CentOS root creds

Anyone know the centOS root creds to the virtual machines in the public catalog?

When you deploy and turn on... the pwd generated automatically will appear in the portal. Click on the virtual machine to open its properties... and look on the right side.

HTH.

Tags: VMware

Similar Questions

  • Server and the agent must be running as root (under centos linux)?

    I have not seen anything in the installation documentation that mentions that it is advisable to run the Actual process and agent as root.  I noticed that, when is not running as root, the agent was unable to analyze certain directories, which seems a bit undesirable.

    My plan was to create a simple script to call HQ - agent.sh power in /etc/init.d (for example) and then use symbolic links to standards in /etc/rc3.d to start and stop the agents and the server automatically.

    Is this normal practice?  A bad idea?

    Thanks for any advice.
    Jay

    As you have noted, there are many parts of the system that require privileges to access and monitor. The simplest solution seems to be to use the root user to run the agent, although more complex solutions using a properly assigned permissions, sudo for specific orders, or him are more synchronized with security best practices. I have personally not yet explored all the possibilities, but know has endeavoured to ensure the process is running as root is not a hard requirement.

    A start/stop script looks like a very good idea. All right, in fact, you should find an example called agent.rc in the hyperic-agent-2.x.x/rcfiles directory. A point of departure in any way.

  • Why does ' t my credit works for a purchase?  He has done many times before...

    Why my credit card does not work for a purchase more. I've used it before and when I try to make a purchase, it tells me that the transaction did not go thru? I tried several times.

    Hello hlsilva,

    Sorry to hear that you can not make a purchase with your Apple ID. Let's see if we can understand what is happening.

    Now, it is difficult to tell what the root cause is on why your card is denied when making a purchase. I suggest you to update your billing information first to ensure that you have up-to-date information on your card. If everything looks good, make sure that you do not have a balance owing on your account. Take a look at the article below to guide you through that unravel.

    Pay an outstanding balance on the iTunes Store
    https://support.Apple.com/en-us/HT203005

    Take care

  • Dell OMSA GUI reference works don't not with 6.4 CentOS 64 bit

    Hello

    I am trying to install the DELL OMSA on my Dell Poweredge 1950 with no luck setting the GUI part on the server, so I can use the link "https://localhost:1311" in all of our business network.

    The problem is that I've done the following to at least be able to use the CLI portion only:

    http://www.md3v.com/install-Dell-OpenManage-on-CentOS-6-4

    It is a very useful script that I found online to allow at least the installation works fine. I can't access the web interface, it continues to tell me Elinks or any external browser "unable to access".

    I also have openssl installed with wget and perl. I don't know what keeps me to get the portion of browser to work. Please help!

    Here are the currently used version of CentOS kernel:

    CentOS 2.6.32 - 358.el6.x86_64

    Thank you.

    Hello

    What version of OMSA are you using? Sometimes the older versions work better on the older hardware. What does

    srvadmin-services.sh status

    show? You may also want to try adding a non-root user to /opt/dell/srvadmin/etc/omarolemap

  • Reference Dell R210 II - update the Firmware on Centos 6

    Hello

    I have several dell servers connecting a mix of OS linux centos 5/6 for windows and xen etc.

    I have run it on every Linux machine to install the dell tools:

    wget - q - O - http://linux.dell.com/repo/hardware/latest/bootstrap.cgi | bash
    yum install srvadmin-all firmware-tools - y
    yum install $(bootstrap_firmware) y
    srvadmin - services.sh status
    / opt/dell/srvadmin/sbin CD.
    update_firmware - Yes

    on centos 5 is very well and on some centos 6 machines too. However, a new server got us set up this week, the following error occurs, I want to know how to solve this problem, so I can perform upgrades in the usual way via command line:

    Root@server[/opt/Dell/srvadmin/sbin]# update_firmware - Yes

    Inventory of the currently running system.

    Search the directory for storage of the available BIOS updates...
    Checking the BIOS - 2.2.3
    Available: dell_dup_componentid_00159 - 2.2.3
    Did not find a new installation package that meets all the checks of the facility.
    Verification of rev NetXtreme II Gigabit Ethernet 20 (em2) - 7.2.20 BCM5716
    Available: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd) - 7.4.8
    Found update: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd) - 7.4.8
    Check the system BIOS to PowerEdge R210 II - 2.2.3
    Did not find a new installation package that meets all the checks of the facility.
    Verification of rev NetXtreme II Gigabit Ethernet 20 (em1) - 7.2.20 BCM5716
    Available: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd) - 7.4.8
    Found update: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd) - 7.4.8

    Found the firmware that needs to be updated.

