Cellular data network 5 s could not be an activated PDP authentication failure

Similar Questions

• Error message @ boot Win 7 Pro "it was Aproblematique from C:\programdata\ofpviaowu.dat - the specified module could not be found."

  Error message @ boot Win 7 Pro "there was a problem starting C:\programdata\ofpviaowu.dat - the specified module could not be found."

  This error message appears whenever I have start my computer and windows starts (Firefox doesn't start up). 15.01 Firefox work properly otherwise.

  This started after I installed the 15.0.1 patch.

  I uninstalled and reinstalled Firefox but the problem remains. Search Google for "ofpviaowu.dat" came with "2012-08-29 Firefox version 15 startup Crash Report" as the only listing.

  Is this a Firefox problem?

  My system has this file: C:\ProgramData\Mozilla\logs\. I don't think that Firefox or update service should write directly to the root of C:\ProgramData\. It could be a configuration error, or it could be completely different.

  You may be able to remove your boot sequence problem .dat file using Microsoft Autoruns utility: Autoruns for Windows. If you find an entry, can describe you it?

• Windows 7 "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. »

  Get the message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. "I am NOT able to connect to the internet please help. I use Windows 7 OS

  Hi Odile,

  Thanks for posting your question in the Microsoft Community forum.

  It seems that you have a problem with the connection to the Internet and receive the error message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is active and running".

  
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  1. did you of recent changes on the computer before this problem?
  2 do you have wireless or wired Internet connection?
  Method 1:
  We'll first run check network troubleshooting if this can help.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
  Method 3:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
  For more information, please see the link.
  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• ORA-01403: no data found / error line could not.

  Hi all
  I copy a page form another application and I run to the demand for labour.
  I got following error:
  ORA-01403: no data found
  Error line could not.
  
  Any idea,
  
  Thank you
  NY

  Ok

  Andy

• could not activate iphone activation server unavailable message 5s

  could not activate iphone activation server unavailable message 5s

  This is a rare event

  Wait a bit and try again or consider the activation via iTunes

  If you can not activate your iPhone - Apple Support

• Windows Mail: Message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing.

  The message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider.

  The rejected e-mail address was * address email is removed from the privacy *'. "Subject 'Welder must build raised bed (Georgetown)', account: 'pop.gmail.com', server: 'smtp.live.com', Protocol: S account: 'pop3', server: 'pop.gmail.com', Protocol: POP3, server response: '-ERR not supported ca5pf6356717vdc.15', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC18MTP, server response: ' 530 5.7.0 must issue a STARTTLS command first ', Port: 587, secure (SSL): no, the message could be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider.

  The rejected e-mail address was * address email is removed from the privacy *'. Object ' Roadtechs.com post: PIPEFITTERS NEED LOUISIANA ', account: 'pop3', server: 'smtp.gmail.com', Protocol: SMTP, server response: 530 5.7.0 must issue a STARTTLS command first. r5sm16402004vdg.17', Port: 587, secure (SSL): no, Server error: 530, error number: 0x800CCC78Server error: 530, error number: 0x800CCC78

  Ensure that the analysis of the electronic mail is disabled (see www.oehelp.com/OETips.aspx#3).  Then delete the account completely and compact and repair the database (see www.oehelp.com/WMUtil/), and then try to add the account back again.  Also check webmail works fine.

  Steve

• Cellular data are on, but does not?

  This problem has been who is rampant in me for these days. So I come home from a study of the year abroad to the Japan, and put a new SIM card in my iPhone 6 when I got home. I saw the bars, and LTE. Data cell was lit, I never turned it off. But every time I want to try to use internet or anything requiring internet, my phone there is no link, and I had to activate cellular data or connect to the Wifi. I went to Verizon, they said, they didn't know what to do. I went to Apple, and they did not either.

  The strange thing is my phone doesn't work if I restore it. If I connect to my computer, ti go iTunes and hit "Restore iPhone" and start over, the internet works. So I backed up my phone before I do, only to find out that if I restore the backup and then my internet stops working again. Now I don't bother me restore my phone. It is updated to 9.3.4, and most of my stuff comes back via iCloud in any case, I'm pretty sure. (Notes, contacts, etc.) Honestly I don't know if it's iCloud because I don't really know what's on my iCloud or how to check, either, but if I restore my phone these things all still return.) The only problem with that is, if I do I lose all my photos. I have about 10,000 photos and videos on my iPhone I need to upload them to Facebook, some I want to keep my phone without worrying. I saved in a file with Capture of Image; I couldn't use iPhoto because she kept finding problems with my photos and refusing to back them up, so it turned out to be useless. I backed up, wiped my phone and put the photos that all back, except that now they are in an album subtitled "on my Mac" and NOT in my Camera Roll. They also not be deleted, and I can't put them all on Facebook; Facebook goes back only to my last 5,000 for a reason, not completely backward through the 10,000. If they are all on my Camera Roll, however, then it will come back completely without problem.

