Centro, when Im on the internet, no pictures will only show a small red and blue image

Similar Questions

• the images show black with red and blue sections on importation

  Newly installed 5 Lightroom on new computer (HP ZBook with 4 k screen).  When the files are imported from SD card on the display main and previews images are mostly black with some red and blue areas.  I tried disabling autotone and indicators of clipping and tried disabling GPU and the changing screen resolution - nothing helped.  I can see histogram and use the sliders to change the picture a bit, but can "lead to normal. The same images of this SD card are fine in Lightroom on my old computer.

  What can I do to fix this?

  Thanks, Paul

  This looks like a bad monitor profile. You must re - calibrate your monitor. If you do not have a calibrator, go to the properties of your monitor (it looks like the right of windows) and remove any profile associated with the parser. That do Windows will take your monitor is sRGB. This should solve the immediate problem, but it is always recommended that you calibrate your monitor with hardware calibration.

• How can I secure my laptop when I surf the internet via a public router at work?

  How can I secure my laptop when I surf the internet via a public router at work? I mean if I use a router to work and others use too and I use a private laptop! I heard that someone hase the knoladge he can enter my laptop the couscous that he uses the same router I do. you have a special program for that, or is there a place in my computer that I need to enable to avoid the unwanted entries?

  If your Windows is updated and your Windows Firewall is enabled and that you have updated anti-virus, that would be fine. In Windows 7, you must check Action Center in Control Panel to see your security status, if something is wrong that it will show a message in Windows XP and Windows Vista, he calls the center of security.

  They may only enter your laptop or hack, if your firewall is disabled or there is a vulnerability in your system or a Malware would cause of vulnerability, and in all cases to ensure that your Windows updates and anti-virus is running, you are protected.

  Another thing is that if your router requires the password, then choose strong password and change it regularly, if it is public without password or authentication, then you need to careful when visiting Web sites because they could be monitor and publicly display information. Some websites have encryption that in Internet Explorer, it shows as a lock icon pad indicating that your transaction is encrypted and you're safe.

  It depends also wireless encryption in your company that will be in service by admin or SOUND Department if it's WPA2 which is good but for WEP or WPA, you should be very careful. I suggest to discuss this issue with your COMPUTER service too.

• How can I configure my Hotmail account as the e-mail account by default when you answer the internet links?

  original title: default email

  How can I configure my hotmail e-mail account as account by default when you answer the internet links? For example when you answer the Craigslist ads it by default my real account of buddies and I can't access that account.  I use Internet Explorer 9

  In general, you need an email such as Outlook Express, Windows Live Mail, Thunderbird client, etc.  Some say that this program can be used to allow IE mimic a client for Hotmail, gmail, AOL and Yahoo mail: http://gmaildefault.codeplex.com/

• When I open a folder with pictures an icon shows for all content, it allows to view the actual image

  When I open a folder with pictures an icon shows for all content, it allows to view the actual image

  Button start, in the search box, type folder options... Enter... click on view tab... turn off always show icons, never thumbnails... OK when finished.

• "Cannot open this page" error when connecting to the Internet.

  Original title: I can connect to my server, but IE cannot get me on the internet

  My wifes laptop shows live wireless to our BT Homehub (my laptop, iPhone etc is it ok too) but tries to connect to the internet, it gets a "cannot open this page" dialog

  Hello

  1 are there any changes or updates made on the computer?

  2. when exactly you get the error message?

  3. the problem only occurs in Internet Explorer?

  Method 1:

  I suggest you to return the item and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Method 2:

  If the problem only occurs with Internet Explorer, I suggest to optimize and to check if it helps.

  http://support.Microsoft.com/kb/936213/ro

  Note: "Please note that the reset Internet Explorer (IE) resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords. »

• When I use the internet online - all written or missing words in my LCD

  Original title: Please help me

  I had a problem with my computer... When I use the internet online... all written or missing words in my lcd screen... I already check that the computer with the antivirus software, but has not detected a virus in the computer... what should I do?

  Windows 7 ultimate 64-bit

  Hello

  1. What is the brand and model of the computer?

  2. what anti-virus software have you tried checking the virus?

  3 have there been any changes made on the computer before the show?

  4. where exactly you are missing words?

  Even if you have used a virus protection software, try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the problem is not resolved, please provide more information to help you best.

  I suggest also refer to the link and post a screenshot:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

• High utilization of the processor in Mode VSS when traffic through the internet.

  Hi all

  I have a problem with the installation of VSS. The VSS service install act as a central office switch of transit for internet traffic and the problem arises when there are about 600 Mbps of traffic through the switch. We notice that there are a lot of packages being softswitch and the rate is quite high, almost like 100 to 200 k per second.

  The VSS switch manages ospf and BGP and have plenty of internet routing. After investigation of high CPU usage, I noticed that the AAGR switch is full and has tried to set the course of max mls to the maximum cef and restarted the VSS service.

  Unfortunately, the problem persists after restarting.

  We had planned to filter the full internet routes and enable by default and ospf route only in the VSS service and restart the VSS service to make sure that the table AAGR is not overloaded.

  If I fail the next step is to return to autonomous mode and hope that the processor will not pull up.

  My Question: These step will prevent the issue? Suggestions or the reference similar to the problem I am facing in?

  Hello Sophie,.

  unless you have a PFC 3CXL and all the DFCs the AAGR 3CXL can manage only 256 000 IP prefixes and nowdays that complete a table is in order or 310-320 000 routes.

