Celerra + SRM and Replication manager

Similar Questions

• Move cluster configured with replication SRM and Vsphere

  All,

  We go 2 groups in the near future to achieve a geographical distance between the 2 sites.

  A cluster is equipped with VMware 5.0 replication SRM and vSphere and the other cluster running VMware 5.5 and SRM in combination with replication of vSphere.

  What is the best way to move these clusters, I must stop the replication or interrupt the replication process and are these action to perform on SRM or we need to perform any action on the virtual machine itself?

  I read that a stop is setting the State to not configured including destroy all files in the target directory.

  Does anyone have an experience by physically moving a cluster managed by SRM (and replication of vSphere)

  Any help is welcome

  Thank you

  Gerbert Coolen

  Just pause replication before stop you the VR device on the site target/DR. stop vs break with vSphere replication - VMware vSphere Blog - Articles from VMware

• EMC Replication Manager and RDM

  Hi all

  We are reviewing with EMC Replication Manager to plan and create exact replicas of our Exchange Server. Our Exchange Server has two presented RDM (physical compatabilitiy). In our vSphere environment, it is the only host, we are eager to protect in this way. I was curious about do we still need to buy the RM for VMware agents cover a unique virtual machine, or we would be able to use a 'standard' Host which is a solution cheaper signifacantly.

  Thanks in advance,

  -Jason

  Standard host agent then...

  Right... it causes quite the same physical machine.

  André

• vSphere PowerCLI and replication

  Hello

  I ve seen a discussion about this in the forum, though none recently.

  Would it not possible to trigger a failover of PowerCLI?

  My thought is to trigger a script of our UPS in case PowerFailure to stop a virtual machine and it lights on another host in another location. I have only a virtual Center and the two hosts attached to it.

  The script should do the following.

  1. Stop the machine source
     
  2. Activate failover
     
  3. Turn on the destination on the new host machine.
     

  Would this be possible?

  Hello

  The original question was about turn on/off the VM another host on a different location. I guess that there is no storage shared between the two locations. vSphere replication could be used to replicate the VMDK, but yes, there is currently no Automation (unless using the API of SRM and SRM currently requires two vCenter servers - each manage its location).

  Kind regards

  Martin

• SRM and HP EVA 8400/6400 error

  SRM with HP EVA-8400/6400 returns an error when you run a test:

  Error - Failed to create snapshots of the replica devices. SRA command 'testFailoverStart' failed. Unable to create snapshot Action to create a shot Snapshot failed because of an error on the table cannot create snapshots of the replica devices. SRA command 'testFailoverStart' failed. Unable to create snapshot Action to create a shot Snapshot failed because of an error on the table cannot create snapshots of the replica devices. SRA command 'testFailoverStart' failed. Unable to create snapshot Action to create a tour Snapshot failed because of an error on the table.

  Response from HP:

  It seems that EVA communicates very well with the Sra So. now, you need to scan for the SRA in SRM and then try to perform the replication again. If she fails to perform replication with the SRM then you will need to contact the VMware team, because that would be a problem with the SRM and not a problem with the EVA contacting the SRA.

  Not sure what Miss us here. I work with the administrator of storage without result.

  We found the problem, it was because of the permission on the user account for the table. Need to be added to the storage administrators group.

• The SRM-storage replication

  Hello

  I had a question about SRM storage replication

  I have double storage EMC Clarion & VNX on both sites primary & DR

  in the case above how the difference of configuration would be for SRA

  Thank you

  SD

  Yes, SRA can manage several bays.

• Grid Control 11 g includes advanced replication management?

  The system that I administer currently Oracle Enterprise Manager 10g Grid Control to General administration, but he had to keep the old based on java Enterprise Manager to manage advanced replication. (All of the databases is currently Oracle 10 g. We plan to upgrade the databases up to 11g Release 2. The context is a central database with 16 knots that have views materialized update-able over them to subsets of the data.)
  
  I do research moving to Oracle Enterprise Manager 11 g. Manage Advanced Replication? Otherwise, what Oracle tool now provide or support for advanced replication management? The URL of a white or manual book or article would be a great help.

  Clark,

  If you do not find yourself still, Yes, he does. OEMGC can set up and manage advanced replication environments: http://oracle.informatik.haw-hamburg.de/server.111/b28326/repoverview.htm#i13140

  Eric

• Yoga 2 Pro and the management of energy on earn 10. Yellow 'fix' does not.

  After the upgrade to Windows 10 to the color yellow "fix" included in Lenovo Power Manager, does not work.

