ColdFusion MX 8 Debug Output

I have installed the edition of CFMX 8 Dev, enabled the debug output, but the output is not displayed. I can access the web pages, but cannot see the output of debuh.

Any ideas on how to solve this problem?

Don't know why, but it is fixed. Just reinstalled CF 8, reset the debug settings and now it works.

Tags: ColdFusion

Similar Questions

Disable debug output
Hey,.

I'm creating XML and generated by coldfusion debug output causes an error. I tried to put < cfsetting showdebugoutput = 'no' > at the top of my page and the error was always popping up. I then called my server host and had them off manually the output of debut, and the error still showed upward.

The question is how can I know that the error is caused by debugging output Coldfusion... Here's the ugliness which, to my knowledge, is exclusively from this output

So two questions arise:
(1) this output can be caused by another source? (and I have checked all my data in the XML)
(2) what can I do to get rid of this output

Thank you
Just as a note, I'm attacked using a different method, I just put all the information as a string and use XMLFormat for nodes... and it worked. There is no error thrown, he ran through the entire script, and then they threw the XML error. Regarding the old code, I've trashed it, thanks to the entry however.

CF8 Developer: debug output?
I have CF8 Developer Edition installed on my Vista Business PC.
I tried to put the debug output on (in the ColdFusion - Debgiing & logging admin), but I get no results.

On my old PC (CF7 Developer Edition on Windows XP), I had no problem to set this up.

Any idea?
Thank you

Sorry, I found the solution:
In the ColdFusion Administrator - Debugging & Logging, I deleted the list of IP addresses, and now it works.

(empty list means: send the output to all users)

Using Qt-Creator 2.6 (beta) on mac and I don't get any debug output

Hello

I decided to try to get Qt-creator goes on mac for my boyfriend, so it can develop its dev-alpha and playbook.

Finely, I must see the dev-alpha, it has frozen several times and had other problems with vkb etc... very frustrating! lol well I always wish that I had a...

in any case, here is the mistake of Qt-creator:
```
Cannot show debug output. Error: Botan library exception: PK_Verifier: No working engine for RSA
```
I chose the gdb to
```
/Applications/bbndk/host_10_0_9_52/darwin/x86/usr/bin/ntoarm-gdb
```
Everything else seems to work very well.

Any suggestions would be greatly appreciated!

See you soon,.

Jon

I learned today that this problem has been fixed in the Qt Creator 2.6 branch.

See https://bugreports.qt-project.org/browse/QTCREATORBUG-7985 and https://codereview.qt-project.org/#change, 35987 for more details.

IPsec VPN Phase 2 does not. Need help with the debug output

Is someone can you please tell me why I can't establish ipsec Phase 2 negotiations. I'm trying to connect a 2651XM to a Pix 501.

Here are the isakmp debug and release of ipsec and configs. I checked the keys are the same. And sets of transformations look ok. No idea why its not working?

What is the bottom tell me?

===========================================================

01:32:37: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2

01:32:37: ISAKMP:(0:2:SW:1): IPSec policy invalidated proposal

01:32:37: ISAKMP:(0:2:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)

Mote 1.1.1.3)

01:32:37: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2

01:32:37: ISAKMP:(0:2:SW:1): IPSec policy invalidated proposal

01:32:37: ISAKMP:(0:2:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)

Mote 1.1.1.3)

===============================================================================

ISAKMP (0): start Quick Mode Exchange, M - ID - 1154286426:bb32fca6
crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
ISAKMP (0): processing NOTIFY payload Protocol 14 2
SPI 2224366689, message ID = 1503891776
ISAKMP (0): removal of spi 1629787524 message ID = 3140680870
to return to the State is IKMP_NO_ERR_NO_TRANS
pixfirewall #.
pixfirewall # sh crypto is
ISAKMP (0): start Quick Mode Exchange, M - ID 400184159:17da535f
crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
ISAKMP (0): processing NOTIFY payload Protocol 14 2
SPI 2649583861, message ID = 1778335964 a.
ISAKMP (0): removal of spi 4117818781 message ID = 400184159
status code returned is IKMP_NO_ERR_NO_TRANSkmp its
Total: 1
Embryonic: 0
Src DST in the meantime created State
1.1.1.2 1.1.1.3 QM_IDLE 0 0
pixfirewall #.
ISAKMP (0): start Quick Mode Exchange, M - ID 923039456:370476e0
crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
ISAKMP (0): processing NOTIFY payload Protocol 14 2
SPI 2163779852, message ID = 2746774364
ISAKMP (0): removal of spi 212465792 message ID = 923039456
to return to the State is IKMP_NO_ERR_NO_TRANSexi