  See

  http://www.Cisco.com/en/us/prod/collateral/switches/ps5718/ps9336/product_data_sheet0900aecd806ed759_ps708_Products_Data_Sheet.html

  http://www.Cisco.com/en/us/prod/collateral/switches/ps5718/ps708/product_data_sheet09186a0080159856.html

  See table 1 in the second link it tells what I wrote in the first line.

  > We planned to filter the full internet routes and enable by default and ospf route only in the VSS service and restart the VSS service to make sure that the table AAGR is not overloaded.

  You should not need the device after accepting only the default route in OSPF or BGP AAGR use will be greatly reduced this is just wait a few minutes (unless there is an underlying SW bug) for the MSFC to update CFP and then all DFCs

  Hope to help

  Giuseppe

• When I try and play BBC I player or the BBC radio he will play for about 30 seconds and then starts to buffer.

  Original title: download

  Just upgraded to Win.8 when I try and play BBC I player or the BBC radio he will play for about 30 seconds and then starts to put in the memory buffer, all of the ideas.

  Hi Mike,.

  This could be a problem with Internet streaming on BBC iplayer or BBC radio.

  I would like to gather some details related to the query:

  (1) is this problem specific to the reader of the BBC or BBC radio? Are you having the same problem watching videos online or listen to music online on the computer?

  (2) deal with the issue with a single channel on the radio?

  (3) how you try to use the iplayer? It uses the browser? If so, what is the Internet browser?

  If this problem is specific to the BBC radio or iplayer, you can post the query on the forum from the BBC to help:

  http://www.BBC.co.UK/iPlayer/episode/p0196ln8/The_Forum_Fragility_in_Nature/#

  Please get back to us if the issue is not specific to the BBC player and we would be happy to help you come.

• When I try to print from captivate it can be using the print or print from the browser menu widget it only shows half a screen

  When I try to print from captivate it can be using the print or print from the browser menu widget it only shows half a screen

  I use 7 Captivate. I need the user to be able to print the results. The certificates are not an option. They are too limited. When not published in HTML 5, I have a print widget. He wants only half of a print screen. If I publish to HTML 5, I can then the file menu of the browser user to print. However, she still shows only a mosquito net. How can I fix this.

  They must be able to print the results page. I've included a sample using the login screen. Below you can see what I see on the screen of the printer browser

  

  This is what it must have printed.

  

  What is the cause? Can anyone help?

  It ends up being a problem for chrome browser after all. Easy correction. Use Internet Explorer. This works well for us. Our intranet uses Internet Explorer by default.

• When I press the SHIFT key to get to register this happened @: M and when I press on enter key this happens #__nb so how can I change the setting I tried to format it but it's always the Sammy _ same__Regards

  When I press the SHIFT key to get to register this happened @: M and when I press on enter key this comes up #.
  NB so how can I change the setting, I tried formatting but it's always the same
  Cordially Sammy

  Try another keyboard, if that solves your problem is faulty and should be replaced.

  "sammy06forever" wrote in the new message: * e-mail address is removed from the privacy... *

  When I press the SHIFT key to get to register this happened @: M and when I press on enter key this comes up #.
  NB so how can I change the setting, I tried formatting but it's always the same
  Cordially Sammy

• When I have the creative menu Cloud pulled up, I click on APPS and keep continually make me a "download error. Please retry to try again, or contact customer service. I am trying to download a new application InDesign and have also tried this through Adob

  When I have the creative menu Cloud pulled up, I click on APPS and keep continually make me a "download error. Please retry to try again, or contact customer service. "I am trying to download a new application InDesign and have also tried via the Adobe website on my account, but he has not yet worked.

  Download error in the applications tab of Creative Cloud Desktop Application

  https://helpx.Adobe.com/creative-cloud/kb/download-error-apps-tab.html

• Hello, I have a question. I want to buy a new macbook pro. On my old macbook is photoshop CS6 and Lightroom 6. When I put the time machine on my new macbook. Does PS and LR?

  Hello, I have a question. I want to buy a new macbook pro. On my old macbook is photoshop CS6 and Lightroom 6. When I put the time machine on my new macbook. Does PS and LR?

  We do not recommend installation from a backup, time machine, or migration of files. All programs must be installed from the installation files.

  Please try to install from here: Download produced CS6

  After downloading the installation files, see these instructions to extract the files and install your product.

  And lightroom from here: Download Photoshop Lightroom

  Moving to download, installation, setting up

• When I click on the download button opens a page with three small boxes, and I think that this means a wait, but they lasted more than two hours, unfortunately and I tried many things and each time gets the same, I work now want photoshop required a

  When I click on on the download button opens a page with three small boxes, and I think that it means a wait, but they lasted more than two hours, unfortunately and I tried much and each time gets the same thingit's working now, I want photoshop necessary and reminders even when I tried to buy the same thing happened to me Please I want to a quick solution

  Make sure that you have enabled cookies and clear your cache.  If he continues to not try to use a different browser.

• I have Lightroom 4 purchased in disc download format. I'm considering buying a MacBook Pro, but it's not a CDRom. Can I use the serial code for download on MacBook via the internet? I've only used once disks for my iMac.

  I have Lightroom 4 purchased in disc download format. I'm considering buying a MacBook Pro, but it's not a CDRom. Can I use the serial code for download on MacBook via the internet? I've only used once disks for my iMac.

  you need a serial number for mac lr.  the serial number for pc and mac are different.

  Lightroom serial number is unique because it is cross-platform: works on PC and Mac.

  Same serial number for both.