I have Lightroom 4 purchased in disc download format. I'm considering buying a MacBook Pro, but it's not a CDRom. Can I use the serial code for download on MacBook via the internet? I've only used once disks for my iMac.

Similar Questions

• Windows 8 "not connected to the network" but it is, shows computers and can connect to the internet. How can I fix it

  I used the Windows 8 Pro Upgrade on a Windoxs XP pro installation.  Everything works except that the network and sharing Center indicates that the computer is not connected to a network, but it is.  I can files in front on other computers on the network (at home) and I can access the internet.  The active profile is public, although it should be private. I created this to access the homegroup during installation.

  I'm trying to get a first HD Homerun operation and if Media Center does not have any network, he sees no tuner either.

  What can I do to get this working properly.

  a. no red X

  1. I tried to download a different driver, but it didn't work at all so cancelled.  To check if it was a pilot, I bought a usb wireless adapter.  I've disabled the ethernet connection and used the wireless connection.  The results are the same regardless of which connection I use.

  2. ran every convenience store without success

  3. services were what they were supposed to be

  4 safe mode is worse.  No network connection (cannot see other computers in all), although internet is accessible

  5 start gives the same results. "You are not connected to a network" yet the computers on the network are visible and accessible top records.  Internet is available.

  I installed the software very little on this computer (just installed Win 8 last week.)

  The only installed software is software HP Officejet L7680, Brother HL5250DN & first Silicon Dust HD Homerun software driver. I'm trying to set up basically as a DVR, so very little will be on it.

  The only thing I can think is that I started with the installation of XP has been implemented using a VPN to connect to our network at work. This means that the computer should be part of the field it. Is it possible victory 8 retrieves these settings and now here's what's causing my problems? (I think that very few came from an installation of XP, but I noticed that some parameters met).

  I plan to start again and re-installed Win 8 a last ditch effort... If you can offer any suggestions on repairing this conditioin, please provide me with the best way to re - install Win 8 as a clean install (without the things I installed). I'll then make sure that the network is working correctly before installing anything.

  *************************************************************************************************************

  A follow-up for this reading. My problem was apparently caused by the upgrade of XP and usinging Dungeon files and SETTINGS. Although there are very limited items brought back an installation of XP, something is buried somewhere off network connections.

  To solve this problem, Windows 8 has a new feature called reset. This essentially Setup all over again if you choose the option to delete files. You must enter the product key again when you do this. This is a clean install.  I had to update the graphics card drivers, add Media Center back, install HD Homerun Prime, run the Advisor of cable, making the TV configuration and finally got it works as I had expected.

• How can I start my brand new MacBook pro, but I do not know password which someone of the store to

  How can I start my new MacBook Pro? I do not know the password for someone to the store to put it on the laptop. How can I change? I don't even connect to the laptop but I didn't even ID Apple on this topic, but I have an Apple ID on other Apple devices. Please help ASAP

  If you start the macbook does show something similar like this video? https://www.YouTube.com/watch?v=_g-3me2VTGo

  For a mac for optimum operation, you need a apple ID (to download apps and updates on the app store).

  If your mac asks you a password at startup upward, you must return it to the store you bought it and ask to remove it.

  I hope this helps!

• Adobe Acrobat Pro, but it will not install on my machine (to the former).  What is the next step?

  Just downloaded but it will not be installed.  What should I do?

  What version of Acrobat? What OS?

  The solution is to get an older version of Acrobat (if you can) or to update your computer.

• Try to install Adobe Flash player on my MacBook Pro, but it does not recognize my password, and yet the same password works on the adobe web site

  password problem when you try to install Adobe Flash player.  my password works on the site of Adobe, but not when I get it on the installer...

  you are be prompted for a password for your mac.  using his password.

• I just paid for adobe acrobat, but it does not work, where can I get the serial number?

  And it does not appear in my account

  You have purchased a subscription that has not only any number of series, please refer to https://helpx.adobe.com/creative-cloud/kb/asks-serial-number-error.html

  Concerning

  Stéphane

• I can't access the internet with IE 11 on my PC so I would like to download Firefox on my laptop and install it on my PC. I have been using Firefox on my laptop.

  I use Mozilla Firefox on my laptop and I would like to install it on my PC because Internet Explorer 11 stopped working. I can't access the internet so I downloaded the installer of Firefox on my laptop and saved on my PC. It initializes, but unable to connect to the internet to retrieve the program. How can I work around this problem and install your browser?

  Unfortunately, it did not work. I tried downloading earlier and it cannot connect to the internet. I need the program to install. I reset IE 10 as their recommended technical support and I even tried to reinstall, but that no longer works. I'd rather have Firefox

• problem with express mini pci wireless lan card. I can't connect to internet via wifi but I can connect to the internet via cable.

  Hello! I have a problem with my card express 11 b/g/n wireless lan mini pci because I can't connect to internet via wifi but I can connect to the internet via cable. whenever I try to connect it repeat to myself that there is a problem with your wireless network card. I tried troubleshooting, uninstall and reinstall the program, but always the same result. I'm updating too but still the same thing. I use a windows 7 Professional on my Lenovo 412. can someone help me? Thank you!

