Blocking of the internal services of VPN and Proxy
Hello
I have some users with Windows 7 and MAC laptops inside my network domestic who is protected by the R7000.
I'd like know if its possible to block sessions VPN and Proxy, initiated from these internal, to communicate with Internet computers.
Thank you
Try VPN Service to block.
Tags: Netgear
Similar Questions
-
Activate the SMTP Services in VPN
Hello
I have configure ASA to remote VPN users access the Server internal Exchange and synchronization with the e-mail system. And they should be able to access the servers LAN via VPN. Previously, we did set up two servers (10.10.10.170 and 10.10.10.112) for various services. Now, we set up for the remote user VPN access our server Exchange (10.10.10.8), also they can ping. I set it up without SMTP and they can ping each other and when I configured with SMTP they cannot ping also another site also unable to ping. I scored my new Setup with underline color. Any help would be much appreciated. Please have a look my configuration setting.
Thank you
Topher
Why you put just let the ACL
inside_nat0_outbound list extended access allowed host ip 10.10.10.8 192.168.100.0 255.255.255.0 (newly added this IP Exchange he ping between them)
With this quality of 10.10.10.8 to 192.168.100.0 ACL will NOT be translated. This includes all THE IP (ICMP TCP UDP... etc) with the second line of 10.10.10.8 traffic ONLY 192.168.100.0 on port 25 will be process by not NAT.
The ACL are wrong for several reasons. First of all the Destination port is not 25... It would be the source port if I would like
allow the host 10.10.10.8 eq smtp 192.168.100.0 255.255.255.0
and is NOT
permit tcp host 10.10.10.8 192.168.100.0 255.255.255.0 eq smtp
Go aheah and work with ACL... ip host 10.10.10.8 .permit 192.168.100.0 255.255.255.0
Is this a problem?
-
Need help to access the internal network via VPN on ASA5505 8.4 (1)
Recently, I upgraded my ASA5055 from 8.02 to 8.4 and since I have updated to the new version I can access my home network is no longer through the VPN. I can connect to the VPN with no problems however I can no longer ping or you connect to my network of 10.0. Someone would be kind enough to look at my config and tell me what needs to be added to make it work? In my old config, I had a statement of NAT for VPN that is no longer here.
I also wanted to configure WebVPN to work as well, and this is something that I've never been able to understand. Is it also possible that I can be on my 20.0 network and connect to the VPN and access 10.0 as well? When it is connected to my network of 20.0 I'm not received credentials to connect to the VPN. I would be grateful if someone can help out me. The major part of this is the first part of this question.
My configuration:
ASA Version 8.4 (1)
!
ASA5505 hostname
domain xxxxxxxx.dyndns.org
enable encrypted password xxxxxxxxxxxx
xxxxxxxxxxxxxxx encrypted passwd
names of
nameserver 192.168.10.2
Office of name 192.168.10.3
name Canon 192.168.10.5
name 192.168.10.6 mvix
name 192.168.10.7 xbox
name 192.168.10.8 dvr
name 192.168.10.9 bluray
name 192.168.10.10 lcd
name 192.168.10.11 mp620
name 192.168.10.12 kayla
name 192.168.1.1 asa5505
name 192.168.1.2 ap1
name 192.168.10.4 mvix2
name 192.168.10.13 lcd2
name 192.168.10.14 dvr2
!
interface Vlan1
nameif management
security-level 100
IP address asa5505 255.255.255.248
management only
!
interface Vlan2
0050.8db6.8287 Mac address
nameif outside
security-level 0
IP address dhcp setroute
!
interface Vlan10
nameif private
security-level 100
IP 192.168.10.1 255.255.255.224
!
interface Vlan20
nameif Public
security-level 100
IP 192.168.20.1 255.255.255.224
!
interface Ethernet0/0
Description pointing to WAN
switchport access vlan 2
!
interface Ethernet0/1
Uplink port Linksys 12 description
switchport access vlan 10
!
interface Ethernet0/2
Description Server 192.168.10.2/27
switchport access vlan 10
!
interface Ethernet0/3
Uplink Eth1 management description
!
interface Ethernet0/4
switchport access vlan 30
!
interface Ethernet0/5
switchport access vlan 30
!
interface Ethernet0/6
switchport access vlan 30
!
interface Ethernet0/7
Description of Cisco 1200 Access Point
switchport trunk allowed vlan 1,10,20
switchport trunk vlan 1 native
switchport mode trunk
!
