CD and serious DVD will not play.

Similar Questions

• I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop

  I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop

  I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop

  =================================
  If it is a recent issue, of what it may be worth trying
  do a restore of the system at a time before everything started.

  See the following article:

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

• I recently installed a DVD from ASUS drive, my DVD will not play on Windows media player plug-in but I bought the Corel DVD freeze and will not play.

  Windows XP DVD with Windows Media Player problem

  I have a Dell dimension3000 running Windows XP. I have an upgrade video card NVIDIA 8400 GS with memorey upgrade 2 g. I recently installed a DVD from ASUS drive, my DVD will not play on Windows media player plug-in but I bought the Corel DVD freeze and will not play. Is there a better plug-in or a solution to this problem?

  Try to download the utility "Windows XP video decoder check utility.

  It checks the ability of DVD to WMP encoder

• Envy23: CD and DVD will not play

  My CD/DVD will not play.

  CyberLink recognizes the drive, but displays the error message "No disk in drive" when inserted an ois.

  similar to windows media player. Have updated the BIOS but no luck have updated from Cyberlink. Can you please help. Very annoying.

  Hello @Brutus2 and @2edo,.

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your posts about how you're not able to get your computers to play the CD or the DVD into the optical drive, and I'd be happy to help you in this case!

  To fix this, I advise you to follow the steps described in this document on disk impossible reading disks (Windows 8). This will help you enable your computer to read and play CD and DVD media on the optical drive.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Why some DVDs will not play in my computer DVD player?

  I have a small collection of commercial DVD movies.  Most of them come from the place of the U.S. market, and some come from Asia... He play ALL these DVD in my Phillips DVD player that is connected to my TV.

  But only some of these DVD will play in my DVD player which is in my computer Dell Inspiron 531 with Windows 7 Ultimate edition.  This computer has a DVD/CD SAMSUNG HD161HJ SCSI disk drive.

  Some of the DVDs that will play on my computer are the American market, and some of them are of the Asian market, so I don't think that this has nothing to do with why some of these DVDs will not play on my computer.

  DVDs that play fine in my Phillips DVD on my TV player that will not play on my computer don't yet seem to close at play on my computer.  The DVD that will play on my computer liquidation (you can hear the noise) in the DVD player in 20 seconds and they start playing automatically in Windows Media Player... but I welcomed all others who won't have to sit in the DVD player for several minutes each in my tests and nothing happens... There is no wind sound and all nothing is happening on the computer screen.

  This doesn't seem to be a problem with the driver software for the disk hard because some of the DVDs will play.

  None of these DVDs are buckled and all of them are clean.

  I tried two or three times test each of DVDs that won't play, the removed from drive and put them back in.

  Does anyone have any suggestions?

  Thank you

  NuMetro

  Hi Dale,

  Although I never had no problem with the DVD or the CD I burned on PC, I think you're going to probably the same thing, that I've been with this internal DVD/CD player, is not a software problem, but just the characteristics of a lower quality DVD/CD player, and it isn't necessarily the symptoms of a dying man in car , but just a stock car low quality that some computer manufacturers cut corners with.
  The drive in the computer that I was referring in this thread is a DVD/CD SAMSUNG HD161HJ SCSI disk drive. Which may or may not be identical or similar to the reader, you have problems with, but the computer on which the reader is underway is a Dell Inspiron 531.
  Through the information that I've gathered on this thread and on another forum, I came to the conclusion that it's just a cheap player who gives intermittent performance recognizing various DVD, but as I said, the drive I troubleshooting always recognize DVDs and CDs that I burned in it... It was just the DVD movie that I have problems with.
  I dug my loyal reader DVD LaCie and plugged and I had no problems with him acknowledging and play ONE of my DVDs on this machine, which proves that the problem has nothing to do with the software system or DVD player software, as in the case suggested by someone else on this thread.
  Just buy yourself a Firewire drive or USB-2 DVD decent and you're probably fine.
  NuMetro

• DVD will not play on the standalone DVD player

  DVD NOT PLAYON STAND ALONE DVD PLAYER

  HELLO, I JUST USED WINDOW MAKER DVD, MY COMPUTER IS ONLY TWO MONTHS OLD.

  THE DVD WILL NOT PLAY ON MY DVD PLAYER WHICH IS PUGGED IN MY TV. HE PLAYS ON THE COMPUTER AND TELEVISION WHICH HAS A DVD BUILT IN IT.

  Thank you

  HELLO, I JUST USED WINDOW MAKER DVD, MY COMPUTER IS ONLY TWO MONTHS OLD.

  THE DVD WILL NOT PLAY ON MY DVD PLAYER WHICH IS PUGGED IN MY TV. HE PLAYS ON THE COMPUTER AND TELEVISION WHICH HAS A DVD BUILT IN IT.

  Thank you

  ==================================================
  If you use a DVD - RW disk... you could try a DVD-R, but some DVD players
  will not play a home made DVD... not much you can do about it.

  As an experience... you could try the following freeware to burn a video DVD
  recorded with your file to .wmv Movie Maker.

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://sourceforge.NET/projects/dvdflick/

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Pavilion Desktop PC p7-1414: DVD will not play video

  All of a sudden my DVD will not play on my computer.  DVD will play the data but not video.  Check Device Manager, which States that the device is functioning properly.  Insert other discs that have always played, but now they are not. Videos will play, however, on television.  No new hardware installed to cause a conflict. Checking for updates for the driver, but there are no new updates/drivers to install.

  Success... Thanks a lot for the downloads.  I currently have 8 CyberlinkPower2Go for burning, but the best new version I guess.  Maybe he would correct music hushed on broadcast television.  Thanks again... you saved a LOT of frustration!