Closure of session

CCC cryp #sh
CCC #sh crypto isakmp his
status of DST CBC State conn-id slot
1.1.1.2 1.1.1.3 QM_IDLE 1 0 ACTIVE

CCC #ping 192.168.1.1

Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.1, time-out is 2 seconds:
.....
Success rate is 0% (0/5)

CCC #ping 192.168.1.5

Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:
.....
Success rate is 0% (0/5)
CCC #debug isakmp crypto
Crypto ISAKMP debug is on
CCC #debug crypto ipsec
Crypto IPSEC debugging is on
Crypto CCC talkative #debug
detailed debug output debug is on
CCC #ping 192.168.1.5

Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:
.....
Success rate is 0% (0/5)
CCC #.
00:51:24: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:51:24: ISAKMP: node set 1268073006 to QM_IDLE
00:51:24: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 1268073006
00:51:24: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 1268073006
00:51:24: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:24: ISAKMP: turn 1, AH_SHA
00:51:24: ISAKMP: attributes of transformation:
00:51:24: ISAKMP: program is 1 (Tunnel)
00:51:24: ISAKMP: type of life in seconds
00:51:24: ISAKMP: life of HIS (basic) of 28800
00:51:24: ISAKMP: type of life in kilobytes
00:51:24: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:24: ISAKMP: authenticator is HMAC-SHA
00:51:24: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:24: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:24: ISAKMP: turn 1, ESP_3DES
00:51:24: ISAKMP: attributes of transformation:
00:51:24: ISAKMP: program is 1 (Tunnel)
00:51:24: ISAKMP: type of life in seconds
00:51:24: ISAKMP: life of HIS (basic) of 28800
00:51:24: ISAKMP: type of life in kilobytes
00:51:24: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:24: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:24: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:24: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:24: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:51:24: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:51:24: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:51:24: ISAKMP: node set-429221146 to QM_IDLE
00:51:24: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-429221146
00:51:24: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:51:24: ISAKMP: (0:1:SW:1): purge the node-429221146
00:51:24: ISAKMP: (0:1:SW:1): node 1268073006 REAL reason «QM rejec» error suppression
Ted. "
00:51:24: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node 1268073006: status = IKE_QM_READY
00:51:24: ISAKMP: (0:1:SW:1): entrance, node 1268073006 = IKE_MESG_FROM_PEER, IKE_QM_
EXCH
00:51:24: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:51:24: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart
with 1.1.1.3
00:51:54: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:51:54: ISAKMP: node set-500877443 to QM_IDLE
00:51:54: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID =-500877443
00:51:54: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID =-500877443
00:51:54: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:54: ISAKMP: turn 1, AH_SHA
00:51:54: ISAKMP: attributes of transformation:
00:51:54: ISAKMP: program is 1 (Tunnel)
00:51:54: ISAKMP: type of life in seconds
00:51:54: ISAKMP: life of HIS (basic) of 28800
00:51:54: ISAKMP: type of life in kilobytes
00:51:54: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:54: ISAKMP: authenticator is HMAC-SHA
00:51:54: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:54: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:54: ISAKMP: turn 1, ESP_3DES
00:51:54: ISAKMP: attributes of transformation:
00:51:54: ISAKMP: program is 1 (Tunnel)
00:51:54: ISAKMP: type of life in seconds
00:51:54: ISAKMP: life of HIS (basic) of 28800
00:51:54: ISAKMP: type of life in kilobytes
00:51:54: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:54: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:54: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:54: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:54: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:51:54: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:51:54: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:51:54: ISAKMP: node set-701693099 to QM_IDLE
00:51:54: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-701693099
00:51:54: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:51:54: ISAKMP: (0:1:SW:1): purge the node-701693099
00:51:54: ISAKMP: (0:1:SW:1): node-500877443 error suppression REAL reason "QM rejec.
Ted. "
00:51:54: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node-500877443: State = IKE_QM_READY
00:51:54: ISAKMP: (0:1:SW:1): entrance, node-500877443 = IKE_MESG_FROM_PEER, IKE_QM_
EXCH
00:51:54: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:52:14: ISAKMP: (0:1:SW:1): purge the node 1268073006
CCC #sh crypto isakmp his
status of DST CBC State conn-id slot
1.1.1.2 1.1.1.3 QM_IDLE 1 0 ACTIVE

