cc2015 gel while cutting in the timeline
I've just updated to CC2015 yesterday. I have a new project that I just started today and when I put the images in the timeline panel and try and adjust the trim monitor that appears in the monitor program, as expected, but their first locks upward. It will allow me to save the project while it is frozen and then I have to close and restart. This happened everytime I try.
My pictures is AVCHD 1080 60 p for a Panasonic AG160
My sequence defining the AVCHD 1080 P 60 is preset
My computer is
I7
16 GB OF RAM
GTX 670
Video player 2 TB
2 TB render drive
250 GB SSD OS drive
I use only currently 200 GB of my video player 2 TB.
Worked and everything works fine before the update.
I submit a bug report too.
Thank you
Phil
Hi Phil,
In the timeline panel, click on the menu 'key' and uncheck 'preview Composite during 'Trim'. See if that improves your performance and let us know your results.
Tags: Premiere
Similar Questions
-
Hi, I had a previous version of PE and has managed to cut a clip in the timeline and stretch or squeeze it with the Timestretch tool. I don't see how this can be done with PE8, as even if you can stretch a full clip, it does not seem to be a cutting tool, in the timeline at least.
Rather than work around this problem by using the 2 copies of the same clip and edit them separately, someone can he advise to know if I'm missing something here.
Thank you, Andy
Now, I have not pre 8, therefore the scissors tool was moved, but you can always place the CTI (current time marker) where you want to create a Groove and press Ctrl + K to cut this Clip 'master' in sections. For another cut, simply move the CTI to where you want than to be repeat Ctrl + K. If you make two cuts, you end up with 3 "subclips" on the Timeline and can apply effects (not only of Time Stretch) to, say one in the middle.
Hope this helps and good luck,
Hunt
-
Dragging to the timeline transitions work in first 11 elements?
Hello
If you drag a transition in the timeline panel, between two clips, until you release the mouse button, you can place it on the left, centered or right of clips (the cursor looks like a kind of flag and changes according to the position between the clips).
Theoretically, this should be the same to change the alignment in the Transitions settings dialog box but it does not work for me, whenever I release the mouse button, selects between Clips alignment.
I read Adobe Premiere elements 11 classrooms in a book and Chapter 7 creating Transitions, it is said "in software testing used when writing this lesson, which you removed the transition did not affect the alignment shown in the Transition settings... dialog box.»
It seems that this feature has not been improved since first elements 11 has been tested.
Of , can someone tell me if this option works correctly, please?
Thank you
Marcos
I should be ready soon to publish my links to very detailed information on the transitions video and audio of Premiere Elements.
But the immediate report...
If I have two video clips cut on the timeline of 11 items first and I drag the video transition left curtain Clip, between the Clips, or right Clip, Transition adjustments pop-up will be displayed. I find no cases yet where I can stop to appear with the placement of the transition. And, in the circumstances described (2 cup clips), auto "align on" will be between the clips, and that alignment will not change when I click on adjustments of Transition Pop - Up.
This is in accordance with the instructions from Adobe who published what to expect for the alignment of the transition for the clips trimmed and uneducated.
If I wanted video Clip alignment Clip left or right, I would have to have chosen this option until I clicked over to the pop-up.
Do you see something very different than when you do the same thing with trimmed video clips and video transitions in items 11 first?
Thanks for the follow-up.
RTA
-
Make the inactive clip in the timeline
Hi people,
I googled cela widely enough, but impossible to find an answer... Please help if you can:
Can I do an inactive clip while keeping in the timeline?
I know that you can disable clips in FCP7 and FCPX... First probably has this option too?
I realize that by dropping the opacity of clips, it would have the same effect, but is not a fast or elegant solution.
Any ideas?
Thank you
Rob Symington
https://Vimeo.com/robsymington
OK, I need a slap.
I just spotted the checkbox 'Activate' when right-clicking on a clip.
I'm going to fight with birch twigs.
Toodle pip!
