cDAQ-9174 WinXP hotfix usb

Similar Questions

• Download a cDAQ-9174?

  Hi newbie here. Just bought a cDaq-9174 equipped with a card of entry and exit. I'm a little excited to try the new unit out, but I can't seem to figure out how to download anything for her. I just want to try to shoot an entry and see an exit lights. MAX found the controller software and maps. I have labview and I created a small VI which works, but after that I have run out of knowledge. Can't find something on the compilation or download. Any help would be greatly appreiciated. Yes I know the cart before the horse type stuff, but what can I say its new.

  kmay, CompactDAQ is as measure USB Board. It contains no embedded CPU, you would be able to program. Therefore, all the code you generate in LabVIEW will run on the local computer. To try some measure, use DAQ Assistant to paletter DAQmx LabVIEW or examples of example Finder (help-> find examples).

  But as I said, the code runs on the local PC and therefore not of compilation and download is necessary.

  Kind regards

  s9ali

• Reset hardware cDAQ 9174

  I test station with two cDAQ 9174. We work without problem. But the second after a time more long every day, using problem. The second is not recognized by the MAX of NOR. When I connect it to the USB port, nothing will happen. No new hardware found... No refreshing of the hardware in the Windows Device Manager list... Nothing. :-(cDAQ power led lights, but no led lights the LOAN.

  It seems to be that the cDAQ is broken. Is no way to reset the cDAQ 9174?

  Thank you very much for your answers.

  I'm sorry to hear that this might be the case.

  Here is information on how you can begin the RMA process:

  https://www.NI.com/services/warranty_repair_policies.htm

  See you soon!

• OR unrecognized cDAQ-9174

  Hello, I'm not sure if it's good advice, but here goes.

  I have a USB OR cDAQ-9174, I try to use with LabVIEW 2009 and DAQmx 9.1. After you install LabVIEW 2009, I thought he had DAQmx and device drivers installed with it, so I plugged in the cDAQ. Then I realized my mistake and installed the disc that came with the cDAQ DAQmx.

  Unfourtunatly, the device is not recognized by SignalExpress or MAX. She appears in the Manager of Windows devices like "cDaq-9174" under the heading "National Instruments Device", but the monitor of devices OR never detected the device.

  I uninstalled then plugged DAQmx cDAQ without success, then uninstalled the driver from Device Manager and uninstalled DAQmx new and trendy cDAQ, same case. I'm now uninstall all software from National Instruments to try to solve this problem, if it doesn't work I have really no idea what to do.

  If someone could help, it would be great. I'm working on a HP desktop computer.

  Luke,

  If you get this message in time, hold off the coast on the Windows reinstall, there's another step I want you try if possible.  Follow the steps in this KB (completely delete the data folder in step 7): what is the process to remove MAX Database Corruption?

  I hope that this will be a less painful way to address the issue.

• First it is possible to connect a cDAQ-9174 with a NI TPC-2206 or the NI TPC-2212?

  Hello

  First it is possible to connect a USB CompactDAQ (cDAQ-9174) in a port USB of the TPC-2206 or TPC-2212? ¿Did you try someone before?

  Thank you.

  Hello

  It is possible, Windows XP Embedded provides users the ability to develop on a desktop PC and quickly deploy to an embedded target. With NEITHER-DAQmx on Windows XP Embedded, developers will have access to common programming languages such as C++ and .NET.

  follow the link corresponding to your request: http://www.ni.com/white-paper/7757/en

  Best regards

• cDAQ-9174 does not work in the Bay area

  Hello

  I have a strange problem. We use a cDAQ 9174 to collect data of voltage. It works very well when we use it in our lab in San Clemente, California. However, when we bring this same cDAQ North to our laboratory in the Bay area, it is no longer connects with the laptop. We plug it in the same way, but the computer does not detect the cDAQ while Northern California laboratory. While at San Francisco International Airport, I even tried to plug the cDAQ to my computer while waiting for my flight, and is not connected with the computer then.

  But when we arrived in San Clemente, California and tried the cDAQ overnight, he connected and communicates very well with the computer.

  It is with the same laptop, cDAQ and power cables and usb. The only thing that has changed is the location. We brought this cDAQ North 3 times and each time it never works in the North, but the day after return to the South in San Clemente, the cDAQ works.

  Can someone explain what is happening? It is difficult to solve the problems because right now the cDAQ works very well even though we are in San Clemente.

  Thank you

  OK, I think I understand why he did not.

