CEP non-event programmer

Similar Questions

• java.lang.RuntimeException:pushModalScreen called by a thread of non-event

  I am trying to alert the message using Dialog.alert (). The following exception comes

  java.lang.RuntimeExceptionushModalScreen called by a thread of non-event

  When this error comes and what scenario?

  Thank you

  Bala

  you don't know. You can find the details in the developer's guide.

  However a short explanation:
  all user interface work is performed in a separate thread, the thread of the event.
  If you do something in the user interface, for example in the display method, the instance is already on the thread of the event.
  If you do something outdoors, for example in a separate thread, you must place your changes on the thread of the event.
  only the thread the event is allowed to change the user interface.

• BPEL and CEP (Complex Event Processing)

  Is there a possibility to integrate the Complex Event Processing with BPEL?
  
  For example - if some event occurred one to the CEP-part BPEL-part will be called.

  I'm not sure I understand your question, BPEL and CEP jms support out of the box, via adapters. When you install BPEL, the client API brings with it...

  Kind regards
  Yohanna.

• Referencing non-event source enum

  Hi all

  I want to take three dynamic stream of a triaxial accelerometer and reorganize who is x, y and z, based on overall accelerometer orientation so that the global axes remain the same, i.e. If I reposition the accelerometer so that its tip axis now in the global sense, 'z', ' y', I want that data to be bound to the z wire so that saved data is consistent. In the past, I just changed the name of the file, but this solution is quite clumsy, and I already know how this is not interesting.

  I have yet not done anything achievable, because I'm just confused so no example VI unfortunately. All I have is three emuns labeled x, y and z, each with x, y and z components of choice, as below:

  

  For example, I put the x enum item in there. I want the item there should be disabled for enums y and z, and I want the input data x to link to the output data stream there. If I choose a second and then the third element enum is forced. It sounds simple and I could do in order using the nested structures case but it's not very flexible at all. I had a go with a structure of the event, but I can't find a way of disabling items in two enumerations that are not the source of the event, and then I have to return the actual stream. I thought the elements should be disabled in a table and using a FGV within a structure of the case, but I found myself with some problems regardless of how I approached it.

  I'm not necessarily looking for complete solutions, but it would be good to have some fresh insight and ideas so that I can have a go myself.

  Thanks in advance!

  IDT

  Hi idt.

  I think you have misunderstood the table that you are inputing in the disabled items property. The disabled items property disables the values that are the indices of the table you fed into it. As you have supplied an initial array of 3 you select the 0th element, which is in this case, 0 x three times and turn it off. If you remove the constant matrix on the left of your loop, this will be illustrated by the fact x should no longer be disabled when executing your VI

  Kind regards

• the cloud tendina creative sul desktop e bloccata in carica, so apre e if hot my bianca e vuota, non è nessun programma da installare e

  the cloud tendina creative sul desktop e bloccata in carica, so apre e so hot my bianca e e vuota, non è nessun di programs list da installare

  WHITE cloud screen http://forums.adobe.com/message/5484303 can help

  - and step by step http://forums.adobe.com/thread/1440508?tstart=0

  - and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

• Help a non - AS3 programmer

  I m a PHP developer and donot program in AS3, but as you know the developers I understand little AS3 without having read his help. But because I'm not an expert in AS3 I m in trouble now. Please forgive my stupidity.

  I have a fla file, which is essentially a work. The main screen of the flash software looks to below.

  

  After asking 10 questions (it's the end of the work), he calls a file called "shared_assets.swf" (there is a file in the server called "shared_assets.swf", but this isn't the problem). Now my guess is that called "shared_assets.swf" should be in the AS3 script (because there are a lot of other file embedded in swf which are resources I think, rite?), but even after having checked each script, strangely, I don't see any call to 'shared_assets.swf '. Please see the preview below to see all the scripts. I saw all the scripts of ' Actions: frame 1' to ' Actions: frame 207' but there is no clear call to "shared_assets.swf".

  

  My question is simple ' you guys can tell me where the call to 'shared_assets.swf' is be done?

  Thank you very much. Please help me I need to complete my project.

  Based on the upper left of the second picture that show you, it's possible that you use AS1 or AS2 instead of AS3.  You can confirm which version in the Flash of the publication settings section and see which version is specified.  If you use AS1/2, it is possible the code you are looking for is attached to buttons or other objects.  To see if this is the case, you must select the object on the stage, while the Actions panel is open to see if there are any code attached.