  With respect to the data cell phones/Internet, I tried everything with Verizon and walk in Apple Store. Reset Factory Reset network settings, and restart your phone, put in another new SIM, I don't know what the * happens. I'm not even good with phones or anything Apple related so I was hoping someone here could help me.

  I just need to get 2 things: my photos and my Internet connection. It seems that I can't have one without the other lose. I'm at the end of my absolute roll, and this isn't what I want to spend my time doing when I came right home. I had no such problems at all when I was abroad, they began as soon as I put the new SIM card in, but Verizon and Apple have both claimed that the SIM card is not the problem. I really hope that someone can help me here. I'm looking for a way, if possible, to restore internet on my phone backed up, or a way to restore my film on my phone restored photos, basically. Thank you for reading!

  More than likely, it is possible that the use of the foreign SIM card installed a profile on your device. When you restore the unit to the factory, you delete the profile, but restore your backup restores the profile. Many foreign SIMs for this.

  Go to settings > general and see if there are all the profiles listed. It may also have to with a carrier day missing on the device. With the full backup, you can check in settings > general > about and see what is listed under the carrier. If it is not Verizon, then there is a problem.

• Problem creating ad hoc network-error: Windows could not set up the network.

  Original title: problem creating ad hoc network

  Hello dear,

  When I tried to set up an adhoc network and after entering the name and password of the network. Following up error message pop (Windows could not set up the network).

  I use windows 7.

  P.S. before I used to create the ad hoc network with no problems. But now no more.

  Kind regards

  Ana Paula Yousef

  Hello

   
  Did you change in the computer before this problem?
   
  I suggest to go through these steps and check.
   
  Method 1:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to " http://support.microsoft.com/kb/946481 ".
   
  You can also check:
   
  Set up a computer-to-computer (ad hoc) network.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking.

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• Windows could not start after activating the boot.

  Hi all

  I have a very serious problem.

  A few lost technology from Microsoft asked that I have to do the following:

  http://support.Microsoft.com/kb/929135.

  Immediately after the restart, I was confronted with the following message:

  Windows could not start.

  Status: 0xc000000e

  Info: A required device is not connected or is not accessible.

  Startup Repair does not work. -Root cause found: the partition table has not a Sys component validates.

  System Restore does not work - the system cannot find the specified file (0 x 80070002)

  Bootrec - rebuildbcd works no item was not found.

  Bootcfg does not work - could not open the TRUNK. INI file.

  Bcdedit does not work - the requested system device cannot be found.

  GParted does not work - cannot load the ntfs module: invalid argument.

  How can it be fixed, please?

  It is an extremely urgent situation which must be resolved immediately, because I use this computer for work and need to return to work on a large commercial project Monday. Forget the original question that MS tech was trying to 'help' with, everything what I need now is to be able to get into Windows, or even just make this record available and accessible on the LAN computer.

  Hi all, thank you for the advice.

  Problem has been resolved after a cold start.

• Ideas re: ' Connect-VIServer: could not connect using the requested protocol "failure

  I know, it's a matter of weakness, but I hit the wall on this one. I've even got desperate enough that bouncing private LuD, and I tried everything we discussed, but I'm still @ deadlocked.

  I developed and tested several scripts that I am finally ready to go with Prod.

  I get this error when I am trying to connect to Vcenter server or host of the cmndline of vitoolkit (and obviously in scripts).

  «Connect-VIServer: could not connect using the requested protocol.»

  I'm runing the vitoolkit FROM the server VCenter, so I wouldn't exepct the local to be a problem connection. I expect calls the ESX servers as questions) (we have several firewalls in the game). But even once, on-site I would not expect a problem.

  I checked my ports of VC and even more precisely called listener in the connect command, but it does not help.

  I tried to watch the ports through various lines of command, but I don't see anything.

  Any suggestions?

  Add - confirm: $false and it won't be quick.