Banner motd users only, all others must disconnect now!
boot system Disk0: / asa841 - k8.bin
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS server-group DefaultDNS
domain xxxxxxx.dyndns.org
network object obj - 192.168.50.0
192.168.50.0 subnet 255.255.255.0
Server network objects
host 192.168.10.2
network object obj - 192.168.10.0
192.168.10.0 subnet 255.255.255.224
network object obj - 192.168.20.0
subnet 192.168.20.0 255.255.255.224
network server-01 object
host 192.168.10.2
network server-02 object
host 192.168.10.2
xbox network object
Home 192.168.10.7
xbox-01 network object
Home 192.168.10.7
xbox-02 network object
Home 192.168.10.7
xbox-03 network object
Home 192.168.10.7
xbox-04 network object
Home 192.168.10.7
network server-03 object
host 192.168.10.2
network server-04 object
host 192.168.10.2
network server-05 object
host 192.168.10.2
Desktop Network object
host 192.168.10.3
kayla network object
Home 192.168.10.12
Home_VPN_splitTunnelAcl list standard access allowed 192.168.10.0 255.255.255.224
outside_access_in list extended access permit tcp any any eq 3389
outside_access_in list extended access permit tcp any any eq 2325
outside_access_in list extended access permit tcp any eq ftp server object
outside_access_in list extended access permit tcp any any eq 5851
outside_access_in list extended access udp allowed any any eq 5850
outside_access_in list extended access permit tcp any any eq pptp
outside_access_in list extended access udp allowed any any eq syslog
outside_access_in list extended access udp allowed any any eq 88
outside_access_in list extended access udp allowed any any eq 3074
outside_access_in list extended access permit tcp any any eq 3074
outside_access_in list extended access permit tcp any any eq field
outside_access_in list extended access udp allowed any any eq field
outside_access_in list extended access permitted tcp everything any https eq
outside_access_in list extended access permit tcp any eq ssh server object
outside_access_in list extended access permit tcp any any eq 2322
outside_access_in list extended access permit tcp any any eq 5900
outside_access_in list extended access permit icmp any any echo response
outside_access_in list extended access permit icmp any any source-quench
outside_access_in list extended access allow all unreachable icmp
outside_access_in list extended access permit icmp any one time exceed
outside_access_in list extended access udp allowed any any eq 5852
KaileY_splitTunnelAcl list standard access allowed 192.168.10.0 255.255.255.224
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer of 36000
logging warnings put in buffered memory
recording of debug trap
asdm of logging of information
address record [email protected] / * /
exploitation forest-address recipient [email protected] / * / level of errors
Management Server host forest
MTU 1500 management
Outside 1500 MTU
MTU 1500 private
MTU 1500 Public
local pool IPPOOL 192.168.50.2 - 192.168.50.10 255.255.255.0 IP mask
local pool VPN_POOL 192.168.100.2 - 192.168.100.10 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow all outside
ASDM image disk0: / asdm - 641.bin
don't allow no asdm history
ARP timeout 14400
!
Server network objects
NAT (private, foreign) static tcp ftp 5851 service interface
network object obj - 192.168.10.0
NAT (private, foreign) dynamic interface
network object obj - 192.168.20.0
NAT (outside) dynamic public interface
network server-01 object
NAT (private, outside) interface static 2325 2325 tcp service
network server-02 object
NAT (private, outside) interface static udp syslog syslog service
xbox network object
NAT (private, outside) interface static service udp 88 88
xbox-01 network object
NAT (private, outside) interface static service udp 3074-3074
xbox-02 network object
NAT (private, outside) interface static service tcp 3074-3074
xbox-03 network object
NAT (private, outside) interface static tcp domain domain service
xbox-04 network object
field of the udp NAT (private, foreign) of the static interface function
network server-03 object
NAT (private, outside) interface static tcp https https service
network server-04 object
Static NAT (private, outside) interface service tcp ssh 2322
network server-05 object
NAT (private, outside) interface static 5900 5900 tcp service
Desktop Network object
NAT (private, outside) interface static service tcp 3389 3389
kayla network object
NAT (private, outside) interface static service udp 5852 5852
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
Enable http server
http 192.168.1.0 255.255.255.248 management
redirect http outside 80
location of SNMP server on the Office floor
SNMP Server contact [email protected] / * /
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
No vpn sysopt connection permit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto-map dynamic outside_dyn_map pfs set 20 Group1
Crypto-map dynamic outside_dyn_map 20 set transform-set ESP-3DES-SHA ikev1
life together - the association of security crypto dynamic-map outside_dyn_map 20 28800 seconds
Crypto-map dynamic outside_dyn_map 20 kilobytes of life together - the association of safety 4608000
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 192.168.1.0 255.255.255.248 management
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 30
Console timeout 30
access to administration management
dhcpd dns 24.205.1.14 66.215.64.14
dhcpd ping_timeout 750
dhcpd field xxxxxxxx.dyndns.org
dhcpd outside auto_config
!
