Need for documentation on Modem commands

Similar Questions

• Need for documentation and references for idXml

  We decided to go with the TPM/OID/OAM of sun ldap and siteminder.vWe have oracle fusion middleware installed with SOA suite and OSB.
  
  Now, I need to make the point of contact for connection to the above CRUD operations and performing of OSB.
  
  Where should I start.
  
  I have the link below. But there are also a lot of documentation in the link below and I'm confused.
  
  
  http://www.Oracle.com/technology/documentation/oim1014.html
  
  
  I was told I should use IDXml.
  1. I am looking for documentation of IDXml and
  
  2. all the sites that help in the realization of connectivity OID/OAM/OVD and perform CRUD operations.

  See the OAM developer guide

  http://download.Oracle.com/docs/CD/E15217_01/doc.1014/e12491/idxmlows.htm#BABEJABJ

  Hope this helps,
  Sagar

• need for documentation of the following components... ?

  Hi all
  
  Where can I find the documentation for the following components... ? Not in the API... ?
  
  
  / ATG/commerce/Order/Purchase/CartModifierFormHandler
  / ATG/commerce/Order/ShoppingCartModifier
  / ATG/commerce/Order/Purchase/RepriceOrderDroplet
  / ATG/commerce/Order/Purchase/ShippingGroupFormHandler
  / ATG/commerce/Order/Purchase/ShippingGroupDroplet
  
  etc...
  
  I can't find them in the guides of CommerceStoreGuide or PageDevelopmentGuide or all programs... Happy if you can provide information on them...
  
  
  Thanks in advance,
  Laurie Bovilla

  CartModifierFormHandler http://docs.oracle.com/cd/E26180_01/Platform.94/ATGCommProgGuide/html/s1003understandingthecartmodifierform01.html
  ShippingGroupDroplet http://docs.oracle.com/cd/E24152_01/Platform.10-1/ATGCommStoreGuide/html/s1660shippinggroupdroplet01.html
  RepriceOrderDroplet http://docs.oracle.com/cd/E24152_01/Platform.10-1/ATGCommStoreGuide/html/s1655repriceorder01.html
  ShippingGroupFormHandler http://docs.oracle.com/cd/E23095_01/Platform.93/apidoc/atg/commerce/order/purchase/ShippingGroupFormHandler.html

  It will be useful.
  -RMishra

• I'm looking for documentation on the Firefox command line arguments.

  I'm looking for documentation on the Firefox command line arguments. I use Ubuntu.

  http://KB.mozillazine.org/Command_line_arguments

  This doesn't seem to be what you're looking for?

• Need to modernize the modem; How do I 'plan' relocation WRT54G Router for wired / wireless

  I went late to upgrade my modem, and from what I've read in the comments, do a modem/router combo doesn't seem to be the best thing to do in what concerns the issues of reliability and range.  So, I want to upgrade my modem & then use the same router/access point that I currently have.  However, I've read other users with problems by accessing the control panel after you connect to a new modem... so want to know the information that I need to have before starting this project.

  Is this to say that I'm going to basically start early and set up my home network all over again?

  I'm pretty tech-savy... but I do not enough to really launch the project & see where it takes me... I don't have the TIME!  Laughing out loud!

  Thanks for any help/advice anyone can offer!

  Jane

  Really, it depends on the type of settings that your ISP would put on the new modem. If the configuration of the new modem would be the same with the old, so there is no need for you to make any changes on the router. Simply connect the new modem, perform a powercycle by unplugging the power cord from the modem and router and it should work. However, if it is not, what you can do is to reset the router and reconfigure. The following links help you reconfigure the router after a reset.

  Setting up a Linksys router with cable Internet service

  Setting up a Linksys router for DSL Internet connection

  Setting up a router with a static IP address account

• Toshiba NB500-116: enter the USSD for Ericcson F3307 modem 3G codes

  I need to know if there is a way to enter codes USSD for Ericcson F3307 modem 3G integrated into this Netbook. It is needded to manage mobile data usage and code * # 141 should be entered.

  Hello

  Not sure about the USA codes.
  But here's a way to create a connection with 3G modem:
  http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htm

  There is an option of dial-up telephone and in most of the carriers, the string * 99 * 1 # or * 99 # should work!