  With Windows 8.1, I could see the yellow on-screen transition from mustardie to a more pleasant shade when the Manager of energy was loading. With Win 10, that no longer works even though the energy Manager seems to work ok for other functions.

  Is it me or is this a general problem?

  I uninstalled the Intel graphics drivers and energy Manager and reinstalled in that order, and now everything seems ok. Thank you for your help.

• iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?

  iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?

  If you allowed anyone remote access to your computer (and you're talking about a computer since you mentioned iOS which is the OS for iDevices; computers run on Mac OS X), while no one knows what they were able to install. Assume the worst and:

  Notify your credit card company / bank of potential fraud

  Change your bank accounts and report your fly/fraud credit card

  Change all of your passwords

  And, finally, erase your entire hard drive and reinstall the OS from scratch using recovery or your original installation disks.

• I am running XP and I can't use my keyboard and Device Manager is empty.

  I am running XP and I can't use my keyboard and Device Manager is empty. I also have problems with my other computer also running XP and it will only start in safe mode. I tried to restore, and when it restarts it still will not start normally. Help, please

  Hi margaretbrown,

  · What is the number and the model of the computer?

  · Also provide the model number brand of na on the keyboard?

  · What is the service pack installed?

  · Do you remember all the recent changes on the computer before the show?

  Try the steps listed in the link below: No. options appear in the Device Manager list when you open it: http://support.microsoft.com/kb/311504

  And the computer on which you are unable to start up normally, try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx#2

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Driver DVD disappear from 'My computer' and 'Device Manager '.

  Vista HP Portable DVD player continues to disappear from 'My computer' and 'Device Manager '. Already tried Upper/LowerFilters.

  Hi, a few weeks ago, the DVD burner in the laptop suddenly disappearedmy computer (Windows Explorer).  The first thing I did was check theDevice Manager to see if the drive was there.  It was not the case.  Restarting the laptop did nothing.  Repeated several times, active Vista updates.  No change.  By checking the net, I tried to delete the Upper/LowerFilters in the registry, download it tool Microsoft fix , delete iTunes, do a system restore, to change all the parameters of thesleep and hibernation off and a few other things.  It appeared for the first time after that:

  1. Do a restore of the system for the first restore point.
  2. Remove the DVD writer.
  3. Restarting the laptop.
  4. Research of new hardware in Device Manager .
  5. Change all parameters of standby and Hibernate off. (I tried this method without this step first, but the drive disappeared after the computer went to sleep and woke up.)  Tried 3 times with the same results).
  6. Closing.
  7. Reinsert the DVD burner.

  On the next reboot, the DVD writer has been recognized and ended up in my computer and Device Manager .  No errors of any kind and no drivers were installed at startup.

  What has happened since then, in the last 4 or 5 days, is randomly disappears from thedesktop .  Usually after a few hours or more.  This time, however, it usually appears inDevice Manager after a search of new material.  No reboot required.  It will read from a DVD .avi files each time.  It has not been detected byDevice Manager maybe about 2 or 3 times, and after a simple reboot, it will be present inmy computer and Device Manager automatically after a reboot.  I read that the superior/UpperFilter mark has worked for many people, but for some, the problem returns.  In addition, many of the discussions on this question and proofreading are years.  It happened about 10 days ago.  Within 2 days before the problem appeared first, it was an update of windows, but also an update of iTunes.

  I noticed that I received this error when opening iTunes:

  "The registry settings used by the iTunes for importing and burning CDs and DVDs are missing. This can occur as a result of installing other CD burning software. Please reinstall iTunes. ''

  I have not reinstalled, no DVD player.  Uninstalled itunes again.  Since I finally got the drive to appear (using the method I described above), I did bother to reinstall iTunes because I particularly need it on this computer, worried that it may be the cause of the original problem and I wanted to see if the disc disappears again.  I did do it, however, let QuickTime installed.  Don't know if this could be a problem?

  I stumbled upon this suggestion, but I also had the same question as the next post, and I have not seen a response.  I don't know if or how I should try:

  Nikki,

  You can not go back if the restore points aren't there. Try to reinstall the IDE driver.

  To do:
  -Click on the round to start and right click on computer
  -Left click on properties, this will open the system window
  -Click on device high Managerin left
  -Click on continue if prompted by UAC
  -Goto the 'IDE ATA/ATAPI controllers' you should right click on uninstall and restart

  BTW that dog rox in this avitar

  See you soon! MCP. MCDST. LVL 80

  Hi, thanks for the comment on my puppy. She is now 5 MB and her name is Nikki, lol.