  AS3 does not allow to join the code, so all the code will be either in deadlines (peek inside movieclips as well) or separate .as files.

• Request for lack of events/heart beat

  Hi all
  
  I'm trying to monitor network packets I send to a specific ip address and also check if I sent packages for that IP special at regular intervals (something like a heartbeat). I transfer the wireshark network output to a csv file and reading in PART with csv adapter.
  
  In order to check for missing events/heart beat (this is used to check if a server responds to the ping at all hours), I followed this link
  Re: CEP non-event programmer and
  [http://docs.oracle.com/cd/E21764_01/doc.1111/e14476/examples.htm]
  I configured the PART. This is the query that I'm shooting
  
  SELECT Packets.ipdst AS ipdst, Packets.ipsrc AS ipsrc, Packets.framelen AS framelen, 'Error-Missing event' AS alertType
  of FilterNetworkPackets
  () MATCH_RECOGNIZE
  PARTITION BY ipdst
  MEASURES Ipdst_Packets.ipdst AS ipdst,
  Ipdst_Packets.ipsrc AS ipsrc,
  Ipdst_Packets.framelen AS framelen
  ALL MATCHES
  include timer events
  MODEL (Ipdst_Packets *)
  DURATION 10 DEFINE Ipdst_Packets AS ipdst = "xx.xx.xx.xx")
  As packages
  
  I have configured heartbeat (10000) on both inlet channel.
  
  I get output in which some packages are repeated. I don't know how to obtain a missing event notification once the elapsed time, please help me.
  Thanks in advance
  Shilpa

  Hello

  The output you get is infact the notification you receive when there is no event with 173.194.5.140 for 10 seconds.

  for example, the first exit.
  OutputBean:onEvent() eventType = RequiredMailFields object plus RequiredMailFields ki
  ND = null time = 696477423597 ipsrc is 192.168.0.10, ipdst = 173.194.5.140.
  elt_time = 686477423597, framelen = 5, alertType = error-Missing event isTotalOrderGuarantee = false

  Elt_time here's the moment where the event happened and time is the time associated with the output. If you subtract elt_time of time, you will notice that, for each of the output, the difference is 10 * 10 ^ 9 nanos = 10 seconds. So the output above should be interpreted as "no case with ipdst = 173.194.5.140 arrived 10 seconds after the event with framelen = 5' and therefore the notification is generated.

  You don't see any output event that has framelen = 3, because after the framelen = 3 entrance arrived, the following entry (with framelen = 5) for this partition arrived before the 10 seconds duration expired.

  According to your requirement, it seems that you need some sort of indication in both cases:
  (1) whenever an event happens with this ip address - will mark the beginning of the green line
  (2) when any does happen for 10 seconds to this ip address after receiving an event for this ip address - will mark the beginning of the red line

  I think you can model this as follows:

  review from normalEvents:

  Select ipdst as ipdst, ipsrc as ipsrc, framelen as framelen, 'The Normal event' as alertType, ELEMENT_TIME as elt_time from FilterNetworkPackets

  Discover the missedEvents: (the existing query - added ALL clause MATCHES MULTIPLE so that you get one out every 10 seconds until the next event happens for this partition)

  SELECT Packets.ipdst AS ipdst, Packets.ipsrc AS ipsrc, Packets.framelen AS framelen, 'Error-Missing event' AS alertType, Packets.elt_time AS elt_time
  of FilterNetworkPackets
  MATCH_RECOGNIZE
  (
  PARTITION BY ipdst
  MEASURES
  Ipdst_Packets.ipdst AS ipdst,
  Ipdst_Packets.ipsrc AS ipsrc,
  Ipdst_Packets.framelen AS framelen,
  Ipdst_Packets.ELEMENT_TIME AS elt_time
  ALL MATCHES
  include timer events
  MODEL (Ipdst_Packets) DURATION MULTIPLES OF 10
  DEFINE Ipdst_Packets AS ipdst = "173.194.5.140") AS packages

  AllEvents query:
  Select * from (normalEvents union missedEvents)

  On the release of the 'allEvents' query, based on the "alertType" of the event, you can trigger appropriate treatment in the bean output.

  Concerning

  Published by: Mary on March 30, 2012 12:26

• The Panel buttons before manipulation within a structure of event

  Is there an easy way to manage buttons on the front panel within a structure of the event? I am currently using a structure of the event to bring up a settings tab, but I can only use the buttons that are designated as events. Is it possible to use non-event buttons to perform a sequence of installation and calibration within a structure of the event?

