CD drive does not open

I put a CD in the drive and it will not re - open.  Any suggestions?

Hi also what dave5 said, that there should be a small hole in front of the reader, straighten a paper clip and use it to open the drawer.

Tags: Dell Drives

Similar Questions

  • Satellite L500-126-CD/DVD drive does not open very well unrolled

    Hello

    I just got my second Satellite L500-126.
    I traded my first for a new because the ESCAPE key got stuck sometimes and made a grinding sound.

    Now, with my new one, I noticed that my dvd drive does not open very well unrolled and 2 bars of silver metal bit come out with the car when I open it.
    Is this normal?

    Also, when I close the dvd player, I hear a little noise "ping!"
    Like a spring, or something. Is that also normal?

    Thanks in advance.

    Hello

    I'm not quite sure what you mean by 2 small bars of silver, but the reader of my laptop s contains two metals (runners, railway).
    This is normal and these pieces are important to ensure that the drive can eject properly and could remain in a good position.
    Still, you will hear a short click Open and close the drive.

    So I guess it's ok.

  • CD drive does not open on the hard drive of the computer.

    Original title: on my hard drive DimensionE521 the CD-Rom drive does not open.  He starts to and then stops. The computer says it's OK? Help?

    I had this problem and another time after playing with him for days, all of a sudden it just opened.  There is nothing in the drive - I'm sure of.  Everyone has to experience this problem.

    Hello Nannytosix,

    If you look very close to the door of the CD player, you will probably see a small hole somewhere around him.

    What you need to do is unfold a paper clip and push it in the hole and it should open the CD drive manually.

    I encourage you to consult the manual to check this.

    Best regards

    Matthew_Ha

  • DVD drive does not open.

    DVD drive does not open.  Won't open with the emergency eject button.  Once opened, it will close with the eject / close button.  How can I fix it?  This can cause the drive open suddenly do not?

    Thanks for any help you can provide.

    Hello

    · What is the number and the model of the computer?

    · Do you remember all the recent changes on the computer before the show?

    It seems to be the problem with the computer's hardware. You can check with the manufacturer for assistance on the same.

  • DVD drive does not open. What can I do?

    Yesterday, the DVD drive in my Dell laptop, Inspiron, Windows Vista has worked very well. This morning, the drive does not open when I pressed the eject button, although the indicator flashed several times. Dell support site mentions try "eject feature in Windows", but I can't find information about this.

    It is important to get the DVD drive works because I'm ready to upgrade to Windows 7.

    How can I fix the drive?

    GordonP

    http://www.ehow.com/how_2324439_eject-stuck-DVDCD-drive.html

    http://www.fonerbooks.com/laptop12.htm

    But first of all, you can go in my computer, find your dvd drive, right-click on it and click on eject.

    If this post answers your question, click mark as answer .

  • My Cd drive does not open

    Original title: BD - rom drive

    My Cd drive does not open. I even sent it back to the factory to get the engine replaced and it used to always open. And if it opens, it read any disk. What should I do? Can I open the player through my laptop instead of hitting the button on the outside?

    Hello Jayde,

    You can look for a tiny hole on the draw draw in which insert a paper clip to manually eject the CD player draw. Follow these steps and check if that helps.

    Step 1: Open Windows Explorer, right-click on the drive icon and choose the option to eject it. If it is ejected from your CD-ROM drive tray, button on the hard drive is faulty and it is recommended to replace the disk.

    Step 2: Also boot in the BIOS and check if you can eject the CD by pressing eject CD player if the problem persists then drive is defective.

    Warning of the BIOS:

    BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    Step 3: I suggest to start in safe mode and check if you are facing a similar question:

    Start settings for Windows (including safe mode)

    http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-including-safe-mode

    Let us know the status of the issue after following the steps above. So that we can help you further.

  • Satellite L350 - CD/DVD drive does not open

    I have a new laptop, less than a month, but his habit of CD/DVD tray open by pressing eject button. Eject-do a right-click on its icon does not open it no more.

    There is no disc inside, it is visible in the BIOS, no sign of a driver problem in Device Manager. I tried reinstalling the driver, but that didn't help.

    Any solution for this problem would be appreciated. Thank you.

    Hi inecro,

    If the CD/DVD drive doesn t open more I think that you can do anything in this case.

    I can only confirm what writes Akuma. You need to replace the CD/DVD drive and you get a new from an authorized service provider. If your laptop is under warranty you can get a new one for free.

    I had the same problem a few months ago. EPA has replaced the CD/DVD drive in a few days and I come back my laptop. Very fast service and the technicians are friendly. :)

  • folder on the external drive does not open in a new window

    on iMac OS 10.10.5, when I open a folder (by double-clicking) on an external drive, the folder does not open in a new window, but in a window that replaces the window that was opened.  I looked for a system setting that controls this (in system PREF), but I couldn't find anything useful.

    If you control - click the folder there is an option to open in a new tab. I don't know of anyway to set up in system preferences.

  • Disk drive does not open. What is a girl to do?

    I've been ripping CDs to music on computer, and now my drive doesn't open. Can you help me solve this problem?

    Hello

    If they don't help then check with the manufacturer of the system or in support of the Drive manufacturer,
    their documentation online and drivers and ask in their forums (if any) on the known issues.

    The drive is just stuck?

    For the readers of the status bar:

    Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
    a paper clip that will release him and the reader to open.