-
How can I unlock video 1 and Audio 1 on the Timeline (CS5)
I'm new to using prepro so please bear with me.
When I want to insert a video clip at the beginning of the video 1 on the Timeline, existing and audio clips are static, so the incoming clip will rest at the beginning (too much riding the other), but I would like to than the other elements to move to the right, including audio in Audio 1.
Help section of the House, I read how to unlock the timeline in part as follows, '... ". for example, if you want all clips to the right to change video 1 and Audio 1 to move to the right while leaving all the audio clips 2 in place, lock in sync on the video 1 and Audio 1.
I have to lock the 2 video and/or Audio 2 (that I have nothing there). Just need to to move to the right when I insert another clip.
Use CTRL while dragging to the timeline. That will insert instead of overlay and it is quite easy to see when you look at the icon.
-
Why is it possible of the ripple is not delete an entry and exit section of a track of the timeline, while that in the same area there is one cut on another way?
I posted a topic on it as well. Seems like if update the CC has allowed me to finally extract any section marked in and out of any track independently of any other person when sync lock is disabled. Very powerful (and very basic) tool!
-
Can cut is no longer clips of media to drag in the timeline of the movie
Once I have download media, and I create a movie in iMovie, I am no longer able to highlight the small clips of media uploaded to slide on the timeline of the movie. I did this for years with ease, but now when I upload media (let's say it's a 90 minute video), when I touch the clip it highlights the whole thing instead of letting me choose that it contains. Any help would be great!
Yes, there was a change in the last update to iMovie. The default is now to choose the full clip. To select a part of a clip in an event that you have pressed the 'r' key while you move the cursor over the area you want to select. An alternative is to position the cursor at the beginning of the selection and press 'i' and then place the cursor at the end of the selection and press 'o'.
Geoff.
-
Apple "final cut pro 7", high res Pro 422lt 1920 x 1080 (odd) clips, is this gradual?, no sequence definition 1080 progressive
How can I make sure that I have the best setting of the timeline for my clips. I did all the settings of Mount clips but there is no progressive setting for 1080 p. Images originally dslr Nikon that I used mpeg streamclip to convert to prores. Thanks for your help!
The frame for you size source of material is HDTV 1080i (16:9). That only sets the size of the image, not the domination of the field, it's what makes progressive or interlaced. The reason it's labels with the 'i' is that when FCP7 was abandoned by Apple, they have never updated the software in order to take account of 1080 p contents.
To make your progressive sequence, set the dominant field to None.
gerforce wrote:
Images originally dslr Nikon that I used mpeg streamclip to convert to prores.
In your screenshot of the properties of the element for your clip to the source, the material is interlaced. At the original camera file interlaced or progressive?
Also, the fps footage was actually 30 original and 29.97 not standard? 30 images/s is very limited its use.
MtD
-
I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) but not tif files? Very frustrating. Tried to install the new updates but my creative cloud is just a blank page?
Hello
I think you are referring to the white empty window of CC desktop application.
Please refer to the threads below where this issue has been addressed:
Creative cloud is empty window why?
New application Cloud Creative unusable: it is empty!
Re: Empty opening creative cloud app
Kind regards
Sheena
-
Clip markers have as their frame of reference of the timeline, they came. If you create a new brand of element in a new timeline, the marker in time is measured from his original script, not the new timeline where he is. Currently in CC 2015 organization there is no way to translate the clip marker references 'Local' in the 'World calendar"in which they now live. I captured on video a 8mm film that is chronologically jumble of short scenes. I placed the chronology of chapter for each scene markers, export the list of markers and finally understood the rearrangement of pieces of scenes he needed to put everything in chronological order. Thank God for the ability to export the list of markers, just as I needed! So the whole sequence has 85 chronological markers, dividing the sequence into 5 pieces and rearranging puts them all in chronological order. Obviously, I don't want to have to restore the scene boundries 85 times, I did as a necessary step to solve the puzzle. I think you might meet one day some of these problems:
1. the most obvious thing is located in the calendar for a piece, lift it and 'paste insert' where it belongs on the timeline. Problem: Lift or excerpt from don't lift or extract chronological markers with it, so when "Insert you a block", the piece inserted in the timeline has lost its bearings, they were left.
