CF8 Developer: debug output?
I have CF8 Developer Edition installed on my Vista Business PC.I tried to put the debug output on (in the ColdFusion - Debgiing & logging admin), but I get no results.
On my old PC (CF7 Developer Edition on Windows XP), I had no problem to set this up.
Any idea?
Thank you
Sorry, I found the solution:
In the ColdFusion Administrator - Debugging & Logging, I deleted the list of IP addresses, and now it works.
(empty list means: send the output to all users)
Tags: ColdFusion
Similar Questions
-
Using Qt-Creator 2.6 (beta) on mac and I don't get any debug output
Hello
I decided to try to get Qt-creator goes on mac for my boyfriend, so it can develop its dev-alpha and playbook.
Finely, I must see the dev-alpha, it has frozen several times and had other problems with vkb etc... very frustrating! lol well I always wish that I had a...
in any case, here is the mistake of Qt-creator:
Cannot show debug output. Error: Botan library exception: PK_Verifier: No working engine for RSA
I chose the gdb to
/Applications/bbndk/host_10_0_9_52/darwin/x86/usr/bin/ntoarm-gdb
Everything else seems to work very well.
Any suggestions would be greatly appreciated!
See you soon,.
Jon
I learned today that this problem has been fixed in the Qt Creator 2.6 branch.
See https://bugreports.qt-project.org/browse/QTCREATORBUG-7985 and https://codereview.qt-project.org/#change, 35987 for more details.
-
HP Slate 7 more 4200CA: using slate 7 more 4200 CA in Developer Debug Mode
I would use my slate 7 more in developer Debug Mode. I did the secret tap the Build number on the screen on the Tablet 5 times to enable developer mode and check the box for USB debugging, but the required driver is not properly installed on the device to connect to my Windows 7 PC.
You kindly provide me with the necessary driver as well as instructions for manual installation. I tried all the solutions on this forum, but nothing works.
I managed to get the ADB driver installed for the 7 slate more. I went to this link:
http://h30434.www3.HP.com/T5/Android/ADB-drivers/m-p/2574571/highlight/true
I followed instructions such as defined below, without the modifacations re PID as recommended by the other link. The pilot was then installed and works well.
1. Please use this command to add
echo 0x03F0 > > %HOMEPATH%\.android\adb_usb.ini
2 and find the android_winusb.inf driver Google USB which is located in the < sdk > \extras\google\usb_driver\.
Add sub sections and save it.
; HP
% SingleAdbInterface % = USB_Install, USB\VID_03F0 & PID_5E1D
% CompositeAdbInterface % = USB_Install, USB\VID_03F0 & PID_5D1D & MI_01
% CompositeAdbInterface % = USB_Install, USB\VID_03F0 & PID_601D & MI_013. installation manual driver for the device in Device Manager.
After all this is done, restart the ADB service to check the device (adb devices)
Thank you for your help.
Best regards
-
IPsec VPN Phase 2 does not. Need help with the debug output
Is someone can you please tell me why I can't establish ipsec Phase 2 negotiations. I'm trying to connect a 2651XM to a Pix 501.
Here are the isakmp debug and release of ipsec and configs. I checked the keys are the same. And sets of transformations look ok. No idea why its not working?
What is the bottom tell me?
===========================================================
01:32:37: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
01:32:37: ISAKMP:(0:2:SW:1): IPSec policy invalidated proposal
01:32:37: ISAKMP:(0:2:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
01:32:37: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
01:32:37: ISAKMP:(0:2:SW:1): IPSec policy invalidated proposal
01:32:37: ISAKMP:(0:2:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
===============================================================================
ISAKMP (0): start Quick Mode Exchange, M - ID - 1154286426:bb32fca6
crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
ISAKMP (0): processing NOTIFY payload Protocol 14 2
SPI 2224366689, message ID = 1503891776
ISAKMP (0): removal of spi 1629787524 message ID = 3140680870
to return to the State is IKMP_NO_ERR_NO_TRANS
pixfirewall #.
pixfirewall # sh crypto is
ISAKMP (0): start Quick Mode Exchange, M - ID 400184159:17da535f
crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
ISAKMP (0): processing NOTIFY payload Protocol 14 2
SPI 2649583861, message ID = 1778335964 a.
