Similar Questions

• Can I convert a server disk to a virtual machine?

  I have a number of OS X 10.5 servers running on hardware that is incredibly underused.  Since the Fusion 3 supports running OS X Server virtualized, is it possible to convert a live server disk to a virtual machine to the BootCamp to VM? I could run all 5 of my server on a single Xserve systems. I dug around, but everything points to a new facility to achieve this.

  Thank you

  Tim

  Yes, it is possible to convert physical machines to Mac OS X Server VM. I've posted instructions on how to do this in the following thread: Re: Snow Leopard Server VM existing?

  In your case, the only thing that needs to change is the version of the OS - pick instead of 10.6 10.5. I tried this with one of my machines so far, I would be interested to comment on the question of whether instructions to work for you. I'll probably convert this post into a document at some point...

  I also thought the ability to hire only the OS X physical disk partitions without copying the data (like Fusion for Boot Camp). However, Fusion currently only supported the MBR partition tables to access raw partitions, and most Macs are partitioned GPT (or hybrid MBR + TPG). You can try to use Library/Application Support/VMware Fusion/vmware-rawdiskCreator to see if it recognizes the OS X partitions. If so, you should be able to create a virtual disk that references the partitions and boot from it as you would for a machine virtual Boot Camp.

  It is also possible to use a physical disk full (instead of individual partitions), but you would need to have partitions not mounted before using virtual machines that reference the physical disks. If you are interested in, there is a link in this thread as well.

• Roles of server separate from the virtual machine on a server?

  Hello

  I'm currently learning the server admin so please forgive my ignorance.

  I bought a server and got Win Server R2 2012. Im trying to focus by trial and error and so want to install multiple roles - that I know is not recommended because some may conflict or cause additional problems etc etc - I am not in an operational environment, but trying to imitate such.

  I've read elsewhere that you can put different roles of server on the individual virtual machines - say, for example, the print server role is on a VM that is separate to a file server role, and she needs to be restarted or goes down for some reason any you loose a single service.

  My questions are the following:

  Is this possible?

  Is this desirable?

  Whats software is used to implement this if yes?

  Hyper-V can be used?

  Thank you in advance.

  Fethimidou2006.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Error: "VMware Workstation has suspended this virtual machine because the disk on which the virtual machine is stored is almost full."

  I get this error message:

  VMware Workstation has suspended this virtual machine because the disk on which the virtual machine is stored is almost full. To continue, free 1.3 GB of additional disk space.

  I read up on the subject and found that I have to re size a partition. Anyone know what it could be? I can't find anything that looks like it has something to do with VMware. Does anyone know what size and what file system is it?

  My OS:
  Tumbleweed OpenSUSE x 64

  Thanks in advance

  On more creative, my home and root file systems were not extended to my full disk space :^)

• Is it possible to transfer everything to a virtual hard disk that is smaller on a virtual hard disk that is larger in VMWare Workstation, using the same virtual machine?

  Hello

  I was wondering if it is possible to transfer everything to a virtual hard disk that is smaller on a virtual hard disk that is larger in VMWare Workstation, using the same virtual machine? In the affirmative, please could someone advise me on how to do it. Also utility management and disk transfer can be used in virtual machines to do this?

  Thank you very much

  Tim Auluck

  I'm not sure what exactly you are asking. Can you please clarify!

  Basically you can resize a virtual drive or add a second virtual disk to a virtual machine and transfer/copy files. You can also resize the virtual disk using VMware Converter for example.

  André

• VMware HA and recovery of virtual machines (not to restart them)?

  Hello

  I need help clarify something with VMware HA.

  When I do manually our primary ESXI host, the VMs appear and restart on the secondary host.

  Yes virtual machines are restarted automatically, but it does not resume the virtual machine without interruption as DRS and provides that vMotion.

  Is there a way I can configure HA to not restart and resume the virtual machine in place without interruption?  If not, what are my other options I can configure in VMware ESXi do exactly, if any?

