I2C transaction returned 0x0423fe00

  ATTENTION: Reset by spare controller

  Current date: 26/03/13 time: 09:26:15

  Send Change Service Interface rate or baud
  03/26/13-16: 44:46 (GMT) (NCDB): NOTE: sequence SOD is Normal, 0
  03/26/13-16: 44:46 (GMT) (NCDB): NOTE: SOD: removed host SAS from index 0
  03/26/13-16: 44:46 (GMT) (NCDB): NOTE: in iscsiIOQLIscsiInitDq.  iscsiIoFstrBase = 0 x 0
  03/26/13-16: 44:46 (GMT) (NCDB): NOTE: turn on seeing failure summary tray
  03/26/13-16: 44:48 (GMT) (NCDB): NOTE: SYMBOL: SYMbolAPI registered.
  esmc0: event LinkUp
  03/26/13-16: 44:50 (GMT) (tNetCfgInit): NOTE: the loan network
  03/26/13-16: 44:51 (GMT) (NCDB): NOTE: channel initiating Drive: ioc:0 bringup
  03/26/13-16: 44:54 (GMT) (NCDB): NOTE: the Firmware Version of the IOC: 00-24-63-00
  03/26/13-16: 45:17 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan: 0 phy:0 prevNumActivePhys:2 numActivePhys:2
  03/26/13-16: 45:17 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan: 0 phy:1 prevNumActivePhys:2 numActivePhys:2
  03/26/13-16: 45:17 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan: 1 phy:2 prevNumActivePhys:2 numActivePhys:2
  03/26/13-16:45:18 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan: 1 phy:3 prevNumActivePhys:2 numActivePhys:2
  03/26/13-16:45:18 (GMT) (tSasCfg021): NOTE: path of the Alt up - chan: 0 phy:18 itn:1 controller
  03/26/13-16:45:18 (GMT) (tSasCfg022): NOTE: path of the Alt up - chan: 1 phy:16 itn:2 controller
  03/26/13-16:45:18 (GMT) (IOSched): NOTE: discoveredEncl: enclosure: 1, enclProp: x2c50104, trayId: slotCount 2:15
  03/26/13-16: 45:19 (GMT) (NCDB): NOTE: IonMgr: Drive Interface enabled
  03/26/13-16: 45:19 (GMT) (NCDB): NOTE: SOD: instantiation Phase complete
  03/26/13-16: 45:19 (GMT) (NCDB): NOTE: controller between open Communication channels
  03/26/13-16: 45:19 (GMT) (IOSched): NOTE: initiator of news: 1 - channel: 1, devHandle: x2c, SAS address: 590b11c41a9d8b00
  03/26/13-16: 45:19 (GMT) (tSasDiscCom): NOTE: complete a discovery SAS task created
  03/26/13-16: 45:19 (GMT) (NCDB): NOTE: LockMgr role is slave
  03/26/13-16: 45:19 (GMT) (IOSched): NOTE: discoveredEncl: enclosure: 1, enclProp: x2c9516c, trayId: slotCount 2:15
  03/26/13-16: 45:19 (GMT) (IOSched): NOTE: new initiator: 2 - channels: 0, devHandle: x1a, SAS address: 590b11c41a9d8b01
  03/26/13-16: 45:21 (GMT) (IOSched): NOTE: discoveredEncl: Speaker: 2, enclProp: x2c8f730, trayId: 1, slotCount: 15
  03/26/13-16: 45:21 (GMT) (sasCheckExpanderSet): NOTE: Expander Firmware Version: 0116-e05c
  03/26/13-16: 45:21 (GMT) (sasCheckExpanderSet): NOTE: address SAS Expander: salvation = Low = xf6ac8d10 x5848f694
  03/26/13-16: 45:21 (GMT) (tSasDiscCom): WARN: SAS: Initial full time of discovery: 33 seconds
  03/26/13-16: 45:21 (GMT) (IOSched): NOTE: discoveredEncl: Speaker: 2, enclProp: x2c66ad4, trayId: 1, slotCount: 15
  03/26/13-16: 45:22 (GMT) (NCDB): NOTE: spmEarlyData: from alternate data
  03/26/13-16: 45:22 (GMT) (NCDB): NOTE: WWN baseName (valid ==> SigMatch) 00040026-b95795de
  03/26/13-16: 45:23 (GMT) (NCDB): NOTE: ionEnableHostInterfaces is waiting for a channel lends itself
  03/26/13-16: 45:26 (GMT) (NCDB): NOTE: ionEnableHostInterfaces expected 3800ms for a channel lends itself
  03/26/13-16: 45:26 (GMT) (NCDB): NOTE: IonMgr: Host Interface enabled
  03/26/13-16: 45:26 (GMT) (NCDB): NOTE: SOD: pre to complete initialization Phase
  03/26/13-16: 45:47 (GMT) (NCDB): NOTE: ACS: autoCodeSync(): beginning of the process. Comm mode: 0, State: 1
  03/26/13-16: 45:47 (GMT) (NCDB): NOTE: SOD: complete Phase initialization Code synchronization
  03/26/13-16: 45:48 (GMT) (NvpsPersistentSyncM): NOTE: persistent storage NVSRAM updated successfully
