Centro camera settings menu?

Similar Questions

• Hello. I have perchased the new iphone, and I gave my old iphone to my little brother. I erased all the content and the date in the settings menu. This will automatically delete all my photos data old messages etc. thanks

  Hello. I recently perchased the new iphone, and I gave my old iphone to my little brother. I erased all the content and the date in the settings menu. This will automatically delete all my photos data old messages etc. thanks

  Follow the directions here: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support before giving the phone to your brother. -AJ

• Quick settings menu disappeared

  Hello world

  Drag it to the bottom of the settings menu fast disappeared from my Z3. By dragging down through the top with 2 fingers does not bring the menu down. Nor can I use the notifications at the top right to access the menu. However, I can sound Layout Panel by using the volume knob.

  Tried this:
  Settings > personalization > Quick settings

  but I did not see settings quick option.

  any suggestions pls? Thank you

  @spacekadet

  It is quite strange, you might want to fix the phone with PCC

  PC Companion (CCP)

  Bridge (for Mac)

  Alternatives on how to backup Xperias

  http://talk.sonymobile.com/thread/36355

• Settings menu all the utility of the printer HP F4580 grayed out on Mac OS 10.6.8

  I can't use all the settings menu in the HP Print utility to print a test page, align or clean the cartridges - the menu is grey.

  (Ironically, it's the only option of the HP Print utility is worth a dang.)

  This used to be available. What should I install to make it work?

  Hello crabpawsand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having problems with printing utilities.  I would like to help.

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend reinstalling the HP Deskjet full feature software and drivers - Mac OS X v10.4, v10.5, and v10.6.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• I installed camera raw which supports photoshop cs5 several times, but why I'm not able to find the raw camera filter menu Filter?

  I installed camera raw which supports photoshop cs5 several times, but why I'm not able to find the raw camera filter menu Filter

  Hi sharathm,

  Greetings!

  Camera filter gross was not with photoshop CS5.

  You have installed the camera raw plugin and not filter raw from the camera.

  You can open files in camera raw using of bridge or just right click on the image and choose open in camera raw.

  Check out this video here: https://www.youtube.com/watch?v=UKJuUC9_XUg

  Concerning

  Jitendra

• Cannot access the settings menu in creative cloud app.

  I recently received an automatic update to CC2015. Once it is installed, I see the CC app at first pitch up (before the update he reduced) with wheel constantly spinning. I tried several solutions I found online, including the removal of the content from the OOBE folder. After that, the creative application Cloud seemed to load and work as is should (I could update my applications), and there was no turning endless wheel.

  However, I did not want it appears whenever I restart windows. I soon discovered that, when I try to open the settings menu, there is no response. No matter how much I click in the area of the gear icon bit, nothing happens. Ideas on how to proceed?

  WIn7 X 64 professional

  Photographer subscription

  Uninstall your application of office cc, own by the use of the Adobe Creative Cloud cleaning tool to solve installation problems , and then reinstall your cc app.

• Imports RAW - possible to use cameras settings?

  This may be a stupid question, but is it possible to import FIRST files in LR and batch process them using predefined parameters that reflect the camera how he is to say how the camera would create the jpeg format, but obviously without converting them to JPEG?  Can I specify that they must be treated like my Canon EOS70D?

  Thank you

  It's one of the problems when you are working with raw images. Each manufacturer of the device stores the parameters of the camera differently in their owners raw file format. Lightroom and Camera Raw (used by Photoshop and Photoshop Elements) are designed to only reads DO NOT these settings because of how differently, they are stored.

  There are a few alternatives that will help mitigate this. First of all, you can set one of your images so that it matches the JPEG and then you can create a preset that can either be applied individually or applied to all raw, when imported into Lightroom. This could be a preset or several presets. But only a preset can be applied to the import. The other option would be to adapt one of your raw images so that it matches the JPEG and then save the new camera default values. These default values then apply whenever you import new images or reset the images that have already been imported.