  Thank you very much

  Jan

  HA is used in the event of a host failure, so there is no chance to migrate a workload (curriculum vitae) to another host. What you are asking for can be achieved with FT (Fault Tolerance) where a secondary VM is created on a different host and basically synchronized with the primary virtual machine. In case of failure of the primary virtual machine VM school can resume (almost) without interruption.

  André

• VCenter Server installed as a virtual machine within a ESXi servers it manages?

  Hi all.  I'm new in the world of VSphere... still in my evaluation period.

  I have only a single ESXi server running at the moment but plans to add a second later for high availability, vmotion, increase general capacity, etc.  They are / will be ESXi running on the internal storage and the virtual machines running on a shared SAN.

  Today, I installed VCenter Server 4 on a server at bottom of range/Office that I was carrying around running XP Pro x 64.

  As I was installing I read the guide installation and to my surprise, it seems to recommend that I have installed VCenter Server 4 as a virtual machine on my ESXi host.

  Now maybe I just spent too much time setting up my without new Lefthand requiring a 'witness' during the failover of one SAN to another... but I was under the impression that VCenter Server is not designed simply to host configuration, but is also designed to act as a 'witness' or to take account of quorum whenever a failure scenario occurred on one of my ESXi hosts.  I also noticed the VCenter Server features of a port "heartbeat", which I suppose one would use for the ESXi server heartbeat, but perhaps it is used for "connected mode" with other VCenter servers (I was intending to use only one since it is a small scale installation) I also felt that it would be useful enough to restore a damaged or shot ESXi host.

  So my question is, if my ESXi host dies and it is where I have VCenter Server installed, then high availability will be unable to work?  I guess there are going to be other issues with me unable to access VCenter Server while I have an ESXi host shot, too, as a greater difficulty to get the ESXi up?

  Maybe I'm wrong understand the purpose of the VCenter server... maybe it's not something that's necessary for HA, recovery, etc. and acts only as a configuration tool until something is wrong?  Or maybe I misunderstood the installation guide and they recommend only installing VCenter Server on an ESX box... they don't want this ESX box to be part of the group that manages the server?

  Finally, if indeed they recommend I install this on a ESXi host manages... would I ideally be install this for local storage on the server (where I installed ESXi) or on the SAN (where all my other virtual machines are installed)... or is it just personal preference?

  Thank you!!

  When you add hosts an active hemagglutinin vCenter cluster HA agent is installed on it.  This agent is what is actually the HA.  While necessary to add new hosts in a cluster and configure some specific parameters of vCenter vCenter's agents HA are self-sufficient and can handle HA failover so vCenter is offline.

  You must install the vCenter VM on SAN storage, so that he can use the vMotion, sVmotion, DRS, HA, functions etc. that require a SAN.

  -MattG

  If you find this information useful, please give points to "correct" or "useful".

• Unable to start the CD player Win2003 Server / removable on the virtual machine: VMware-8(Host: Win7)

  

  Hello

  I am unable to start Win 2003 Server CD disk / removable on a Virtual Machine (the two VMWare 6 and 8). The snap-snap-in error is attached. I have the right configuration of the BIOS to Boot priority, but is taking the PXE ROM option.

  Please help me.

  Thank you

  Remy

  Hello

  1. it doesn't matter that the 'connected' is checked which is normal. "Connect at power on" is important and must be checked that it is on the screenshot.

  2. now, change the "autodetect" option to point to your 'real' cdrom device (that this laptop has).

  3 If this does not convert your cdrom ISO image 2003 and load through the second option that says "use an iso image.

  4. If this still does not work there is only one possible "your 2003 cdrom is NOT bootable. The fact that it autoruns IN Win7 does not mean that is bootable. You should check by placing it in a different machine of cdrom, restart this computer, bios in order to boot from CDROM/DVD first and see if the change boots. If it does not start even from there then for sure this cd is NOT bootable. So, the important thing is to load the cd on time to start and not inside the operating system to work.

  5. try to download an iso of the trial of the internet windows Server 2003 and use that one to see what is happening.