  03/26/13-16: 45:48 (GMT) (NCDB): NOTE: initialization complete USM Mgr with 0 records.
  03/26/13-16: 45:49 (GMT) (NCDB): NOTE: BDU - received 1 small files
  03/26/13-16: 45:49 (GMT) (NCDB): NOTE: BDU - received 0 records of great
  03/26/13-16: 45:50 (GMT) (NCDB): NOTE: acquire 0.035 dry
  03/26/13-16: 45:53 (GMT) (NCDB): NOTE: QLStartFw: FW drive download image 03.00.01.47 033eab00 4c0c8 bytes, result 0
  03/26/13-16:45:55 (GMT) (tRAID): NOTE:  ********************************************************************************
  03/26/13-16:45:55 (GMT) (NCDB): NOTE: Application target QLogic, 2.01.08 Version 2005-06-13 (W2K)
  03/26/13-16:45:55 (GMT) (NCDB): NOTE: iSCSI Target Application
  03/26/13-16:45:55 (GMT) (tRAID): NOTE:   ********************************************************************************
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: iSNS Server 0.0.0.0:3205
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: ISNSServerIPv6Addr 00:00:00:00:00:00:00:00: 3205
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: iSCSI name iqn.1984 - 05.com.dell:powervault.md3000i.60026b90005795de000000004b2ae7b6
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: port = 0, turn on IPv4 = 1, turn on IPv6 = 0
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: 10.182.233.250:3260 IP address
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: Firmware waiting for DHCP lease.  State 18
  03/26/13-16: 45:56 (GMT) (NCDB): NOTE: QLInitializeFW: 18 FwState 000/010 of time
  03/26/13-16: 45:57 (GMT) (NCDB): NOTE: QLInitializeFW: 10/01/00 18 FwState of time
  03/26/13-16: 45:58 (GMT) (NCDB): NOTE: QLInitializeFW: 10/02/00 18 FwState of time
  03/26/13-16: 45:58 (GMT) (IOSched): NOTE: QLIsrDecodeMailbox: Port 0 bind upward.
  03/26/13-16: 45:59 (GMT) (NCDB): NOTE: QLInitializeFW: 10/03/00 FwState time 0
  03/26/13-16: 46:00 (GMT) (NCDB): NOTE: QLInitializeFW: port = 1, turn on IPv4 = 1, turn on IPv6 = 0
  03/26/13-16: 46:00 (GMT) (NCDB): NOTE: QLInitializeFW: 10.182.232.250:3260 IP address
  03/26/13-16: 46:00 (GMT) (NCDB): NOTE: QLInitializeFW: Firmware waiting for DHCP lease.  State 18
  03/26/13-16: 46:00 (GMT) (NCDB): NOTE: QLInitializeFW: 18 FwState 000/010 of time
  03/26/13-16: 46:01 (GMT) (NCDB): NOTE: QLInitializeFW: 10/01/00 18 FwState of time
  03/26/13-16: 46:02 (GMT) (NCDB): NOTE: QLInitializeFW: 10/02/00 18 FwState of time
  03/26/13-16: 46:03 (GMT) (NCDB): NOTE: QLInitializeFW: 10/03/00 FwState 18 time
  03/26/13-16: 46:03 (GMT) (IOSched): NOTE: QLIsrDecodeMailbox: Port 1 link up.
  03/26/13-16: 46:04 (GMT) (NCDB): NOTE: QLInitializeFW: 10/04/00 FwState time 0
  03/26/13-16: 46:05 (GMT) (NCDB): NOTE: PM - reading DB (record 1.0)
  03/26/13-16: 46:08 (GMT) (t1): NOTE: QLTA_HandleTeb: Connect ports 0
  03/26/13-16: 46:08 (GMT) (t3): NOTE: QLTA_HandleTeb: port 1 link up
  03/26/13-16: 46:09 (GMT) (t2): WARN: QLTA_Handleteb: 72 event Code.
  03/26/13-16: 46:09 (GMT) (t4): WARN: QLTA_Handleteb: 72 event Code.
  03/26/13-16: 46:09 (GMT) (NCDB): NOTE: CCM: sodMirrorCheckIn() waiting alt cache check in mirror...
  03/26/13-16: 46:10 (GMT) (NCDB): WARN: CCM: initMirrorAltChkIn() may not reflect
  03/26/13-16: 46:11 (GMT) (NCDB): NOTE: CCM: initialize(): cache configuration
  03/26/13-16: 46:11 (GMT) (NCDB): NOTE: from UWManager::initialize, 510, the invalid index - 1 entries
  03/26/13-16: 46:11 (GMT) (NCDB): NOTE: NVSRAM IW queue size is 0
  03/26/13-16: 46:16 (GMT) (NCDB): NOTE: RTR: IO released
  03/26/13-16: 46:17 (GMT) (NCDB): NOTE: SOD: initialization Phase complete
  ==============================================
  Title: Disk Array Controller
  Copyright 2005 - 2011 LSI Logic Corporation, all rights reserved.

