CD does not not under vista

Similar Questions

• Lightroom 6 installer think that I am running Vista on my computer because it says that Vista is not supported.  I'm not under Vista, I have Win 7.

  Tried to install Lightroom 6 on my Win 7 PC.  He gave me the error code 15.  I ran the CCleaner which has been proposed.  Then tried to install.  Now, it seems that he thinks that I'm running Vista on my computer because it says that Vista is not supported.  I'm not under Vista, I have Win 7.  What should I do now?

  Hi mmcmm,

  See this thread: try to install lightroom 6 on windows 7 get interface requirement not met windows vista not supported

  Kind regards

  Claes

• Tecra M9 and M10 wheel Volume does not not under Vista

  Hello

  I hope that someone can help me, I'm Vista using Microsoft Deployment Workbench deployment for Tecra M9 and M10 material and the volume knob will not work. I added the drivers of Toshiba in Deployment Workbench, while they are presented the machines via Plug n Play, volume button do not work. I also deleted the drivers of Deployment Workbench and installed the drivers manually on the machines, this installs fine, but volume knob will not work. I have two development servers, Win Server 2003 and Win Server 2008, the two do not run successfully the pilot slots.

  If I deploy a standard Win Vista Enterrprise 32 bit OS of DVD hardware, with any driver when it is installed, the volume wheel works. I can then manually install the audio driver and the volume button still works. But if I deploy the same exact DVD based OS of Deployment Workbench, the volume knob does not work?

  Any help would be greatly appreciated, as this is doing my head and holding up the deployment of the new image.

  Thank you
  Paul

  Maybe you are trying to install the driver Audio of M9 M10 or vice versa?

  You install the driver Chipset Intel and value-added package first? (this is important)

• Administrator password does not not under Vista

  I have a new desktop computer with Vista and have worked on getting it set up. I've set up user accounts, but my password of the administrator account does not work. I tried all the options and checked the capslock and even tried a few misspellings, even if I don't have a problem the first 4 or 5 times I had used it. is there anyway to reset it without having to reinstall Windows since I don't have a password reset disk?

  You did not account for additional user with administrative privileges? If this isn't the case, you will need to use a program like NTpasswd empty password for your account, so you can connect.

  Download the bootable CD .iso image file, burning with burning software, third party (as an image, not in the form of data), starting with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.

  http://home.eunet.no/~pnordahl/ntpasswd/

  Once you're back in the system, here are my suggestions for how to configure user accounts in Vista:

  You absolutely don't want to have only one user account. In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.
  MS - MVP - Elephant Boy computers - don't panic!

• Graphics driver does not not under Vista

  first disable my graphics driver does not work. & I don't know how to fix or install. What should I do? that you install? I am computer jargon challenged. so if you could speak in terms I can understand & explain to me if I do not receive it. I'd be happy. TY Heather

  * original title - need a lot of help please.*

  Hello

  Troubleshooting explains how to upgrade the video driver (graphics card) and others as needed.

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - graphics card - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on set to update driver
  (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with
  their own software and drivers and all other main drivers that you have.

  Now in system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), then the manufacturer of the device
  site (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and)
  software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AS ADMIN - reset after each
  installation.

  Always check in the Device Manager - tab drivers version you install actually shows up.
  This is because some restore drivers before the most recent is installed (particularly that audio drivers) so
  install a driver - reboot - check that it is installed and try again if necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check manually
  by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

• Copy / paste does not not under Vista

  I use the piece of garbage called Vista Home edition.

  Microsoft can't even their own system to work. They may not even recognize their OWN identification numbers when I go to get help.

  What kind of society.

  Copy and paste it on Vista Home edition does not work and has not worked for a long time.

  Any ideas how to operate?

  If your cam to pre-installed operating system OEM may be responsible for your assistance and not Microsoft support?

  What ID product fails to be recognized?   There is a time limit on how long Online Support is available to you the spirit, to get the thing to work seems to involve jumping through hoops in my opinion.   Some things you have to do is to add sites to the IE Trusted Sites, allow ActiveX to run and possibly start IE by right clicking and selecting the option 'run as administrator '.  Even in this case it can be successful, I am yet to find someone who contacted Microsoft through their online Support successfully, I suppose it should work, otherwise the person at the end of the right Microsoft got a real cushy job.