    Updates running...
    -Installation of pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_... Package installation failed: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd)
    -7.4.8.
    aborting update...

    The command to low-level error message was:

    Unable to parse xml output, bad for the package: pci_firmware (ven_0x14e4_dev_0x163b_subven_0x1028_subdev_0x04dd)
    Root@server[/opt/Dell/srvadmin/sbin]#

    the specification of the server:

    Reference Dell R210 II

    Intel Quad Core 3.2 Ghz
    16 GB of Ram
    CentOS 6.4 x 64
    1 x 256 GB SSD

    ChrisDuk112,

    Could you do me a favor and see if that solves the problem for you.

    the remount mount - o, suid, exec/tmp

    Let me know how it goes.

  • anyone running on CentOS 5 6 WCS?

    I ran into a problem trying to install and run the WCS 6.0.132.0 on a new install of CentOS 5 (2.6.18 - 194.3.1.el5.centos.plus)

    After properly installing WCS by using the option "-DCHECK_OS = false ' I tried to start the service of WCS with the startupscript as root, but got the following error:

    [[email protected]/* */ WCS6.0.132.0]# ./StartWCS
    
    Starting WCS
    
    *********************************
    
    The Server seems to be unavailable. The possible reasons are
    
    1. The server is not running yet.
    
    2. The server is hanging.
    
    3  The server has crashed.
    
    If the server has crashed or is hanging
    
    Please report the issue and follow the instructions to restart it.
    
    1. Run StopWCS to stop all WCS processes.
    
    2. Run StartWCS to start the WCS server.
    
    3. If the server still fails to start, or you still get this
    
       message, then reboot the machine.
    
    *********************************
    
    failed to start WCS on startup Health Monitor
    
    Failed to start WCS.  Check hm_launchout.txt for details.
    
    Log files are located under webnms/logs in the WCS install directory.
    

    [[email protected]/* */ WCS6.0.132.0]# cat webnms/logs/hm_launchout.txt
    
    JAVA_HOME=./../jre
    
    Starting Health Monitor as a primary
    
    Checking for Port 8082 availability... OK
    
    Starting Health Montior Web Server...
    
    Health Monitor Web Server Started.
    
    Starting Health Monitor Server...
    
    Health Monitor Server Started.
    
    [[email protected]/* */ WCS6.0.132.0]#
    

    [[email protected]/* */ logs]# cat launchout.txt
    
    Invalid OS version detected, can not start Xvfb.
    
    JAVA_HOME=./../jre
    
    Checking for Port 21 availability... OK
    
    Checking for Port 8456 availability... OK
    
    Checking for Port 8457 availability... OK
    
    Checking for Port 1299 availability... OK
    
    Checking for local Port 1299 availability... OK
    
    Checking for Port 6789 availability... OK
    
    Checking for local Port 6789 availability... OK
    
    Checking for UDP Port 69 availability... OK
    
    Checking for Port 8005 availability... OK
    
    Checking for UDP Port 162 availability... OK
    
    Checking for Port 8009 availability... OK
    
    Starting RMI registry on port 1299
    
    Registry started.
    
    DB is already started
    
    Starting NMS Server...

    the only mistake I can interpret is the "can not start Xvfb', but my google thing not performance no results for this question, then:

    Anyone here successfully under this configuration?

    Best regards

    -THE

    PS: I realize that this isn't a supported Cisco OS, but I would try it before falling to RHEL

    Editing/etc/redhat-release should allow WCS start.  I run ours on CentOS 5 and I had to make this change.

    Just comment out the line CentOS and add the following Red Hat line.  You will probably need to be root to do this and

    It may require a reboot.  I also after execution of updates to CentOS note that usually back the file changes

    and WCS does not restart.  I keep a copy of the file on the server's desktop, then copy it on after the updates.

    I have not noticed any problems running on CentOS, just thought I'd throw that out there.

    See you soon!

    Eli

    Release of Red Hat Enterprise Linux Server 5 (Tikanga)

    #CentOS version 5.4 (Final)

  • Installation of Oracle Database 11.2.0.3 on Centos 6.4 to AWS

    We have been installing and configuring the oracle database 11.2.0.3 with OIAM 11 GR 1 material for a few years with great success.

    RHEL 5.7
    WLS 10.3.6

    OracleDB 11.2.0.3

    OIAM 11 GR 1 material

    OSH 11.1.1.6

    We have recently decided to move our VMs to EC2 from Amazon using CentOS 6.4 environment.  Our client currently has us using the operating system is a hardened version of the RHEL5.7.  We have installed on CentOS in the past, but not to 6.4.  All prereqs are installed, but we do not seem to get the database to set up completely.  Running in interactive or silent mode makes no difference.