• I have a Toshiba Satellite C655-S5305 application, running Windows 7. I made a few cds of music there are chandeliers and that they will not play on this computer. They do not play on my computer of husbands, good girls.

  I have a Toshiba Satellite C655-S5305 application, running Windows 7.  I made a few cds of music there are chandeliers and that they will not play on this computer.  They do not play on my computer of husbands, good girls.  I think that they are MP3.  My cd drive is appearing and showing to work properly, but just read it as a blank CD.  To go with this... I am a legal transcriptionist and use a program called FTR player.  I downloaded some MP3 audio files and who won't play in my FTR player either, so I think it has something to do with. MP3 files, in the form of .wav files play in my FTR player very well.  Any help would be greatly appreciated.  Thank you in advance, Jodi

  Red flag.  CCcleaner.  If you used to "clean" your registry database, which can cause problems.  CCcleaner is also a good program, but registry cleaners do not help and remove what they think are "unused" entries in the registry that can cause problems later.

  Try to download the Real Player and see if that corrects your problem, but if it is not, you may need to restore your computer to the factory settings by your user guide's instructions.

  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. External hard drives 1 TB are about $85 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• Movie Maker 6.0 serious on DVD, then published original, and now it will not play?

  My daughter has made a movie about Movie Maker 6.0 and it burned on a dvd.  She then had to change the original.  Once it was published, it does not work on Movie Maker 6.0.  She cannot do anything with it.  Help.  It's a slideshow from Graduation.  Garduation is today!

  It is unclear what has happened and why the project will not play.
  It may be interesting to try to open Movie Maker 6 and go to... Tools /.
  Options / Compatibility tab and disable all filters / OK.

  If this does not help... I think would be best to start
  Over and re - create the project.

• Dimension D drive recognizes and 3000, but will not play two CD / DVDs. Says drive works properly

  Drive DVD (d) properties

  Material:

  WDC WD800BB - 75JHAO Type hard drive

  SAMSUNG DVD - ROM SD - 616E Type CD-ROM/DVD-ROM

  Slot 0 for both.

  System says that the device is functioning properly. I can't update, because I get a message that I have the most up to date available. I did the whole 'uninstall '. Once the computer is restarted, I got the "found new hardware". Yet, nothing. Only a few time a hourglass jumped to the top, but nothing has happened.

  The computer simply will not play anything - no CD-ROM, dvd or cd. Instead, the drive blinks several times and does nothing.

  However, the computer not only recognizes the drive, but if I hit eject. The disk opens. Once I put a cd/dvd/CD, the computer always says "Please insert a disk into drive D:".

  Help, please. And I thank you in advance.

  
  

• Some DVDs will not play on my laptop satellite

  I was redirected here from this forum: http://forums.toshiba.com/t5/Drivers-and-Utilities/tsstcorp-cddvdw-su-208bb-failing-to-recognize-dvd/td-p/463603

  I can't read some DVD (which will play on other computers) but some DVD will not work.

  As per link above the pilot is tsstcorp cddvdw su-208bb. Tried uninstalling the drive and reboot but no effect.
  I don't know my exact model. It's just a Satellite, and this is the only information I can find.

  It is not easy to say what may be wrong with that. Try to clean the lens and check it once more.

• House DVD will not play

  I made a DVD on a DVD recorder.  He plays very well on this DVD player and other DVD player.  However, it will not play on my PC (which is P6210 with Windows 7).

  Explorer Windows actually said the DVD is blank (zero points).

  Any ideas?  The DVD player manual says something "codec", but can't find anything about it on the HP support site.

  Big_Dave,

  Your right to the mark. Step 9 to explain it. Even with my JVC deck, you have to Finalize the media.

• Pavilion 17-e013nr: dvd will not play some formats that played before, does not recognize the format of bup.

  Computer will not play a dvd it has played previously. The dvd is in a bup format. I cleaned up some new downloads out of my computer and am thinkgin can I have deleted the program for my dvd media.

  Hello

  I think he must have other formats too, not only BUP. Please try the video player next, he'll play almost all video formats.

  http://www.videolan.org/VLC/download-Windows.html

  Kind regards.

• DVD will not play in my Windows Media Player.

  My windows media player will not play the dvd. I get the message ' is Impossible to access the file, the file may be in use you will no longer have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "

  My windows media player will not play the dvd. I get the message ' is Impossible to access the file, the file may be in use you will no longer have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "

  ==========================
  Maybe you need a DVD decoder:

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  Or... you'll love the free VLC Media Player:

  VLC Media Player
  http://www.videolan.org/

  And it may be worth trying to install a codec pack:

  * Proceed at your own risk *.

  CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates)

  Good luck. John Inzer - MS - MVP - digital media experience

• Burned DVD will not play on a DVD player

  I downloaded a 22 minute video I want to burn to a DVD in my DVD player.  I tried on the DVD-R and DVD + R.  They burn the disk but will not play on the DVD player.  The error message indicates that the reading is not available on this disc.  I used the windows search support to problem solve on my own, but have had no success.  I made sure that I am selecting the option of CD/DVD drive to use the ISO image format.  I entered my option and I have no filters.  I have the video on NTSC format since I'm Pennsylvania / U.S..  I have not tried burning on slow or average speed because it burns the DVD without problem it just will not playback on the DVD player.  What do you recommend as my next plan of action for troubleshooting.

  I guess that the video is not DVD compatible Mpeg2.  According to the DVD player, some will play other formats, too.  If there is no program for video on the computer, try Windows Movie Maker (free) to see if the video will too be converted to standard DVD Mpeg2.