CD inserted in the computer opens Notepad

Similar Questions

• When downloading, by chance, I clicked on "always open this type of file. Now every time I download a file, the computer opens the first file. It's annoying. How can I cancel it?

  I use WIndows Vista on my computer.  When you download a file, I clicked on "always open this type of file.  Now every time I download a file, the computer opens the file first.  How can I cancel it?

  If you mean that you click always ask before opening this type of file which turned off, please see this article if this could help restore function:

  Re-enable always ask before opening this Type of file check box in Windows
  http://helpdeskgeek.com/how-to/re-enable-always-ask-before-opening-this-type-of-file-check-box-in-Windows/

  Scroll down to Windows 7 and Vista

  Important:  The article contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

• I tried to open a shortcut with Notepad and now each shortcut on the computer opens with Notepad and it's all over!

  So I need to edit this batch file, and I right-click on it to open it with something else. I found (which, it's logical!) particular option was not there.

  I created a shortcut for this, in the hope that the option within this drop-down list, which he was. I chose Notepad, then BAM. Every single shortcut on the computer

  opens with Notepad. I tried to click 'open with a default program', but who has just missed even more. But wait, it's even worse! Now my internet it is fucked up.

  Whenever I open it with its program file, it just opens upward from the downloads page; for Chrome and explore. I can't make a new log in because I gave a flash drive large enough to hold all the files that I need and I just need to stay on this one. Please help soon

  Jaden14541

  Hi Jaden14541,

  Please take a look at the article here with more troubleshooting for your question.

  I hope this helps!

• Try to set up my Elipse on my computer. Have the microSDHC card/w adapter. Where should I go from here. The chip is in the adapter but where to insert into the computer to get results!

  Try to set up my cell phone to Elipse with microSDHC card/w adapter.  The chip is in the adaptor, but where can I insert the adapter in the computer.  Have an inspiron 531.  "Any help would be greatly apprecialted!   =}

  Hi NancyDolezal,

  Connect the phone via USB. You must insert it into a USB port and check if it detects is.

• An analysis of the USP flash drive is essential to insert into the computer.

  I need to scan my Flash USB drive when inserted into my computer. I have Windows XP Home Edition and Microsoft Essentials as my virus prevention program.

  Insert your USB key, Point to computer on your Start Menu, right click USB choose scan with MSE. If the computer is not on your Start Menu click Start, all programs, accessories, System Tools, click computer, and you will see your USB key, right click, Scan.

• Windows 7 - after selecting a USER, the computer opens the selection screen of the USER - code throws again: 2000-0146 to diagnosis

  Computer seems to boot correctly.  Once a USER is selected in the USER SELECTION screen, the computer seems to proceed... but then the USER SELECTION screen opens again.  When you run the Diagnostic tests, the only error is 2000-0146

  Hello

  Thanks for posting your question on the Microsoft forums.

  I understand that you have a problem on your Windows 7 computer. I would certainly help with this question.

  This problem started after the recent update installation of Windows?

  Some members of our community have reported similar problems after the recent update of Windows KB3097877 installation on

  their Windows 7-based computer. The update has been re-released, uninstall and reinstall the update can help us get this problem is resolved.

  In order to solve the problem, I suggest you try the steps posted by Akil P responded on November 13, 2015 in the following thread and check if the steps help you to solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/flickering-screen-and-sign-in-problems-on-Windows/df9c8255-587f-4DBF-BB45-6639b29dc4ae?TM=1447375680761

  Hope this information is useful. Let us know if you need additional assistance, we will be happy to help you. ___

  _____________________

  Thank you best regards &,.

  Isha Soni

• Dialog box AutoPlay not appearing not to when the memory card is inserted in the computer

  When I insert my memory card from my camera into the player on my computer I used to have a window that pops up asking me what I want to do with my pictures. I don't have this window, infact, nothing happens.

  "Lmbruce" wrote in the new message: * e-mail address is removed from the privacy... *

  When I insert my memory card from my camera into the player on my computer I used to have a window that pops up asking me what I want to do with my pictures. I don't have this window, infact, nothing happens.

  Try www.kellys-korner-xp.com/top10faqs.htm or
  www.Microsoft.com/downloads/en/details.aspx?FamilyID=c680a7b6-e8fa-45C4-A171-1b389cfacdad&displaylang=en

• AutoPlay (I think it's called that) dialog box does not appear when the memory card is inserted into the computer

  When I insert my memory card from my camera into the player on my computer I used to have a window that pops up asking me what I want to do with my pictures. I don't have this window, infact, nothing happens.