    When running in silent mode, we received the following:

    . / runInstaller-silent - ignoreSysPreReqs responsefile - db_install_w_database.rsp

    From Oracle Universal Installer...

    Check the Temp space: must be greater than 120 MB.   Real 6463 MB passed

    Check the swap space: must be greater than 150 MB.   Real 24999 MB passed

    Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2015-04-13_04-55-50 PM. Please wait...

    You can find the log of this installation session to:

    /opt/oraInventory/logs/installActions2015-04-13_04-55-50PM.log

    Installing Oracle Database 11 g succeeded.

    Please check ' / opt/oraInventory/logs/silentInstall2015-04-13_04-55-50PM.log' for details.

    [WARNING] [INS-32091] Some of the wizards of configuration failed.

    CAUSE: The Software Installation was successful. But some configuration wizards failed were cancelled or ignored.

    ACTION: Check the logs or contact Oracle Support.

    Check the Setup log:

    INFO: Oracle Net Listener startup:

    INFORMATION: The information provided for this listening port is currently in use by other software on this computer.

    INFO: Beginning of earpiece failed.

    NEWS: Check the file path for more details: /opt/oracle/cfgtoollogs/netca/trace_OraDb11g_home1-1504134PM5854.log

    INFO: Oracle Net Services Configuration failed.  The exit code is 1

    Checking the netca journal

    [main] [2015-04-13 16:58:55.132 UTC] NativeSystem.runRemoteExecCmd [CmdToolUtil.doexecute:473] failed. Command = / opt/oracle/product/dbs/srvm/admin/getcrshome arguments = env [] = error null = null

    [main] [2015-04-13 16:58:55.133 UTC] [HAUtils.getHASHome:938]  Could not get at home.

    PRCT-1011: cannot run 'getcrshome '. Error: null

    oracle.cluster.deployment.ClusterwareInfo.getConfiguredCRSHome(ClusterwareInfo.java:483)

    oracle.sysman.assistants.util.hasi.HAUtils.getConfiguredGridHome(HAUtils.java:782)

    oracle.sysman.assistants.util.hasi.HAUtils.getHASHome(HAUtils.java:934)

    oracle.sysman.assistants.util.hasi.HAUtils.getHASHome(HAUtils.java:955)

    oracle.sysman.assistants.util.hasi.HAUtils.isHASConfigured(HAUtils.java:529)

    oracle.net.ca.ConfigureListener.isHASConfigured(ConfigureListener.java:1516)

    oracle.net.ca.ConfigureListener.isHASRunning(ConfigureListener.java:1538)

    oracle.net.ca.ConfigureListener.validateListenerName(ConfigureListener.java:1785)

    oracle.net.ca.ConfigureListener.typicalConfigure(ConfigureListener.java:183)

    oracle.net.ca.SilentConfigure.performSilentConfigure(SilentConfigure.java:185)

    oracle.net.ca.InitialSetup. < init > (NetCA.java:4189)

    oracle.net.ca.NetCA.main (NetCA.java:428)

    [main] [2015-04-13 16:58:55.133 UTC] [HAUtils.isHASConfigured:532]  HA House is null

    [main] [2015-04-13 16:58:55.134 UTC] [ConfigureListener.isHASConfigured:1524]  Is Oracle configured Restart: false

    [main] [2015-04-13 16:58:55.134 UTC] [ConfigureListener.isHASRunning:1553]  Is Oracle Restart running: false

    [main] [2015-04-13 16:58:55.134 UTC] [ConfigureListener.listenerExists:344]  Listener is 'LISTENER' already exists: false

    [main] [2015-04-13 16:58:55.135 UTC] [ConfigureListener.typicalConfigure:215]  Check free beach port: 1521-1540

    [main] [2015-04-13 16:58:55.135 UTC] [ConfigureListener.isPortFree:1080]  Check whether the port 1521 is free on the local computer.