  I'm not sure that understand your question. From what you describe, you should look into an architecture of producer consumer where your event loop receives an event, and then transfers part of the work to do in the loop of consumption. This keeps your event loop free to receive events. LabVIEW 2012 comes with a good example of this, the message queue manager model project of waiting.

• is authorized to build the screen over the events, but push over the event

  Hi all, I know it's a lame question, but I get an error message and now then guess myself

  the way I coded this app. I usually build screens in a non event, calling thread

  Add when adding fields and all the UI stuff, but once it is done, then I put the pushScreen

  in the case of threading

  is it ok?

  Well, it is certainly not a "lame".  I guess you can add fields to a form on a thread of non-event so the screen is not "displayed" (do not push in the battery of the screen still), otherwise, you will need to run that add inside invokeLater or while now the lock of the event.

  Say, if you pushScreen (MyCustomBackgroundCreatedScreen()) new, some of the screen building code can be executed before the screen is actually pushed and the rest will be executed after that.  The "suite" party (whose actual start is quite random) will throw IllegalStateException unless you put your add code (...) within invokeLater or synchronize the lock of the event.

  I did it myself - parses an XML file in a separate Thread and by creating and adding fields one by one to a display manager - and I distinctly remember having to do it the way I described.

  If it's OK or not depends on your design.  If you have only a few fields to add, that's fine, I guess.  Each addition will cause the entire screen to rearrange, which is a small performance decrease. However, unless you have a few fields of thousands (I remember this post here in the forum), you should not notice a significant slowdown.

• Store events in the various tables / AVG function error

  Hello
  
  I have a very newbie question that I can't solve.
  
  I want to store events in a database, well, but if I set the events on the context like this file:
  
  < wlevs:event - type-repository >
  < wlevs:event - type the type name 'Averages' = >
  < wlevs:properties >
  < name wlevs:property = "average_Generator1_ActivePower" type = "float" / >
  < name wlevs:property = "sum_Generator2_ActivePower" type = "int" / >
  < name wlevs:property = "max_Substation_Active_Power" type = "int" / >
  < name wlevs:property = "number_events" type = "int" / >
  < / wlevs:properties >
  < / wlevs:event - type >
  < wlevs:event - type the type name = "WindEvent" >
  < wlevs:properties >
  < name wlevs:property = "generator1_ActivePower" type = "int" / >
  < name wlevs:property = "generator2_ActivePower" type = "int" / >
  < name wlevs:property = "substation_Active_Power" type = "int" / >
  < / wlevs:properties >
  < / wlevs:event - type >
  < / wlevs:event - type-repository >
  
  They will be stored at the same table, TupleValues table.
  
  I'm trying to work around this situation by defining one of the events as a class, and in this case the CEP Oracle create another table to store the event. But with this Setup, I have an error on the processor node, more exactly, in the avg function that use a property of the created class. Below it is the context, the class of java and the query file in the processor
  
  Class #Java
  
  public class WindEvent {}
  
  private Generator1_ActivePower entire;
  private Generator1_AverageExpectedEnergy entire;
  private Generator2_ActivePower entire;
  private Generator2_AverageExpectedEnergy entire;
  private Substation_Active_Power entire;
  private Substation_AverageExpectedEnergy entire;
  
  
  file #context
  
  < wlevs:event - type-repository >
  < wlevs:event - type the type name = "WindEvent" >
  < wlevs: class > oracle.cep.demo.events.WindEvent < / wlevs: class >
  < / wlevs:event - type >
  < / wlevs:event - type-repository >
  
  < wlevs: adapt id = "adapter" provider = "csvgen" >
  < wlevs:listener ref = 'channel' / >
  < wlevs:instance - name of the property = 'port' value = "9001" / >
  < wlevs:instance - name of the property = "eventTypeName" value = "WindEvent" / >
  < wlevs:instance - name of the property = "eventPropertyNames."
  value = "generator1_ActivePower, generator1_AverageExpectedEnergy, generator2_ActivePower, generator2_AverageExpectedEnergy, substation_Active_Power, substation_AverageExpectedEnergy" / >
  
  < / wlevs: adjust >
  
  < wlevs: channel id = 'string' - type event = "WindEvent" >
  < wlevs:listener ref = "processor" / >
  < / wlevs: channel >
  
  < wlevs:processor id = "processor" >
  < / wlevs:processor >
  
  
  #query
  
  < processor >
  processor < name > < / name >
  < rules >
  < request id = "ExampleQuery" >
  <! [CDATA [select avg (substation_Active_Power) got max_Substation_Active_Power, count (*) as number_events of the channel [line 60]]] >
  < / query >
  < / rules >
  < / processor >
  
  If someone could help him in both questions, I'll be very grateful

  Keep your definition of class as -

  public class WindEvent {}

  private Generator1_ActivePower entire;
  private Generator1_AverageExpectedEnergy entire;
  private Generator2_ActivePower entire;
  private Generator2_AverageExpectedEnergy entire;
  private Substation_Active_Power entire;
  private Substation_AverageExpectedEnergy entire;

  }

  In other words, use integer instead of int.

