CEP 6 Documentation

Similar Questions

• Replication failover PIX VPN (CEP) certificate

  Hello

  Had a pair of PIX 525 on 6.3 (4) version running in active/failover mode, I recently configured VPN authenticated by certificates, which involved the use of PRACTICE in order to get the certificate to the PIX. Certificates have been imported for the PIX from a snap-in with the software component CEP Protocol Windows CA server by following the instructions described here: http://www.ciscosystems.com/en/US/docs/security/pix/pix63/configuration/guide/sit2site.html#wp1007263 .

  It all works very well, the configuration has been saved, certificates registered cases using "ca save all", everything works well except the certificates that have been imported have not been replicated for the PIX failover - the command 'Show the ca certificate', shows not all certs.

  Private keys show 'sh ca mypubkey rsa' are the same on both devices.

  I'm not able to find any documentation about how certificates must be replicated on the PIX failover, and it is not possible to write certificates again on the PIX failover using the commands they were initially imported by:

  PIX - fw # conf t
  WARNING *.
  Configuration of replication is NOT performed the unit from standby to Active unit.
  Configurations are no longer synchronized.

  PIX - FW (config) auth ca ca
  WARNING *.
  Configuration of replication is NOT performed the unit from standby to Active unit.
  Configurations are no longer synchronized.

  Everyone knows a similar issue or how to get the PIX failover with the new ca certificates?

  Kind regards

  Sarunas

  Hello Sarunas

  PIX 6 indeed do not synchronize keys and certificates automatically.

  However, you should be able to do this first, forcing a failover (i.e. secondary image make it active), then register (now active) high school with the certification authority.

  HTH

  Herbert

• Where can I find documentation for the SDK of first?

  I already asked several questions in the forums, but I'm still lost. For each feature, I would like to implement, I come here to ask if it is still possible.

  So, what I would like to be my last question: is there an autour documentation?

  CEP 6 Extension HTML Cookbook for 2015 CC · Adobe-CEP/CEP-resources Wiki · GitHub

  This will give you a lot of important information.

  But there is no official documentation for ExtendScript APIs. I recommend so the PProPanel example:

  Samples/PProPanel to master · Adobe-CEP/Samples · GitHub

  I do not recommend questions here. Especially if you search in the ExtendScript APIs. Adobe´s Bruce Bullis used to be very responsive and dedicated. In addition, I started following these forums to help others since I know how complicated Premiere´s SDK can be at the beginning.

  Thomas

• distribution of the cep load generator model

  Hi guys,.

  You happen to know the model of distribution (for example. Fish , uniforms...) generator load Oracle CEP?

  See you soon,.

  Alireza

  Seems that there is no documentation for this.

  My curve experience shows that he does not follow a particular distribution. For example, tuple rate 100 per second, the distribution model is location t scale for some queries, while for 50 k and 100 k speed distribution is more apt to Weibull and generalized extreme value distribution.

  I just wanted to add some pictures here, but the system gives me the error. In any case, it is the answer.

• Where is the Documentation of the API for the Premiere Pro Panel SDK?

  I see the links to the sample application and the getting started guide, but where is the actual SDK documentation?

  Where is the documentation that describes the options for manifest.xml?

  Where is documentation of AGENCY javascript API for the type of functions used in the sample application (ie: "$. _ext_PPRO.importFiles ()" "")

  What about documentation for this global "__adobe_cep__" object I see in CSInterface.js in the example?

  Thank you

  There is no documentation for the ExtendScript API organization; the example code work is the right place to start. Feel free to ask questions.

  For the rest: Adobe-CEP/CEP-Resources · GitHub

• CSInterface (CEP) vs Vulcan (CPI)

  Hello world

  I'm looking for a means of communication to be able to send / receive messages from my HTML extension to a native C++ plugin in InDesign CC.

  In different documentations, I saw two candidates therefor: Vulcan (aka CPI Toolkit) and CSInterface (aka CEP). In the creation wizard of extension for the generation of a new extension, two of them are available, by adding two different .js extension.

  What is the difference between them? What are the benefits / limitations for each of them?

  Rémi

  My fault. I finally understood that the CEP and CSXS were the same. Documentation from Adobe has confused me.

