problem installing driver cDAQ 9174

Similar Questions

• Problem installing driver sound card on Satellite A30

  Okay basically I have no sound on the laptop and realized that there isn t one driver installed, I went on the Toshiba site and downloaded correct.

  The problem, however, is that the driver won t properly install it comes up with an error saying windows message that "tool for driver update" has encountered a problem and needs to close.
  I assume it is a problem with the installation of the file if someone could help me?

  Realtek ac 97 audio setup (4.92)

  Can you please tell us which model of laptop and operating system do you use?

• HP OfficeJet 4650: Problems installing driver HP OfficeJet 4650

  I can not scan with my printer. I tried to install the driver HP several times. Each time it is said that it has installed successfully.

  When I add the printer to the list on printing & scanning in system preferences, it finds the printer (because it is attached to my computer via a USB cable) but in the ' using Print:' section, automatically selects the generic printer PCL. HP OfficeJet 4650 isn't in the drop-down menu to select in this section. This means that there is a problem with the driver installation?

  I tried to uninstall the software, but I can't uninstall it, suggesting that it has not been correctly installed in the first place.

  What can I do?

  Hey @HPURCELL,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with your machine of Mac OS x 10.7 printing to your 4650 e-all-in-one printer Officejet. What is happening is that the printer drivers have been installed for Mac OS x 10.8 or later. The installation program is running, but the Mac printer does not communicate. To scan, you will need to upgrade to Mac OS x 10.8 or later version.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Problems installing driver with a clean install of Win7 on envy hp 15 t - j100.

  I was able to install Windows 7 Pro USB on my laptop.  The drivers that I downloaded from hp site have errors when I try to install.  Most of them said that the driver was not installed correctly and gives the opportunity to try again or did it install correctly.  I tried to reinstall, reboot, etc.

  One of my biggest problems is that I can't connect to wifi even if I use the recommended drivers.  When I tried the NVidia driver, he did not recognize the card on my device and I cannot adjust the screen resolution.

  Should I have installed the drivers in a specific order?  Thank you!

  That's ok.

  Here is the wireless drivers you need... They are arranged in the same way as other...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24170

  Bluetooth:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24189&lang=eng&ProdId=3714

  ACPI\INT33A0

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127800-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

• problems installing driver for trendnet 648ubm on Windows xp

  I installed the software for this adapter wireless instructions.  But although she is supposed to work with XP, when I try to use the adapter it does not work.  At first my computer has not found the driver (even though it had been installed and the CD is inserted).  I tried to download a new driver from TrendNet, but it's the exact same on my installation CD.

  I moved the adapter to a different USB port and all of a sudden he seemed to start installing the driver, until halfway through the installation I had the BSOD.  It took about 5 tries to restart, and my computer restarts only without the adapter.  As soon as the adapter is inserted into any USB I get the BSOD again.

  I have a wireless printer and that you really want to give my office wireless capabilities.  Does anyone have a solution for this?  Thank you.

  Hello

  I suggest to perform the clean boot and then try to install the drivers.

  Note: Steps to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfig and click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Problem installing driver printer

  Hi Pro,

  Can you help me how to install the driver printer Hp laserjet 1200 by sharing printer from a windows xp sp3 PC, because I have 2 PCs, 1 PC with win xp and aready istalled printer, printing is Ok - and sharing printer for 1 PC with Win Vista sp2.

  But when I use win vista PC connect to PC win xp to install the printer driver, I double click on the printer and install and then error: "the file ' *." ' INF' (unknown) is needed. I have aready downloaed excactly Driver for vista, but can't.

  So pls help me to solve this urgent problem. Thank you very much

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  "Connect to a network, mail and the Internet."

  They will help you with your question in the Vista Networking Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems installing driver HP Photosmart Premium eAll-in-one C310A with LocalSystem registry key

  It is to recommend her file HP for my printer driver based on my scan HP network printer.  There is no sent CD when I bought the printer, that the instructions to download the drivers.

