CDF in Calc Manager for planning

Similar Questions

• LCM: Basic rules Calc Manager vs planning files

  I need rule of LCM files and see the rules in 2 different locations, Foundation-> Manager of Calc and planning-> rule files. That is the right file where LCM, and what is the difference between them?

  In addition, files that were brought by the spectacle of LCM under planning-> rule files but non Foundation-> Manager of Calc. Why would it be?

  Thank you!

  FA

  To do this, you need to understand the underlying design. Unlike HBR, who acted as the repository of rules in Calc Manager, rules must be deployed at Calc Manager planning. Once the rule is deployed to planning, it (planning) maintain the copy of the rule in its repository. You can continue to make changes to your rules in calc Manager and there is no effect on the rule in planning.

  So for LCM, you will have the rules in 2 places, in Calc Manager (version may differ from what is in the schedule) and also in planning.

  So you can import via LCM planning rules and it will run without calc in Picture Manager. But if you want to change these rules and deploy it to the planning, you must import the rule via lcm in Calc Manager and redeploy to the schedule.

  Sree - mougel

• Security rules in Calc Manager vs EAS

  Maybe I'm missing something, but what happened to the ability to put safety on the rules now that we use Calc Manager for our applications of EPMA? In EAS Business Rules, we could all our privileges assigned to the rule, but now it seems that there is no security. What Miss me? Thank you.

  Push the State for planning, and then set security in planning (Administration > business security rule)

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Run guests from time disabled for stand-alone applications Essbase calc Manager

  Could you let me know if we could assign RTP for a business rule created through the Manager of calculation for Essbase stand-alone application (not activated EMPA)? I created a business rule in calc, Manager of a standalone version of Essbase (essentially copied the contents of a calculation script and saved in a new business rule). The rule completed successfully, however the RTP section is disabled when I tried to create a variable for this rule.

  
  

  

  Attempted to create a global variable, but could not find him under the knot, essbase. This means that by the RTP can be created only for requests that are active-EPMA? We are currently in version 11.1.2.2

  
  

  No, not in 11.1.2.2 you must be on 11.1.2.3 or higher, as says 11.1.2.2 ""execution prompt variables can be used in the planning of business rules. " "

• How to migrate EAS Business Rules for Calc Manager in 11.1.2.1 (without using EPMA)

  Hi all

  for the moment, we are on 11.1.2.1 and one more late upgrade scheduled to 11.1.2.3, use Calc Manager rather than the rules Business (EAS). Therefore, I would like to upgrade to business at Calc Manager rules, but without using EPMA (we would still use the classic Planning Administration). I read several documents and sites, but I was unable to find a way to do... Does anyone have a how or documentation about my problem?

  Thank you very much

  André

  P.S.: Maybe to make it a bit clearer: I won't spend 11.1.2.1 to 11.1.2.2. I would only use Calc Manager instead of business EAS rules 11.1.2.1 and I couldn't find anything that shows how or if it is possible to migrate from the business rules to Calc Manager (without using EPMA).

  You can change the method of calculation of the Manager of Calc application. I replied to your message in the Manager area of Calc.

  Concerning

  Celvin

• Error message 404 in the last Calc Manager and Hyperion Planning Logins

  Hi all
  
  When I tried to log into the Manager of Calc and Hyperion Planning (V.11.1.2.2) through the web URL, I get the 404 Error Messages.
  
  If I can get to Calc Manager via the workspace, but when I tried to access Hyperion Planning its launch an Error Msg: required Hyperion Planning.Application Wizard creating applications Module is not configured.
  
  I don't have the Installation/Configuration error.
  
  Any help on this is appreciated.
  
  
  
  
  Thank you
  Mike.

  OK last time :) will check you the newspapers for example \user_projects\\diagnostics\logs\ check the logs in the directory of services for windows and the startup directory for * nix

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Provisioning users access to planning applications in Calc Manager

  What role Shared Services supply determines whether an end user can see a planning application in Calc Manager? One of my analysts can see one of our three planning applications in Calc Manager. I see all 3 apps in Calc Manager, but I have full administrator rights to all. I opened a SR with Oracle, but they have not yet responded to my question.
  