ISAKMP (0): removal of spi 4117818781 message ID = 400184159
status code returned is IKMP_NO_ERR_NO_TRANSkmp its
Total: 1
Embryonic: 0
Src DST in the meantime created State
1.1.1.2 1.1.1.3 QM_IDLE 0 0
pixfirewall #.
ISAKMP (0): start Quick Mode Exchange, M - ID 923039456:370476e0
crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
ISAKMP (0): processing NOTIFY payload Protocol 14 2
SPI 2163779852, message ID = 2746774364
ISAKMP (0): removal of spi 212465792 message ID = 923039456
to return to the State is IKMP_NO_ERR_NO_TRANSexiClosure of session
CCC cryp #sh
CCC #sh crypto isakmp his
status of DST CBC State conn-id slot
1.1.1.2 1.1.1.3 QM_IDLE 1 0 ACTIVECCC #ping 192.168.1.1
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.1, time-out is 2 seconds:
.....
Success rate is 0% (0/5)CCC #ping 192.168.1.5
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:
.....
Success rate is 0% (0/5)
CCC #debug isakmp crypto
Crypto ISAKMP debug is on
CCC #debug crypto ipsec
Crypto IPSEC debugging is on
Crypto CCC talkative #debug
detailed debug output debug is on
CCC #ping 192.168.1.5Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:
.....
Success rate is 0% (0/5)
CCC #.
00:51:24: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:51:24: ISAKMP: node set 1268073006 to QM_IDLE
00:51:24: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 1268073006
00:51:24: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 1268073006
00:51:24: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:24: ISAKMP: turn 1, AH_SHA
00:51:24: ISAKMP: attributes of transformation:
00:51:24: ISAKMP: program is 1 (Tunnel)
00:51:24: ISAKMP: type of life in seconds
00:51:24: ISAKMP: life of HIS (basic) of 28800
00:51:24: ISAKMP: type of life in kilobytes
00:51:24: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:24: ISAKMP: authenticator is HMAC-SHA
00:51:24: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:24: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:24: ISAKMP: turn 1, ESP_3DES
00:51:24: ISAKMP: attributes of transformation:
00:51:24: ISAKMP: program is 1 (Tunnel)
00:51:24: ISAKMP: type of life in seconds
00:51:24: ISAKMP: life of HIS (basic) of 28800
00:51:24: ISAKMP: type of life in kilobytes
00:51:24: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:24: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:24: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:24: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:24: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:51:24: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:51:24: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:51:24: ISAKMP: node set-429221146 to QM_IDLE
00:51:24: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-429221146
00:51:24: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:51:24: ISAKMP: (0:1:SW:1): purge the node-429221146
00:51:24: ISAKMP: (0:1:SW:1): node 1268073006 REAL reason «QM rejec» error suppression
Ted. "
00:51:24: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node 1268073006: status = IKE_QM_READY
00:51:24: ISAKMP: (0:1:SW:1): entrance, node 1268073006 = IKE_MESG_FROM_PEER, IKE_QM_
EXCH
00:51:24: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:51:24: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart
with 1.1.1.3
00:51:54: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:51:54: ISAKMP: node set-500877443 to QM_IDLE
00:51:54: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID =-500877443
00:51:54: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID =-500877443
00:51:54: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:54: ISAKMP: turn 1, AH_SHA
00:51:54: ISAKMP: attributes of transformation:
00:51:54: ISAKMP: program is 1 (Tunnel)
00:51:54: ISAKMP: type of life in seconds
00:51:54: ISAKMP: life of HIS (basic) of 28800
00:51:54: ISAKMP: type of life in kilobytes
00:51:54: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:54: ISAKMP: authenticator is HMAC-SHA
00:51:54: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:54: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:54: ISAKMP: turn 1, ESP_3DES
00:51:54: ISAKMP: attributes of transformation:
00:51:54: ISAKMP: program is 1 (Tunnel)
00:51:54: ISAKMP: type of life in seconds
00:51:54: ISAKMP: life of HIS (basic) of 28800
00:51:54: ISAKMP: type of life in kilobytes
00:51:54: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:54: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:54: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:54: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:54: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:51:54: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:51:54: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:51:54: ISAKMP: node set-701693099 to QM_IDLE
00:51:54: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-701693099
00:51:54: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:51:54: ISAKMP: (0:1:SW:1): purge the node-701693099
00:51:54: ISAKMP: (0:1:SW:1): node-500877443 error suppression REAL reason "QM rejec.