  PS_AIO_05_C309a_Net_Full_Win_enu_140_047.exe

  When reinstalling on my HP laptop with Windows 7, I keep getting the below error.  I have disabled Norton, update Flash, don't know what else to do.  It is not a question of access, because I am the admin for this computer.  Too many hours of research on this issue.  I need help!

  You have administrator access to your windows user account? A suggestion to the user Zaffiri in the next thread that you can try:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/Photostmart-C4400-problem-enum/TD-p/88...

  Just hang on, someone more familiar with the printer can happen.

  Thank you!

  Harry

  Norton support

• Problem installing driver Lexmark x 8300

  I am running windows 7 64 bit system. I have a Lexmark x 8350 all in one printer inkjet attached to my PC everything was fine until when I got an error message saying that the pc and the printer did not communicate a few weeks ago. After having checked the connections, I tried to reinstall the printer and we was told that installation was not possible and got an error message 0 x 00000006.

  Since then, I uninstalled all the software of printer and tried to reinstall. When I do that, I tells me that the printer driver and when Windows searches for a driver, it is impossible to find one that works.

  I went to the site of Lexmark and they inform me that the driver for Windows 7 64-bit is the same as that for windows Vista 64-bit.

  When I try to install this driver installation fails because the Lexmark driver does not install. If I have trouble shoot that Windows searches for a driver, the system tells me the process has failed.

  I tried a such own restart as suggested by the community, but not luck.

  Is it possible that an update of installed Windows 7 recently caused an inconsistency with the Vista driver for the Lexmark 8350?

  Thanks for any help

  Follow the steps below.  If they do not work, please provide the full text of the error message that occurs when you try to install the driver.  See also the following, which strangely resembles your situation, but the fact that you did not mention that your printer is connected on a network--> https://patrickhoban.wordpress.com/2013/10/30/0800-9/

  1. disconnect the printer from the computer (I assume that the printer is connected directly to the computer via a USB cable).

  2. go here--> https://support.microsoft.com/en-us/kb/2793718 and download both of the correction he routines.  In other words, if you are using Internet Explorer, choose 'Save' instead of 'run '.

  3. download a new copy of the driver Vista 64 bit (cjs8300EN.exe).  Temporarily disable your antivirus software before you click on the Download"" button.

  4. After you download the driver file and the two Fix it routines, disconnect your computer from the Internet, then you can let the disabled antivirus.

  5. uninstall all Lexmark software using the control panel > programs and features.

  6. you will probably need to run mode 'Full' set of routine, but be aware that this will delete ALL printers currently installed.  Full Fix mode it basically puts your print environment to the way it was during the installation of the operating system.  You must restart the computer after you run the Full Fixez_ mode the.

  If this Lexmark is your only printer, and then use Full mode repair.  If you have other printers, you can see if the "light Mode" Fi xit has solved the problem, but I suspect it won't.

  7. After executing according to the difficulty of what you have selected and reboot if you have selected the full mode, run the driver installation program.  Connect the printer to the computer when you are prompted during the installation of the driver, or when the installation is complete.

  If you use the light mode set and the driver installation has not been successful, start back at step 5 and secure it using the full mode.

• Problem install driver Hp Laserjet 1200 (for Win 7)

  Colleague in the morning

  I have problem in installing a driver for my printer Hp laserjet 1200

  I recently updated my system to Win 7. My HP laserjet printer driver works but all of a sudden it stopped.

  I re - download hp driver form site "upd-pcl6 - x 32 - 6.0.0.18849.