    [main] [2015-04-13 16:58:55.135 UTC] [ConfigureListener.isPortFree:1095]  InetAddress.getByName (127.0.0.1): /127.0.0.1

    [main] [2015-04-13 16:58:55.136 UTC] [ConfigureListener.isPortFree:1097]  The local host IP address: awscentoschrome.amazonaws.com/52.4.205.244

    [main] [2015-04-13 16:58:55.136 UTC] [ConfigureListener.isPortFree:1099]  Local host name: awscentoschrome.amazonaws.com

    [main] [2015-04-13 16:58:55.136 UTC] [ConfigureListener.isPortFree:1115]  IP address: awscentoschrome.amazonaws.com/52.4.205.244, is IPv6 address: false

    [main] [2015-04-13 16:58:55.137 UTC] [ConfigureListener.isPortFree:1118]  IP address: awscentoschrome.amazonaws.com/52.4.205.244 is a link local address: false

    [main] [2015-04-13 16:58:55.137 UTC] [ConfigureListener.isPortFree:1143]  Creating ServerSocket on Port: 1521, IP address: awscentoschrome.amazonaws.com/52.4.205.244

    [main] [2015-04-13 16:58:55.140 UTC] [ConfigureListener.isPortFree:1178] java.net.PlainSocketImpl.socketBind (Native Method)

    java.net.PlainSocketImpl.bind(PlainSocketImpl.java:377)

    java.net.ServerSocket.bind(ServerSocket.java:319)

    java.net.ServerSocket. < init > (ServerSocket.java:185)

    oracle.net.ca.ConfigureListener.isPortFree(ConfigureListener.java:1145)

    oracle.net.ca.ConfigureListener.typicalConfigure(ConfigureListener.java:219)

    oracle.net.ca.SilentConfigure.performSilentConfigure(SilentConfigure.java:185)

    oracle.net.ca.InitialSetup. < init > (NetCA.java:4189)

    oracle.net.ca.NetCA.main (NetCA.java:428)

    [main] [2015-04-13 16:58:55.140 UTC] [ConfigureListener.isPortFree:1191]  Back is free to Port 1521: false

    2 things come to mind with the netca newspaper:

    (1) we use NO HA... it seems that we could ignore that.

    2) 1521 port is NOT in use.  I ran netstat - anpl | grep 1521 in 5 second loop delay when running the installation and it never appeared.



    Does anyone know if there is something different with Centos6.4 or AWS facilities that would cause this?  In addition, the log shows that the installation went well and it was with the configuration.  The spfile does not exist and when root.sh is run after installation, the oratab has no entry ($ORACLE_SID: $ORACLE_HOME: N |) There > does not exist).


    Ideas?

    Found the question in forums of http://stackoverflow.com . We searched before but does not search the correct error. I searched on "information for this listening port is currently in use by other software on this computer." and found a forum thread that we explained our problem.

    We use AWS as our server provider. AWS has 2 IP addresses he uses. We use for PuTTY in and access the server Public and private one located on eth0. Obviously, the private IP address must be in the file/etc/hosts not the public IP address.

    The database installed and is running.

  • VMware Workstation 12.1.1 Pro is unable to install the network grows on CentOS 6.8 host

    Just upgraded my 6.7 CentOS Server (where the VMware Workstation 12.1.1 worked fine) to 6.8.

    After a reboot, VMware has done, it is usual thing where she wanted to reinstall its readers. He doesn't have to install the network component. Here are my logs:

    2016-05-28T18:21:09.477-07:00| vthread-4| I125: Log for VMware Workstation pid=27658 version=12.1.1 build=build-3770994 option=Release
2016-05-28T18:21:09.477-07:00| vthread-4| I125: The process is 64-bit.
2016-05-28T18:21:09.477-07:00| vthread-4| I125: Host codepage=UTF-8 encoding=UTF-8
2016-05-28T18:21:09.477-07:00| vthread-4| I125: Host is Linux 2.6.32-642.el6.x86_64 CentOS release 6.8 (Final)
2016-05-28T18:21:09.476-07:00| vthread-4| I125: DictionaryLoad: Cannot open file "/usr/lib/vmware/settings": No such file or directory.
2016-05-28T18:21:09.476-07:00| vthread-4| I125: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2016-05-28T18:21:09.476-07:00| vthread-4| I125: DictionaryLoad: Cannot open file "/home/sa_schewee/.vmware/config": No such file or directory.
2016-05-28T18:21:09.476-07:00| vthread-4| I125: PREF Optional preferences file not found at /home/sa_schewee/.vmware/config. Using default values.
2016-05-28T18:21:09.501-07:00| vthread-4| W115: Logging to /tmp/vmware-root/vmware-27658.log
2016-05-28T18:21:09.511-07:00| vthread-4| I125: Obtaining info using the running kernel.
2016-05-28T18:21:09.511-07:00| vthread-4| I125: Created new pathsHash.
2016-05-28T18:21:09.511-07:00| vthread-4| I125: Setting header path for 2.6.32-642.el6.x86_64 to "/lib/modules/2.6.32-642.el6.x86_64/build/include".
2016-05-28T18:21:09.511-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.511-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h
2016-05-28T18:21:09.511-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check
2016-05-28T18:21:09.518-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.518-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid.  Whoohoo!
2016-05-28T18:21:09.587-07:00| vthread-4| I125: found symbol version file /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers
2016-05-28T18:21:09.587-07:00| vthread-4| I125: Reading symbol versions from /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers.
2016-05-28T18:21:09.597-07:00| vthread-4| I125: Read 12201 symbol versions
2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vmmon module.
2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vmnet module.
2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vmblock module.
2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vmci module.
2016-05-28T18:21:09.597-07:00| vthread-4| I125: Reading in info for the vsock module.
2016-05-28T18:21:09.597-07:00| vthread-4| I125: Setting vsock to depend on vmci.
2016-05-28T18:21:09.597-07:00| vthread-4| I125: Invoking modinfo on "vmmon".
2016-05-28T18:21:09.600-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 0.
2016-05-28T18:21:09.600-07:00| vthread-4| I125: Invoking modinfo on "vmnet".
2016-05-28T18:21:09.601-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 256.
2016-05-28T18:21:09.601-07:00| vthread-4| I125: Invoking modinfo on "vmblock".
2016-05-28T18:21:09.603-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 0.
2016-05-28T18:21:09.603-07:00| vthread-4| I125: Invoking modinfo on "vmci".
2016-05-28T18:21:09.605-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 0.
2016-05-28T18:21:09.605-07:00| vthread-4| I125: Invoking modinfo on "vsock".
2016-05-28T18:21:09.607-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 0.
2016-05-28T18:21:09.618-07:00| vthread-4| I125: to be installed: vmnet status: 0
2016-05-28T18:21:09.624-07:00| vthread-4| I125: Obtaining info using the running kernel.
2016-05-28T18:21:09.624-07:00| vthread-4| I125: Setting header path for 2.6.32-642.el6.x86_64 to "/lib/modules/2.6.32-642.el6.x86_64/build/include".
2016-05-28T18:21:09.624-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.624-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h
2016-05-28T18:21:09.624-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check
2016-05-28T18:21:09.632-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.632-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid.  Whoohoo!
2016-05-28T18:21:09.701-07:00| vthread-4| I125: found symbol version file /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers
2016-05-28T18:21:09.702-07:00| vthread-4| I125: Reading symbol versions from /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers.
2016-05-28T18:21:09.711-07:00| vthread-4| I125: Read 12201 symbol versions
2016-05-28T18:21:09.711-07:00| vthread-4| I125: Kernel header path retrieved from FileEntry: /lib/modules/2.6.32-642.el6.x86_64/build/include
2016-05-28T18:21:09.711-07:00| vthread-4| I125: Update kernel header path to /lib/modules/2.6.32-642.el6.x86_64/build/include
2016-05-28T18:21:09.711-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.711-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h
2016-05-28T18:21:09.711-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check
2016-05-28T18:21:09.719-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.719-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid.  Whoohoo!
2016-05-28T18:21:09.720-07:00| vthread-4| I125: Found compiler at "/usr/bin/gcc"
2016-05-28T18:21:09.724-07:00| vthread-4| I125: Got gcc version "4.4.7".
2016-05-28T18:21:09.724-07:00| vthread-4| I125: The GCC version matches the kernel GCC minor version like a glove.
2016-05-28T18:21:09.724-07:00| vthread-4| I125: Using user supplied compiler "/usr/bin/gcc".
2016-05-28T18:21:09.727-07:00| vthread-4| I125: Got gcc version "4.4.7".
2016-05-28T18:21:09.727-07:00| vthread-4| I125: The GCC version matches the kernel GCC minor version like a glove.
2016-05-28T18:21:09.729-07:00| vthread-4| I125: Trying to find a suitable PBM set for kernel "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.729-07:00| vthread-4| I125: No matching PBM set was found for kernel "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.729-07:00| vthread-4| I125: The GCC version matches the kernel GCC minor version like a glove.
2016-05-28T18:21:09.729-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.729-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h
2016-05-28T18:21:09.729-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check
2016-05-28T18:21:09.737-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.737-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid.  Whoohoo!
2016-05-28T18:21:09.738-07:00| vthread-4| I125: The GCC version matches the kernel GCC minor version like a glove.
2016-05-28T18:21:09.738-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.738-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h
2016-05-28T18:21:09.738-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check
2016-05-28T18:21:09.746-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.746-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid.  Whoohoo!
2016-05-28T18:21:09.746-07:00| vthread-4| I125: Using temp dir "/tmp".
2016-05-28T18:21:09.747-07:00| vthread-4| I125: Obtaining info using the running kernel.
2016-05-28T18:21:09.747-07:00| vthread-4| I125: Setting header path for 2.6.32-642.el6.x86_64 to "/lib/modules/2.6.32-642.el6.x86_64/build/include".
2016-05-28T18:21:09.747-07:00| vthread-4| I125: Validating path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for kernel release "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.747-07:00| vthread-4| I125: Failed to find /lib/modules/2.6.32-642.el6.x86_64/build/include/generated/utsrelease.h
2016-05-28T18:21:09.747-07:00| vthread-4| I125: using /usr/bin/gcc for preprocess check
2016-05-28T18:21:09.755-07:00| vthread-4| I125: Preprocessed UTS_RELEASE, got value "2.6.32-642.el6.x86_64".
2016-05-28T18:21:09.755-07:00| vthread-4| I125: The header path "/lib/modules/2.6.32-642.el6.x86_64/build/include" for the kernel "2.6.32-642.el6.x86_64" is valid.  Whoohoo!
2016-05-28T18:21:09.825-07:00| vthread-4| I125: found symbol version file /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers
2016-05-28T18:21:09.825-07:00| vthread-4| I125: Reading symbol versions from /lib/modules/2.6.32-642.el6.x86_64/build/Module.symvers.
2016-05-28T18:21:09.834-07:00| vthread-4| I125: Read 12201 symbol versions
2016-05-28T18:21:09.834-07:00| vthread-4| I125: Invoking modinfo on "vmnet".
2016-05-28T18:21:09.836-07:00| vthread-4| I125: "/sbin/modinfo" exited with status 256.
2016-05-28T18:21:10.081-07:00| vthread-4| I125: Setting destination path for vmnet to "/lib/modules/2.6.32-642.el6.x86_64/misc/vmnet.ko".
2016-05-28T18:21:10.081-07:00| vthread-4| I125: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar".
2016-05-28T18:21:10.087-07:00| vthread-4| I125: Successfully extracted the vmnet source.
2016-05-28T18:21:10.087-07:00| vthread-4| I125: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-tH7bci/vmnet-only auto-build HEADER_DIR=/lib/modules/2.6.32-642.el6.x86_64/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2016-05-28T18:21:11.063-07:00| vthread-4| W115: Failed to build vmnet.  Failed to execute the build command.