dhcpd manage 192.168.1.4 - 192.168.1.5
dhcpd enable management
!
dhcpd address private 192.168.10.20 - 192.168.10.30
enable private dhcpd
!
dhcpd 192.168.20.2 public address - 192.168.20.30
dhcpd enable Public
!
a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Server NTP 192.43.244.18
Server NTP 129.6.15.28
WebVPN
internal Home_VPN group strategy
attributes of Group Policy Home_VPN
value of 8.8.8.8 DNS Server 4.2.2.2
Ikev1 VPN-tunnel-Protocol without ssl-client
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Home_VPN_splitTunnelAcl
value by default-field www.xxxxxx.com
the address value IPPOOL pools
WebVPN
the value of the URL - list ClientlessBookmark
political group internal kikou
group attributes political kikou
value of 8.8.8.8 DNS Server 4.2.2.2
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list KaileY_splitTunnelAcl
XXXXXXX.dyndns.org value by default-field
username scottrog encrypted password privilege 0 xxxxxxxxxxxxxx
user_name john encrypted password privilege 0 xxxxxxxxxxxxxxx
username joek encrypted password privilege 0 xxxxxxxxxxxx
eostrike encrypted xxxxxxxxxxxx privilege 15 password username
username almostsi encrypted password privilege 0 xxxxxxxxxxxxxx
username ezdelarosa password xxxxxxxxxxxxxxencrypted privilege 0
type tunnel-group Home_VPN remote access
attributes global-tunnel-group Home_VPN
IPPOOL address pool
LOCAL authority-server-group
authorization-server-group (outside LOCAL)
Group Policy - by default-Home_VPN
authorization required
IPSec-attributes tunnel-group Home_VPN
IKEv1 pre-shared-key *.
type tunnel-group SSLClientProfile remote access
tunnel-group SSLClientProfile webvpn-attributes
enable SSLVPNClient group-alias
tunnel-group type ClientLESS remote access
tunnel-group kanazoé type remote access
attributes global-tunnel-group kanazoé
address VPN_POOL pool
by default-group-policy kikou
tunnel-group KaileY ipsec-attributes
IKEv1 pre-shared-key *.
by default-group Home_VPN tunnel-Group-map
!
!
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:438ed6084bb3dc956574b1ce83f52b86
: end
ASA5505 #.
Here are the declarations of NAT for your first question:
network object obj - 192.168.100.0
255.255.255.0 subnet 192.168.100.0
NAT (private, foreign) source static obj - 192.168.10.0 obj - 192.168.10.0 destination static obj - 192.168.50.0 obj - 192.168.50.0
NAT (private, foreign) source static obj - 192.168.10.0 obj - 192.168.10.0 destination static obj - 192.168.100.0 obj - 192.168.100.0
And 'clear xlate' after the above and that should fix your first question.
I would check your second question and get back to you shortly.
-
OK, so I need DirectX 0.9 c to the game red alert 3, but I can't on the new directx installed on my computer because of this error
A .cab file needed for installation is not reliable. Please check Cryptographic Services are enabled and the certificate file is valid.have you tried solutions on how to solve this problem posted by mods on the previous posts with a similar problem, but it does not work for me
help is appreciated, thanks
Game of automatic encryption Services Cryptography on AutoServices and then try again to install the program. To set the cryptographic on AutoServices, follow these steps:
- Start the Administrative Tools utility in control Panel.
- Double-click Services.
- Click Cryptographic Services, and then click Properties.
- Click Automatic for Startup type, and then click Start.
Reference: http://support.microsoft.com/kb/822798/ and follow all practices listed in the article.
Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they could be.