  Name: RC
  Version: 07.35.39.64
  Date: 16/08/2011
  Time: 14:24:32 CDT
  Models: 1532
  Manager: devmgr.v1035api01.Manager
  ==============================================

  03/26/13-16: 46:17 (GMT) (NCDB): NOTE: sodMain of the sequence is complete, elapsed time = 90 seconds
  03/26/13-16: 46:17 (GMT) (NCDB): NOTE: complete sodMain
  03/26/13-16: 46:17 (GMT) (EventGateManager): WARN: GMOS: 8 events of creation for objects that already exist

  IPs I can ping: 10.182.232.251 and 10.182.233.251 (both on RC1). I can even ping all other iSCSI host initiator ports! I hope I gave enough information about me for some answers. Please advise!

  Thank you.

  What are the 4 IP addresses and subnets for the 4 the MD3000i iSCSI ports?

  ISCSI controller 0 port 0?: (guess 10.182.232.250/24)

  ISCSI 0 1 controller port?: (guess 10.182.233.250/24)

  Controller 1 iSCSI port 0: 10.182.232.251 24 (hypothesis on the mask)

  Port of iSCSI controller 1 1: 10.182.233.251 24 (hypothesis on the mask)

  Wiring must be:

  iSCSI 1 Switch / VLAN:

  ISCSI controller 0 port 0

  ISCSI controller 1 port 0

  Server 1 iSCSI port 0 (in the subnet 10.182.232.x 24)

  etc.

  iSCSI Switch 2 / VLAN:

  ISCSI 0 1 controller port

  ISCSI 1 1 controller port

  Server 1 iSCSI port 0 (in the subnet 10.182.233.x 24)

  etc.

  To test iSCSI on controller 0 port, take a cell phone with a Gbit ethernet port (any modern laptop should have it), connect the ethernet controller iSCSI 0 0, 10.182.232.100 port value IP from the laptop and try to ping 10.182.232.250 (assuming that it comes to the INVESTIGATION period on this port). If it works, change the IP of the laptop to 10.182.233.100 and move the cable to the iSCSI port 1 and try to ping 10.182.233.250 and see if you can ping the IP address.

  If these two are working, the first thing that comes to mind is that the port 0 and 1 have their swapped cables.