    Hi, I faced the same problem, and now I have corrected this issue.

    He was vmnet.ko, at least for me.

    Here's how to solve,

    You can find the latest vmnet.ko of /lib/modules/~previous_kernel_version~/misc/vmnet.ko

    Copy vmnet.ko into your current/lib/modules/your_current_version/misc folder.

    And then run vmware, if you fail at the first, please run again.

    If so, you can run vmwre!

    I hope this will help you.

    Good day.

  • Error when you try to run vmplayer 7.1.2 on CentOS 7-"could not open/dev/vmmon: no such file or directory."

    I am looking for working on CentOS 7 vmplayer.  I ran the .bundle as root and then when I try to create a VM it fails on with the error "cannot open/dev/vmmon: no such file or directory."

    CentOS 7 is not supported?

    In my research, I did not see any fix.  I think he just doesn't...

    vmplayer 7.1.2 works for me on CentOS 7.

    The problem was the secure boot must be disabled in the BIOS.

  • Vami centOS-6 problems, 6 x86_64 didn't start the Scheduler Service

    Are other people successfully building CentOS-6 6 x86_64 machines with vmware studio?

    I was finally able to build a device of CentOS x86_64 6.6 in vmware-studio after I added zlib and i686 glibc.

    and now when I start the machine I can't use vamicli for upgrade.

    Can anyone offer suggestions for me so that we can update these devices? -Thank you

    (we currently use CentOS-6, successfully 6 i686)

    I have also attached: /opt/vmware/var/log/vami/vami-sfcb.log

    {noformat}

    example:

    [root@localhost vami] # vamicli version - device

    Internal error.  Please make sure that sfcbd is running.

    [root@localhost ~] #.

    [root@localhost ~] # /etc/init.d/vami-sfcb restart

    Vami-sfcbd stop: [OK]

    From vami sfcbd: / usr/bin/dirname: extra operand '-d.pid'

    Try ' / usr/bin/dirname - help ' for more information.

    [OK]

    Check the status of vami sfcbd: [OK]

    Vami-sfcbd tests: [OK]

    Initialization of vami sfcbd: [OK]

    [root@localhost ~] #.

    [root@localhost ~] # vamicli version - device

    Internal error.  Please make sure that sfcbd is running.

    [root@localhost ~] #.

    [root@localhost ~] #.