  Appreciate any comment.
  
  
  -Bob

  Reading of:-http://download.oracle.com/docs/cd/E17236_01/epm.1112/cmgr_admin/ch01s03.html
  It should help you.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• 11.1.2.3.700 Calc manager - cannot open business rules in IE11 but can in Firefox

  Updated 11.1.2.3.500 to 700 for the IE11 support.

  I installed the following hotfixes:

  1 20675028 - SSP

  2 20612400 - workspace

  3 20643564 - hyperion Planning

  4 20929659 - architect EPM (foundation server)

  5 21292109 - Manager of calculation

  6 20768325 - statement and analytical framework

  7. 21240419 - ADF MLR

  I deleted the directory tmp and cache on servers managed and the Planning0 and calcmgr0

  (Oracle\Middleware\user_projects\domains\EPMSystem\servers\CalcMgr0)

  History/cache deleted my Internet Explore.

  When I go to the calculation Manager and try to open any business rule of calculation Manager I receive the following informational message: "Please try to reload the component script again." When you click on 'OK' I do not see any text in the business rule. (See attachment)

  
  I can run the business rules of the application of planning successfully and I can see them under "Shared Services" and import/export business rules.

  Calculation of the Manager process runs on the server, the logs show no errors in the Oracle\Middleware\user_projects\epmsystem1\diagnostics directory

  Tried to search for the message but could not find anything about this message.

  Any suggestions?

  OK, I think I understand what is happening, I noticed a difference between the user interface in your screenshots and it seems that you disabled for calc Manager ADF.

  You will be able to confirm is that you run a report of registry and it will have a BINDOWS_ENABLED = true for the CALC_MANAGER_PRODUCT property

  If I pass the ADF to bindows so I see the same problem, is there a reason you do not run ADF mode?

  See you soon

  John

• 11.1.2.3 Calc Manager does not open

  Hello gurus

  Just finished applying the corrective update to 11.1.2.3 to 11.1.2.1.

  Can connect you to the workspace and has been able to improve the planning of the applications as well.

  However, when I try to open Calc Manager by-> Navigate-> administer-> Manager of Calc, I get the following error message:

  Process default handlerAn error has occurred the result from the process server.
  ---------------------------------------------------------------------------
  URI: http://servername:19000/calcmgr/filterview.GetChildren.do
  
  Description: Syntax error-
  
  < ! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional / / IN" "http://www.w3.org/TR/html4/loose.dtd" > ""
  < head >
  < title > Oracle Enterprise Performance Management System Workspace, Fusion edition < /title >
  < meta http-equiv = "X-UA-Compatible" content = "IE = Edge" >
  
  < / head >
  < frameset style = "border: 0px;" border = "0" frameborder = "0" framespacing = "0" line = "*" >
  
  < framework noresize scrolling = "" onload = "" src="/workspace/index.jsp?framed=true" >
  < / frameset >

  
  

  I checked the logs in the folder "D:\oracle\Middleware\user_projects\domains\EPMSystem\servers\CalcMgr0\logs" and

  
  

  < test "SELECT 1 FROM CALCMGRCONFIG WHERE 1 = 0" set up for pool 'calc_datasource' failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist.

  «. >

  # < 3 March 2015 1:36:05 pm > < Info > < JDBC > < TELEAS121 > < CalcMgr0 > < ExecuteThread [ASSET]: '25' to queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000KjWv6qBEOPCkZCADVr1KxVbb00000O > < 1425407765900 > < BEA-001128 > < connection for pool 'calc_datasource' has been closed >.

  # < 3 March 2015 1:36:05 pm > < Info > < Common > < servername > < CalcMgr0 > < ExecuteThread [ASSET]: '25' to queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000KjWv6qBEOPCkZCADVr1KxVbb00000O > < 1425407765980 > < BEA-000636 > < resource "calc_datasource", "DEFAULT_GROUP_ID" active group Pool >

  
  
  

  Set up EMP Configurator and try to reconfigure just the database to the calc Manager.