• primary and standby - port listening and listening DB port scan

  Hello

  I have two node RAC (11.2.0.3) on Windows 2008R2 and this will serve as a primary database. We have defined scan port listener and listener of the DB in 1521. Now, let's put standby database in two node RAC on virtual machines. Waiting for the database, the two scan listening port and listening DB port should be the same (1521) as main or should we give another port number.

  Hello

  Is it possible to change the IP address to SCAN listener or listener to DB.

  Yes, it is possible to change IP address to scan and listener of the DB.

  To scan all what you need to do is remove the resource from scan

  srvctl remove scan_listener

  srvctl remove scan

  Once did make changes to the OS level (in the file DNS or hosts) according to what is used and add back scanning resources

  srvctl add scan n [k ] [ s /[/ if1 [| if2 |...]]]

  srvctl add scan_listener [-l ] [-s] [Pei [TCP:][/ IPC:] [/ NMP:] [/ TCPS:] [/ SDP:]]

  Or if you have a different set of intellectual property is configured, then you can do the following without remove and add the resources back

  srvctl change scan - n

  srvctl change scan_listener {u: Pei [TCP:][/ IPC:] [/ NMP:] [/ TCPS:] [/ SDP:]}

  And you can also change the listener node as follows intellectual property details

  srvctl change applications {[n - one /[/ if1 [| if2 |...]]] |} [-S /[/ if1 [| if2 |...]]]} [u {public static | dhcp | mixed}] [-e ] [ -l ] [-r ] [-t [:][,[:]...]] [-v].

  srvctl change the listening port [-l ] [o ] [Pei "[TCP:][,...]"] [/ CIB :] [/ NMP :] [/ EPTC :] [/ SDP :] "] [-u ] [-k ]

  I'll put the listener to SCAN and listening port of DB in 1521 in Physical standby database as well. Regarding the information you provided that this should also be acceptable. Please provide your opinion on that.

  Yes, it is acceptable, you can proceed to the same

  I hope that the above answers your question.

  Kind regards

  Vautrin - Oracle

• My Icloud account does not work. As soon as I try to connect my PC know "this browser is not supported. What went wrong and what can do?

  My Icloud account does not work. As soon as I try to connect my PC know "this browser is not supported. What went wrong and what can do? I previously used the same connection to my account for a long time without any problem. My PC I have a tie with Windows 8

  < personal information deleted by host >

  Hi bengtfrombelgentier,

  Welcome to the communities of Apple Support! I'm sorry to hear that you are experiencing these problems access iCloud. If you are unable to access iCloud.com due to an error of supported browser, you can check the browser requirements set out in the following article:

  Requirements for iCloud - Apple Support

  Concerning

• local web development issue: server and ampps port 80 conflict

  Hi all

  I want to set up a development environment web very nice for me on my MacBook Air.

  I want to run apple server and ampps, but both use the same port number 80.

  Is it possible to create a set up so that the two can run on the same computer?

  If so, how?

  Thank you and happy holidays!

  Basically, no.   Two different TCP servers cannot use the same port at the same time.  It's a basic conflict.

  OS X is provided with Apache, and that works fine.   OS X Server provides tools to configure, manage, and extend the Apache environment.   Add on packages it as AMPPS, MAMP or XAMPP provide their own versions of Apache and other pieces.

  Most web servers can be launched on a port range, and it's usually easier with the package of additional components and the built-in OS X Apache Web server.

  OS X Server is rarely used on laptops, as OS X Server works usually better with static IP addresses, and laptops generally roam and thus generally have dynamic IP DHCP addresses.

  TL; DR: The standard port and a virtual host, or use the standard web server or Add on to a port of type variant.

• This IP address has hacked my email address and send spam to all my contacts today 65.55.75.151 I did a trace and it says host domain in Microsoft.

  This IP address has hacked my email address and send spam to all my contacts today 65.55.75.151 I did a trace and it says host domain in Microsoft. Can someone explain what this is?

  Hello

  The question you have posted is related to Windows Live and will be well suited in the Windows Live Forum. Click on the link below.