    [root@localhost ~] # tail-13 /opt/vmware/var/log/vami/vami-sfcb.log

    22/06/2015-17:32:10 [info] [process id: 2864] number of process sfcbd: 7

    22/06/2015-17:32:10 [info] [process id: 2864] VAMI Scheduler provider is present on the system.

    22/06/2015-17:32:10 [ERROR] [process id: 2864] could not start the Task Scheduler Service. Unknown error.

    22/06/2015-17:32:10 [ERROR] [process id: 2864] Traceback (most recent call changed):

    File "/ opt/vmware/share/vami/vami_sfcb_initialize", line 86, in hand

    rettuple = vami_cim_util.invokeNonStaticMethod ("root/vami ', 'VAMI_SchedulerService', 'StartService'")

    File "/ opt/vmware/share/vami/vami_cim_util.py", line 36, in invokeNonStaticMethod

    insts = cliconn. EnumerateInstanceNames (className)

    File "/ opt/vmware/lib/python/site-packages/pywbem/cim_operations.py", line 382, in EnumerateInstanceNames

    * params)

    File "/ opt/vmware/lib/python/site-packages/pywbem/cim_operations.py", line 219, in imethodcall

    raise CIMError (code, tt [1] ['DESCRIPTION'])

    CIMError: (6, u 'Not found or not loadable Provider')

    {noformat}

    I had to change thnis in my profule build.

    From:

    vadk:SourceDir="[VADK.vadkRoot]/lib/build/include/rpm/".

    TO

    vadk:SourceDir="[VADK.vadkRoot]/lib/build/include/rpm64/".

    I wasn't aware that there are role models for a new 64-bit operating system.

    When I used this, things were better.

    / opt/VMware/etc/Build/templates/RedHat/6/0_x86_64/build_profile. XML

    studiocli - newos - osdesc "CentOS - 6.6 - x86_64"-profile /opt/vmware/etc/build/templates/redhat/6/0_x86_64/build_profile.xml

  • Core upgraded to 4.0 on Centos 7 VMWare Workstation 11 won't build the virtual network device

    As shown in the topic, I have manually compiled kernel 4.0 for my installation of CentOS 7. After the installation of the kernel (in rpm mode, followed the instructions here: How to compile a Kernel - The Way CentOS ) installed all 3 rpm, kernel, kernel-headers and kernel-devel and then tried to start my installation of workstation with it leads to having to re - build the components (as usual)

    It does not, when it came to the compilation of the network management module. See attached log file that it generated.

    I also tried to uninstall, downloaded VMware-Workstation-Full - 11.1.0 - 2496824.x86_64.bundle and re-installed with the same result.

    Any help would be appreciated!

    aaand..., I fixed my only problem!

    Credit:

    https://wiki.archlinux.org/index.php/VMware

    just applied the 3.19 patch and He-voila!

  • CentOS Workstation 11 7 cannot override noop Scheduler

    Hi people:

    I'm using VMware Workstation 11 and created a CentOS 7 virtual minimum installation using the UEFI boot option. The operating system seems to install fine; However, try to change the disk scheduling algorithm for 'noop' did not work and remains the default value of 'deadline '. The problem does not occur when you install the operating system with the BIOS boot option.

    Here's how to reproduce the problem:

    (1) create a new virtual machine using a minimal install of CentOS and check the Boot with EFI instead of the BIOS under settings | Options | Advanced

    (2) install the OS and connect you with the root or an active administrator account.

    (3) open the/etc/default/grub file and add the following line

    GRUB_CMDLINE_LINUX_DEFAULT = "elevator = noop"

    (4) to reconfigure grub with the command

    $ sudo grub2-mkconfig - o /boot/grub2/grub.cfg

    (5) to restart the virtual machine

    (6) connect and check the elevator algorithm parameter using the command

    $ cat/sys/block/sda/queue/scheduler

    The output is ' cfq noop [deadline] "where it should be" [noop] deadline qfc. I manually checked /boot/grub2/grub.cfg and the 'elevator = noop' is added to the command-line as expected. Following the same procedure except with the start-up of the BIOS to change the disk scheduling algorithm for 'noop' as expected.

    It would be appreciated if someone could verify that this is indeed a problem. Thank you!