  Then, change the query for-

  Select avg (* substation_Active_Power.intValue () *) as avg_Substation_Active_Power, count (*) as number_events of the channel [line 60]

• 'Circular session context Logger Kernal' was able to start with the following error: 0xC0000035

  I hope it helps someone as it has been a persistent problem for some time at least six months. I did the research almost as long and also a solution for this, but I'm done here as a last resort. My question to had is that I believe that this occurs at the start of most of the time with the system, but can occur later also is originally the system will block also up and we have four other systems here that this was never a problem at all. I'm still looking and I hope to find an answer somewhere with out having to do a complete clean reinstall 7. I looked here for answers and met several all through the web, including here none have solved the problem.  I would be grateful at least someone leading me in the right direction on this issue if you can.

  Hope this is the right place to post also. If this isn't the case, please advise.

  Journal name:

  Source:

  Date:

  Event ID:

  Microsoft - Windows - Kernel-also racingl Admin
  Microsoft - Windows-Kernel-EventTracing

  02/06/2013 -07:59:57

  2

  Task category: Session

  Level: error

  Keywords: Session

  User: SYSTEM

  Computer: BarbKeenan-bail

  Description:

  Session "circular kernel context Logger" was able to start with the following error:

  OxC0000035
  EventXmI:

  
  

  BDB6-4648-BC92-F3FDC74D3CA2}">I >
  2

  O

  2

  2

  12
  Ox80000000000000 1 O

  I >
  2713

  I >

  I >
  Microsoft-Windows-Kernel-EventTracing/Admin
  BarbKeenan - bail

  I >

  
  

  Kernel context Logger circular
  

  3221225525
  268436608

  
  

  For what it's worth, I have this error periodically on several Windows 7 systems.

  She seem to be a non-event and does cause some system problems.

  I don't think that your freezing problem is caused by the present.

  However, take a look at this thread.

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/2eab69ac-7537-40c4-916e-6f6d41c05d4b

• UiApplication using PopupScreen

  Hi all

  This is my first post on this amazing forum. I read through many large threads with lots of answers to the questions I had in my short time developing applications for the BlackBerry smartphone. Unfortunately, I hit my first stumbling block, which I'm sure will be very easy, but hey, we all start somewhere.

  The question that I'm doing the experience simply creates a PopupScreen in the mainevent thread and wait for user input before continuing. In my days of Swing I just use an observable model and notify the application of change, but I seem to have trouble with this concept here. I tried to use the pushModalScreen and the pushGlobalScreen of the UiApplication class methods, but both give me a runtime... error pushGlobalScreen called by thread of non-event.

  It seems to me missing something probably just in front of me, but I would appreciate help on this. I just use this example using the 9000 Simulator that is packed with the JDE v4.6

  public static void main(String[] args) {
          MyApp app = new MyApp();
          app.enterEventDispatcher();
      }
  
      MyApp() {
          final PromptTest prompt = new PromptTest();
          invokeLater(new Runnable() {
              public void run() {
                  pushGlobalScreen(prompt,1,UiApplication.GLOBAL_MODAL);
              }
          });
          continueProcess();
      }
  
      public void continueProcess() {
      // do something with input from PopupScreen
      }
  }
  

  Thank you.

  Well, I'm a little bit embarrassed. I have solved my problem. Using just pushScreen, like any other approach and all simply migrate code to deal with in my fieldChangeListener. I don't know what I thought earlier. I'm sorry to have lost someone's time on this one.

• Call Dialog.ask in the Thread Run method

  "in I want to call Dialog.alert and using following code but its exception to throw the wire.

  "Exception occurs java.lang.RuntimeException: pushModalScreen called by a thread of non-event."

  synchronized (Application.getEventLock ())

  {

  if (Dialog.ask ("catalog is obsolete. You want to keep it? ", choices, select, select [0])(==1)"

  {

  Run the required functionality

  }

  }

  pls help me

  I keep saying this, so forgive me of repeating myself, but:

  synchronized (Application.getEventLock ()) {}

  should only be used when nothing else will work for you or you make a very simple, very fast UI update.