2. How about you make a sous-suite of the segment to move? Yes, it carries all the tracks, but not the chronological markers whence he came.
3. ok, I'll export the calendar together with chronological markers and reimport - ah, Yes, success, the chronology of the markers are now item, marks on the imported clip (the entire chronology). That's great, because the clip markers are sticky with the clip, I can it chop, rearrange to put markers in chronological order without returning any info title marker. Feeling beat with the reorganization completed five segments of the original timeline, everything is in order, nothing was reinstated, the timeline with its clip of chapter markers is ready to export to still make the DVD! Yes, you guessed it, element chapter marks are not exported in yet. The chronology of imports still with a marker, Chapter 1, at the beginning.
4. There must be a way, stacked the timeline with the time markers on it on the icon for "New"... ', it is the same as #3 above, but simpler. Historical markers are now the clip markers that don't export in yet.
From my experiences, it is therefore impossible to solve my problem without completely restoring scene boundries and type chapter titles. There are two repositories coordinated, clip) 1 local and 2) global chronology; and there is no way to go from one to the other 'mass'. There is the glove, I'm sure someone has a way to do this without returning the title of chapter 85 markers.
I have not found an automatic way to do this, but here is an efficient manual method that requires no titles of chapters Overtype.
Either drop your timeline that has mounted the icon "Create New" brands, or export the timeline and import it back. You now have a new timeline and markers are now on the video clip. Now, chop and reorganize this video clip, it is in the best new order, and the clip markers stick with the sections of the clamp. Now this procedure migrates the markers of the clips to the timeline (promotion):
Start at the beginning of the timeline, select the video clip. (The video clip must be selected for M to open the marker editing window)
1. type change M to find the first element brand, type M to open the editing window of clip marker, select the marker title and copy (control-C), hit Cancel
2 hit the icon of reference in the program monitor pane, which puts a green marker on the timeline at the same time as the brand of element,
3. double-click on the Green marker, paste the title of marker by control V, select the radio button of chapter markers, click OK.
Repeat steps 1-3 to promote all the markers of clip of historical markers with the same marker titles. Since we cut the timeline to reorganize, there are several video clips. As you progress, make sure that the clip that you are working on is selected, otherwise M will not open the editing window, instead, it will place a chronological marker. In short, follow this procedure exactly, it works. It's a stupid job, but it does the job with without having to retype marker titles. The chronology chapter titles now think time on the new timeline and they will export in yet. Hope someone finds it useful at some point in the future.
Perhaps team first see the usefulness of this and add a command 'Promote the clip for mounting marks markers' and "retrograde chronological markers for the clip markers" (conservation type, title and comments). It would be a powerful addition.
-
Hello
In Final Cut Pro 7, there is a way to have the tool bracket razor blade across ALL the tracks in the timeline (sequence) both. First, I see no way to do this. I'll have to cut each piece one at a time. What Miss me?
Hi Paul,.
Select the Razor tool, just hold down the SHIFT key and left click the mouse where you want to make a cut.
Vinay
-
audio clip WAV plays is not in Final Cut Pro (unless in the timeline)
I have a few audio dialog recorded externally on syncing with my videos. It is in format wav 24-bit / 48 kHz. The problem is the audio clips will not play participate in event viewer so that I can revisit. To be more precise, when I hit the space bar the cursor moves along the clip, audio level indicators move up and down as if it is being read, but I have no audio output. However, if I drop the audio clip in the timeline panel, press space - it plays perfectly!
Clues of what happens anyone?
Thank you.
10.2.3 FCPX
Try to convert the audio 16 bit @48 kHz .aiff.
The audio as it is, very probably turned in the Timeline to conform to the parameters of the project on the fly.