    Create a trombone in car Opener
    http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

    Open a CD/DVD player with a paper clip.
    http://www.josepino.com/?open_cd-dvd_paperclip

    =================================

    For the readers of the slot:

    Check with the manufacturer of system on how do to eject the disc.

    Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
    http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

    Be careful as you may damage the player using the method below:

    You may need to get the driver to work 1 However, this could still work.
    http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

    The method used on the Mac could work
    http://www.YouTube.com/watch?v=wpWieIoBBrk

    How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
    http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

    Also have heard double tape on a credit card or play can work.

    ===========================================================

    If necessary:

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • My D: drive does not open

    I have a drive has opened to my D drive, but it does not open, I can't even insert discs, little help please!

    Thank you

    Clayton C.

    Try to power - off for pc, remove the computer cover, connect another IDE, CD or CD - RW

    connection, set the pins plastic on if necessary device (master or slave). XP will

    Reinstall the hardware auto.

  • CD-ROM drive does not open

    Separated from this thread.

    How can I open a disc in my drive, but does not open on my screen?

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the system manufacturer and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    These are the keys in my opinion, are those in question - secondary-keys for the CD/DVD drive of course because there will be other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://Club.myce.com/F61/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  • CD drive does not open and the light does not work

    original title: single CD player problem

    The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

    My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

    When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

    I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

    WTFFF ideas? I really hope that its not the motherboard

    There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

    "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

    Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

    I tried to connect on a couple different SATA ports on the motherboard.

  • hard drive does not open

    Yesterday my HDD on Inspiron 620 does not open.  He opened with trombone out of disk.  Once I had drive it would not open again.  When I turn on the computer disk hard fact sort of creaking, noise, but stops after about 20 seconds.  Any suggestions?

    danapoint

    You need to replace the CD/DVD/RW drive, it's broken.

    DVD SATA drives are cheap, available for $20.

    http://www.Newegg.com/CD-DVD-Blu-Ray-burners-media/category/ID-10?name=CD-DVD-Blu-Ray-burners-media

    Bev.

  • DVD/CD RW drive does not open

    Drive DVD/CD-RW door does not open.  Tried to open it by going to my computer, media player and selecting "EJECT", but I get a message "error with the player."  Any suggestions?  I have not had any problems in the past with the drive and burned many CDs.  It is not a CD in the drive now.  My computer is only 6 months old.  What can I try to get to open my car door?

    Hello

    For the readers of the status bar:

    Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
    a paper clip that will release him and the reader to open.

    Create a trombone in car Opener
    http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

    Open a CD/DVD player with a paper clip.
    http://www.josepino.com/?open_cd-dvd_paperclip

    =================================

    For the readers of the slot:

    Check with the manufacturer of system on how do to eject the disc.

    Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
    http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

    Be careful as you may damage the player using the method below:

    You may need to get the driver to work 1 However, this could still work.
    http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

    The method used on the Mac could work
    http://www.YouTube.com/watch?v=wpWieIoBBrk

    How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
    http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

    Also have heard double tape on a credit card or play can work.

    I hope this helps and happy holidays!

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • My E: drive does not open to receive a disc. It seems to be locked up? Any ideas?

    My E drive drawer does not open to receive a disc.

    If you have tried all of the usuals, i.e. press the CD button open or right click on the drive in "computer" then press eject, (finally some anyway) most CD/DVD players have a small hole on the Panel of the real player, sort of a manual ejection.

    Push something long and thin (maybe a paperclip) to the bottom of it, and it should open. Try to do with the PC turned off initially, but Ive done with the power on.

    Just go simple and not too heavy handed.

    This gives the idea and pictures - http://www.computerhope.com/issues/ch000214.htm

  • Drive does not open files

    Adobe Reader does not open the file, it says that it says "there was an error opening this document. Access denied' I re - download the same file, it always opens not.  The file opens as a web-based file, but not like a local on my system file.

    How can I get Reader to open my files?

    Win 10 I have 24 GB of memory running and execution of 6 core CPU at 3.5 ghz

    Thank you

    Hi kranti ,.

    Please try to disable the protected mode by going to edit > Preferences > select "Security (Enhanced)" in categories and uncheck the option 'enable protected startup mode '.

    We also indicate the exact version of the player you have.

    Let us know if that helps.

    Concerning

    Sarojini

Maybe you are looking for

  • Pages will not open documents

    Hi all I have version 5.6.2 pages on a macbook pro Ox El Captain 10.11.6. Suddenly, last month, pages began to refuse to open a specific document, not all, just a. But today, he refuses to open another. The documents that we are talking about are "co

  • Tecra 550CDT: where to find the compatible DVD player?

    My father has an old 550CDT and wants to replace the CD with a DVD player. The connector is different to modern readers. What do you call the conector type?Is there any slot-in DVD for the 550CDT?I'll have to get a USB connector and use a standard pl

  • What are the blue lines in the edition of flex?

    What are the blue lines in the edition of flex?

  • How can I get an e-mail transferred to my documents

    I want to save info., in an e-mail.I would like to have in the document section.  What is the best way to doo - this?

  • You must format the drive until you can use it!

    Hello.. can someone help me please... I have Windows vista... I have an extra external HARD drive... Every time there is an upgrade of vista I can't access my external hard drive, I click Open, he said: "you need to format the disk in E: drive before