CCC #ping 192.168.1.5

Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:

00:52:44: ISAKMP: (0:1:SW:1): purge node-500877443...
00:52:50: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:52:50: ISAKMP: node set 1186613650 to QM_IDLE
00:52:50: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 1186613650
00:52:50: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 1186613650
00:52:50: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:52:50: ISAKMP: turn 1, AH_SHA
00:52:50: ISAKMP: attributes of transformation:
00:52:50: ISAKMP: program is 1 (Tunnel)
00:52:50: ISAKMP: type of life in seconds
00:52:50: ISAKMP: life of HIS (basic) of 28800
00:52:50: ISAKMP: type of life in kilobytes
00:52:50: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:52:50: ISAKMP: authenticator is HMAC-SHA
00:52:50: ISAKMP: (0:1:SW:1): atts are acceptable.
00:52:50: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:52:50: ISAKMP: turn 1, ESP_3DES
00:52:50: ISAKMP: attributes of transformation:
00:52:50: ISAKMP: program is 1 (Tunnel)
00:52:50: ISAKMP: type of life in seconds
00:52:50: ISAKMP: life of HIS (basic) of 28800
00:52:50: ISAKMP: type of life in kilobytes
00:52:50: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:52:50: ISAKMP: (0:1:SW:1): atts are acceptable.
00:52:50: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:52:50: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.1.68.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:52:50: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:52:50: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:52:50: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:52:50: ISAKMP: node set-1113601414 to QM_IDLE
00:52:50: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-1113601414
00:52:50: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:52:50: ISAKMP: (0:1:SW:1): purge the node-1113601414
00:52:50: ISAKMP: (0:1:SW:1): node 1186613650 REAL reason «QM rejec» error suppression
Ted. "
00:52:50: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node 1186613650: status = IKE_QM_READY
00:52:50: ISAKMP: (0:1:SW:1): entrance, node 1186613650 = IKE_MESG_FROM_PEER, IKE_QM_
EXCH
00:52:50: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:52:50: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart
with 1.1.1.3.
Success rate is 0% (0/5)
CCC #.
00:53:20: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:53:20: ISAKMP: node set 459446741 to QM_IDLE
00:53:20: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 459446741
00:53:20: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 459446741
00:53:20: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:53:20: ISAKMP: turn 1, AH_SHA
00:53:20: ISAKMP: attributes of transformation:
00:53:20: ISAKMP: program is 1 (Tunnel)
00:53:20: ISAKMP: type of life in seconds
00:53:20: ISAKMP: life of HIS (basic) of 28800
00:53:20: ISAKMP: type of life in kilobytes
00:53:20: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:53:20: ISAKMP: authenticator is HMAC-SHA
00:53:20: ISAKMP: (0:1:SW:1): atts are acceptable.
00:53:20: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:53:20: ISAKMP: turn 1, ESP_3DES
00:53:20: ISAKMP: attributes of transformation:
00:53:20: ISAKMP: program is 1 (Tunnel)
00:53:20: ISAKMP: type of life in seconds
00:53:20: ISAKMP: life of HIS (basic) of 28800
00:53:20: ISAKMP: type of life in kilobytes
00:53:20: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:53:20: ISAKMP: (0:1:SW:1): atts are acceptable.
00:53:20: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:53:20: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:53:20: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:53:20: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:53:20: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:53:20: ISAKMP: node set-1692074376 to QM_IDLE
00:53:20: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-1692074376
00:53:20: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:53:20: ISAKMP: (0:1:SW:1): purge the node-1692074376
00:53:20: ISAKMP: (0:1:SW:1): REAL reason for node deletion 459446741 error "reject QM.
Ed ".
00:53:20: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node 459446741: status = IKE_QM_READY
00:53:20: ISAKMP: (0:1:SW:1): entrance, node 459446741 = IKE_MESG_FROM_PEER, IKE_QM_E
XCH
00:53:20: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:53:40: ISAKMP: (0:1:SW:1): purge the node 1186613650
00:53:42: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, chang
State of Ed down
00:54:10: ISAKMP: (0:1:SW:1): purge the node 459446741