  Agic also this 3G database:
  http://APS2.toshiba-tro.de/WLAN/?page=3ghowto

• Temporary file needed for initialization could not be created

  Contracted a virus through FaceBook.  After spending a whole day, I resorted to format my C drive and do a clean reinstall of XP...

  Now, a BACK program I used for FOUR years with XP is run or re-install.

  I get the error message is:

  "A temporary file needed for initialization cannot be created or cannot be written to. Make sure that the directory path exists, and disk space is available.  "Choose close 'Close' to end the application.

  The directory path really exists and there is a lot of space.  I tried a program emulator BACK (DOS window), but it remains too small for me is not satisfactory.

  ANY GUIDANCE WOULD BE MOST APPRECIATED!

  "A temporary file needed for initialization cannot be created or cannot be written to. Make sure that the directory path exists, and disk space is available.  "Choose close 'Close' to end the application.

  This sounds like a custom environment variable that uses the program is no longer defined. The program requires the path to the variable of environment to write some TMP files. If you have a custom AutoExec.nt files, you can check out them for one or several SET commands.

  The program may also have an option (INI?) file. See if you can open in Notepad and check the paths you will find.

  Quite difficult to offer more or less an idea of what the program is or was created in.

• Cannot install Need For Speed: Shift 2 Microsoft Visual C++ Runtime Library Assertion failed!

  Original title: MsiExec install problem.

  ---------------------------
  Microsoft Visual C++ Runtime Library
  ---------------------------
  The assertion failed!

  Program: C:\WINDOWS\system32\MsiExec.exe
  File:.\CaCheckDiskSpace.cpp
  Online: 293

  Expression: 0

  For more information on how your program can cause an assertion
  failure, see the Visual C++ documentation on asserts

  (Press Retry to debug the application - JIT must be enabled)
  ---------------------------
  Abort Retry Ignore
  ---------------------------

  I am trying to install the new Need For Speed: Shift 2 and what is happening.

  What should I do?... I checked the installation on other computers, and it works, it's just my computer I guess.

  Thanks in advance ():

  Click on the link below to view the titles of Need for Speed that show to be compatible with Windows 7. It may not be a list complete, so you need to check on the manufacturer's website.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=need%20For%20Speed%3A%20Shift%202&page=1

  If it is not compatible, you can try and do a right click on the seutp.exe or .msi and select 'run as administrator '.

  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, you cannot run Windows XP mode, but you can try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  I hope this helps.

  Marilyn

• Need to understand what this command is

  I need to understand what this command does, it was on a router that I just picked up and I am familiar with this part of the order.

  IP nat inside source static tcp 192.168.5.201 mail_192.168.7 25 203.161.81.22 25-extensible route map

  I ask is because the customer has a scanner that sends scanned document via smtp to an off-site mail server which, in turn, sends mail to the user.  Before that, they used an internal e-mail server (. 201). What is mail users can go out and reach their destination.  However, any scanned mail does not work and I'm trying to understand why.  The scanner has an internal ip address, which is 192.168.5.25, the 192.168.5.201 is a mail server that was running and this command seems to be allow e-mail from the mail server (. 201) to send mail to another location through VPN tunnel to our other offices. What I'm trying to understand is the order indicating that the mail de.201 can go to the 192.168.7 network via the 203.161.81.22 port road 25.  If this is true who will stop mail from other devices out via 203.161.81.22 on port 25

  Hello jonl711

  As you know, do the NAT ports on a Cisco router, add a line for each of them, such as:

  IP nat inside source static tcp 192.168.5,201 25 X.X.X.X 25 - card expandable route

  Here we ¨nating¨ port 25 to the machine 192.168.5.201 in our network, where XXXX is the our public ip address.

  That said, here I explain what each command

  access-list 112 refuse host ip 192.168.5.201 192.168.1.0 0.0.0.255

  access-list 112 refuse host ip 192.168.5.201 192.168.7.0 0.0.0.255

  access ip-list 112 allow a whole

  --> Here you can create an access list who deny ip 192.168.5.201 go to 192.168.1.0 and 192.168.7.0

  mail_192.168.7 allowed 10 route map

  corresponds to the IP 112

  --> Here you create a ¨rule¨ to match the access list you created.