  He showed that it successfully installed. but gives this error whenever I want to print

  PCL XL error

  Subsystem: KERNEL

  Error: UnsupportedProtocol

  Operator: 0x0

  Position: 0

  Kindly help

  Hi JamiuKeshinro,

  The driver for this device is included in Windows update. Disconnect the connection USB printers

  Delete the printer

  To remove a printer

  Remove the HP UPD driver and driver package

  logo Windows + R key

  type printmanagement.msc

  Remove printer drivers

  Add the printer by using Windows Update

  To add a local printer

• Problem install driver Brother MFC 8300 (using Windows Update)

  I need help for my printer to work with a new installation of Windows 7 Home Premium 64-bit.  I had to reinstall due to a CMOS error, I think it was because of a dead battery.  It could even be something else because I had other problems with this facility (explained below).  In any case, the printer is a former Brother MFC 8300 (he was a workaholic!).  Past times, I have re-installed Windows, there have not been any problems with this printer.  I just install Windows Update driver (the driver is named 'Brother MFC8600/9650 Series' in Device Manager).  But this time the installed "Windows Update" the driver and says that everything is working properly but when I go to "Devices and printers" it does not appear in "Printers and faxes" (as he usually does).  FYI, there is a list for "USB Composite Device" in "Devices" that shows "Brother MFC8600/9650 series" as a scanner.  Don't know what that means.

  I also tried to manually download the driver of 'catalog.update.microsoft.com '.  I downloaded 2 different versions of the driver.  It has a size of 2.0 MB file and the other has a 2.3 MB file size.  I found myself by installing do not either because I didn't know where the appropriate destination location has been using the 'Expand' of the 'Command Prompt' command with "expand -F: * " ."  I think that the file for the "Windows Update" file size is 2.1 MB (my memory is not the biggest however).

  I am running as a "Standard user", but I installed all the drivers of devices as an administrator.  I also noticed a problem with an application that I used before this re - install, "Ultracopier.  On installs previous he has installed fine and he demanded 'Administrator' rights after the start.  But during this installation, it did not work at all and did not 'Administrator' rights after the start.  I also had problems with a 2 to external hard drive related to the permissions and access to certain files and folders.  I don't know if any of this matters but I thought that the more information the better.

  I hope someone can help me with this because I really need this printer to work.

  Hello

  Sorry for the late reply.

  I suggest that you restart the Printer Spooler service and see if that fixes the problem.

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  Please follow the steps below:

  You must be logged on as administrator to perform the following steps:

  1. By clicking the Start button, click Control Panel, open administrative tools. In the search box, type Administrative Tools, and then click Administrative Tools.
  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Right click on the print spooler service, and then click Properties.
  4. Under the tab general , next to Startup type, make sure that Automatic is selected.
  5. If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, please see the link below:

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  If you are still facing problems while using the printer, I suggest to uninstall the driver again and install all the optional updates offered by Windows Update and then install the printer drivers if not included in the optional updates and see if the problem persists.

  To install optional updates, follow the steps below:

  1. Press the Windows key + R
  2. Type wuapp
  3. In the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer
  4. If updates are found, click on view available updates.
  5. Select the optional updates, and then click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Hope this helps, get back to us if you need further assistance for Windows.

• Error 1606.Could access the network location. Problem installing driver scanner.

  I tried to install the drivers for a more BearPaw 2448TA scanner in the edition of Windows 7 Home Premium (64-bit).

  Recently, a message appeared in the center of the Action to say that a new driver of Mustek systems was available, I downloaded and tried to install.

  A messagebox is displayed during the installation with the following message
  "Error 1606.Could not access network location------." and the installation will fail.

  Help would be greatly appreciated.

  Hi HenryGib121,

  Thank you for using the Microsoft Answers forums.
   
  I suggest you to download and install the driver from the link below.
  http://www.mustek.com/Mustek/support.php
   
  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry.

  If the problem persists try the steps and check them off below.

  You can create a system restore before trying the steps below in order to be on the safer side.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

  The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Here are the steps to fix it.
  1. click on start, run, type regedit in the Open box, and then click OK.
  2. look for the following registry key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\
  3 remove the entries that show the path that is listed in the error message.