  6. create a new virtual machine and try here or even better to try another machine with Workstation 8 and see what happens.

  7. it is no coincidence if the CD-ROM drive is not recognized within the virtual machine.

• Help converting a physical server 'live' in a virtual machine VMware VirtualCenter Consolidation 2.5.0

  Hello, I read the manuals and understand the process as much as I have not actually started the consolidation. I have a Compaq ML350 server which has a default of fan cooling and want to make a virtual machine as a starting point. It will be important for the virtual machine to have the same computer name and be a member of our domain. The only question which does not seem to be addressed has to do with the old server. I need to have the available printserver. I know that you cannot have two SID, names of computers or IP addresses on a network domain at the same time. There is an option to change the name of the virtual machine before you start building. It would be wise to use a temporary computer name while doing my first consolidiation/conversion. Once completed, I could stop the printserver, remove the domain, start the virtual machine, rename it, join it to the domain, and then set the IP address to match my old material printserver. I guess correctly? I can't wait to leave the company without a printserver for more than a little bit. I guess additional servers, I wanted to convert should be treated in the same way? If I posted in the wrong place, please accept my apologies. If there is other material that I may have missed that might also be useful, but I have about 4 different PDF so far. Thank you. brand

  I forgot an important step - sorry, you must add the converter

  plugin - in the menu there is a plugins to manage - it's here where you

  can add the client plugin

  Once you do this, you should get this option

  January 28, 2009 at 15:08, 'rsxsr' [email protected]

• Problem with the mouse and the network after the upgrade VMware Tools and hardware to virtual machine

  Hello world...

  I just upgrade my ESX 3.5 servers to vSphere 4.1. All this work is very well with the upgrade right now.

  After that, I tried to mise a niveau of VMware Tools and hardware of VM for my virtual machine and the problems started.

  I tried with two different VM (the two Windows 2003) and the problem appears for the two VM.

  I don't want to test another VM of the different operating system now, I'm afraid to go too far with update of Pentecost the problem I have now.

  I tried two VM to be sure that the problem is not only on a virtual machine.

  First of all, the mouse.

  My mouse has jerky movement. The button works, but sometimes I have to click several times to select what I want.

  I tried to uninstall the mouse in Device Manager and reinstall, but not really Pentecost improvement which (buttons works better, but... not so sure).

  Second problem.

  After you restart the server after VMmware tools and hardware virtual machine, the network link not working anymore.

  When I go to my network card configuration, IP settings are reset in DHCP mode.

  If I go again all my IP settings, Windows says:

  The IP address is hidden from the network and Dial-up connections

  folder because it is not physically in the computer or is a riser

  It does not work. If the same address is assigned to both adapters and

  they become active, only one of them will use this address. This may result

  in the incorrect system configuration. You want to enter a different IP address

  address of this adapter in the list of IP addresses for this card in the list

  Advanced IP address in the dialog box

  If I answer Yes to this, I have to enter a new IP address, and of course, this is not what I want to do.

  If I don't answer, the network working again.

  I think it is a strange message but the work of the vSphere maybe network now.

  Anyone have any idea why my work network and mouse as this upgrade after.

  All other VM that is not upgraded so far works great.

  Thanks in advance...

  (1) make sure that your hardware acceleration is safe enough. I got the upgrade down my hardware acceleration several times already.

  (2) sounds like the new drivers for your NIC cards took over and VMware is basically a new card NETWORK for you. Follow these steps to disable it:

  (a) open a command prompt

  (b) type (without quotes): 'set devmgr_show_nonpresent_devices = 1' and press ENTER.

  (c) type (without the quotes): "start devmgmt.msc"

• Pouvez vCenter DB be on a DB server, which is a virtual machine?

  I've seen a few questions about the database server that hosts the DB for vCenter virtualization.

  Someone at - it examples of real-world it?

  Are there problems that arise when a snapshot is taken of the DB server, because it is a break from things?

  What happens when the host ESX Server DB is on falls down?  If HA comes into play, the vCenter automatically picks up the new location of the DB, or you have to do all the services restart or reconfigure?

