CD - DVD player gives me an error code 39. It wil work not at all.

Similar Questions

• Problem with DVD player and get the error code 19 Device Manager

  Original title: TSSTcorp CDDVDW SH - 224DB ATA device

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  How to fix it please Message Please please how to fix it

  Hi Emerald,

  Please contact Microsoft Community. I understand that you have a problem with the CD\DVD drive and get the error code 19 Device Manager. I've surely you will help solve this problem.

  To better understand the issue, I would like to know if you have any recent software or hardware on the computer changes before this problem?

  This problem might have occurred because of these reasons:

  1. Install or uninstall the CD or DVD recording programs.
  2. Uninstall Microsoft Digital Image.

  Try the steps listed here and see if it helps:

  I suggest you try the procedure described in article which will correct corrupted registry entries. Check if it helps.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Satellite P200 - 1FC: CD/DVD player won't start - error Code 10

  My Satellite P200 - 1FC was purchased in January 2008 and preloaded with Vista Home Premium. The DVD/CD drive is listed in the device as "TSST corp CDDVDW TS - L632H ATA Device" Manager.

  Initially, the drive worked perfectly, but recently refused to start. Device Manager it shows now with a yellow exclamation point and its status is given as "this device cannot start. (Code 10) ».

  By clicking on 'could not load driver software' product solutions but not solution.

  The search for similar issues in the forums of users suggests that use of a page of Microsoft Support Help & directed "the CD-ROM drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista".

  However it is to change the registry! As a relative novice, I am reluctant to do unless I can find no easier way.

  Should I bite the bullet and and enter into this minefield, or is there a better way?

  > At first the car worked perfectly, but recently refused to start. Device Manager it shows now with a yellow exclamation point and its status is given as "this device cannot start. (Code 10) ».

  Certainly, this error is caused by an incorrect registry entry.
  I had this error several times and I solved this disassembly of these registry keys upper and lower filters:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Here are a few steps how it worked on my Windows system;
  -J' removed the Device Manager CD/DVD drive
  -Then edited the registry as described above
  -Restarting the laptop

  I'm sure that this will also help you.

  Good bye

• DVD - CD Microsoft Fix - it give me an error code 0 x 80040154

   I can do a backup with my WD external drive but I can't do a backup with a DVD. I can read DVD and CD, DVD - CD Microsft Fifix - it gives me and error code 0 x 80040154

  See this thread:

  Solve this error code 0 x 80040154
  http://social.Microsoft.com/forums/en-us/fixitcenter/thread/c8e099b4-d48f-494c-9baf-83d93e8740fd/

• I'm having problems trying to watch a dvd, I get the C00D116A error code what can I do to solve the problem?

  I can't play a dvd I get an C00D116A error code.

  Hello

  C00D116A
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5230&ID=C00D116A&ContextId=10&OriginalID=C00D0FAA

  If XP, Vista, Windows 7 or Windows 8 error usually means that duty to update
  the video driver.

  Check with support of the manufacturer of the system (motherboard for custom systems manufacturer) updates
  the video device and/or the manufacturer of the real video device like ATI, Nvidia or Intel.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When I use choose the partition Windows in MAC, it gives me an error code 0 x 0000225.

  When I use choose the partition Windows in MAC, it gives me an error code 0 x 0000225.

  I installed everything windows 10 on my macbook pro with the 2013 retina is ready, but the computer goes to windows it gives me an error, it tells needs me to be repaired

  need some help please and sorry I don't have a good English

  

  It gives me this error

• Windows Live Mail is unable to send emails, but receives, gives the 0x8ccc0003 error code.

  When I write emails windows Messaging cannot send emails, but is able to receive the incoming mails. On the contrary, it gives a 0x8ccc0003 error code. How can I solve this problem. I use windows live mail 2011

  Thank you.
  John D

  Hello

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.

• Microsoft Update maintains did not give me the error code "646 windows update encountered an unknown error" __Help__Thanks in advance

  Windows Update continues to not give me an error code "0000646 Windows update encountered an unknown error.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error.

  try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error. How can I fix it?

  Hello

  1. what patch did you try?
  2. update you are trying to install?

  Method 1:
  You can follow the steps in troubleshooting this article and check:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:
  You can also try the steps from the link:
  Windows Update, error 80240016
  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.
  http://support.Microsoft.com/kb/957307

  Method 3:
  You can also perform a clean boot, and then try to install and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• Uninstall itumes give me the error code 2330, Revo didn't work.

  Uninstall itumes give me the error code 2330, Revo didn't work.

  Hello

  Follow the information of Apple at the below link or ask in their forums or the Apple support

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149

• Windows give me an error code 21, when itunes is installed.

  OK, here's my problem, I downloaded the new Itunes for windows 7 when I attach my ipod shuffle that he continues to tell me that the Ipod does not work correctly. I run the troubleshooting it tells me that it is uninstall the griver for mass storage device. Then it gives me an error code of 21.  ITunes works proplerly even if windows says there is a problem. When the ipod is windows taken down says that there is a problem with the mass storage device.