Ted. "
00:51:54: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node-500877443: State = IKE_QM_READY
00:51:54: ISAKMP: (0:1:SW:1): entrance, node-500877443 = IKE_MESG_FROM_PEER, IKE_QM_
EXCH
00:51:54: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:52:14: ISAKMP: (0:1:SW:1): purge the node 1268073006
CCC #sh crypto isakmp his
status of DST CBC State conn-id slot
1.1.1.2 1.1.1.3 QM_IDLE 1 0 ACTIVECCC #ping 192.168.1.5
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:00:52:44: ISAKMP: (0:1:SW:1): purge node-500877443...
00:52:50: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:52:50: ISAKMP: node set 1186613650 to QM_IDLE
00:52:50: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 1186613650
00:52:50: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 1186613650
00:52:50: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:52:50: ISAKMP: turn 1, AH_SHA
00:52:50: ISAKMP: attributes of transformation:
00:52:50: ISAKMP: program is 1 (Tunnel)
00:52:50: ISAKMP: type of life in seconds
00:52:50: ISAKMP: life of HIS (basic) of 28800
00:52:50: ISAKMP: type of life in kilobytes
00:52:50: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:52:50: ISAKMP: authenticator is HMAC-SHA
00:52:50: ISAKMP: (0:1:SW:1): atts are acceptable.
00:52:50: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:52:50: ISAKMP: turn 1, ESP_3DES
00:52:50: ISAKMP: attributes of transformation:
00:52:50: ISAKMP: program is 1 (Tunnel)
00:52:50: ISAKMP: type of life in seconds
00:52:50: ISAKMP: life of HIS (basic) of 28800
00:52:50: ISAKMP: type of life in kilobytes
00:52:50: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:52:50: ISAKMP: (0:1:SW:1): atts are acceptable.
00:52:50: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:52:50: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.1.68.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:52:50: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:52:50: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:52:50: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:52:50: ISAKMP: node set-1113601414 to QM_IDLE
00:52:50: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-1113601414
00:52:50: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:52:50: ISAKMP: (0:1:SW:1): purge the node-1113601414
00:52:50: ISAKMP: (0:1:SW:1): node 1186613650 REAL reason «QM rejec» error suppression
Ted. "
00:52:50: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node 1186613650: status = IKE_QM_READY
00:52:50: ISAKMP: (0:1:SW:1): entrance, node 1186613650 = IKE_MESG_FROM_PEER, IKE_QM_
EXCH
00:52:50: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:52:50: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart
with 1.1.1.3.
Success rate is 0% (0/5)
CCC #.
00:53:20: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:53:20: ISAKMP: node set 459446741 to QM_IDLE
00:53:20: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 459446741
00:53:20: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 459446741
00:53:20: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:53:20: ISAKMP: turn 1, AH_SHA
00:53:20: ISAKMP: attributes of transformation:
00:53:20: ISAKMP: program is 1 (Tunnel)
00:53:20: ISAKMP: type of life in seconds
00:53:20: ISAKMP: life of HIS (basic) of 28800
00:53:20: ISAKMP: type of life in kilobytes
00:53:20: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:53:20: ISAKMP: authenticator is HMAC-SHA
00:53:20: ISAKMP: (0:1:SW:1): atts are acceptable.
00:53:20: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:53:20: ISAKMP: turn 1, ESP_3DES
00:53:20: ISAKMP: attributes of transformation:
00:53:20: ISAKMP: program is 1 (Tunnel)
00:53:20: ISAKMP: type of life in seconds
00:53:20: ISAKMP: life of HIS (basic) of 28800
00:53:20: ISAKMP: type of life in kilobytes
00:53:20: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:53:20: ISAKMP: (0:1:SW:1): atts are acceptable.