  I have seen that Vulcan is an extension of Flex, and CEP/CSXS was for an HTML/Javascript extension.

• At what frequency processor CEP run queries?

  Hello
  
  I have a little trouble understand how cep processor executes queries.
  
  It seems that the queries are executed whenever a new event arrives, which can lead to problems.
  For example, we have 4 events, which match a certain condition. If we try to select these events in a stream like this

  select * from myStream[range 30 seconds slide 30 seconds]

  and events happen within 30 seconds, the cql processor will not query run until the next event happens.
  
  How we force cql processor to run the query every 30 seconds, even if there is no new event?
  
  Kind regards
  Sergey

  Hello

  Have you studied the use of a channel heart beat? Here is a pointer to the documentation

  http://download.Oracle.com/docs/CD/E14571_01/doc.1111/e14301/config_tags.htm#BABFBCDD

  See the Section D.44 heartbeat.

  Kind regards
  Seth

• Any bugs in the CEP Oracle 11.1.1.3.0

  Hello
  
  It seems that there are a few bugs in the CEP Oracle 11.1.1.3.0.
  
  1. the documentation says that customized osgi bundles must be placed in the %DOMAIN_HOME%/serverName/modules/ext or in the % DOMAIN_HOME%/serverName/modules. As far as I understand that oracle CEP provides its own OSGI environment, which is based on the implementation of eclipse equinox. The problem is that the beams in the %DOMAIN_HOME%/serverName/modules or the %DOMAIN_HOME%/serverName/modules does not support OSGI pieces. The environment CEP tries to start some fragments of OSGI, which is false. Example: Try to slf4j api and implementation, which is the fragment to the slf4j api bundle.
  
  2 is it fair that when deploying an application with JMS/output adapters CEP Oracle does not bundle classloader to load configuration jms, for example instantiate the implementation of the InitialContextFactory, specified using the jndi factory tag. If an implementation expected resource, specified using the jndi-provider-url tag, in the classpath, this resource is not found because of the class loader, which is not a class loader of the boot where jms adapter is configured.
  
  Best regards
  Sergey

  Hello

  You're right - the library bundles do not currently support the fragment OSGi bundle function.

  You use a third party JMS provider? Oracle CEP supports the implementation of JMS provider classes in the bundle of the application itself, or as a set of package library. Packaging classes as a library package is usually preferable because it avoids the need to redeploy the classes whenever the application changes. This blog describes the steps for packaging open MQ (the same basic steps are followed to any third-party provider).

  http://blogs.Oracle.com/CEP/2010/05/using_open_mq_as_an_oracle_cep.html

  Kind regards

  Seth

• Manage a deployed application of CEP

  Hi all
  
  After the CEP Server succeeded to deploy and start my application, I have some initialization steps to make myself (read the configuration file, etc.). I want to be able to cancel the deployment of the application in the event that any of these steps fail.
  I tried to use the example code on AppDeploymentMBean documentation ([http://download.oracle.com/docs/cd/E12839_01/doc.1111/e14303/toc.htm]), but I get a - java.net.ConnectException: Connection refused: connect - exception from the method connect on the second line.
  
  I don't have much experience with JMX beans or management, so I appreciate any help you can provide.
  In addition, if you think that there is a better way to do it, I would like to hear it.
  
  
  Thank you
  Roy

  Hi Roy,

  CEP is built on Spring DM. So the Spring bean of the cycle of life and OSGI apply to a CEP application. Beside that, we also support the management of the life cycle specific VINE.
  Following is a statement for her:
  (1) life cycle interface spring:
  InitializingBean, DisposableBean
  (2) life cycle of osgi interface:
  You can implement your own activator to start/stop your application. You must implement BundleActivator
  (3) life cycle interface cep:
  Maybe what you want.
  In order to process the application configuration, you can use @Prepare, @Activate @Rollback.
  Spring lifecycle interfaces: RunnableBean, ActivatableBean, SuspendableBean, ResumableBean

  With respect to the detail please go through the docs of the CEP.

  -Junger

• Where can I find documentation for message filter

  Where can I find documentation on how to create message filters for * all * things that can be tested? The only use of examples of body, or object. I need to be able to test the Content-Transfer-Encoding.