  If the steps above did not resolve your problem, then you can try to create a new user account and check.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  http://support.Microsoft.com/kb/811151 (this article is for xp, but can also be used for vista and windows 7)

  You can also contact the mustek support team for help.
  http://www.mustek.com.tw/support/
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• Problem installing driver CM1312nfi

  I have an HP CM1312nfi on a wired network.  I can print to the printer very well from a vista computer.  I'm now trying to get a XP machine to print to it.

  XP SP3 machine operation, everything is up-to-date.

  I tried to install from the disc supplied, but got the same problem as described below.

  I went on HP driver download site and got the following for an XP installation file: CM1312-net-express-install-win32-AM-EMEA1.exe.  During the installation, everything seems fine.  I am able to get to the point select the printer to install.  When the installation continues at this stage, I get an error window that says "the system isn't the path specified".  No other information.  The header of the window says:

  "C:\HP_CM1312_Net_Express_Install\setup\hppnet01.exe" - I networkonly - f C:\windows\hppins11.dat-valider ENU...

  The installation rolls back them then I was download the Solution for Installation of HP Windows XP error.  I've been there several times.  Same result.

  Any solution to this?

  OK, got with in-person technical support and they connected to the PC and saw the problem.  They couldn't get the printer setup is complete.  However, during the call, he mentioned that he had to be uninstalled from things to work my old multifunction.  He has deleted some files, however, the problem of installing persisted.  After the call, I did a complete uninstall of all the old multifunction components and reinstalled the HP software.  Installation is finished and it is running on the network!  Even if the call to customer service does not solve it online, he has me looking in the right direction.

  Problem solved.

• HP Photosmart Premium C309: problem installing driver for my printer (HP Photosmart Premium C309) on Windows 8.1 (64-bit)

  Hi I had a problem connecting wireless or Bluetooth.

  I tried to download the latest version of the driver software, but I get the following messages when you click on the installation and Readme file buttons. Can anyone help please.

  

  

  Hi @Lawds1,

  By your post, I see that you are getting the error "the specified file is not found. I'd love to help you.

  Please, try the procedure described in this document to see if it will help to solve this problem.

  HP printers - during the Installation of the printer to the point Windows 8.1, a Message "System cannot find the specified file" is displayed on the computer.

  You may need to perform a clean boot on the computer and turn off the temporary disable the Antivirus software. How to perform a clean boot in Windows. When running the installation right-click on the installation and run as administrator.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If there is anything else I can help you, let me know. Thank you.

• Problems installing driver Deskjet F4400

  I can't have the drivers for the Deskjet F4440 to install. I get a message saying: "error 1310.Error writing to file C:\Program HP Imaging\bin\hpiscncc.dll. "Make sure you have tp access this directory. How can I fix?

  Hi mherrera95,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=al-68493-4&CC=US&DLC=en&LC=en&os=2093&Product=3837411&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=al-68493-4&CC=US&DLC=en&LC=en&os=2093&Product=3837411&sw_lang=

  10. run the download to reinstall the printer

• Problem installing driver (AMD) 8.982.10.8000 graphic VPCCB15FG

  Hello

  I installed windows 8.1 in my laptop sony VPCCB15FG. I had installed the drivers, Graphics Driver (amd) and MRHD Graphics Driver (AMD), but in the Device Manager, it shows AMD instead, it displays an error in the graphics card. So, I tried to install software patches for AMD graphics card. I could not install the update of (AMD) graphics driver version 8.982.10.8000 for Windows 8 upgrade http://www.sony.co.in/support/download/566261/product/vpccb15fg

  It shows size 204 MB but when I download it was the size of the file 183MO.

  It crashes just after extraction error and see the "graphic driver (AMD) has stoped working.

  Help, please

  Thank you

  You can review the Limitations of Windows 8 upgrade for your computer model of the Asia Pacific.  For more assistance,

  We recommend contacting Sony's Support Center in your area at http://www.sony-asia.com/section/support.

  If my post answered your question, please mark it as "accept as a Solution.