00:53:20: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:53:20: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:53:20: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:53:20: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:53:20: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:53:20: ISAKMP: node set-1692074376 to QM_IDLE
00:53:20: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-1692074376
00:53:20: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:53:20: ISAKMP: (0:1:SW:1): purge the node-1692074376
00:53:20: ISAKMP: (0:1:SW:1): REAL reason for node deletion 459446741 error "reject QM.
Ed ".
00:53:20: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node 459446741: status = IKE_QM_READY
00:53:20: ISAKMP: (0:1:SW:1): entrance, node 459446741 = IKE_MESG_FROM_PEER, IKE_QM_E
XCH
00:53:20: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:53:40: ISAKMP: (0:1:SW:1): purge the node 1186613650
00:53:42: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, chang
State of Ed down
00:54:10: ISAKMP: (0:1:SW:1): purge the node 459446741===============================================================================
6.2 (2) version PIX
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate 8Ry2YjIyt7RRXU24 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
pixfirewall hostname
domain ciscopix.com
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol 2000 skinny
names of
permit 192.168.1.0 ip access list outside_cryptomap_20 255.255.255.0 10.10.10.0
255.255.255.0
permit 192.168.1.0 ip access list inside_outbound_nat0_acl 255.255.255.0 10.10.1
255.255.255.0 0.0
pager lines 24
interface ethernet0 10baset
interface ethernet1 10full
Outside 1500 MTU
Within 1500 MTU
1.1.1.3 outside IP address 255.255.255.0
IP address inside 192.168.1.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 10.10.10.0 255.255.255.0 inside
location of PDM 10.10.10.0 255.255.255.0 outside
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Route outside 0.0.0.0 0.0.0.0 1.1.1.2 1
Timeout xlate 0:05:00
Timeout conn 0 half-closed 01:00:10: 00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 TR
p 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
No sysopt route dnat
Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
outside_map 20 ipsec-isakmp crypto map
card crypto outside_map 20 match address outside_cryptomap_20
card crypto outside_map 20 peers set 1.1.1.2
card crypto outside_map 20 game of transformation-Petaluma_VPN
outside_map interface card crypto outside
ISAKMP allows outside
ISAKMP key * 1.1.1.2 address netmask 255.255.255.255 No.-xauth No.-config-m
Ode
part of pre authentication ISAKMP policy 20
ISAKMP policy 20 3des encryption
ISAKMP policy 20 md5 hash
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 86400
Telnet timeout 5
SSH timeout 5
dhcpd address 192.168.1.5 - 192.168.1.33 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
dhcpd allow inside
Terminal width 80
Cryptochecksum:8c0d4948407071d3515f1546cf8bc147
: end
pixfirewall #.
=========================================================================
CCC #sh run
Building configuration...Current configuration: 1328 bytes
!
version 12.4
horodateurs service debug uptime
Log service timestamps uptime
no password encryption service
!
CCC host name
!
boot-start-marker
start the system flash c2600-adventerprisek9 - mz.124 - 25d.bin
boot-end-marker
!
!
No aaa new-model
no location network-clock-participate 1
No network-clock-participate wic 0
IP cef
!
!
!
!!
!
!
crypto ISAKMP policy 2
BA 3des
md5 hash
preshared authentication
Group 2
address key crypto isakmp 1.1.1.3 cisco123
!
!
Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
!
map Petaluma_1 1 ipsec-isakmp crypto
defined peer 1.1.1.3
game of transformation-Petaluma_VPN
match address 100
!
!
!
!
interface FastEthernet0/0
1.1.1.2 IP 255.255.255.0
automatic speed
Half duplex
!
interface Serial0/0
no ip address
Shutdown
clock speed of 56000
!
interface FastEthernet0/1
10.10.10.2 IP address 255.255.255.0
automatic duplex
automatic speed
card crypto Petaluma_1
!
IP forward-Protocol ND
IP route 192.168.1.0 255.255.255.0 1.1.1.3
!
!
no ip address of the http server
no ip http secure server
!
access-list 100 permit ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255
control plan
!
!
!
!
!
!
!
!
!
!