  I plugged the DAQ today and noticed that I had some ths same problems as before, he did not communicate with my laptop. Labview programs designed to ensure that it did not. I remember talking to a representative of Labview by telephone and he said that sometimes turns off background services. I went looking and found a service called 'NOR device Loader' was arrested. The executable is called nipalsm.exe.

  I restarted the service and reconnected in my DAQ and it still worked!

  I believe that through this service is stopped, the computer does not load the drivers for data acquisition, so that won't work.

  I was able to reproduce the problem by stopping the service and trying to launch my labview programs, meeting the same mistakes that I've had in Norcal. And I solved the problem by restarting the service.

  We had tried to restart your computer to solve the problem, but I guess that this service is not starting sometimes when the computer restarts.

• How to speed up loop DAQ triggered using NOR cDAQ-9174 with NOR-9215 and NOR-9402

  Hello

  I use LV2010 and NOR-DAQmx 9.2.2. I have a NOR cDAQ-9174 with a NEITHER-9215 4 channel 100 k simultaneous ADC and NOR-9402 4 channel DIO module trigger and reset.

  We run WinXP sp3 on a Dell M4400 core 2 duo @2. 26 Ghz.

  I used the code example NI DAQmx for acquisition of tension with trigger HW. My goal is to try all 4 channels on the 9215 simultaneously when a trigger is received on channel 0 of the 9402, after data is read, I use channel 1 on the 9402 to reset the trigger of the target material.  I have a version of this work, however the maximum event rate is ~ 16/second. I have the Setup 9215 for finite samples / 10 samples per channel which is ~ 400uSec of conversion time and I realize he is above in the appeal of vi, but ~ 50mSeconds worth?

  The target detector can put out up to 1 k / event triggers / seconds.  Only, I received a rate of 8 per second and I added the NOR-DAQmx control vi driver and chose "commit" this did double the rate.

  My question is what is the maximum rate of loop for these devices (trigger/conversion/reading device / reset) and start over? I noticed that just let free the 9215, carried out using the 'Acq & chart internal strain Clk' raised only the rate of events up to 20 Hz.

  Thank you

  normbo663

  Hi normbo663,

  You can get this works far better assuming you have an available counter (there are 4 on the backplane of the 9174).

  DAQ Compact supports the tasks of meter output "redeclenchables" that can be used to generate a finite pulse train.  You can set a task of finished meter redeclenchables output to be used as sample for your task of analog clock.  The task of the meter output will be re-Army (less than 12, 5-25 ns) as soon as it's finished out the last pulse.  The task of analog input would be configured to run continuously, but it would only sample based on the output of the meter triggered.  For an example, see here.

  You can reference the internal counters on the cDAQ without signals through a routing module using: cDAQ1/_ctr0 (right click on the chain counter control, then select i/o name of filtering and check channels internal to add these options to the drop down).

  Thus, with the tips above, you should be able to immediately re - arming your analog acquisition on the 9215 using one background basket counters.  It seems that the second half of the application is to use a second channel on the 9402 to reset the trigger of your DUT.  You can deterministically generate this signal so by configuring a 2nd redeclenchables meter out task (single pulse, but this time).  All you need to do is the initial delay on the appropriate value for your analog acquisition.  Trigger this counter on the same PFI line that trigger you your analog task from.

  Using counters to generate the signals you need in a deterministic way, the loop becomes is no longer a problem (as long as your input buffer does not overflow).  You may need to re-read several triggers at the same time for the loop to keep (for example to read 1000 samples each, which would correspond to 100 triggers 10 samples).

  Best regards

• Difference between the cDAQ-9174 and cDAQ-9178

  I have several cRIO-9081.  Each cRIO-9081 running NOR-DAQmx 15.5.  On four of the cRIO-9018 we show you cDAQ - 9178 with 8 modules.  Everything just worked.  On the fifth cRIO-9018, we tried to connect a cDAQ-9174.  The aircraft appeared in the Windows Device Manager and MAX, but MAX has indicated that the aircraft was missing (error-88705) and that Windows can't find a driver for the instrument.

  We then plugged a cDAQ-9178 in the fifth cRIO and everything just worked.

  What is the difference between a cDAQ-9174 and cDAQ-9178 other than the number of the module support?

  Paul

  Hi Paul,.