-
Original title: error NET HELPMSG 3521 while checking the Update Service was stopped.
Windows Vista. 32-bit, SP1 and 2
Long story short, I tried to fix my problem of update windows since the beginning of July 2011. My computer does not stop when you install updates automatically or manually. I got a 8024000 error. A shot an email to Ms support and I received an email quickly with some procedures to do. I don't have to make these 4 days later. Here is the part of the email.
This problem may be caused by the following factors:
1. the Windows Update service has stopped.
2 corrupt Windows Update temporary files.
3. bad Internet connection settings.
4 corrupted DLL files.
Step 1: Check the services concerned of the update of Windows
1. click on the button 'Start' in the 'Search' bar type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
2. double-click on the service "Windows Update".
3. click on the 'general' tab. Make sure the "Startup Type" is "Automatic" or "manual". Then please click the button "Start" under "Status of Service" to start the service.
4. repeat the above steps with the Background Intelligent Transfer Service (BITS).
I completed this step.
Step 2: Rename the folder C:\Windows\SoftwareDistribution Windows Update
1. close all open windows.
2. click on the "Start" button, click "All programs" and click on "Accessories".
3. right click on "Command prompt" and click "run as Administrator".
4. in the window "Administrator: command prompt", type "net stop WuAuServ" (without the quotes) and press ENTER.
Make sure it is said that he has been arrested with success. OK, it worked.
5. click on the button 'Start' in the 'Search' box type "%windir%" (without the quotes) and press ENTER.
6. in the opened folder, find the folder named "C:\Windows\SoftwareDistribution".
7. right click on the folder, select Rename, and type "SDold" (without the quotes) to rename this folder.
8. while still in the window "Administrator: command prompt", type the command "net start WuAuServ" (without the quotes) in the window to restart the service Windows updates
It did not work. I received a message...
The syntax of the command is
NET [accounts: computer: config: continue: file: Group: help: helpmsg: localgroup: pause: print: session: share: start: statistics: stop: time: use: user: view]
C:\Windows\System32>_
I tried again from the beginning and now get the following error: NET HELPMSG 3521
"MS supports has not returned my emails to the technology or the Manager.
Can someone help me? Please notify. Suzzz-Q
There are many other measures that followed the foregoing. If anyone is interested in reading all of this...
Step 3: Component of Windows Update registry
============================
1. click on the "Start" button, click "All programs" and click on "Accessories".
2. right click on "Command prompt" and click "run as Administrator". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
3. Enter the following command and press ENTER.
REGSVR32 WUAUENG. DLL
You will get a window "DllRegisterServer in successful c:\windows\system32\wuaueng.dll.
4. then please proceed to enter the following commands one by one. A success notification is received after each command.
REGSVR32 WUAPI. DLL
REGSVR32 ATL. DLL
REGSVR32 WUCLTUX. DLL
REGSVR32 STINKS. DLL
REGSVR32 WUPS2. DLL
REGSVR32 WUWEBV. DLL
If please test the issue again and let me know the result. If the problem persists, I'll help you check your Internet connection in our next communication. To clarify the issue and provide more specific troubleshooting steps, please help me to collect the following information.
How to capture a screenshot
======================
1. press the button print screen (print screen) on your keyboard.
2. click on the "Start" button, type "mspaint" in the search bar and press ENTER.
3. in the Paint program, click on the "Edit" menu, click "Paste". Click on the "File" menu, and then click "Save".
4. the dialog box "Save as" appears. Type a file name in the "filename:" box, for example: "screenshot".
5. make sure that "JPEG (*.)" JPG; *. JPEG; *. JPE; *. JFIF)"is selected in the box"Save as type", click on"Desktop"in the left pane and then click on"Save ".
Please send this JPEG file to my e-mail account to * address email is removed from the privacy *.
How to retrieve system information
=============================
System information can provide us with more information about the current state of the system. I would check for you. Please send it to me using the following steps:
1. click on the "Start" button, type "MSINFO32" in the search bar and press ENTER to start System Information.
2. on the pop-up window, in the menu bar, click on 'File' and click on 'Save', type a file name and choose NFO as "Save as type", click on "Desktop" in the left pane and click Save.
Please send it as an attachment to * address email is removed from the privacy *. If the file is too large to be sent, please right-click on the exported file, choose "send to"-> "Compressed file (zipped)" and then send the zip file for * address email is removed from the privacy * for further research.