  Microsoft Technical Support phone numbers
  http://support.Microsoft.com/kb/319726/en-us

  Microsoft U.S. Office locations
  http://www.Microsoft.com/about/companyinformation/usaoffices/en/us/default.aspx

  Online Assisted Support options
  http://support.Microsoft.com/select/default.aspx?target=assistance

  Microsoft contact information - Is supported by the phone number, Email
  http://support.Microsoft.com/GP/phonelist#phone

  Upgrade to Windows 7, Office Small Business has lost
  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/75af1220-321b-48A2-990c-4297ed0647cd

  What's the problem with him copy / paste?  Drag and drop work for you?  Have you tested with another mouse?  They work if you log Mode without failure or creates another user in Normal Mode?

  Vista Advanced Boot Options (or 7)
  http://Techblissonline.com/Vista-advanced-boot-options/

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Take a look through some of the similar posts on toward the right in 'related topics '.

  Help please! I can't use the copy & paste!
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/e04cc6b7-cb95-4e24-b69f-5857eb3fea01

  Not possible to paste pictures of MS Word for widows Mail?
  http://www.Vistax64.com/Vista-mail/116614-not-possible-paste-pictures-MS-Word-widows-mail.html

  No shortcuts keyboard Ctlr C then Ctrl V or Ctrl X then Ctrl V work?

• Keyboard for Indian Format options does not not under Vista

  Using the keyboard for special characters Options does not not according to Indian Format for Windows Vista.

  I'm using windows vista but cannot use the arobas option above digital key2?

  Hi Nadia Vallet,.

  In addition, please see the following article with useful information about your question:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-keyboard-layout

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Dv5 does not load Vista, failing hard drive test

  I have a laptop HP DV5 with Vista - 2 years and more under warranty.  He had some problems with Windows Update error codes, I did a system restore to a point a little backward.  This does not solve the problem, so I tried to cancel restoring the system back to the State of our days.  This was fine, but then the system locked up when he tried to restart itself-it has attempted to restart for 45 minutes and got nowhere, so I turned off.  This throw Windows completely, as the system restore was not full yet, so now that my computer will boot the HP logo and start up options, but then get hung up trying to load windows (I have a black screen with a scroll bar down cycles endlessly with Microsoft Corporation written below)

  Bottom line - I can't get the computer to boot windows, and system recovery does not work.  Tried directly from the hard drive and vain and ordered HP-put one disk disks this morning, once removed from the HP screen, I get the bar "Windows loading files" at the bottom, which ends in about a minute, but then it just goes back to its normal load upward, with the scroll bar and Microsoft Corporation at the bottom of the screen.  So I can't open basically even the system restore window.

  I just ran the self-test of the primary hard drive and had hard disk Test do not.  I'm not particularly computer saavy (I didn't know that to do this test in reading this forum), if anyone can tell me what I should do next?  I don't want to go somewhere and get screwed!

  Thank you!

  -Becky

  Hi Becky,

  The result of the primary Hard Drive Self Test means your hard drive is defective and must be replaced.  It is the HARD drive in my dv5.

  http://www.Amazon.co.UK/320GB-Scorpio-WD3200BEVT-SATA-5400rpm/DP/B0013E0A0M

  Hard drive replacement is not difficult (generally remove two screws from the cover of the HARD drive on the bottom of your laptop, remove a futher two screws holding the disc in place then pulling on one leg to lift the reader.  Then unscrew the metal casing around your old drive - often called the caddy drive - attaching to your new drive, insert the new drive, fix it with two screws and replace the cover.  Then simply insert your recovery DVDs to load Vista on your new drive.  Here is a Youtube video showing this.

  http://www.YouTube.com/watch?v=8U23F8JuKKE

  I hope this helps.

  Best wishes

  DP - K

• Gamepad not working do not under Vista

  My Windows Vista loaded and runs MS Combat Flight Simulator V1 OK using the keyboard, in 'settings' program, he recognizes the joystick for calibration but joystick doesn't work just not in the game itself. I tried this fix below - but no luck. Any other ideas please?

  If you upgrade to Windows Vista, one of the things that you may find is that your older programs works under Vista. Many software publishers are working to release Vista compatible versions, but in the meantime, you can try running in Compatibility Mode applications.

  To do:

  1. open Windows Explorer.
  2. Locate the executable file of the application.
  3. right click on the executable, and then click the properties option.
  4. Select the Compatibility tab.
  5. Select run this program in Compatibility Mode option.
  6. in the drop-down list, choose the operating system that you ran before upgrading to Vista.
  7. If necessary, select run the program as administrator.
  8. click on OK.

  Hello

   
   
  What is the brand and model of the gamepad?
   