  Well, I tried what you said, but the IDE ATA/ATAP controllers has a (+), so when I select it does give me not an option to uninstall. It is for me (analysis of the physical changes (or) properties).       and if I click on the (+) sign I have 4 different options. 2 channels IDE, Intel (R) 82801 HEM / HBM SATA AHCI controller and Intel(r) ICH8M Ultra ATA Storage controllers - 2850.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/e3701d75-9dbe-4ae9-9d70-83f14129247c?Prof=required

  What I see in "Device Manager", under IDE ATA/ATAP controllers is:

  IDE channel (x 4)

  Ricoh Memory Stick Controller

  Ricoh SD/MMC Host Controller

  Ricoh xD-Picture Card Controller

  Controller of PCI standard IDE dual channel (x 2)

  The laptop is about 2 years and never had problems.  The DVD burner is hardly used to burn, maybe a total of 5 disks in this time.  It has been used occasionally to read or copy from, but not much.  I'm not convinced that he is dead, as I had 2 die on me in desktop computers, after burning hundreds of CDs in them and read much.

  in any case, I was not able to find any bugs or suggestions (with the exception of 'replace' the reader), so I just wanted to describe my specific situation and see if anyone could help out.  Forgive me for information, I have left out, but I am an amateur when it comes to the problems with the computer and still don't know what mean things or where I can get information on my OS, software or hardware.  All anyone can do would be greatly appreciated.

  This is the information I have:

  HP Pavilion dv6700 Notebook PC

  Optiarc DVD RW AD-7560 ATA Device

  Vista Home Premium

  Service Pack 2

  Thanks again for any help.

  Hello
   
  1. do you have the software installed on the computer of CD/DVD burning?
   
  Check if the CD/DVD drive is recognized in the BIOS (Basic Input/Output System).
  Check ' BIOS: frequently asked questions ": http://windows.microsoft.com/en-US/windows-vista/BIOS-frequently-asked-questions
  Step 1: We also recommend to uninstall the CD/DVD burning software, if you have everything installed, restart the computer and check the result.
  Scan for the device in Device Manager. To do this, try the following steps.
  1. click on start, type devmgmt.msc and press to enter.
  2. click on one of the items in the list, click the Action menu and click Scan for hardware changes.
  3. check if the CD/DVD is displayed.
  
  For more assistance on this, contact the manufacturer of the laptop.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Hard drive shows in the Bios and Device Manager but not in disk management.

  I recently had a hard drive fail because of the excessive heat in the computer case (he also took a memory too). When I plug the drive as a secondary drive in any computer it will appear in the Bios and the Manager of devices, but not in disk management, nor can it be considered be as ZAR and Spinrite disk utility.

  The disc spins up and down when turned on and seems to work. Just trying to recover data from the disk, so I can put it on a new drive.

  Any ideas?

  If its not shown in disk management I would use this bootable HD to the utility check disk (probably all riders is set correctly?)

• I need activate vista windows aero but disable them deleted on my computer and Desktop Manager on my own :(

  I need activate vista windows aero them but them deleted on my computer and Desktop Manager disable on mine :(

  Please see the following article with a Mr. fixit and other solutions for a missing aero theme:http://support.microsoft.com/kb/945000.

  This is an art. that addresses both the disabled and disabled aero Desktop Manager problem and a possible solution:http://support.microsoft.com/kb/934561.

  Here is another article on troubleshooting problems with Aero and Desktop Manager:http://www.mydigitallife.info/2006/12/17/get-and-enable-windows-vista-aero-glass-transparency-effect-and-desktop-windows-manager-dwm/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• cannot get rid of the "removable disk" in "my computer" and "Device Manager", after incorrectly removing a USB flash drive

  I stupidly, twice - after using USB flash drives - just shot when he in fact without removing them properly. Now, they are listed at all times in my 'Device Manager' and in 'my computer '. I went into Device Manager and tried to uninstall them. It seemed to work but the next time I booted up Vista found drivers and now they are back in 'my computer' and Device Manager. This does not seem to be a problem, but I would like to get rid of them.
  Joe

  Hi JoeZZ,

  Please see the following instructions on how to see the ghost devices:

  http://support.Microsoft.com/kb/315539/en-us?p=1

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• What is the date of GA of Foglight for Enterprise Virtualization v. 7.0 and Storage Manager 3.0

  Hello

  I was wondering what should Foglight for Enterprise Virtualization v. 7.0 and Storage Manager 3.0 available for download

  Thank you

  Eli

  Foglight for virtualization 7.0 is now available on Supportlink here. Storage Management 3.0 is available here.