  

  Sree-

• During the validation of the rules in the Calc Manager, facing the common error below

  Hi gurus,
  
  
  
  2011-12-20 20:14:14, 808 [ACTIVE] ExecuteThread FATAL: '0' for the queue: com.hyperion.plan 'weblogic.kernel.Default (self-adjusting).
  ning.calcmgr.HspCalcMgr - cannot run validateRule(). Failed to retrieve defined custom functions or macros from of the
  Essbase server. Ensure that Hyperion Essbase is running and the application.

  Yes calc Manager will be more than likely on the application server.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• 11.1.2.1 - calculation Manager - no. planning applications are visible

  Problem: Cannot create a rule calcmgr for newly created EPMA, planning an application.
  Version: Hyperion 11.1.2.1
  Default calculation module is Manager of calculation.
  
  After you create a new demand for labour EPMA (using App Wizard), I launched CalcMgr to create a new rule. My new Plan app (MCBUDD) does not show upward when you are prompted for a planning Application. In system view, no application is visible in the planning. Discount had no effect.
  
  We tried to start slaughter/CalcMgr, but this has no effect.
  Any help would be appreciated.

  This problem is caused in a distributed environment, where the Calc Manager is not a basic EPMA files that are required to view planning applications.

  Use the following steps to resolve this problem:

  1. check if the folder \EPMSystem11R1\common\bpmui-common\11.1.2.0 exist in the server computer where Calc Manager is installed and configured. If the folder does not exist, please copy this folder from the server where the Dimension of EPMA server is installed.

  2. check if the folder \EPMSystem11R1\common\Axis exist in the system where Calc Manager is installed and configured, or copy the same folder on the server where the Dimension EPMA server is installed

  3. restart the service manager of Calc.

  Check "Calc Manager Does not display any planning application (Doc ID 1340404.1)" on my Support of Oracle.

  HTH-
  Jasmine.

• It is advisable to manage the Planning of Essbase studio?

  Hello

  It is advisable to manage the Planning, Essbase studio or planning 11.1.2.4 web UI?

  Now that planning and workspace 11.1.2.4 has the ability to manage and administer the planning, is there a reason to use Essbase Studio?

  I guess some may use Essbase Studio to extract of the report, but is - it useful for something else? Thank you.

  You would use Essbase Studio to manage the planning, it really has nothing to do with the planning and studio for pure Essbase databases.

  If you want to extract in planning, perhaps you should look at FDMEE

  See you soon

  John

• Cannot manage the plan to export it to Adobe PDF format

  I wanted to try to export to PDF Adobe format, I bought 2 September, I remember because the plan may be cancelled within 14 days for a full refund. But since I got it everything said is "you will be able to manage this plan soon" under my plans and products. I waited to see if she was going to change but it never did.

  I probably should be able to handle 3 weeks later?

  Hi ianw70660965,

  Please contact our customer service team at the:

  - Contact customer service

  Sign in using your Adobe ID & click on "still need help? Contact us' button.

  Kind regards

  Nicos

• Is it possible to include a model of calc Manager after an if condition in a rule of calc?

  Hello!

  I'm trying to create a rule that would first check if certain conditions (pitfall) are met.

  If the condition is true then the rule should go and calculate using a model with different parameters PDT.

  If the condition is not met, then something else is made.

  I test this because I should develop the same kind of solution for another case where the model is much more complicated. Basically, the problem is the same.

  Before you run a rule with a model, a condition to be tested and if the value of CAP are models of should not be executed.