  Hello

  Method 1: I suggest you to follow the instructions of the link to solve the problem of network card:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 2: Troubleshoot wired and wireless in Windows network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference: http://forums.lenovo.com/t5/R-and-L-Series-ThinkPad-Laptops/L412-Wireless-Automatically-Disables/td-p/264447

  You can also post your question in the forum of Lenovo to get help:

  http://forums.Lenovo.com/

• I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Hom

  I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Home tab to check the activity and the Stock tab. The applications tab is missing. How can I get that back so I can update photoshop and lightroom?

  Please, try the steps mentioned here https://helpx.adobe.com/creative-cloud/kb/apps-panel-reflect-creative-cloud.html

  Let me know if it works!

• can I use once the mac version and version of window?

  can I use once the mac version and version of window?

  If I buy a CS6 mac and then use window too, it is ok?

  A cloud subscription allows to activate on two computers, both on a genre or one each on Windows and Mac

  CS6 is specific version... you buy for Windows or Mac Creative Suite 6

• Reinstalled XP, but now I can't access the internet

  Hello

  I recently reinstalled Win XP on the same computer on which this copy has been installed.  The computer will have access to our home WiFi network, although he does not always see other computers on the network.  Worse, is that when I run IE6 Service Pak 2 (the version that is installed on the original disc), I can pull up the MSM homepage which will remain for about 15 seconds, then I get an error that IE has to close.  I think it boils down to "I can't access the Internet."  Tried everything that I can think and followed a number of suggestions on this forum.  I've seen comments that I need the update to Windows Service Pak 3 here, but, of course, I can't that without access to the internet.

  Any ideas?  Thank you, Susan

  A few thoughts...
  -from another computer...
  -Make sure you get all the drivers for your computer from the manufacturers Web site
  -Download a form any anti-virus (MSE for example)
  -Download SP3 from here: http://www.microsoft.com/en-us/download/details.aspx?id=24

  Once you have done this, I hope you can get on the Internet. Once there, get all your updates.

  I hope this helps.

• I try to enable Microsoft XP on a laptop and can't access the Internet to activate.

  I try to enable Microsoft XP on a laptop and can't access the Internet to activate. I have 8 sets of code available, but the phone activation computer said that the codes were not recorded. I need to save this software to get this laptop for my daughter. I can't download and upload diagnostics using my computer. All I get is the splash screen, click the user, and then it will activate the windows screen. When I can't activate online, it suits me and turns off. What else is there to say?

  Of course, you can get online with something :)

  Download the tool on your current computer and transfer it to the affected - save the output in a Notepad TXT file and copy to your functional PC, and then copy the ocntent you your answer.

• Extender installation does not, can now access the internet

  I tried to set up an Extender linksys with the installation CD, and did not again... and abandoned.  Subsequently, all attempts to access to the internet don't... by using outlook express and internet explore.  On the wireless network of my daughter and mine.   The installation cd said it was "set up" the network... would it have done something for my internet access because of his failure... I was able to get email and surf just before the installation to fail.  Any ideas how to solve this problem?  TIA... pp

  You must go back into the setting for the wireless network and you map the TCPIP setting for automatic configuration value.

  Read a few other posts here are detailed instructions on how to configure your network adapter so that the setup of the process will work.

  Once you can find on the internet again you can just click the automatic configuration button and do work.

  Thank you

• When I disable the NAT on my WRT160N I can't access the Internet

  Hello

  I had my WRT160N set up and great to work for months.  I had a few non-cable problems and the Cable Guy split my cable and now I have a specific modem just for the internet.  I can connect to the internet directly and great wireless!  However, I went into my XBox 360 to play some Halo 3 and he yelled at me that I have to disable the NAT.  I thought it was weird because my WRT160N is still the same piece of material and I think that's where I have disabled the NAT months ago and that he should always have this same setting.  Apparently not?  So I connected to it and of course it has been activated.  I disabled it and now I can connect is no longer directly or wireless internet.  Of course, if I set it to active NAT so I can get to the internet again.  I need to disable NAT.

  Don't know what to do here.   Is it possible on the modem cable (Time Warner Cable) where the problem lies?  HE would have a configurable parameter for the NAT?

  Any suggestions would be most appreciated.

  Kevin

  Make the following settings for X - Box...

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...

  On the Configuration tab change the size of the MTU to 1365, then click on save settings...

  Click the 'Administration' tab and disable UPnP and click on save settings...

  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...

  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and type in 3074 service box, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable, click on save settings once it's been...

  (2) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...

  3) click on Setup and change the size of the MTU to 1452 and click on save settings... Click the status tab, and take note of DNS1 and DNS2 address...

  (4) address IP, Goto settings XBox network settings and assign the following on your Xbox and select manual IP settings
  IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...

  (5) also assign addresses DNS on Xbox
  Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...

  (6) turn off your modem, router and Xbox... Wait a minute...

  (7) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

• I can go to the internet and all, but on the icon say "NOT CONNECTED" and I tried to connect to the network for 2 weeks already... its still not not workin... Please help!

  I tried to connect to the network several times but its still saying 'not connected' but I can go to the internet and all...
  and I also try to fix or diagnose, but its still not not workin...
  Please help idk what 2 do more...

  Hello

  Good luck, you need technical support for a real computer store or system manufacturer is supported.

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon. You can download these on another
  computer if you need to and transfer on removable media.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.