  When I insert my memory card from my camera into the player on my computer I used to have a window that pops up asking me what I want to do with my pictures. I don't have this window, infact, nothing happens.

  ========================================
  The following links may be worth a visit:

  AutoPlay (822660), intermittently does not work
  Detect removable media or digital cameras
  http://support.Microsoft.com/?kbid=822660

  Download the Microsoft Autoplay Repair Wizard:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=c680a7b6-e8fa-45C4-A171-1b389cfacdad&displaylang=en

  Goosd chance...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to stop Lightroom starting upwards whenever a USB stick is inserted into the computer?

  Hello world. I'm on windows 7 and I just started using lightroom 5. It's amazing! However a problem is that I have to stick to a USB in my computer and lightroom starts (when I'm not to use it or work in it). I'm constantly inserting and removing pen drives, so it gets a little irritating. Can I stop him doing that somehow?

  All the best

  Kevin

  In Lightroom, Edit > Preferences > general tab > uncheck the option "see the import dialog when a memory card is detected."

  If it does not, go to control panel > Autoplay and change the option for "Images" and "Mixed content" of "non-action".

• El Capitan: macbook pro encryption self started after the update to iTunes on 11/12/16.  After restarting the computer open to grey screen asking if I wanted to use ICloud password or logon password updated.  I don't want / need for encryption I do?

  After update iTunes on 11/12/16 my computer restarted "grey screen" and required a password for encryption.  He encrypted then my MacBook Pro (10.11.2) in addition, the iTunes update has 'lost' My Playlists, and 90% of my purchases.  Apple Care level 2 could not find them!  They appear in my account, but not in my iTunes.

  1 can I fully encrypted computer?  Otherwise how can I UN-encrypt?

  2. How can I get my old, entirely organized iTunes back?

  Thank you

  File Vault encryption is a security feature. Olny you know if you want or need it. I don't use it.

  To remove the see of

  Use FileVault to encrypt the boot on your Mac - Apple Support disk

  You can re-download most of iTunes purchases by:

  Download after purchase from the App Store and iTunes Store iBookstore

  It appears that there is a problem. This happens a few times. If you have a backup yo can restore from the backup

• Whenever I turn on the computer, open only in Safe Mode, when you attempt to open in Normal mode is never opens.

  We had bad storms, blinking power and computer when outside on / off. When I rebooted, it will only restart in the safe - in the PAST, we had errors and disk errors when the update to the Service Pak3 who ended up being fixed.

  Hi zpolgar,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-XP-will-only-boot-in-safe-mode-after/5f2af265-a8d9-4712-8CF1-d56c1ede17d5?page=1

  I hope this helps!

• Oleaut32.dll seems to be on the computer but the 3rd party install can't find it

  A brief history. I got the Itunes error for months. I lived with him (after failed it several attempts at correction). To do this, I'll post the following event log error. Now I am trying to install software for a video camera and it can not find the file oleaut32.dll (this time in the System32 directory). I bought and run the RegServe software to solve registry problems (which was supposed to go to fix this). Now, I'm getting several other errors in the event log (unrelated to the errors of the oleaut32.dll file) after the execution of this software. I tried to repair Itunes after the register of difficulty in case he had to just update its links. No luck. No luck on installing the camera software. I installed optional updates from Microsoft incase they might also need this dll file and therefore would set the record link. No luck. (but no installation failure).

  Here is the series of errors in the log of events from when I tried to fix itunes:

  Application MsiExec.exe, version 4.5.6002.18005, time stamp 0x49e01c42, module OLEAUT32.dll, version 6.0.6002.18005, time stamp 0x49e037da, exception code 0xc0000006, offset error 0x0006c7e7, 0x9f4, failed failed application start 0x01cae48391384bf1 process id.

  ***

  Windows cannot access the file C:\Windows\SysWOW64\oleaut32.dll to one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing. Windows has closed the installer program for Windows® because of this error.

  : Program Windows® installation

  File: C:\Windows\SysWOW64\oleaut32.dll

  The error value is listed in the additional data section.

  User action

  1. open the file again. This could be a temporary problem that can be corrected when the program runs again.

  2. If the file is still not accessible and

  -C' is on the network, your network administrator must verify that there is not a problem with the network and that the server can be contacted.

  -C' is on a removable disk, for example, a floppy disk or a CD-ROM, check that the disc is inserted into the computer.

  3. check and repair file system by running CHKDSK. To run CHKDSK, click Start, run, type CMD and then click OK. At the command prompt, type CHKDSK /F and then press ENTER.

  4. If the problem persists, restore the file from a backup copy.

  5 determine whether other files on the same drive can be opened. If this is not the case, the disc could be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for assistance.