  =====

  Carter Shanklin

  Read the PowerCLI Blog
  [Follow me on Twitter |] http://twitter.com/cshanklin]

• Problem of dictation and Siri on cellular data network

  Whenever I have try to use dictation or Siri in 3G or 4 G, on my iPhone 6 using the last iOS 9.3.2,and this does not work, and after a while, Siri informs me it's has problems with the network connection. Navigation works the next second and I had received e-mails while Siri was trying to connect to the Apple servers.

  Of course, everything works fine ofer wifi. I didn't notice this behavior after a certain update, since I have been using Dictation and Siri daily, after the last update. Other services such as FaceTime and iMessages work on cell phone.

  I've already wiped the phone and reinstalled from a backup to iCloud.

  Needless to say, it's very annoying.

  Welcome KSamuel,

  From what I understand, your iPhone works very well except with Siri in 3G or 4G cellular connections. While on these connections, everything else works but Siri. You have erased the iPhone and restore a back up with no results.

  The resources below provide some specific troubleshooting steps for issues with Safari.  I know that you have already tried some of them, but try these steps once more in the order presented.

  Use Siri on your iPhone, iPad or iPod touch

  If the problem persists, restoring the iPhone is a step of great to solve many software issues. This leaves him restore the iPhone again to make sure that the question is not a file that is damaged on the back upward. We will make a new backup of your iPhone and then reinstall it to the factory settings using this article: use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings

  Once done, does not restore the back upwards immediately but set up as new iPhone. Then test Siri. If the problem is resolved, restore back upward and test again. You can restore your back ups using this link: restore your device from an iCloud or backup iTunes let us know how it goes.

  Concerning

• Unable to connect network [11001] error: could not find [localhost:2423]

  Hi all
  
  Unable to connect to Essbase Excel addin.
  
  When I click on sign in in the menu essbase.
  
  I fill the details such as the server name, user name, and password.
  
  It connects and dosent show applications or database.
  
  If I give the name of the server = servername:2423 (as a port not) I receive this error network error [11001]: cannot find [localhost:2423].
  
  I edited the host file also.
  
  I have two instance essbase. We're on the default port and another on no. 2423 port.
  
  Essbase server: 9.3.1
  
  Essbase client: 6.x
  
  Help, please.
  
  Kind regards
  Mink.

  AGENTPORT

  and NODENAME need your server name.

  Published by: RobertR3 on May 8, 2009 14:46

• This add-on could not be downloaded due to connection failure

  I scoured the support forums, but still no solution for this. Can someone show what they did besides the new > string xpinstall active set value true, which was previously posted, it did not work. I'm looking for a way to install themes to my persona. I tried a lot of different things, but so far nothing not working, this also happens on other sites, but my goal is just the setting for personas. I will not use 36 ff because it is very problematic to stay now with 35, have computer windows 7. Any ideas? Going through safe mode, this isn't a solution. Any other idea? Persona is part of the Mozilla schema so it worked and just recently noticed his does not work. I tried to disable adblock and it makes no difference. I have deleted the cookies/history, still NADA.

  Hi dobydoby, it's probably a problem that is caused by the addon "Open Link in New Tab" you have installed. try again after you stop it...
  _{Reference: https://support.mozilla.org/en-US/questions/1048421#answer-694645}

• Why the control panel network connections window does not show my active network connections.

  There is nothing visible in the network connections window. I still have full internet access.

  Hi GarryKerluke,

  1. Did you the latest changes on the computer?
  2. What is the type of internet connection you use?
  3. You have security software installed on the computer?
  4. When was the last time it was working fine?

  See the Microsoft article below and check if it helps.

  How to troubleshoot missing network connections icons in Windows Server 2003 and Windows XP

  http://support.Microsoft.com/kb/825826

• This message could not be sent. The authentication setting are may not be not correct. He said go to "help" click "Troubleshoot windows mail", but I can't find it. Now I find that I can't receive any message.

  It started just two days before, when I tried to email a bow popped up. Some ocured of errors in the processing of the application. See HELP, click "Troubleshoot Windows Mail" I do not see this statement today. Yesterday, I found somehow and make their operating instructions and arrived in the box, I put a check mark in one of the boxes, and now I can't receive my mail. Can you help me a...

  Try to compact and repair the database and see if that helps (see www.oehelp.com/WMUtil/).  And beware of the antivirus software that may interfere with WinMail.  See www.oehelp.com/OETips.aspx#3

  Steve