Line con 0
line to 0
line vty 0 4
opening of session
!
!
endCCC #.
!
!
!
crypto ISAKMP policy 2
BA 3des
md5 hash
preshared authentication
Group 2
address key crypto isakmp 1.1.1.3 cisco123
!
!
Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
!
map Petaluma_1 1 ipsec-isakmp crypto
defined peer 1.1.1.3
game of transformation-Petaluma_VPN
match address 100
!
!
!
!
interface FastEthernet0/01.1.1.2 IP 255.255.255.0
automatic speed
Half duplex
!
interface Serial0/0
no ip address
Shutdown
clock speed of 56000
!
interface FastEthernet0/1
10.10.10.2 IP address 255.255.255.0
automatic duplex
automatic speed
card crypto Petaluma_1
!
IP forward-Protocol ND
IP route 192.168.1.0 255.255.255.0 1.1.1.3
!
!
no ip address of the http server
no ip http secure server
!
access-list 100 permit ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255Hi David,
Overlooking the configuration of the router, it seems that you have applied the encryption card to the wrong interface.
interface FastEthernet0/0
1.1.1.2 IP 255.255.255.0
automatic speed
Half duplex
!
interface FastEthernet0/1
10.10.10.2 IP address 255.255.255.0
automatic duplex
automatic speed
card crypto Petaluma_1
Given that the pix will attempt to build a VPN tunnel to 1.1.1.2 map encryption Petaluma_1 must be applied to FastEthernet0/0, not FastEthernet 0/1.
Let me know if it helps.
Thank you
Loren
-
What is good JDev/SQLDev Setup for development/debugging extensions
What are appropriate measures for JDeveloper to facility for developing/debugging Sql Developer extensions? Refer to a link from doc, if any.
What specific combinations of Jdeveloper and Sql 4 developer + are supported?
The combination that I use (see below) generates serious errors of 200 + during the definition of the 'target platform' of a new project of extension to my installation Sql Dev 4 +.
1 the JDev and extension versions I use do support the version of Sql Developer as a target "platform in JDeveloper for building/test/debugging extensions?
2. If it is not then "what specific combinations of JDev and Sql Dev are supported?
3. If so, then maybe there's a bug in JDev or Sql Dev about the compliance OSGi or version reports.
Already posted this in the Sql Developer forum.
https://community.Oracle.com/thread/3544323
Received a response from the Sql Dev PM but he did not address the issues and the specific problem because I already do what was suggested it:
<: section >
Development of Extensions for Oracle JDeveloper 12 c (12.1.2) - summary
http://www.Oracle.com/ocom/groups/public/@OTN/documents/WEBCONTENT/131167.XML#Oracle.JDeveloper.esdk
You'll want this SDK
12.1.2.0.40.66.68 Oracle.JDeveloper (min = 12.1.2.0.40.66.68 , max = 12.1.2.0.40.66.68 ) The goal is to be able to set breakpoints and debug normal while the development and test of extensions for sql developer. Can I use JDeveloper to compile/deploy a jar extension can run sql developer and install it, but this isn't an effective way to create/test/debugging code.
1. os - Windows XP SP3
2 Sql Developer 32 bit - Version 4.0.0.13
Build a HAND - 13.80
3 JDeveloper 32 bit - Build JDEVADF_12.1.2.0.0_GENERIC_130608.2330.6668
((4 JDeveloper downloaded installed using: a) jdev_suite_121200_win32.exe, b).
esdk_bundle_12.1.2.0.40.66.68.zip
5 has created a new extension project
6 tried to affect 'Platform target' sql developer
a. - manage - the-platform target project properties add sql developerMore than 200 serious mistakes (see the other thread for samples):
a. the major part have been associated to ' orai18n - collation.jar'
b. a half - doze or so "system property jdbc.library.
3. a "system property xdb.library.
4. two to "Unable to parse clear jar of extension.
I would expect JDeveloper to check the "target platform' for OSGi compatibility and version before trying to import it as a"target platform.
Same bug exists when you use the last Sql Developer version 4.0.1.14.48 as the target platform.