Al
-
Cannot paste, insert a clip to the timeline Source monitor in CC2015.3
Someone at - it a solution or a fix for this problem? I am currently using, to make a paste insert and am getting an error.
- The hotkey to make a paste insert does not work in the source Panel to place a clip on my calendar. I get a pop up Clip Fit I've ever seen before, all the boxes are shaded & the only option is the sequence ignore exit point. Then we glue the clip at the beginning of the timeline, regardless of where the playhead is.
It also States that the source is longer than the destination, regardless of trim (I & O) points I made in the source monitor. The source element is only 3 seconds with my points of toppings, so it makes no sense.
Is this another bug 2015.3? How can I fix this please. Would like to make a paste simple insertion of the source monitor
Check that you don't have to points together on the timeline, if the playhead is not parked at the point of in.
Timeline to points will take precedence.
MtD
-
First Pro CC (2015) gel on the trail of the timeline.
Hello! So I am currently doing a trial of Adobe Premier, and it seems to freeze everytime I try to drag something to the timeline (for example, an image from the file browser built-in). I have:
- Made sure I haven't installed from Pushbullet.
- Delete the file "Adobe" in documents and rebooted.
- Restarted my computer.
- Prime Minister uninstalled and reinstalled via Creative Cloud.
The only way to escape from this State ends the task through the Task Manager. This was not the case during the first hours that I worked with her, and then he started just sort of. I don't think I'm doing something different than what I was before. I'm on Windows 10.
Anyone encountered this before? Anyone has any advice on what I could try next?
Thank you for reading!
Edit: It is temporarily resolved by creating a new sequence and continuing from there - there is no freeze on the new sequence. I will update this if I meet again, but I guess it's okay for now.
Premiere Pro CC 2015 freezes when you drag a clip to the timeline
-
Hey there, having a very big problem important I need fixing with my first. I use the latest version of the creative cloud.
My PC Specs are:
Intel Core i7-4790 CPU @ 3.60 GHz
16 GB of ram
Running Windows 7 64 bit OS
My question is which occur randomly during editing sessions. Everything will work perfectly, and then import a new video in the project bin (or image sequence or audio, what has happened several times)
And I click on the video and drag it to the bottom in the timeline, the mouse pretty much freezes and wont let go of the clip. First is then suspended in a weird state of 'limbo '. I can still save the project and even export using shortcuts. But I can't click on anything whatsoever, or use any other action. The mouse is constantly in 'grabbing' mode. After the whole project is corrupted. I can solve the problem by opening a new project with a new sequence, then copy the clips... But it of very frustrating and massively takes time so please if anyone has a solution please let me know. Or whether it is actually just a big bug when creating last... This only started happening after the last update.
I will attach some screenshots to continue my view of what is happening.
Excuse Hypersnap logos, this is the only software screenshot that I could find which will appear at the mouse.
Thanks for your help.
Rich
Hey Kevin,
It seems fixed summer.
Thank you
Rich
Maybe you are looking for
-
Hello. I have G3 250 laptop HP with 4 GB of RAM, and I need to add a module more than 4 GB of RAM. How can I do?
-
Mr President.I have laptop model hp G60 230 us. The screen of my laptop is broken. It is not available on the market and to the hp service center. They said that "it is very old model laptop and so I can't help. I live in Patna, Bihar, India. so plea
-
Hi all I have a structure of the event, whose events are all s 'change of the value' of the buttons on the front panel (each of them did switch a light when you click on it). I need one of the events to run also in the case where a certain time elaps
-
NO RECOVERY on ITS Pavilion dv9720us
Hello, I have a laptop HP PAVILION Dv9720US Windows Vista 32-bit I have no sound on the recovery No changes have been made before and after the recovery. I tried to correct before the resumption, then resumed chose to be my best option. No audio, th
-
Keep automatic updates installation and restart request, cycling.
After a clean install of Windows XP Edition family, I was unable to install the automatic updates. Installed service pack 3 manually as suggested in this forum. But now he repeats to me there are updates to install, it downloads and installs, then