  It seems it could be a driver problem! What DAQmx version you have installed on two computers? Reinstall the latest version may be worth it because it looks like there may be corruption. You can find the latest version here: http://www.ni.com/download/ni-daqmx-15.5/5901/en/

  You can manually associate the device driver, here: http://digital.ni.com/public.nsf/allkb/5B80CAAA64413B4C86256C5E0000C1A7

  There are modules connected to the cDAQ chassis?

  Also, sometimes, this can happen if you do not restart your computer after the installation of the NOR-DAQmx driver. Restart your computer after the driver installation will allow you to reserve the device successfully. Here are a few others not to try:

  • Check the charger to device OR to see if it is running
  
  
  • Reset the service OR charger
  
  
  • Reset the MAX Configuration database
  
  
  • The system power cycle

• Generate a pulse train, NI 9402 modules in cDAQ-9174 chassis

  I have two modules NI 9402 in a cDAQ-9174 chassis.

  When I output a pulse train on a specific line of the PFI to a specific module, the pulse train is out on the right line of PFI, but on BOTH modules.

  I want that the pulse train out only one of the modules.

  for example, I select cDAQ2Mod1/ctr1 to output a pulse train on PFI3 of module one.  I hear the pulse module one PFI3 train, but I also get it on PFI3 of module 2.

  I am also a measurement of separation of two edges with a different counter, but I don't seem to have this problem.  (The measure only works when I have the signals connected to the module that I've specified.)

  -Paul

  This is the Vi I work with.

  Hmmm...  Looks like it's actually only after I exit a signal on that line.  Maybe I should try to clear the line.

  -Paul

• cDAQ-9174 error-89137

  I have a cDAQ-9174, I want to configure to use and DI, at the same time in two different tasks. It gives me the following-89137 error:

  Possible reasons:

  Specified route can not be satisfied, because it requires resources that are currently in use by another route.

  Source device: cDAQ1
  Terminal: / SampleClock
  Target unit: cDAQ1
  Destination terminal: Slot1/ConvertPulse

  Resources in use by
  Task name: _unnamedTask<32>
  Source device: cDAQ1
  Point source: di/SampleClock
  Target unit: cDAQ1
  Destination terminal: Slot1/ConvertPulse

  Task name: _unnamedTask<33>

  I understand that this is because some courses is in use, but I don't know what that means. I tried to reference the peripheral roads in MAX, but I don't really understand. I have attached my code. You can see that I want to read and write at the same time, which I think should be a fairly simple thing to do. I found a note on the site NOR on the definition of the clocks with the Timekeeping property node. I tried to do, but I couldn't make it work anyway.

  Can someone tell me how I can use DI and PERFORM tasks on the cDAQ even at the same time?

  I figured out that I can not do readings of equipment timed at the same time, I do timed written with this module, so that was the problem.

• synchronization and clock cDAQ-9174

  I have a cDAQ-9174 with chassis

  HAVE - 9205 OR 9205

  HAVE - NOR 9219

  DIO - OR 9401.

  "NOR-DAQmx allows the on-board clock routing synchronize acquisition or generation of data transactions. A single sync signal or a trigger can be shared between multiple operations on the same device to ensure that the data are synchronized. These signals is shared by the simple signals routing functions that allow connections integrated hardware DAQ. " (from http://zone.ni.com/devzone/cda/tut/p/id/6829)

  When I check the itineraries device in MAX tab' for chassis and c modules individually, I found many clocks with the Green blocks (direct Route). "Once a physical connection is determined, the NOR-DAQmx driver lets the user quickly and easily use this connection to synchronize operations".

  Now my question is how do you choose among these clocks available. What is the frequency of these clocks? The highest frequency the better? What is the difference between /Ctr0SampleClock, /Ctr0InternalOutput, /Ctr0Source, /Ctr0A?

  For example, why well/Dev1/I/SampleClock or Ctr0InternalOutput or of others, especially as a source for the .vi DAQmx Timing (sample clock)?

  Thanks a lot for your help

  Bing

  Concerning

  Hello NCLbingji,

  I think you mix instructions from the manuals of different material. The link you posted refers to the synchronization of several separate devices, while your cDAQ with its modules really is like having one device almost. You will find more relevant information in your manual of cDAQ chassis. For multiple devices, you indeed have a "physical connection", but with the cDAQ is not necessary. You set up these connections in the software in any way, and this should get the routing sorting at the driver level.

  Try to identify which channel will be your a 'primary', the one driving all others and synchronization, the value then asked SampleClock of this string as the rest (DAQmx Trigger.vi) trigger ('secondary') channels, then start all 'secondary' jobs and finally start your "primary" task This will trigger all tasks at the same time. Take a look at the attached picture, which is another application that I worked on, but I think this will help.