  A Dialog.ask is not very fast!

  In this case, you have several options, but the most obvious solution is to ask the question before starting the Thread.  So, if that is your treatment

  Thread catUpdateThread = new Thread() {}

  public void run() {}

  Dialog.ask (...)

  Other treatments

  }

  }

  catUpdateThread.start ();

  What should do the same and works OK. :

  UiApplication.getUiApplication.invokelater (new Runnable() {}

  public void run() {}

  Dialog.ask (...)

  If (result == Yes) {}

  Thread catUpdateThread =...;

  catUpdateThread... Start();

  }

  }

  });

• Problem chart/getting updated when you press on the background thread notification dialog box

  I have a user who is graphical reports strange behviour after our request and only under the following condiitions alarms:

  1 sets of users clock back to trigger the alarm

  2 user locked the BB

  3. the user receives alarm 1 minute later

  4. the user unlocks the BB

  The strange behavior is that the background seems to resemble a back buffer bland with a rectangular hole where the notification dialog box should be.  The user clicks then the graphics and where the button should be back to normal.

  The question is not if the user does not lock the BB first - it's only under the condition of deadlock that the problem occurs.  The user statement also sometimes see a dialog "Please wait" when running our application after unlocking, but never when our application is stopped.

  Model is 8310 with 4.5 and approximately 3 MB of free space depending on the situation-> filefree.

  The dialog box is to be generated and added to the queue by a background thread using the following method:

      private void notifyUser(String msg) {
          UiEngine ui = Ui.getUiEngine();
          EncodedImage icon = Theme.getIcon(false, true);
          Bitmap bm = null;
          if (icon != null) {
              bm = icon.getBitmap();
          } else {
              bm = Bitmap.getPredefinedBitmap(Bitmap.EXCLAMATION);
          }
          synchronized (Application.getEventLock()) {
              Screen screen = new Dialog(Dialog.D_OK, msg, Dialog.OK, bm, Manager.VERTICAL_SCROLL);
              ui.pushGlobalScreen(screen, 1, UiEngine.GLOBAL_SHOW_LOWER);
          }
      }
  

  I checked the problem does not occur on the "BOLD", Pearl Flip, or 8100 with real hardware.  The problem never happens in simulators (tried about 6 models).

  Any thoughts?  Is there something wrong with the code above or spark a dialogue for a non-event like this thread?

  Thanks in advance...

  The workaround for the "locked" State is to implement MemoryCleanerListener in your main application class. This listener is notified when the device is locked. We define a property here "deviceWasLocked", then query this property of our custom popup dialog to determine if we arrive on a locked screen.

  Then we switch our application in the foreground (requestForeground) that clears up this particular issue, and any event goes well.

  The problem of 'missed calls' is a little more complicated, unfortunately, but you're not complaining that one!

  Having said all this, I'd love to see other ideas on how to solve this problem. We strugggled for several weeks with this problem when the 4.3 is released.

• How can I display several rows using Horizonatal and vertical field Manager

  Hello

  can someone tell me how I can layout my screen using HorizonatalFieldManager and VerticalFieldManager.

  I want to display the image and text as below:

  Image1 Text1

  Image2 Text2

  image3 Text3

  I have try several times but she can throw the exception of unacaught,.

  can u give me some examples like him.

  I also store image by default when the url does not contain any image

  It works with FlowField but it see as below:

  image1 image2 Text2 Text1

  image3, image4 Text4 Text3

  I don't want to, I want to show as first mention.

  now I work at bb jde 4.6 and I want to support 4.6 and later

  (1) are you IllegalStateException? It's normal if you try to manipulate anything on the screen of a non-event thread stack. If it is another exception, display the details here.

  (2) for your layout, you need a separate HFM for each pair of text-image. Like this:

  VerticalFieldManager vfm = new VerticalFieldManager(VERTICAL_SCROLL ...);
  for (i = 0; i < length; ++i) {
    HorizontalFieldManager hfm = new HorizontalFieldManager();
    hfm.add(new Label(text[i]));
    hfm.add(new BitmapField(image[i]));
    vfm.add(hfm);
  }
  add(vfm);
  

  If you add all of this to a screen with "no argument" constructor (there VERTICAL_SCROLL by default), you can ignore the optimization of resources and add your HFMs directly on-screen.