  If a virtual server of DB is used, you must disable automatic DRS about it too?  (you must disable for vCenter server if it is a virtual machine)

  Problems with vMotion for the DB server whether it is virtual?

  I can't seem to find anything VMware on it, but I see a lot of discussion in the forums.

  I really wish I had a test at this time environment...

  Any thoughts?

  Thank you!

  Someone at - it examples of real-world it?

  Yes, I have worked with clients who have virtualized their servers DB - but in does not preclude the obligation to provide appropriate backups taken from the DB, since all the VC environment is stored in the database of

  Are there problems that arise when a snapshot is taken of the DB server, because it is a break from things?

  No problem with taking of a snapshot-

  What happens when the host ESX Server DB is on falls down? If HA comes into play, the vCenter automatically picks up the new location of the DB, or you have to do all the services restart or reconfigure?

  If the ESX host server DB will flow will cause service VC down - HA will restart the DB server how you can restart the service of VC-

  If a virtual server of DB is used, you must disable automatic DRS about it too? (you must disable for vCenter server if it is a virtual machine)

  Problems with vMotion for the DB server whether it is virtual?

  There should be no problem DRS activation for Server DB (or VC besides) since vmotion will work-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Block of VMWare workstation to restart the virtual machine

  Hi all...

  I use vmware workstation 9.0.2 on a machine running windows 7 Professional (64 bit) on any domain.

  the problem is that: when I reboot whole VM (windows/linux), vmware stop working a present the home screen (with options F2, F12, ESC)... at this time, all orders (average, suspend, reset) does not work... I need to manually complete the vm procecess - ware.exe, remove *.lck items and restart the physical machine...

  If I stop the virtual machine, all work without problems...

  any ideas?

  Hi riccimaticand welcome to the VMware communities!

  Try disconnecting the virtual CD/DVD drive.  It seems that there are situations in which problems arise to restart a guest, operating system while its virtual optical drive is connected.  The most common cause is using MagicDisc/MagicISO on the host, which is known to cause exactly the problem you describe.

  See you soon,.

  --

  Darius

• How to change the memory allocated for VCenter server, which is a virtual machine

  I'm trying reclassification of 3.5 to Vsphere 4.1 and I improved VCenter first, making it a virtual machine.  However, when I created the server I did not allocate enough memory for it and I'm getting errors.  How can I allocate more memory for the virtual machine while it is stopped?  I can not allocate more memory, except if it is closed, but with it being the VCenter server if I stopped him so that I can access with the Vi client.  Is there a service console command?  I searched for a few hours and found nothing.

  Thank you!!

  Discover what the vCenter ON WHAT VM ESX host is marked (e), connect directly to the ESX host and find the vCenter VM and make the change.

• How can run Vmware worstation 6.5 on Virtual Machine software

  I'm working on ESX 4 (vSphere 4). I want to run VMware software on VM workstation that has been created on vSphere 4 because when I run VMware workstation 6.5 on virtual Mach software the following message is quick

  'This product could not be executed on the virtual machine.

  so please help...

  It is possible, but not supported.  See nested running VMs.

• VMWare became unresponsive with all virtual machines

  I'm running 185404 6.5.3 build on a Vista 64 SP2 host.  I worked in a guest from XP Pro 32, when the client no longer and I had to close VMware via the Task Manager.  After the host reboots, I found that I couldn't run one of my virtual machines.  They are all Windows clients, and they lock up right after that I have pass the logon screen.  I cannot open any programs in the comments or even highlight a desktop with my mouse icon.  VMWare Tools is installed in each guest.  I can't use my mouse outside the guest, even after using the shortcut keys to release the mouse button.  Can I use Alt - Tab to switch from VMWare.  I uninstalled VMWare and re-installed, but the problem persists.  I have not added any software to the guest during the period.  Thank you.

  Glad things are working for you!   What interesting one cause of your problem!  I guess that's a good reason to always configure Guest CDROM to start 'disconnected '.

  It seems that this question is denoted answered, so it seems that we are all together.