How to recover the WindowsUpdate.log file
================================
1. click on the "Start" button, type "WindowsUpdate.log" (without the quotes) in the search bar and press ENTER. We will see a file named "WindowsUpdate.log".
2. now click on the 'File' menu and click on the "save under".
3. in the left pane, click "Desktop" and click the "Save" button.
Hello
Instead of all of the previous steps, you can just try the steps as shown in these methods and check if these help.
Method 1:
To resolve the error 8024000 follow the steps in the link and check if it helps.
Windows Update error 8024000
http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-8024000B
Method 2:
See also article on the resolution of the problems with the installation of updates and check if this may help:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
Corruption, massive in almost all of the network services user account and firewall Windows
Win 7 Pro SP 1. An account with administrator privileges. Domestic wireless access to a router; D-link devices. System was working fine until about seven 2 (and I pointed out some Windows updates installed September 1, but don't think it's relevant). Computer users allege no unusual behavior on their part Analyses of viruses from Windows Defender and Avast free were clear. Restoring from a previous restore point (two different ones) has not solved the problem - the restore points were date known system OK. Corruption has been maintained despite the restorations (worked and failed).
A complaint that has lost network access. On the survey, found that all these symptoms mentioned below, and no doubt other symptoms exist that I am not aware of. The solution was to create a new user account, and which restored massive configuration problems.
Symptoms:
1 Windows Firewall could not turn on. Yes, I looked at the KBs regarding this issue (basic dependencies does not and so on) and tried individual hotfixes from the KB, without success.
2. in the network sharing Center, there was no display of the usual icons at the top of this window. Those who show the personal computer connected to the router connected to the internet. Error message displayed re no dependence of base.
3. it is possible to send signals between the USB wireless device on the computer and the wireless router. In the task area, the Windows message was 'limited connectivity', something like that. It was possible to connect and disconnect using this facility. But no internet access, notes.
4. the resolution of the problems would not be executed. The message was that political diagnostics are not running. All attempts to start this service (with its two assistance services) has failed. Tried the individual patches of the relevant KB (wearing mostly on change permissions in the registry at some points), which failed.
5. in addition, the Dhcp client service would not be executed. Once again, among the KBs tried the proposed fix on the permissions change, which failed. (Omitted in the sense that I could not always start the service; editing the registry was fine).
5. firewall KB contained a file "beats" that you can create and run, I did, and another had similar commands (start and stop some services) that could be run in a command window. Both failed on some services - especially Mspsvc (Microsoft protection Service) - Although the success was shown to other services.
6. when I created a new user profile, I re-entered the registry permissions in some of these places just to see what was different. In the damaged user profile, what was missing, it was the standard system of services (about 3 or 4 of them; things like the name of Dhcp). What showed was the News user account (for the specific user account; administrator; and two more points).
Telling me that something has released a complete subsystem or three. Never seen this behaviour before.
Would be nice to have an idea where to look for a fix / restore procedure.
DonM
Hello
Thank you for providing us with brief information on the specific issue that you are facing the computer.
I would like to know, have you been able to access the network on the new user profile?
As you have tried several steps including the change of permission for the registry value and run the batch file, I would ask to perform Scan SFC.
System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.
For more information on how to scan SFC, please see the Microsoft Support Article below.
Use the System File Checker tool to repair missing or corrupted system files
Let us know the results of the SFC Scan, so that we can help you further.
-
EnglishHello someone can help me when I connect (Windows 8), takes a long throw, and when I see the programs running in the Task Manager windows observed that "Antimalware Service Executable" defender service, is running and consumes me all my resources machine and CPU 70% 90 MB, the antivirus memory starts and says that it takes security measures would have found viruses I turn to the history of the antivirus and trays of items found, quarantined, are allowed to empty and clean and take measures such as ccleaner, defragment disks and a comprehensive review of the antivirus (I do not detect anything).Thank you for all the help you can give me. Thank youEspañol
Hola alguien me can help cuando inicio sesion (Windows 8), to demora mucho iniciar y cuando veo los programas ejecutandoce in el administrator of tasks seen as 'Antimalware Service Executable"el servicio windows defender, is esta ejecutando y me esta consumiendo todoslos mi Máquina 70% CPU resources y Memoria 90 MB, el antivirus is starts there as esta seguridad por supposedly measures taking a virus found , I've al Historia del antivirus las bandejas Elementos en cuarentena, found there, allowed to encuentran vacias, is volume measures of limpieza como el ccleaner, discos desframentacion y UN completo del antivirus review (not me detecto nada).