  Here's the rule as we see calc (script edit mode) (Version 11.1.2.3) Manager

  ('Work'

  IF ("Volume"->"BegBalance"-> "DriverSelection"->"LOC"->"real"->"No_Product"->"No_Entity" <>6)

  %Template(name:="CMTemplate1",application:="MyApp",Plantype:="plan1",DTPs:=("YearPara":=[[{GV_Year}]],"ScenarioPara":=[["forecast"]],"VersionPara":=[["working"]]))

  %Template(name:="CMTemplate1",application:="MyApp",Plantype:="plan1",DTPs:=("YearPara":=[["FY16"]],"ScenarioPara":=[["budget"]],"VersionPara":=[["working"]]))

  ON THE OTHER

  / * STARTCOMPONENT: FORMULA * /.

  "7654321"-> "BegBalance"->"LOC"->"real"->"No_Product"->"No_Entity" = 6;

  / * ENDCOMPONENT * /.

  ENDIF;

  );

  The explanation of the above rule:

  It should 1st check-if a Show Stopper has to value (6)

  If is not equal to 6, then it is and should be aggregations as expected.

  If the show stopper (can find value 6 to the intersection of the cross-dimension), then it should set 6 to another intersection as a control point.

  The model includes an aggregation that is made for different combinations.

  The model script is the following ([YearPara], [ScenarioPara] and [VersionPara] are promtps of design time that can be set when you use the template in a rule):

  Fix ([YearPara], [ScenarioPara], [VersionPara], "EUR")

  AGG (product, entity);

  endfix

  This rule does not, validate because the Manager of calc seems to find something wrong with the ")" at the end of the if condition. (line 2 to the rule)

  I see the calc Manager displays error messages that aren't the real cause of the problem.

  Is simply because the template has fixes and they occur after the fi condtion test?

  For comparison, I have a separate rule where I have only two lines:

  %Template(name:="CMTemplate1",application:="MyApp",Plantype:="plan1",DTPs:=("YearPara":=[[{GV_Year}]],"ScenarioPara":=[["forecast"]],"VersionPara":=[["working"]]))

  %Template(name:="CMTemplate1",application:="MyApp",Plantype:="plan1",DTPs:=("YearPara":=[["FY16"]],"ScenarioPara":=[["budget"]],"VersionPara":=[["working"]]))

  This rule works without any problem.

  looking forward for your comments

  Kind regards

  user637777

  Hello!

  Had, it works:

  The reason for not working had patches after if test condition:

  Now the rule looks like this: (used a slightly altered version parameterless template)

  ('Work'

  IF ('Volume '->' BegBalance'-> ' DriverSelection '-'LOC'-> 'real'-'No_Product'-'No_Entity' > > > <> 6 ' ")

  %Template(name:="CMTemplate2",application:="MyApp",Plantype:="plan1",DTPs:=("YearPara":=[[{GV_Year}]],"ScenarioPara":=[["forecast"]]))

  %Template(name:="CMTemplate2",application:="MyApp",Plantype:="plan1",DTPs:=("YearPara":=[["FY16"]],"ScenarioPara":=[["budget"]]))

  ON THE OTHER

  / * STARTCOMPONENT:SCRIPT * /.

  "7654321"-> "BegBalance"-> "LOC"-> "'real '->' No_Product-> 'No_Entity' = 6;

  / * ENDCOMPONENT * /.

  ENDIF

  )

  Model is as follows:

  IF (@ISMBR ([ScenarioPara]-> [YearPara]))

  @IDESCENDANTS ("product");

  @IDESCENDANTS ("entity");

  ENDIF

  So resolved for this case...

  But the other cases I have bugs that I can't go around with IF (solution @ISMBR.

  Kind regards

  user637777

• Not finding Designer Variable in the Tools Menu - Calc Manager Hyperion 11.1.2.3.500

  I'm in EMP 11.1.2.3.500

  When I am trying to develop a business rule in the Calc Manager, I could able to create rules and scripts etc. but I see not the tool-> Option Variable that usually opens Variable Designer to create quickly run time variable.

  Please advise if any change of necessary adjustment for the same or is it a bug /patch should be applied.

  Thank you

  KP

  Hi PK,.

  A bit difficult for the first time on 11.1.2.3.500. In the Sub screen shot under system view the second last icon will take you to the designer of the Variable.

  

  Thank you

  Vikram