  IP nat inside source static tcp 192.168.5.201 mail_192.168.7 25 203.161.81.22 25-extensible route map

  --> and here you are mapping the IP 192.168.5.201 with port 25 (SMTP) that go outside with the IP 203.161.81.22 with port 25 (SMTP) and get a match with the road map

  Best regards and have a nice day

  Johnnatan Rodriguez Miranda

  If this answer is satisfactory to you, please mark it as response.

  Thank you

• I need help with a question command line syntax

  I got 3 issues that need to be entered in command line / syntax.
  I had no training in command line and need help for that setting in the command line syntax.
  (The IP address is a fact).
  This will be done also on a PC that requires elevated permissions. So if a programmer can zip through it in no time it would be much appreciated. Perhaps one without high and an example with.

  1 setting up daily ping test to a server with the IP 10.254.254.1 which will be composed of 1 000 ICMP echoes.
  2. establish daily ping tests to a server with the same IP address which will consist of one hundred 1 500 bytes ICMP packets.
  3 configure these run every day and are output to a text file.

  Hi Matt,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums.

  Please post your question in the Windows 7 IT Pro: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  Thank you.

• Why my CS6 apps show the need for an update?

  For some reason, in my drop down list creative cloud, my Adobe Photoshop CS6 and my Dreamweaver CS6 show that they must be updated.  I went through and got the error "U44M1P7" and found different solutions.  When I arrived at the Solution #2, I went to try to install the updates manually.  Out of curiosity, I made a command-I on the two applications to see what version I already had - and they are the same version as the last update.  So, in simple terms, the creative cloud app shows the need for an update, but according to the 'latest news', the last update is already installed.  Can someone tell me what could be the problem?  Thanks in advance - Scott

  Hi,

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Kind regards

  Sheena

• Request for documentation of design of San...

  This has been posted a few years back, but it seems that an adequate response was never given. Is there a documentation of the available industry regarding sizing and planning for the san.

  "3 SAN sizing - VMware has a range that exceeds not 32 VMs per LUN."

  If these are very used then extends over 100 mV per LUN, so virtual machines

  are not widely used. It is a very wide range. When sizing the

  performance, VMware shall provide the info to back up the above,

  that includes what was the LUN RAID level, size of the LUN, disk number by

  the LUN, disk speed, proc I/O maximum, etc. so that we know why, is to be

  has said. Example, I have a SAN with 1.3 TB of space - why can't be scratched,

  say 28 drives in RAID 10 and have 1 large LUN to accommodate 100 strongly

  servers used? What happens if the LUN has been scratched with RAID 4? Simple

  Guideline sponsor LUN sizing based on the number of PIN based

  RAID levels to evaluate the good design of performance for x number of virtual machines

  should not be asking for too much. »

  Thanks in advance.

  That's the thing about sizing of discs - there is no such thing as a recommendation of mat.

  Your sizing LUNS will be more often dependent on the characteristics of I/O you need for the device - IOPS / s, disk throughput, etc.  The number of virtual machines, you can reasonably put on a virtual machine will also be limited by these figures.  What I'm trying to do when my environments of sizing is to determine a PEAK base line (think that request here the worst case scenario - what happens if all VMs apps will go nuts on the disk at the same exact time) IOPS / s (this is usually the biggest bottleneck of disk - physical is a pain here) as the head on an axis can be in one place at the same time), understanding braces how much I need to meet that.  Once I know the number of batteries that my logic unit number has spread throughout, I can watch the overall size of the data store that I'll need.  Keep in mind not only disk sizing here, but also VM snapshots will be whether to use and for how long and also keep in mind the memory allocated to each of the virtual machines to plan for the dimensioning of the .vswp file.  Once I have calibration information, I can watch the split unit size on my storage array, I need to know how much divides satisfy both IO and size needs for the data store, and then create the LUN being mindful of the air RAID.  A rule of thumb that I still use, it's 1 physical pin provides me approximately 150 IOPS / s to work with.  This number is very conservative (and frankly a little old, but I have not looked to drive too deep in the last 3 years).  Also keep in mind that your LUN will share spindles (and so share IOPS / s) with the other LUNs, another activity on the storage Bay must therefore be taken into account during the design process as well.