    Shaun

    I solved my problem and displaying the result below for those who change the IO Planner in CentOS 7 when the option to boot using EFI interface. There are two ways to make the change:

    Change the default settings for grub and then run grub2-mkconfig

    (1) open the/etc/default/grub file and add a/change the following line

    GRUB_CMDLINE_LINUX_DEFAULT = "elevator = noop"

    (2) to reconfigure grub with the command

    # grub2-mkconfig - o /boot/efi/EFI/centos/grub.cfg

    Alternatively, use the grimy Linux command

    (1) enter the command

    # Sales - setting a day the kernel = ALL - args = 'elevator = noop'

    Restart the virtual machine, and then make sure that the IO scheduling algorithm parameter with the command

    $ cat/sys/block/sda/queue/scheduler

    Note: The default IO Planner has been changed in RHEL 7 to "deadline" for all block devices except for the SATA drives where "cfq" remains the default. The option 'noop' uses FIFO, thus leaving the planning for the hypervisor IO.  See the documentation for RHEL 7 Chapter 5. Storage and file systems.

  • Cannot start the services after update to 6.6 CentOS

    Hello

    Today, I've updated my CentOS to release 6.6.

    When I now try to run the current version of the reader for my virtual Windows 7, I get after the modules updated the error message "cannot start services. See log file for more details /tmp/vmware-root/vmware-modconfig-3866.log".

    The log file is added.

    Who can help me?

    Greetings!

    kuespert

    Hello

    I have another problem after Player 6.0.4 update. See /dev/vmmon with Reader 6.0.4 and CentOS lack 6.6

    The current thread continues here.

    Greetings!

    kuespert

  • CentOS P2V fails after 63% - unexpected EOF in archive.

    Hello.

    This is Centos 6.2
    / Home is a volume logic running ext4.
    / is also an ext4 running of the logical volume and it can copy only.

    / is 50 GB

    / Home is 405 GB would that be a problem?

    FAILED: An error occurred during conversion: "/ usr/lib/vmware-converter/bin/ssh - z f /usr/lib/vmware-converter/ssh.conf [email protected] Pei 22" tar - one-file system - sparse-C/home - CF-. » | /bin/tar_1.20--numerique-proprietaire--restauration-directory-retard - C/mnt/p2v-src-root/home y - xf - read from the remote host 10.0.0.4: connection reset by the pair/bin/tar_1.20: Unexpected EOF in archive/bin/tar_1.20: Unexpected EOF in archive/bin/tar_1.20: error is not recoverable:

    out now (code 2 back)"

    I had to disable SSL in the converter and move the machine from the dmz to the LAN network.
    Thank you guys.

  • SE host root access of vCenter (somehow)

    I've got 2 hosts which I can access via vCenter (domain admin creds). However, we never gave the root password (or no matter what password) for the local hosts. Now, I am loaded with access to the root of these hosts. They are guests of production so I cannot restart them on a whim but can schedule a reboot if it will certainly make me access. In addition, guests are a few States away so I don't (yet) have console access.

    Any suggestions?

    I see two methods that may work. The first depends on your licenses, i.e. requires Enterprise Plus license. In this case, you can set the password using profiles of the host (see, for example, http://www.vladan.fr/how-to-reset-esxi-5-x-root-password-and-under-which-conditions/). The second method-I've never used myself - is to modify the hosts to authentication AD (which you already did), create an ad "ESX Admins' with the right AD users group, and then connect to the host using the user account AD to change the root password. You may need to wait a few minutes for the ESXi host pick up the members of the AD Group.

    André

Maybe you are looking for

  • BlackBerry Smartphones Smiley alert - what is?

    At the top of my screen (BB8320) a smiley with a red star and a figure 1 appeared, just as a new alert message but with a smiley instead of an envelope. There is nothing in my Inbox or anywhere else that I can find, I'm looking forward to remove it b

  • Property of asm disk

    Hi all, I want to install Oracle 11 g Linux for autonomous database.so grid infrastructure I can install DSO as a user of grid and also created the disks as a user of the grid. Now., during the creation of the db in oracle user disks don't leave to u

  • Go to a custom menu, Find_Window and all the Normal State or Open_Form

    Hello experts!I'm under forms/States 11.1.2.2. My developer is on Windows XP.The company's request is handled as a MDI with a menu. All open forms in the menu remain in the MDI.In the menu, I try to use the integrated the FIND_WINDOW to determine if

  • Cannot drag the Insert menu to a toolbar

    HelloI've updated DW to the latest version of yesterday. One of the features I've used a lot in previous versions was the horizontal Insert menu. I looked at it add, found this article: CC Dreamweaver: restore classic insertion bar and I found a simi

  • if-then-else logic

    Here's the test with values from the table and insert. create table students (   name varchar2(25 BYTE),   joined_date DATE,   exam_type VARCHAR2(25 BYTE),   SCORE NUMBER(2,1),   CUT_OFF_DATE DATE ); insert into students values('john','26-mar-14','SC