  Windows Live Solution Center

  http://www.windowslivehelp.com/product.aspx?ProductID=1

• Cannot access internet, check HTTP, FTP and HTTPS port settings

  Using Windows XP, cannot access internet.  The problems notified that Windows cannot connect Internet using HTTP HTTPS or FTP.  Said that it's probably caused by the settings of the firewall.  Adiveses to check the settings of the firewall for HTTP (80) port, the HTTPS port (443) and FTP port (21).  Did not inform how to do this.

  Any suggestion would be appreciated.

  Hello

  · What version of internet explore are you working on?

  · Were there any changes made on the computer before the show?

  I suggest you try the steps listed in the links below: how to manually open ports in Internet Connection Firewall in Windows XP: http://support.microsoft.com/kb/308127

  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer: http://support.microsoft.com/kb/956196

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users: http://support.microsoft.com/kb/875357

• Reference Dell powerconnect 5524 cannot ping between coelio and trunk port

  Hello...

  We set up a new switch of 5524 I untagged on vlan 20 and access ports where vlan 20 I allowed. I created a computer on the access port on the same trunk port ip net... cant ping beween them. I'm no expert of switch, so I wonder what I missed. I did the same thing on a dell old 3524 and it works directly...

  Here's the port config I tried to do a ping beween is 6 and 10 ports

  (Another thing, how how to remove):

  switchport mode trunk
  switchport access vlan none)

  Any help would be greatly appreciated!

  interface vlan 1
  IP 88.131.90.252 255.255.255.240
  !
  interface vlan 5
  the name 'SCE CJA'
  !
  interface vlan 6
  the name "out of Tele2.
  !
  interface vlan 7
  name "Outside Telenor"
  !
  interface vlan 8
  name "TDC Multivrf"
  !
  interface vlan 20
  TDC-CISCO-LAN name
  !
  [0mMore: , quit: q or CTRL + Z, one line: interface vlan 21]
  the name "FW inside."
  !
  interface vlan 99
  name «FW sync»
  !
  gigabitethernet1/0/1 interface
  Description CPE1
  switchport access vlan 5
  !
  interface gigabitethernet1/0/2
  Description CPE2
  switchport access vlan 5
  !
  interface gigabitethernet1/0/3
  Df description
  spanning tree portfast
  switchport mode trunk
  switchport access vlan no
  !
  interface gigabitethernet1/0/4
  Description Oupps-cb2
  [0mMore: , quit: q or CTRL + Z, a single line: spanning tree portfast]
  switchport mode trunk
  switchport access vlan no
  !
  interface gigabitethernet1/0/5
  Upp-ccm1 description
  spanning tree portfast
  switchport access vlan 20
  !
  interface gigabitethernet1/0/6
  Oupps-ccm2 description
  spanning tree portfast
  switchport access vlan 20
  !
  interface gigabitethernet1/0/7
  Tdc-multivrf1 description
  switchport access vlan 8
  !
  interface gigabitethernet1/0/8
  TDC-multivrf2 description
  switchport access vlan 8
  !
  [0mMore: , quit: q or CTRL + Z, one line: interface gigabitethernet1/0/9]
  Description Oupps-cb-tq03
  spanning tree portfast
  switchport mode trunk
  !
  interface gigabitethernet1/0/10
  Description Oupps-cb-tq04
  spanning tree portfast
  switchport mode trunk
  !
  interface gigabitethernet1/0/11
  Tele2-outside description
  switchport access vlan 6
  !
  interface gigabitethernet1/0/12
  Tele2-outside description
  switchport access vlan 6
  !
  interface gigabitethernet1/0/13
  Telenor-outside description
  switchport access vlan 7
  !
  [0mMore: , quit: q or CTRL + Z, one line: interface gigabitethernet1/0/14]
  Telenor-outside description
  switchport access vlan 7
  !
  interface gigabitethernet1/0/15
  Description Word-Oupps-fw-tq01-inside
  switchport mode trunk
  !
  interface gigabitethernet1/0/16
  Description Word-Oupps-fw-tq02-inside
  switchport mode trunk
  !
  interface gigabitethernet1/0/17
  FW-sync description
  switchport access vlan 99
  !
  interface gigabitethernet1/0/18
  FW-sync description
  switchport access vlan 99
  !
  interface gigabitethernet1/0/19
  Description Word-Oupps-fw-tq01-outside
  [0mMore: , quit: q or CTRL + Z, a single line: switchport mode trunk]
  !
  interface gigabitethernet1/0/20
  Description Word-Oupps-fw-tq02-outside
  switchport mode trunk
  !
  interface gigabitethernet1/0/22
  FW-Sync description
  switchport access vlan 99
  !
  interface gigabitethernet1/0/23
  Description Word-Oupps-FW-tq01-outside
  192.168.11.1 IP address 255.255.255.0
  switchport mode trunk
  !
  interface gigabitethernet1/0/24
  Description Word-AIN-LAN-SW
  switchport access vlan 20
  !
  IP route 0.0.0.0 0.0.0.0 88.131.90.241