  Almost all emails that I receive that are coded in base64 stuff is spam. How can I filter on:

  Content-Transfer-Encoding: base64
  Content-Disposition: attachment; filename = "proposal.pdf"

  JVBERi0xLjMNJeLjz9MNCjkgMCBvYmoNPDwvTGluZWFyaXplZCAxL0wgNjk4Ni9PIDExL0UgMzA1
  Ni9OIDEvVCA2NjkyL0ggWyA0NDggMTQ2XT4 + DWVuZG9iag0gICAgICAgICAgICAgICAgICAgICAg
  ...

  I tried selecting "Content-Transfer-Encoding" with the value "base64" but it does not work.

  I just tried:
  Content-Transfer-Encoding contains city-printable
  This only 2 items returned, which is much less than the expected result.

  added
  Body contains city-print
  and modified to match one of the following
  This value returned as many, but not all.

  based on these findings:
  Content-Transfer-Encoding contains base64
  I think that would test the first copy of this header, rather than those in the various sections MIME.

  Body contains Content-Transfer-Encoding: base64 would capture more.

  However, I use Thunderbird to capture junk spam control settings, so are not really the issue that you want to filter. Have you set up and trained your filter auto junk removal of these emails to junk.
  http://KB.mozillazine.org/Junk_Mail_Controls

• Y has apps for Car Accident Documentation?

  I did some research on the "documentation" apps car accident and was not able to find much. I had a friend who did not have all the information they needed after getting into a Bender fender with someone else and now I'm careful. I know that I can put it in the Notes app, but I have so many things here, I'll probably lose. I found this one - https://www.davidazizipersonalinjury.com/car-accident-lawyer/iphone-app/ doing some research on Google, but I was wondering if there is something different.

  Is all the car accident documentation apps made by law firms of the injuries? Someone at - it other suggestions of an application that will allow me to quickly take a few pictures, get information on insurance and contact information? It would be great if there were than something built in maps of Apple.

  Thanks in advance.

  Try your insurance company. I had one in Europe of my insurance and I can use it and it sends all the information directly to the insurance company. Very convenient

• Need for documentation on Modem commands

  Hello!

  I have a program to connect to a modem of special data. The program requires an initialization as string: ATZ ^ MATS0 = 1 S = 64 15 ^ M.
  Toshiba modem does not work with to the commands that I use for several other modems (wavecom, elster, devolo,...).

  Now I need a documentation at the controls for the toshiba modem create my own initialization string.

  I thank very you much in advance!

  Ludger

  Hello

  I doubt that anyone here would be able to provide this information.
  First you didn t show all the details about your laptop and on the other hand I m not very good if this info has been published anywhere.
  What about manuel? Did you find anything in the manual?

• Documentation booklet

  I'm trying to learn how the function keys on the booklet. All links to related documentation on the Toshiba Support Site, AskIris, have errors and a "Sorry" message

  Naturally, the keyboards are not documented in the User Guide.

  Hello

  It will be interesting to know what book you have.

• Portege Z10T - documentation of command line for tinstallwb.exe (PVAT)

  Does anyone have any documentation on the command line for tinstallwb.exe, or know the switch to enter these?

  I have to do some recording during the installation.

  We are the Z10t assessment and want to install the package Toshiba value added via SCCM during our deployment task sequence. I did the same thing for the Z930 successfully.

  I use the latest version (1.6.0035.6406) of the PVAT.

  After having extracted the contents of tc30573300f.exe, the command I use is 'tinstallwb.exe s - sms. While this works in my wrapper for vbscript, it fails during the actual deployment. If I could start recording, I could see what goes wrong.

  I tried to install just \TVAP\TOSHIBA package.msi before value added, but even if that moved successfully, these sheets never appear when you press the Fn keys.

  Any ideas?

  Unfortunately, this isn t available documentation.
  I also found advice to install the PPV from the command line

  But the package contains other files such as setup.exe or install.exe exe
  Have you tested the installation, the use of these files?

• I'm looking for documentation on the Firefox command line arguments.

  I'm looking for documentation on the Firefox command line arguments. I use Ubuntu.

  http://KB.mozillazine.org/Command_line_arguments

  This doesn't seem to be what you're looking for?