  For example, if I have an environment with 10 applications, each with a peak Ops ES / s 500, I want finally to a LUN that would support 5000 IOPS / s.  In collaboration with my 150 IOPS / s as a rule, I would try to LUN covering 34 pins.  If each of the VMS has been configured with the virtual disks of 50 GB and 4 GB of RAM each, and I knew that the VMs would not have any how snapshots would be growing more than 10% of the size of the original virtual disk, I plan for 550 GB of disk space virtual/snapshot, 40 GB for the .vswp file and some overhead for the files of newspapers , the config and VMFS metadata, etc.  So I would to, say, a 600GB LUN.  At this point, my table of storage can support a LUN covering 34 pins of 600 GB?  It's a Go 17.6 divide size.  A compromise can do based on what you know of your application performance (peak load will happen all at once, or is the worst overall peak lower load?)  which could lead to a larger size of split and the axes less) or what you know of your storage array (split sizes are available more large and smaller than the calculations show - are you going with a split more small and more spindles, wasting available i/o, or do you take the large size of split with fewer pins) (, with the possibility to you of the IOPS / s starving or wasting valuable disk space).

  With regard to the maximum number of virtual machines that are placed on a specific data store, you would much more than 32 virtual machines on each, in large part because of the way VMFS file locking is maintained.  Each host locks files in the area of metadata for the VMFS data store.  The locks are updated periodically.  These updates and any other activity to update metadata, causes a lock of all SCSI device be maintained on the disk device.  Above 32 VMs highly used, metadata updates can easily keep the LUN in a locked state, preventing the VM disk i/o to occur.

  It is almost impossible to set up a vast document because the recommendations made to your environment are specific to your environment.  Of course, workloads between different stores are similar, but the subtleties of each shop means that any widespread recommendation as "build 500 GB LUN 10 batteries and put 15 VMs on them" would be overkill for 45% of stores to research and would be a disaster of performance for 45%, leaving a small 10% happy environments and a good comfort zone.

  Hope that makes some sense and helps.

  -jk

• What is the need for level 0 and level 1 backup?

  I am a bit confused about the need for level 0 and level 1 backup. Oracle has proposed strategy in 10g creates only level 1 backup continues to not to break and not to create any level of 0 after the first backup of level 0. But I had seen in the document Oracle Database Backup & Recovery basis he suggests to create backup of level 0 on weekly or monthly basis. There?
  
  Secondly according to my understanding when creating oracle backup of level 1 first creates a level 0 backup that contain also copies of data image files and then apply an incremental copies of the image, once the incremental backup is applied on the copy of the image you don't have to the previous incremental backups. Am I wrong?
  If I'm right, what is the difference between level 0 & backup of level 1? and after the level 0 backup you must also all previous backups.
  
  PL. help me to clarify my questions in this regard.
  
  Kind regards
  
  Vassallo

  What is the most reliable in terms of recovery?

  I do not see the differences in terms of recovery, the two strategies are reliable.

  There is an advantage in terms of recovery time expected, Oracle says:

  /*
  Incorporate gradually update the backup in your backup strategy shortens the time of recovery as provided. The reason is that media recovery right now or at some point in the recent past may begin at the time of the last backup of level 1 applied, rather than at the time of the last full database backup.
  */

  In a regular incremental backup strategy you always go back to a level 0 backup and then to apply everything follows level 1 backups + archivelogs. But - for an incremental backup set to day - it's a little tricky to emerging a window of recovery, normally relies on redundancy 1, i.e. that a backup is retained, you cannot go back, this type of backup is designed for a quick and complete recovery.

  But there is a solution (I don't think there is place in EM), even if you're on 10g, see the 11 g documentation, he explains fuller:

  http://download.Oracle.com/docs/CD/B28359_01/backup.111/b28270/rcmbckba.htm#BRADV89532

  Werner

• Need for iTunes Apple music?

  Need for iTunes Apple music?  Must I pay for the Apple's music run my iTunes now? Can I access, browse and download movies and music without the Apple music subscription?  I only asked because I was given a sound of music Apple upward when I tried to download a movie.

  Hello

  # Apple's music is not necessary. You can always buy music and videos on iTunes Store as before. Try going into Preferences > restriction and check Apple music.

  Jim

• I need for apple store in Thailand

  Please, I beg you. ! I need for apple store in Thailand

  คนไทยทุกคนที่ใช้ ผลิตภัณฑ์ ของ แอปเปิ้ล ต้องการให้ Apple Store มาเปิดที่สุดเลยครับ

  http://www.Apple.com/th-en/Shop/Browse/home_th_en

  This document was extracted from Google.   It may answer your question.   There are others, too.