  Since you use a Canon camera, in the section of calibration in the develop module, you'll find profiles of different cameras available that are designed to match the different camera settings that you can choose in the camera. These profiles can help get the picture more closely what looks like JPEG.

• Application of camera settings/adjustments to the RAW images

  Hi all

  I recently bought a new camera (Canon 600 d) and am shooting in RAW + jpg.

  I do many settings on the device (exhibition, creative effects, etc.) that apply to the fine JPG format.  Is there a way to apply to the RAW image also (in LR) without changing any settings manually using the module to 'develop '?  For example, I can right-click on a RAW image and select 'Apply the settings of the camera' or something of the sort?

  On a side note, is it possible to ask to lightroom to simply use the JPG version rather than the RAW version (on a basis individual photo)?  Lightroom as I currently put in place using the JPG only in preview.

  Don't know if it's relevant, but I use the latest Lightroom 3.x on Vista.

  Any help appreciated,

  Peter

  Pea wrote:

  Hi all

  ... Is there a way to apply to the RAW picture too without changing all the settings manually using the module 'developing' in lightroom?

  Lol... the camera settings other than the white balance and ISO are not used by Lightroom. You can use the JPEG format as a guide to make your adjustments and if you constantly do the same settings, create a preset to apply to images.

• 'Settings' menu item disabled - why?

  I have a flash application that makes an audio recording via our fms server on influxis.com. then I do the usual stuff like trying to open a microphone etc. when the charges first app, it tries to find a microphone, but the library says microphone the microphone is muted. also, when I right click on the application, the menu item "Settings"... "is disabled. Why? normally, the user can select a microphone to use through this dialog box. the only way to make it work, it is to open another application that performs video recording, right-click, select 'Settings' (not disabled for this app!) and then set the microphone settings.

  My big question is why the "settings" menu item is disabled for my application?

  any help greatly appreciated

  BHU

  Hi bhu,.

  I was also curious about it so I asked around.  It seems that there is a minimum requirement of width and height for the parameters dialog box to activate.  Try to set the width of your swf > = 215px and height > = 138px.

  Thank you

  Chris

• What resolution camera mode is used by the Flash Player camera settings manager

  What the camera resolution is used by the camera Flash Player Settings Manager? I refer to adjustments of the device that you have to pull up with a right-click on a swf file in Flash Player that is currently running, and in the context menu, you click on settings... click on the camera... and then you can press the camera icon bit and will show you the video stream directly from the camera.

  In order to view the live stream, Flash Player asks a camera resolution mode the driver. This mode is requested?

  For example, it would be 160 x 120 @ 30 frames per second?

  Or is it of 176 x 144 @ 30 frames per second?

  http://www.Macromedia.com/support/documentation/en/flashplayer/help/help04.html#117113

  So so the default would be 160 x 120 according to the AS3 API Reference

  We use a Hauppauge camera driver and the test live stream is empty in this dialog box settings of Adobe Flash Player. While we try to coordinate with Hauppauge to add support for their driver of the camera so that the dialog box settings of Flash Player can preview correctly the supply unit.

• Is there a way to change the camera settings if you do not see your own face?

  It may be a stupid and obvious question, but is there a way to change the settings of the camera on Skype, so you can see the other person and not yourself? He kills sort of the illusion of a conversation face to face when you have a clumsy mirror of yourself that you can not get rid of! I looked online for help with this and found nothing, and minimizes the cheat only I understand Skype altogether and end up with only a tiny picture of the other person. Looks like there must be a better way!

  Thank you!

  There is no option to remove the image of P - P yourself, but if you click on this image it will reduce to a small thumbnail image.

• Lenovo program - T420 cannot access camera settings

  I have a T420 and cannot access my camera, because I've upgraded to windows 10 and keep to said that I need the program setting of Lenovo, I found, but when I click on get the app, I find myself with just a white screen... I tried several sites and get the same thing... Any ideas on how to get the settings program

  Moderator edit: added detail to the subject

  Hi Cyprusbob and welcome to the Lenovo user community!