===============================================================================

6.2 (2) version PIX

ethernet0 nameif outside security0

nameif ethernet1 inside the security100

activate 8Ry2YjIyt7RRXU24 encrypted password

2KFQnbNIdI.2KYOU encrypted passwd

pixfirewall hostname

domain ciscopix.com

fixup protocol ftp 21

fixup protocol http 80

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

fixup protocol they 389

fixup protocol rsh 514

fixup protocol rtsp 554

fixup protocol smtp 25

fixup protocol sqlnet 1521

fixup protocol sip 5060

fixup protocol 2000 skinny

names of

permit 192.168.1.0 ip access list outside_cryptomap_20 255.255.255.0 10.10.10.0

255.255.255.0

permit 192.168.1.0 ip access list inside_outbound_nat0_acl 255.255.255.0 10.10.1

255.255.255.0 0.0

pager lines 24

interface ethernet0 10baset

interface ethernet1 10full

Outside 1500 MTU

Within 1500 MTU

1.1.1.3 outside IP address 255.255.255.0

IP address inside 192.168.1.1 255.255.255.0

alarm action IP verification of information

alarm action attack IP audit

location of PDM 10.10.10.0 255.255.255.0 inside

location of PDM 10.10.10.0 255.255.255.0 outside

PDM logging 100 information

history of PDM activate

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0-list of access inside_outbound_nat0_acl

NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

Route outside 0.0.0.0 0.0.0.0 1.1.1.2 1

Timeout xlate 0:05:00

Timeout conn 0 half-closed 01:00:10: 00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 TR

p 0:30:00 sip_media 0:02:00

Timeout, uauth 0:05:00 absolute

GANYMEDE + Protocol Ganymede + AAA-server

RADIUS Protocol RADIUS AAA server

AAA-server local LOCAL Protocol

Enable http server

http 192.168.1.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

SNMP-Server Community public

No trap to activate snmp Server

enable floodguard

Permitted connection ipsec sysopt

No sysopt route dnat

Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des

outside_map 20 ipsec-isakmp crypto map

card crypto outside_map 20 match address outside_cryptomap_20

card crypto outside_map 20 peers set 1.1.1.2

card crypto outside_map 20 game of transformation-Petaluma_VPN

outside_map interface card crypto outside

ISAKMP allows outside

ISAKMP key * 1.1.1.2 address netmask 255.255.255.255 No.-xauth No.-config-m

Ode

part of pre authentication ISAKMP policy 20

ISAKMP policy 20 3des encryption

ISAKMP policy 20 md5 hash

20 2 ISAKMP policy group

ISAKMP duration strategy of life 20 86400

Telnet timeout 5

SSH timeout 5

dhcpd address 192.168.1.5 - 192.168.1.33 inside

dhcpd lease 3600

dhcpd ping_timeout 750

dhcpd outside auto_config

dhcpd allow inside

Terminal width 80

Cryptochecksum:8c0d4948407071d3515f1546cf8bc147

: end

pixfirewall #.

=========================================================================

CCC #sh run
Building configuration...

Current configuration: 1328 bytes
!
version 12.4
horodateurs service debug uptime
Log service timestamps uptime
no password encryption service
!
CCC host name
!
boot-start-marker
start the system flash c2600-adventerprisek9 - mz.124 - 25d.bin
boot-end-marker
!
!
No aaa new-model
no location network-clock-participate 1
No network-clock-participate wic 0
IP cef
!
!
!
!

!

!

!

crypto ISAKMP policy 2

BA 3des

md5 hash

preshared authentication

Group 2

address key crypto isakmp 1.1.1.3 cisco123

!

!

Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des

!

map Petaluma_1 1 ipsec-isakmp crypto

defined peer 1.1.1.3

game of transformation-Petaluma_VPN

match address 100

!

!

!

!

interface FastEthernet0/0

1.1.1.2 IP 255.255.255.0

automatic speed

Half duplex

!

interface Serial0/0

no ip address

Shutdown

clock speed of 56000

!

interface FastEthernet0/1

10.10.10.2 IP address 255.255.255.0

automatic duplex

automatic speed

card crypto Petaluma_1

!

IP forward-Protocol ND

IP route 192.168.1.0 255.255.255.0 1.1.1.3

!

!

no ip address of the http server

no ip http secure server

!

access-list 100 permit ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255

control plan
!
!
!
!
!
!
!
!
!
!
Line con 0
line to 0
line vty 0 4
opening of session
!
!
end

CCC #.