Jeff Smith, Sql Dev PM, responded in this way in the thread I posted in this forum:
And a bigger problem is that you use JDev12.1.2? B/c SQL Dev 4 is built on the top of 12.1.3
12.1.3 JDeveloper has NOT been made public that I can find.
Q - JDeveloper 12.1.2 does support using Sql Developer as a target "platform for an extension on 32-bit Windows project?
----------------
-Updated 19:43 by rp0428
----------------
John McGinnis has been authorized to provide the definitive answer from the point of view Sql Developer Team in this forum:
JDeveloper provides a design environment for the creation of new extensions. However, this environment designtime is created by and maintained by the team of JDeveloper. SQL Developer team has limited entry in there and we don't have any control over the target "SQL Developer" it provides. Unfortunately, JDeveloper 12.1.2 is the latest version of JDeveloper which is offered to the customers, and there are several significant changes to the configuration of products between 12.1.2 and 12.1.3 which affect the extensions. There is no version of the developer SQL which was delivered using JDeveloper 12.1.2 then the target of "SQL Developer" for extensions in JDeveloper 12.1.2 doesn't really work for the creation of significant extensions.
Just a heads up to the JDeveloper team who can run through this thread.
As part of the public release of JDeveloper 12.1.3 I hope there will be some sort of statement of support using Sql Developer as a target "platform for developing extensions.
I will definitely test this version when it is released and will transfer at this time, if there are problems.
I'm marking this question ANSWER because since then, based on the response of Johns, I'm not sure that any other 'official' answer can be given for the moment.
But the comments or additions would be more than welcome.
-
My suddnely of CF9 server stopped showing debug output. Debug output is set to Yes and I have the correct ip address. I even tried < cfsetting showDebugOutput = "true" >, but nothing appears. Any ideas?
Found the problem. When upgrading to Windows 10, the prioritised card vpn setting the IP Address of the server instead of my local ip. I tried to use the DHCP protocol listed in ipconfig for VPN, but it did not work. Then, I changed the setting of the adapter for the VPN connection to use my local IP address and it worked.
-
Hey,.
I'm creating XML and generated by coldfusion debug output causes an error. I tried to put < cfsetting showdebugoutput = 'no' > at the top of my page and the error was always popping up. I then called my server host and had them off manually the output of debut, and the error still showed upward.
The question is how can I know that the error is caused by debugging output Coldfusion... Here's the ugliness which, to my knowledge, is exclusively from this output
So two questions arise:
(1) this output can be caused by another source? (and I have checked all my data in the XML)
(2) what can I do to get rid of this output
Thank youJust as a note, I'm attacked using a different method, I just put all the information as a string and use XMLFormat for nodes... and it worked. There is no error thrown, he ran through the entire script, and then they threw the XML error. Regarding the old code, I've trashed it, thanks to the entry however.
-
Not appearing debug output is not with cfmodule
Hi, I have a problem here I just can't solve. I have a unique model that contains the code in my header and footer called globalheader.cfm which gives the floor to cfmodule (see the code example below). Everything works, the only problem is that the debug output appear not. Debugging is enabled correctly and presents itself if I remove the tag to cfmodule call globalheader.cfm. Any help would be greatly appreciated.Thank you! It wasn't the answer, but it lead me to it!
The culprit was the cfcontent tag. I used it to remove the white space. I didn't know it would affect the output of debug too. I commented and now I see Debugging.
-
I have installed the edition of CFMX 8 Dev, enabled the debug output, but the output is not displayed. I can access the web pages, but cannot see the output of debuh.
Any ideas on how to solve this problem?Don't know why, but it is fixed. Just reinstalled CF 8, reset the debug settings and now it works.
-
CF8 developer Ed install hangs
When I try to install CF8 Developer edition, the installation crashes just after that you choose which language and click go. It is located on the next page with the status bar almost over, but then nothing happens. I'm trying to install on Win 2 k 3 Server. I got the beta version of the Scorpion which worked well. I ended up manually remove Scorpion, when I tried to install CF8 and had problems. Someone knows something I could try before you give up and go back to MX 7?I finally got 8 installed CF. He did hang the DLL registration, but I just finished the process through the Task Manager and installation (continued) and everything seems to work at this stage. Thanks to everyone who helped me, I couldn't have done it without all of the suggestions.