The agradesco toda the colaboracion that I can offer. GraciasI'm not a fan of programs like Ccleaner, if they are used in an aggressive manner, they can corrupt a Windows system and cause all sorts of problems.
How the machine does not start mode safe?
How to start Windows 8 in Mode safe
http://www.bleepingcomputer.com/tutorials/start-Windows-8-in-safe-mode/See if you can isolate any cause of your problems.
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/default.aspx/KB/929135I see a lot of recommendations here for programs such as -
Malwarebytes' Anti-Malware
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntispyware
http://SUPERAntiSpyware.com/If you see that Windows Defender is the problem, because it is integrated with Windows 8, you can try to fix it through the System File Checker tool, or by using the system back restore before any problem. You can also disable and get another free Anti Virus scan.
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (7 or 8).
http://support.Microsoft.com/kb/936212/#appliesToHow to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
http://support.Microsoft.com/kb/928228#appliesToYou can try other things are.
Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking / control. He will tell you immediately if there are any problems with your hard drive. If she says there are errors then run the scan and let chkdsk to correct them.
Test with another Windows user in case the current user profile is damaged.
-
Cannot access the internal resources for VPN site-to-site
We have two ASA. We set up just VPN site-to-site. For some reason, we are not able to access internal resources at the main office of the remote office. Do you have any suggestions? Thank you.
as wu suggested, please first confirm that the tunnel is mounted correctly
"sh cry isa his '-> will tell u if the phase 1 is in place
"sh cry ips its '-> say if phase 2 is in place
now once they r upward, when you ping from site to site b
program in the site, you should see one and decaps site b for traffic from a to b and vice versa for return transportation
Now we have to see where it is a failure
could be tht package is coming up to the asa but not getting is not encrypted or that the package does not come to the asa itself
You can run tracer package to see if it's getting wrapped, or in other words hits vpn tunnel
It might be a nat problem, and sometimes if it is a new configuration probably ISP may have blocked the esp traffic in one direction or in the other direction
the best approach, that it is turn on "management of access to the inside" on the firewall and make a ping of source of asa
inside ping
-
How to increase the speed of work and avoid the "Server timeouts" with VPN and?
Hello!
I am faced with slow work and delays in Thunderbird to my Linux.
I have 4 accounts (3 are connected via IMAP) and two of them runs very slowly. Fear that every time I see annoying message at end of the period of the server and each message (same old) opens very slowly and sometimes doesn't open.
It maybe the problem in services postal themselves, or illustrated by the 4th account is Exchange (which work much faster in fact), but I need to manage that somehow. I think I had a fast enough internet connection.
I know that the server timeout could be increased, but I have not found this option in the settings. I have 31 TB, and all the settings, I found in Google seems to be linked to the old version with the old interfaces. I went to advanced settings, I'm not sure that it's settings and what value it must contain.
In addition, has something like 'caching 'mail TB? I mean, during the reception of the new letter - it is "cached" locally, so when I try to read - local version is used until "cache" is cleaned. But when I delete or move the letter to another folder - happening also at the level of the server. I think that if TB could sync all mails and store their values locally this will work much faster.
Thanks for any possible solution to this.
It seems to me that I found the root cause of the problem)
Problem is not in TB, but in these 2 mail services itself. They work poorly when vpn works.
Will address this issue for messaging services.
-
In my view, it is important to block insecure addons. But if you do it should be an open bug assigened. The bug referenced to this add-on is already resolved, so I do not know why this plugin is disabled. https://Bugzilla.Mozilla.org/show_bug.cgi?id=636633
I have the problem that I want to use Secure_Auth that uses the Deployment Kit Java of nasty (via javascript) way that firefox does not see the deployment kit must be started. This is why I have not expected this plugin still for this web site. Since there is no available documentation how to do this configuration in a config file that I'm stuck at the moment.
I'm a little surprised liitle which blocks all versions (same secure versions) is a way to get a good user experience.