  Found this temporary fix that works.

  http://www.SevenForums.com/software/2862-iPod-shuffle-2.html#post147035

• The firewall is disabled. When I try to turn it on, I thought system cannot turn it on due to settings and it gives me the error Code 0 x 80070424.

  When I try to enable firewall on thought system cannot turn it on due to settings and it gives me the error Code 0 x 80070424.

  Error message 0 x 80070424 when you use Microsoft Update or Windows Update Web sites to install updates, or when you start Windows Firewall

  http://support.Microsoft.com/kb/968002>

  Method 6 is perhaps your solution.

  UTC/GMT is 06:42 Thursday, September 13, 2012

• Metro Apps does not it gives me an error code 0 x 80070002.

  Well, I feel like I'm beating a dead horse, and I searched through these forums to find answers without end. Either find the thread dead and no patch or the latest comments in 2012 and 2013, so I thought that maybe I could have more luck if I just posted my own question and hope for a response.

  This morning, I noticed that none of my apps metro are working, mail, weather, sports, calendar, even the store. I tried some different suggestions I found on here and other sites as well, but nothing seems to work. Initially the apps were all simply not anything, I click on the tile and it would be as if I never clicked on it at all, they would not literally nothing. Now, I noticed that each one of the metro app tiles have a little x in the corner. I did not updates on my computer, I have not filed my OS, I'm still on windows 8, which is installed on my PC and I am not and will not be interested in 8.1. I installed it once when it was first offered for free and it completely destroyed my computer and had to restore everything to the factory and have lost everything.

  I've tried so far, corrections

  1 reset the app store - I was able to reset the cache by using the WSReset.exe and it does restore and restore the app store, so that the store works now but still nothing else.

  2 update apps have proven to be updated applications and he always tells me ' this application has not been installed - view details "when you click on details it give me the error code 0 x 80070002.

  3 uninstalled apps - try to reinstall I get the same error as above (0 x 80070002) code.

  4 app Troubleshooter-Ran this problems found.

  some security settings are missing or have changed, not fixed

  cache of Windows store may be damaged and not set

  Windows store the configuration may be damaged-detected

  5 sfc/scannow - ran this and it says he has found corrupt files but was unable to remedy.

  6 a dial-up user account Microsoft to account local, unmodified, changed to the Microsoft account, still no change.

  7. created new user account local and all seem to be ok, the apps wouldn't work correctly but for me it is not a miracle, doesn't help all my admin account.

  Sorry, it's become so long but I want to just make sure that anyone who can help has all the information they may need. I hope someone can help me with this.

  Hello

  Sorry for the inconvenience caused.

  Thanks for posting your query on the Microsoft Community. Could you please answer the following questions so that I can help you better.

  1. do you use proxy connections to connect to the internet?
  2. do you get an error message?

  3. What is the brand and model of the computer?

  You may experience this problem if the applications or drivers of graphics cards are not updated. Follow the steps in troubleshooting of these methods and check if that helps:

  Method 1:
  You can see the link to download and run the Troubleshoot utility app on the computer that checks all the problems with Windows applications on the computer:

  Step 1:

  
  Run the troubleshooter of App

  Before I provide the steps for troubleshooting the app, I want you to know some basic information before running an application:

  > User account control settings need to be enabled.
  Note: User Account Control (UAC) notifies you before changes are made to your PC that requires administrator-level permission. By default, UAC is set to warn you as soon as apps try to make changes to your PC, but you can change how often UAC notifies you.
  > To align the apps, you need at least 1366 x 768 screen resolution.
  > Requires Microsoft account.

  Note: This utility automatically corrects some problems that may prevent your running applications, including the suboptimal screen resolution and security or incorrect account settings.

  Run the Troubleshooter of Apps. This tool can automatically identify and fix problems with the applications.

  Step 2: Please consult the following link for troubleshooting if the troubleshooter does not help:

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

   

  Method 2: I suggest to uninstall and reinstall the drivers for video card and check.

  First, download the graphics card drivers on computer manufacturer website:

   

  1. Press the Windows key + X, and then select Device Manager.
  2. You can look for graphics cards and expand it.
  3. Right-click on the graphics card and choose uninstall.
  4. Install the downloaded drivers restart the computer and check.

  If not being able to find a driver for your device, see the website of the manufacturer of the device, or insert the CD-ROM supplied with the device, and then follow the instructions to install the software.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• My photoshop will not update, it gives me an error code that is not listed.  The error code is U44M1P34

  I tried several times now to do the last update for the application of CC of Photoshop 2015, it will not install.  It gives me an error code that is not listed in the list that I found in the help section.  I hope that someone else has had this problem and knows what it is before I have to call and find someone who can give me only one I can't answer.

  Please check: U44M1P34 error message

• I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with per

  I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with permission. ?

  You can repair it yourself. I have a screenshot guide. You use app the Mac Terminal and a python (.py) script that comes with the recovery of the license for the Mac package.

  Don't forget to leave a space after typing sudo python and note that your password will not display any points. Simply enter it blind.

  Start 11 Message and take your time. It does not work. Layout error 150:30 opening Photoshop cs4 on Macbook Pro

  Gene