  [0mMore: , quit: q or CTRL + Z, a single line:]

  Information of VLAN

  The name of the VLAN Tag Ports Ports unmarked Type permission
  ---- ------------ ------------------ ------------------ --------- -------------
  1 1 article gi1/0/3-4, default required
  Article gi1/0/9-10
  item in gi1/0/15-16,
  item in gi1/0/19-21,
  item in gi1/0/23,
  item in gi1/0/25-48,
  TE1/0/1-2.
  GI2/0/1-48.
  TE2/0/1-2.
  IG3/0/1-48.
  TE3/0/1-2.
  IG4/0/1-48.
  TE4/0/1-2.
  IG5/0/1-48.
  TE5/0/1-2.
  GI6/0/1-48.
  TE6/0/1-2.
  gi7/0/1-48.
  TE7/0/1-2.
  gi8/0/1-48.
  TE8/0/1-2, m 1-32
  5 CPE TDC article gi1/0/3-4, item in gi1/0/1-2 permanent required
  [0mMore: , quit: q or CTRL + Z, one line: article gi1/0/9-10]
  item in gi1/0/15-16,
  item in gi1/0/19-20,
  item in gi1/0/23
  6 outside section gi1/0/3-4, item in gi1/0/11-12 permanent required
  Tele2 item in gi1/0/9-10,
  item in gi1/0/15-16,
  item in gi1/0/19-20,
  item in gi1/0/23
  7 outside article gi1/0/3-4, item in gi1/0/13-14 required permanent
  Telenor item in gi1/0/9-10,
  item in gi1/0/15-16,
  item in gi1/0/19-20,
  item in gi1/0/23
  8 TDC Multivrf item in gi1/0/3-4, item in gi1/0/7-8 permanent required
  Article gi1/0/9-10
  item in gi1/0/15-16,
  item in gi1/0/19-20,
  item in gi1/0/23
  TDC-CISCO-LA 20, article gi1/0/3-4, item in gi1/0/5-6, item in gi1/0/24 required permanent
  N item in gi1/0/9-10,
  item in gi1/0/15-16,
  [0mMore: , quit: q or CTRL + Z, one line: item in gi1/0/19-20,]
  item in gi1/0/23

  In safe mode the PVID is 1 VLAN by default. You can do this by entering the command #switchport trunk vlan native {number of vlan}. If Cisco is configured to accept and send the marked packets and has an IP address in the subnet of VLAN 20, it should be able to communicate with other devices in VLAN 20.

• Driver files that run the parallel port and USB port

  In the system information utility where to look to find the parallel port and the port driver USB, name of file that manages these?

  Know the drivers specific, is only half the story.  Why you looking for these drivers?  You have problems with your parallel port or USB port?  This can be caused by problems with drivers or it could be a hardware problem (hard to diagnose a hardware problem without good parts to swap and test).  If you need to update the drivers, you must use device (not msinfo32) Manager - or maybe clicking on an executable file that loads the drivers automatically (depends on how it is sent by download).

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need drivers (I assume that you want to the parallel port and USB ports), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  Or run the Setup program of driver provided by the vendor of the computer or the manufacturer of the device.  Be VERY careful get Vista compatible drivers for these devices are difficult to identify (they usually come with the numbers of model or something like that if they can have serial numbers) and using the wrong drivers could make the problem (whatever that is) worse.

  If you update the drivers succerssfully and the problem persists, then it is probably a hardware problem.  In this case, contact the manufacturer of your computer for technical support (hopeully it is still under warranty) or bring it to a professional computer repairman (NOT Geek Squad or one of those big store centers because they don't really know what they're doing and charge a lot for this level of expertise) to have the components tested and possibly replaced.