  Additional data

  Error value: C000009C

  Disc type: 3

  ***

  Fault bucket 5215083, type 5

  Name of the event: InPageCoFire

  Answer: no

  Cabin ID: 0

  Signature of the problem:

  P1: c000009c

  P2: 00000003

  P3: oleaut32.dll

  P4:

  P5:

  P6:

  P7:

  P8:

  P9:

  P10:

  Attached files:

  C:\Users\Terri\AppData\Local\Temp\WERBE9D.tmp.version.txt

  These files are available here:

  C:\Users\Terri\AppData\Local\Microsoft\Windows\WER\ReportArchive\Report0fc92a4a

  I'm not terribly computer literate, but I can not follow :) if someone could help me please. We just got back from holiday and have lots of pictures on this camera, that we want to download. I think that if I can fix it a mistake oleaut32 that it will solve all? Oh, I tried the chkdsk command and it will not work up to what my next reboot because the disc is in use... and I do not search the forums for all notes with this file name, but was the only one with windows update issues and I was afraid to try because my updates were actually on the job so far.

  Terri

  Update: now IE is the error and hanging (attempt to close):

  Failed application iexplore.exe, version 8.0.6001.18904, time stamp 0x4b835fec, failed module OLEAUT32.dll, version 6.0.6002.18005

  error trying to install the camera software:

  Application Setup.exe_InstallShield (R), version 6.31.100.1190, time stamp 0x3b95f860, module OLEAUT32.dll, version 6.0.6002.18005, time stamp 0x49e037da, exception code 0xc0000006, offset error 0x0006f828, 0xee4, failed failed application start 0x01cae4c22a7ac136 process id.

  When I tried to run chkdsk on reboot, it continues to give me the message of direct access is not make the record (or something of the sort) and then abandons the chkdsk

  seems to be fixed by a sfc/scannow (who said that he could not address all the wrong file)...

• Start the computer to a temporary user profile

  Original title: computer start in temporary files

  Trying to create another user account, in a way I think that file/s have been corrupt.  Now, the computer opens using temporary files and not as owner as a user.  Any ideas how to put this right?

  Hello

  If I understand correctly you have corruption of user profile on your computer, and this problem has been noticed to the creation of a new user account. Is this correct?

  Please provide information for a better understanding of the issue.

  1. are you able to boot to the desktop / your user account?

  2. What is the exact error message / code?

  3 what to you say that the computer starts in the temporary files?

  Please elaborate on the issue.

  Please post the requested information for a better understanding and to receive specific troubleshooting steps.

  Also see the following KB articles to help solve the problem.

  If you are able to boot to your desktop, and then follow the troubleshooting steps below. If you are facing publishes try it from Windows Xp in Safe Mode , and then continue troubleshooting.

  1. How to recover damaged Windows XP user profile

  2 How to copy data from a user profile damaged to a new profile in Windows XP

  Hope this helps

• When a pop-up message indicates that a storage device has just been attached and I don't put a USB storage device into the computer at all, what that means?

  From time to time, (isn't that every now and then, not every day or every week) a message appears on the computer screen to notify that "a storage device has been attached... and something or other on a port '-as it would if a new hardware device had just been installed or removed... only, I have not attached at a storage device.

  In fact, apart from the scanner, printer and keyboard connected, which are already inserted until the computer is turned on, no USB storage device or any other thing seized or inserted into the computer when this message is displayed on the lower right screen where the icons on the desktop are,

  Why would this happen unless I had personally inserted/joint a USB stick storage device myself in my computer?

  I'm afraid that maybe someone to access details and store information from a remote location via a storage device? Is this possible?

  And if it's an error of some sort, how to fix this problem?

  Please notify. Thank you.

  This probably means you have a bad USB connection somewhere.  I got this a lot when I used markets good USB hubs.  It also happened a lot on a couple of the USB plugs on my old laptop 4 year, where I had plugged in and out things in them so that the connectors are not as strong as they were when new.  My main office more connected devices above that outputs 4 USB, that I had on the back, so I finally bought a card extension to add 4 more exits USB.  If this is your case, perhaps you could do the same.  Expansion cards are not very expensive, usually in the range of $ 15 to $ 25, and they are fairly simple to install.

  I hope this helps.  Good luck.

• Volume of the computer

  Last week my computer no sound. I went into the Control Panel, checked mixer, everything seems fine. I am not all that computer savy so don't know what to do next. Thank you

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  When windows has reloaded, use the Recovery Manager to reinstall your original IDT HD Audio driver as it is stated in the document at the link below.

  Recovery Manager - Windows 8.

  Kind regards

  DP - K