  I hope this helps.

  Kind regards

  Michael S.
  Technical sales engineer
  NEITHER UK & Ireland

• DASYLab w / support NOR-DAQmx NI 9227, NI 9229 &amp; cDAQ 9174

  I am trying to use DASYLab 11 w / NOR-DAQmx 8.5 to my configuration material of NI 9227, NOR 9229 & cDAQ-9174. After decommissioning of my PC Win7 for XP that takes in charge OR-DAQmx 8.5 (the OR-DAQmx last, supported by 11 DASYLab), I discovered that NEITHER-DAQmx 8.5 does not support the cDAQ 9174. Right now, looks like I'm watered except so use LABView. Is there any other way at this time to use this hardware configuration with DASYLab or any other application?

  DASYLab V11 supports Windows 7 when you install the Service Pack (see www.dasylab.com).

  Where are we going to say that it does support NOR-DAQmx 8.5? I installed the most recent NI.com last week, and it seems to work very well. I use only simulated devices so far, but DASYLab is data collection and display correctly.

• problem installing driver cDAQ 9174

  Hello

  I am a new user of LabVIEW and just got our first shipement material today of 2 x cDaq 9174 with analog i/o.

  I tried to install the driver for several hours without success. At the beginning of the installation, I get an error message that says:

  "This installer needs to access 'My images' However this place XXX is not available." Make sure that this directory exists and is available, and rerun Setup.

  First of all, the folder my pictures pointed to a NAS drive where all of our photos of the company are located (which was the N drive) - so I show it to the location of the normal C drive but it is still giving me an error message and try to find the folder in drive instead of C N (and Yes I tried to reboot).

  Secondly, the location was available, as I opened through Explorer without any problem.

  Thirdly, why a driver would fail to install simply because it could not access the folder my pictures?

  Any help would be appreciated.

  Hi Doug_1970,

  It may be a registry key which is always pointing to the NAS drive. Try to use the following Microsoft Fix it tool, reboot, then install DAQmx.

  http://support.Microsoft.com/kb/886549

• cDAQ-9174 with modules 9225 and 9239 for issue of power measurements...

  Hello to one and all.

  I do turn a cDAQ-9174 with modules 9225 and 9239 to measure the voltage (120, 208-240, 277 VAC) and current (via the clamp amp i400, Fluke - 10mA/exit A) respectively.

  I have the set scale scale Differential No. (1:1 I guess) for 100: 1 for current and voltage.  With the acquisition mode set to "N samples", 10 samples to read, at the rate of 500 m.  This feeds into 'EPM_Power.vi' (polymorphic VI of the palette of EMP... can be downloaded here, http://sine.ni.com/nips/cds/view/p/lang/en/nid/209826)

  I try to check my numbers with an Analyzer of power quality of 435 Fluke and supporting that upward is a Fluke 179 True RMS DMM with clamp amp i200 (for current playback)

  Now, I'm running is my numbers I take data look like they're following a curve of fishing... the averages are on the right, but when my blood pressure is expected to be relatively stable, it's over the map... same story with my current readings.  I tried several different filters without success.  I would like to have relatively stable values for voltage and current so my other values are correct.  Is there a signal conditioner or filter that will help with this?

  As always, a point in the right direction would be greatly appreciated!

  Thank you!

  Chad

  Hi, Will,

  Your request for a screenshot actuall lead me to the solution.  Not enough samples!  I took little data too slowly and only seeing part of the wave of fishing AC each iteration.  .. that became glaring when I tried to this graph.  So I increased my sampling of 100 to 5 Hz and things seem to have settled things down a bit.  Thank you for the good question!

  SH?

  C

• synchronize 2 cDAQ-9215 modules on the cDAQ-9174

  Hello

  We collect 8 channels of the AI of the comments about 32KS/s, but they must be synchronized with precision. We intend to use 2 CDAQ-9215 modules mounted on a CDAQ-9174 chassis.  This system will do the job? And what kind of calendar and clock configuration should I use to improve the precision of the synchronization.

  Thank you.

  Hello

  I'm sorry I didn't know not the 9215 was a simultaneous module.  Instead of the S series card, you should be good to go with a 9174 and 2 9215 modules. If you use the same DAQmx task to run on all 8 channels acquisition they share all the same timing engine and snack at the same time.