-
Write Debug Output to the media under the Simulator map
I'm testing my application using the Simulator with the eclipse plugin (using the simulated device 9700). Simply, I can't open a file. Here is the code I use:
try { // filename = "file:///SDCard/debug.txt" fileConnection = (FileConnection) Connector.open(fileName); } catch (IOException e) { System.out.println("Could not create " + fileName); e.printStackTrace(); } if (fileConnection != null) { try { OutputStream out = fileConnection.openOutputStream(); } catch (IOException e) { e.printStackTrace(); } }Are there settings specific Simulator which must be defined and who could stop me from writing on the SD card in the device? I put 'Use PC file to SD Card file system' and with the path on my PC where I want the file resides. Any help would be greatly appreciated.
The file exists in your file? If it isn't, your code does not indicate that you create a file.
So when you try to open an output stream on a file that does not exist, that would not work.
Steps to follow:
-Check if a file exists
-Yes: Open stream and write to the file
-No: fileConnection.create)
-Open the stream and write to the file
PS Don't forget to close the flow of data and file connection when you are finished.
-
Hi all
I use the new version of the developer 4.0.1.14 on Windows 7 x 64, I noticed that the result of the query or the output of the script does not display as before:
When I run a query lets say with 100 lines of output, run the query successfully, but the cursor jumps automatically to the last record in the game as in all previous versions, I have to scroll manually everytime.
Can I change this?
Thank you
No, unfortunately, it's a bug.
It is not for all queries however. Still boring.
-
After using IMAQ RT Video Out, how to return to the string of rt debugging output?
After having used the video on VI IMAQ RT, the screen image as expected. Then, I want to return to the display console where I can see the RT Debug channels and the processor. Is this possible?
Infinite,.
The previous answer is incorrect. It is possible to change the mode back to text video. Just use the "IMAQ out video display Mode" VI for the parameter "Text Mode". This should restore the display of text.
-Eric
-
Is there a way to determine what the virtual machine and JVM exit orders mean in the output of the JDE window?
As far as I know there is no official documentation on which codes and messages.
-
I can't get the installation configuration CF8 see the Web server on my Win XP SP 2 computer running IIS 5.5.
This prevents a successful installation of the CF8 server.
I am quite at a loss here.
I disabled Windows Firewall and antivirus application on the local computer.
I am trying for my installs is own attemps and there is nothing else I know who would be CF8 prebent to see the Web server.
Please help adobe.
This box is where I hope to make real money with CF8 and Flex. ;-))))) $$$$$$$
Thanks in advance.
GeneI had a pain on this one, but I thought I'd answer because I posted on it without any result.
Here is the solution.
I went into IIS and saw that the Web server did NOT work.
This was not seen in any other part of the Windows operating system that made me think that it was a problem of progromatic.
I did everything:
Close the windows firewall, looked in the event where Viewer, stop the anti virus, & looked in the registry.
Yes it makes me feel like a newbee, but at least I must confess that I can still learn.You say, what have you learned?
I say, follow through - like a good golf swing offers the ball on the fairway to put you in position on the second and the third shot to score.Thank you
Gene
Maybe you are looking for
-
How is it all my all appointments in the calendar were removed from my new 128 Gb Iphone 6 S more?
-
Anyone know how to disable MacKeeper and MegaBackup? I don't want these two things continue to run in groups. I tried to close and then down in the activity monitor, but it did not work. Thank you.
-
This hotfix is classified as a fix for visual c 2005/2008 - even if the C library runtime are installed on Windows 2000, but when this hotfix is installed on a Windows 2000 it will not break windows 2000 as kernel32.dll does not contain the entry poi
-
Nice day I have a bunch of files that are located on a network computer that has a shared parent directory. I need to create a shortcut to the .exe which are in each directory. There are more than 1000 directories, so the creation of all the shortc
-
Where can I find this "default Administrator"?
I have never seen anything or anywhere on my computer, even remotely close to 'administrator by default'. I've always been the admin for what it has been for 6 months + last. I can only use my standard user account. Whenever I try to do everything I