  You have a ThinkPad parameters dependency installed?

  http://support.Lenovo.com/us/en/downloads/ds104935

  If you do not ' yet fact, take a look at the support page the T420 and make sure you have installed the latest Windows 10 drivers, or run ThinkVantage System Update.

  I hope this helps!

• How to change the acquisition on GigE Camera settings in VBAI

  I have a line scan application where I need to control the rate of the line depending on the speed of the machine.  I use Vision Builder (Vbai) 2009 and I have Labview, but not the Module's development of Vision.  I use a custom Labview User Interface for VI.  The camera is a camera of IRLS Basler Runner RUL2048 - 30 GM GigE.  I created a Labview VI, who wrote the price of line and it works, however when Vbai executes the step of acquiring Image GigE she ignores everything I wrote to the camera and use the parameters that are defined in the step to Aquire Image itself.

  I tried to create an Image Acquisition VI in labview, but when I run it in Vbai, there is no image output to be processed.

  How do I

  (a) make the Image of Aquire GigE "keeps" do not overwrite certain perameters or

  (b) acquire an image in Labview and "transmit" to Vbai for treatment

  It seems to me that the ability to control the settings of the camera of the user interface is a basic function, but I can't seem to find a way to make it work.  Any help would be appreciated.  Thank you.

  There should be no problem switching between inspections that have the stages of acquisition. Looks like you had an inspection that set the rate of line using a run a LabVIEW VI and I would bet that the session didn't get cleaned properly in the VI you run so when you changed an inspection which attempted to use this camera, the camera was still in use in the LabVIEW that does not have the session closes correctly. I would recommend standard VBAI doing to interact with cameras and then it won't be a problem.  When the new step comes out, it will be much easier / cleaner to fix in VBAI.

  Thank you

  Brad

• How to set the zoom settings menu for lecroywaverunner 6050A

  Hello

  I am trying to initialize the zoom settings of a track of the labview on a Lecroy WaveRunner 6050 A fft. I found how to set the parameters of the fft with the manual of the remote control for LeCroy scopes  http://cdn.lecroy.com/files/manuals/wm-rcm-e_rev_d.pdf ) but I have not found how to set the menu zoom settings.

  I also tried with find command using the command of automation of Lecroy. ( http://cdn.lecroy.com/files/manuals/automation_command_ref_manual_wr.pdf ). but I think that there is a problem with the settings of the commands I send to the scope.

  I just need to put the horizontal and vertical centers and scales.

  If anyone can help,

  Thank you.

  Hello

  I use F1 as my FFT here track.

  Commands to change the scales are:

  Vertical Center: VBS ' app. Math.F1.Zoom.VerCenter = XXXX"

  Portrait/div scale: VBS ' app. Math.F1.Zoom.VerScale = XXXX"

  Horizontal at the Center: VBS ' app. Math.F1.Zoom.HorCenter = XXXX"

  Horzontal scale/div: VBS ' app. Math.F1.Zoom.HorScale = XXXX"

  I also want to point you to an application on the scope that will help you.

  If you go to the file menu and select cut, to the office, there is a shortcut to an application called "XStream Browser"

  The browser is an interactive application that will present all automation methods and properties that are available on the scope.  He acually connects to the scope of the request, so you can use it to test various components to see what they do on the scope.  It is very intuitive and I use it exclusively. (this is where I went looking for the commands above for you).

  Here is a link to Chapter 1 of the manual of automation: http://cdn.lecroy.com/files/manuals/04_xstreamautomation_ch1.pdf

  Page 1 - 5 has a quick introduction to the browser and its use.

  I hope that it becomes operational.

  Kind regards

  Leonard Brown

  LeCroy sales engineer

  1-800-5LeCroy

• Acquisition of gain in current camera settings?

  Hello

  I would like to know if it is possible to know the current camera Gain and shutter speed settings. I m using a camera to Firewire 1394 IMAQ for the Vision Application. All possible solutions to the above would be welcome.

  Thank you.

  Check out this KB.

  http://digital.NI.com/public.nsf/allkb/E50864BB41B54D1E8625730100535E88

  Best regards

  Ravi.