Concerning
Martin
MG_DAU,
Why do you think that the problem is caused by the block of Java Deployment Toolkit, not Java itself? See http://www.java.com/en/download/faq/deployment_toolkit.xml and this document I found with a google search:
For general information on the use of Java on trusted sites, see:
-
WRT160N v2 site blocking to the router even after reset and upgrade firmware
For some reason any my WRT160N v2 router blocks access to the following Web site: www.cngoons.com
I can connect on the site if I connect to the modem directly, or using the connection to the internet of someone else. However computers that connect through the router is unable to access the site via a web browser (IE, FF or Chrome), cannot ping the site, and a tracert also fails.
I have reset the router by default, but the site is still blocked. I've upgraded to the latest firmware (WRT160Nv2_v2.0.03.009_US_code.bin) and the problem persists.
Any ideas on what's going on?
And after a search even more, I found this old thread dealing with the same question:
http://homecommunity.Cisco.com/T5/wireless-routers/Linksys-router-blocked-website/TD-p/12917
A solution is given at the end to change the MAC address of the router (I cloned MAC address of my PC), and then restart the cable modem. It worked for me!
-
I know that this computer is old, but I WANT TO IS to surf a few sites on the web, download all the photos from my camera or e-mails and play Solitaire. I cleaned up the list of the system tools disk. I thought that if I removed some programs, but I don't know which ones is sure to be deleted because I don't know what most of them are. He got so slow or just freezes and won't do anything and I feel frustrated! My internet connection is dsl ATT if THAT QUESTION.
Please CAN someone HELP me GET THIS THING USABLE AGAIN?
PLEASE OH PLEASE OHHi 1bitn2shy,
Add suggestions that you are provided, this could be of help too.
-
Still not get quick change or log in screen which has all of the names to open a session
Hello
So in this case I recommend you to uninstall the complete NetWare using a 3rd party UN-install commercially available
For example http://www.revouninstaller.com/index.html
There are also many other software that I don't remember not and are available free on the internet for UN-install/remove left on entries of an application.
Saurabh yapi | E-mail address is removed from the privacy *.
-
MOST OF MY SETTINGS IS "LOCKED". DO NOT KNOW WHY. HOW CAN I REMOVE THE LOCKS TO ZERO HOUR, DATE, ETC?
Locking the settings would be monitored through the EWS (built-in web server) to the printer. The lockout is really designed for printers Officejet to prevent others to perform printer changes that could affect the behavior of the printer. For example, to keep the date and time the Fax value see him exactly receive time.
Get the IP address of the printer by pressing the network icon at the top of the screen.
Enter this IP address into the address bar of a web browser on a computer. Printer status page should load. If you receive warnings of certificate, choose the option that allows you to continue anyway.
Click settings and then go into settings of the administrator on the left. Many of the features of the façade are ordered here. Make sure everything is checked except control lock. Once it is defined, click on apply.
Power off the printer for at least 1 minute and power then turn it on again to force the new setting to take effect.
You can also try to set the date and time under preferences on the left of the settings page, but it seems that the problem of locking is more widespread than the date and the hour.
The Admin settings page should look like this screenshot when it is set up the way it should be.
-
installation of direct x
Whence this installation of DirectX?
If that doesn't work either it's the Fix-It tool, that Microsoft provides cryptographic services
Maybe you are looking for
-
Can I put my music from my phone on my computer?
Hi, my hard drive broke so I had to buy a new one, so I won't have my music, only on my iPod. I was able to sync my iPod with my computer with the empty iTunes library with the new hard drive to put all my music on my iPod to my computer? Or what I n
-
Can NB100 - I delete some software preinstalled, I can't use?
Hello world! This is my first post. I just bought a Netbook Toshiba NB100-12 and I found in Add & Remove software programs for the readers of CD such as Toshiba direct writer drive, Toshiba and a Toshiba DVD player disc creator. Now that this Netbook
-
Vista on Satellite L300D-10 a - Graphics card reset after renstallation
This is my story.A few weeks ago my computer went down, so I decided to reinstall Vista (Home Premium). After I did, I noticed that many things had changed. For example, my screensaver no longer works, and some programs said that they needed to suppo
-
All pages that are analyzed (copies & probably faxes) have the same bright streak. Glass and other components are clean. This isn't a printing problem, self-test page is fine. Time for a new all-in-one printer?
-
Black screen HP Pavilion dv7-4060us
I have a HP Pavilion dv7-4060us is about 3-1/2 years. I have a black screen and it now won't start at all. He has also been more recent times of heating. I took it to a local repair guy and he said I need a new motherboard to a height of $200. It is