  I hlpe that aid.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• Windows 7 64 - bit open TCP and UDP ports

  Well im clearly online but when I open original (battlefield 3) that it says im offline, so I spoke with the original technology and they gave me 2 hours of bs to do and then he said that I had to open the ports and they sent me a link for 32 bit windows (https://help.ea.com/article/opening-tcp-or-udp-ports-for-connection-issues.) I told them I did not 'my network places' and they didn't know why... I told them it was 64-bit another 5 - 6 times and they kept on trying to make me do the 32-bit installation. idk why. but in any case, I searched google and could not find an answer that is not covered in random bs or my 64-bit windows did not have this which is suppose to be on the list.

  Step 3 is not there? I got a list or change the settings of the licensed features... He didn't add the port!

  for example

  Method 2: Configure your system to allow access to the game servers. The firewall or the router must allow unrestricted communication on TCP and UDP Port number 3724. World of Warcraft (WoW) game client uses TCP whereas Voice Chat features use UDP. To open a port in Windows Firewall:

  1. open the Windows Firewall by clicking Start , clicking Control Panel, clicking Security, and then clicking on Windows Firewall.

  2. click allow a program through Windows Firewall.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on the port of Add. {THIS ISN'T ON MY PC}
  

  4. in the name box, type a name that will help you remember what the port is used.

  5. in the Port number box, type the port number IE 3724

  6. click on TCP or UDP, depending on the Protocol.

  7. to change the scope of the port, click Change scope, and then click the option that you want to use. ("Scope" refers to the set of computers that can use this port opening).

  So im hoping you guys can link me to a up to this way to change the ports that will be on my windows 7 64 bit

  Hi Fostard,

  If I understand well you face any problem with not able to connect to the internet.

  I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  You can go through the steps from the link and check if it helps.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help you.

• series PCI and ocy port driver easy serial port can not get driver Windows 7 Professional

  series PCI and ocy port driver easy serial port can not get driver Windows 7 Professional

  Hi Louis,.

  What is the brand and model of your computer?

  You can visit the computer manufacturer and try to install the latest version of the Chipset drivers.

  Also try to use Windows Update to update the drivers and check if it helps.

  Automatically get recommended drivers and updates for your hardware

  You can also get in contact with the support of computer manufacturer for assistance.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• How to add a VLAN on a trunk port and channal port

  Hi all

  I need to set up a configuration details below.

  1 how to add several VLANs on Cisco 4500 switch trunk port. (vlan existing also will be there)

  2. I have also 2 4500 switch to shared resources and channel ports.

  So my question is should I add new VLANs on the trunk port and port also channel?

  Looking for an answer

  It depends on your existing configuration.  If you have not specified WHAT VLAN is allowed, they would be by default.  If this isn't the case, you need to add the VLAN again to the definition of trunk.

  Too far again go to that VLAN, that also depends.  IF you have VTP really set up, you have to create the new vlan on one of the master switches in VTP (probably your 4500) and the definition spread to other switches.   If this isn't the case, then you declare new VLANs on each switch that would need them.

• Usb and Ethernet port does not work after update of windows 8.

  Hello

  I have a new HP laptop, and two days later the window updates automatically and my USB and Ethernet port stopped working. I returned it and got a new laptop and it is same thing. every couple of days that he update and refresh back to the old settings without losing my documents. I can't keep install my apps every two days after the update. Please let me know what I can do to update without having this same problem. If there is anything I can do so I have to return the laptop.

  Ben.

  Hi Ben,

  You can install the Windows updates manually by changing the settings of Windows updates.

  1. Open Windows Update in Control Panel by dragging it from the right edge of the screen, typeSearch (or, if you are using a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clickingSearch), get into Windows Update in the search box, by typing or clicking onsettings and then type or by clicking install optional updates.

  2. In the left pane, tap or click change settings.

  3. Under important updates, click the following option:

     Download updates but let me choose whether to install them.

  4. Under recommended updates, select the give me updates in the same way I receive important updates recommended , and then click OK.

  Manually install the Windows updates and find the problem causing the update.

  I hope this helps.