   
  I suggest the following steps and check for the device.
  a. click the Start button.
  b. click Control Panel, open game controllers.
  c. click on your game controller, and then click Properties.
  d. on the Test tab, test the game controller to verify functionality.
  If this does not help, you can follow the steps in this article mentioned below:
  http://support.Microsoft.com/kb/831361
  (Valid also for all Microsoft games)
   
   
  See also:
  The problems of gamepad:
  http://support.Microsoft.com/kb/811463

• Satellite P300D-15O - display drivers does not-XP/Vista

  Hi all

  After buying this Satellite P300D-15O tried several times the reinstallation of operating systems: Windows XP Pro, Windows Vista x 32 and x 64 version, but does not display drivers offered by Toshiba downloads: it runs only the Windows standard vga drivers after you have installed and not working drivers for AMD/ATI HD3470.

  Max resolution is 1152 x 864. The laptop has been pre-installed with Vista Home Premium and good work and resolution of 1440 x 900 ATI drivers; but I want a new installation on my own without any addition of pre-installed software from McAfee/Google etc - The Toshiba telephone Customer Service can't help for this problem, they have NO answer, :(! Is there a solution with the inf files? Can anyone help!

  THX, endo

  Hello

  In my opinion, make you a huge mistake. Laptop with factory settings is perfect set up and all hardware components are working properly. OK, I understand you don't want to use some additional preinstalled software, but you must understand that you don't have to do it.

  I have absolutely the same option about it than you and the first thing I did with my Satellite P200D is to remove all the software, I don't want to have installed on the system.

  You can do the same thing. Go to the control panel > programs and features and then remove all the additional software. Later, install your favorite software and be happy with it.
  I do the same thing. Why install OS Vista own especially if you ve already paid for a Vista license.

  What do you think of this?

• Satellite Pro L40 - wireless adapter does not work - Vista

  I recently had some problems with my laptop.
  A couple of weeks, I put in a disc of OpenSuse.
  It's not stable anything, but locked me out of my original Vista operating system.

  I reinstallled Vista Home Basic, but there are a few problems.
  Mainly, my wireless adapter does not work.

  When I flip the button to turn it on nothing happens and it is not recognized in Windows.
  I installed Atheros Driver, but still nothing happens, light is not yet.

  Any advice?

  Hello

  First check the device-> network adapters area manager
  You see the WLan card? Or the unknown device appears?

  If there is an unknown device, then the WLan driver has not been installed correctly or you tried to install a driver badly these two options are possible.

  Remember that your wireless network card? Maybe it was a Realtek WLan card?

  If it's a Realtek WLan card, try the WLan driver from the Realtek website and look for 802.11 g (RTL8187B) chip or you will simply check the page of the European driver Toshiba too the Realtek WLan driver also appeared on the Toshiba page

• code 80070020__could does not update vista

  When I tried to installed an important update it keeps failing

  http://support.Microsoft.com/kb/883825

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  If the above does not solve the problem, repost in the appropriate Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• XP does not see Vista, but Vista see XP...

  Articles:
  (1) - 1pc with Windows Xp
  (2) - 1pc Windows Vista
  (3) - Linksys router

  First of all, I tried to do a network (connection) between two pc's (machines).
  The problem is that the pc of Windows XP does not see files and a Windows Vista-based computer, however, the computer Windows Vista see Windows XP machine.
  So in practice, it works only on one side. I tried to ping the Vista machine on my XP machine and it works. (succesfull 4 and 0 failed)
  I also tried to look on Google and this forum, but I can only find the opposite of my problem (XP Vista instead of XP Vista).

  Thank you very much.

  Okay, take a look at this article and see if it gets you on track: http://www.howtogeek.com/howto/windows-7/share-files-and-printers-between-windows-7-and-xp/ 
  -B-
  http://www.officeforlawyers.com
  Author: Guide to counsel for Microsoft Outlook

• Does not work Vista startup repair cannot repair, System Restore cannot repair.

  I have a Dell Inspiron with Windows Vista. On commissioning, it is said: "Windows could not start. A recent hardware or software change might be the cause. "then offer to 'Launch Startup Repair' or 'start Windows normally '.

  When asked to boot normally, it tries to start, but broken, return back to this page.
  When he was asked to run the Startup Repair, it opens the program scans the system for several minutes and then says "Startup Repair cannot repair this computer automatically.

  When we click on diagnostics and repair details, it is said:

  "Last startup successfully: 03/10/2011 15:42:52.
  Number of repair attempts: 8

  Details of the session
  Drive system = \Device\Harddisk
  Windows directory = C:\Windows
  AutoChk run = 0
  Number of root causes = 1

  The test is performed:
  Name: Search for updates
  Result: Completed successfully. Error code = 0 x 0
  Name: Drive for System Test
  Result: Completed successfully. Error code = 0 x 0
  Name: Troubleshooting disk
  Result: Completed successfully. Error code = 0 x 0
  Name: Metadata for the drive Test
  Result: Completed successfully. Error code = 0 x 0
  Name: Target OS Test
  Result: Completed successfully. Error code = 0 x 0
  Name: Checking content Volume
  Result: Completed successfully. Error code = 0 x 0
  Name: Diagnostic Boot manager
  Result: Completed successfully. Error code = 0 x 0
  Name: Diagnosis of the system startup log
  Result: Completed successfully. Error code = 0 x 0
  Name: event log diagnosis
  Result: Completed successfully. Error code = 0 x 0
  Rated: Internal audit of State
  Result: Completed successfully. Error code = 0 x 0

  Root cause found:
  Startup Repair tried several times but still not determine the cause of the problem. »

  If not, we can look at the advanced settings:
  System Restore = "no restore point created the disk of your computer system. To create a restore point open System Protection.
  Windows complete PC Restore = "a valid backup location is not found. Windows cannot find a backup on this computer. »
  = Windows Memory Diagnostic tool does not solve anything when parsing
  Command prompt
  Reference Dell Factory Image Restore = not tried but am avoiding wiping all your own hard drive for as long as possible...

  He's not in Mode safe, and I don't know what is happening. It happened when I shut it down (holding the power button down) update that it had frozen.
  What should I do? Thank you.

  Hello

  Method 1: I suggest that you do the startup repair using the Windows Vista installation disc and check if it works.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  a. Insert the installation disc.

  b. restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  c. If prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  d. choose your language settings, and then click Next.

  e. click on repair your computer.

  f. Select the operating system you want to repair, and then click Next.

  g. in the System Recovery Options menu, click Startup Repair.

  See: How can I fix a startup (startup)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  Method 2: If above method fails, then run the command chkdsk WinRE (Windows Recovery Environment) and check if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Note: Select command prompt from the system recovery options and follow the mentioned below as follows:

  Type the following command and press ENTER.

  Chkdsk /r

  Note: Chkdsk /r command erases / corrupted hard disk data corrections. Some of your personal files/data may be erased.

• CD/DVD not detected or does not, OS-Vista (Home), SP1.

  Laptop HP Pavilion DV700, OS Vista Home Premium, SP1, CD/DVD not detected and does not. Please advice. Thank you.

  If the CD is not autostart, try to look at its contents in Windows Explorer. Also note that you posted the answers Sandbox Forum, which is for the test, not for technical questions.

  Stefan Blom, Word of Microsoft MVP

• System repair & Recovery does not work / Vista Windows Mail won't open attachments sent with PowerPoint Slide Show

  System repair & recovery does not work.  When I use it, it never restarts the computer.  I have left running and went to bed and is still running the next morning.  The SR & R is grayed out and will not open.   When I restart the computer after that it ran all night, a message appears to tell me that I cancelled the operation.  Help!

  I have another problem with Vista Windows Mail; I can't open attachments are sent using Microsoft PowerPoint Slide Show.  The message is: * this file does not have a program associated with it for performing this action.  Create an association in the set Associations Panel.  I don't know anything about computers or the control panel.  How can I fix these problems?  Help!

  Problem with recovery to factory settings or system/process of repair software, contact the manufacturer of your computer.
  It is their software/recovery process, not Microsoft.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You need PowerPoint or a viewer PowerPoint installed on your computer to read PowerPoint attachments.
  Learn about file Associations in the lower part of this response.

  need .doc or .docx Word or a Word Viewer for playback file extensions, etc, etc.
  .xls Excel need.
  need for .pps PowerPoint

  Here are the download links for free Microsoft Word, Excel and PowerPoint viewers:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3657ce88-7cfa-457a-9aec-f4f827f20cac&displaylang=en

  Word Viewer

  View, print and copy Word documents, even if you don't have Word installed. This download is a replacement for Word Viewer 2003 and all previous Word Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1CD6ACF9-CE06-4E1C-8DCF-F33F669DBC3A&displaylang=en

  Excel Viewer

  Open, view, and print Excel workbooks, even if you don't have Excel installed. This download is a replacement for Excel Viewer 97 and all previous Excel Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=048dc840-14e1-467D-8dca-19d2a8fd7485&displaylang=en

  PowerPoint 2007 Viewer

  Microsoft Office PowerPoint 2007 Viewer allows you to view the presentations of all the features created in PowerPoint 97 and later versions.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And here is a link to a set of free office of Applications:

  http://www.OpenOffice.org/

  And to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  See you soon.

  Mick Murphy - Microsoft partner