!
!
!
crypto ISAKMP policy 2
BA 3des
md5 hash
preshared authentication
Group 2
address key crypto isakmp 1.1.1.3 cisco123
!
!
Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
!
map Petaluma_1 1 ipsec-isakmp crypto
defined peer 1.1.1.3
game of transformation-Petaluma_VPN
match address 100
!
!
!
!
interface FastEthernet0/0

1.1.1.2 IP 255.255.255.0
automatic speed
Half duplex
!
interface Serial0/0
no ip address
Shutdown
clock speed of 56000
!
interface FastEthernet0/1
10.10.10.2 IP address 255.255.255.0
automatic duplex
automatic speed
card crypto Petaluma_1
!
IP forward-Protocol ND
IP route 192.168.1.0 255.255.255.0 1.1.1.3
!
!
no ip address of the http server
no ip http secure server
!
access-list 100 permit ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255

Hi David,

Overlooking the configuration of the router, it seems that you have applied the encryption card to the wrong interface.

interface FastEthernet0/0

1.1.1.2 IP 255.255.255.0

automatic speed

Half duplex

!

interface FastEthernet0/1

10.10.10.2 IP address 255.255.255.0

automatic duplex

automatic speed

card crypto Petaluma_1

Given that the pix will attempt to build a VPN tunnel to 1.1.1.2 map encryption Petaluma_1 must be applied to FastEthernet0/0, not FastEthernet 0/1.

Let me know if it helps.

Thank you

Loren

debug output is not

My suddnely of CF9 server stopped showing debug output. Debug output is set to Yes and I have the correct ip address. I even tried < cfsetting showDebugOutput = "true" >, but nothing appears. Any ideas?

Found the problem. When upgrading to Windows 10, the prioritised card vpn setting the IP Address of the server instead of my local ip. I tried to use the DHCP protocol listed in ipconfig for VPN, but it did not work. Then, I changed the setting of the adapter for the VPN connection to use my local IP address and it worked.

Not appearing debug output is not with cfmodule
Hi, I have a problem here I just can't solve. I have a unique model that contains the code in my header and footer called globalheader.cfm which gives the floor to cfmodule (see the code example below). Everything works, the only problem is that the debug output appear not. Debugging is enabled correctly and presents itself if I remove the tag to cfmodule call globalheader.cfm. Any help would be greatly appreciated.
Thank you! It wasn't the answer, but it lead me to it!

The culprit was the cfcontent tag. I used it to remove the white space. I didn't know it would affect the output of debug too. I commented and now I see Debugging.

Write Debug Output to the media under the Simulator map

I'm testing my application using the Simulator with the eclipse plugin (using the simulated device 9700). Simply, I can't open a file. Here is the code I use:
```
try {   // filename = "file:///SDCard/debug.txt"
    fileConnection = (FileConnection) Connector.open(fileName);
} catch (IOException e) {
    System.out.println("Could not create " + fileName);
    e.printStackTrace();
}

if (fileConnection != null) {
    try {
        OutputStream out = fileConnection.openOutputStream();
    } catch (IOException e) {
        e.printStackTrace();
    }
}
```
Are there settings specific Simulator which must be defined and who could stop me from writing on the SD card in the device? I put 'Use PC file to SD Card file system' and with the path on my PC where I want the file resides. Any help would be greatly appreciated.

The file exists in your file? If it isn't, your code does not indicate that you create a file.

So when you try to open an output stream on a file that does not exist, that would not work.

Steps to follow:

-Check if a file exists

-Yes: Open stream and write to the file

-No: fileConnection.create)

-Open the stream and write to the file

PS Don't forget to close the flow of data and file connection when you are finished.

After using IMAQ RT Video Out, how to return to the string of rt debugging output?

After having used the video on VI IMAQ RT, the screen image as expected. Then, I want to return to the display console where I can see the RT Debug channels and the processor. Is this possible?

Infinite,.

The previous answer is incorrect. It is possible to change the mode back to text video. Just use the "IMAQ out video display Mode" VI for the parameter "Text Mode". This should restore the display of text.

-Eric

JDE debug output

Is there a way to determine what the virtual machine and JVM exit orders mean in the output of the JDE window?

As far as I know there is no official documentation on which codes and messages.

Device-debug output?

Hello NDK devs.

We are trying track down a bug only release device. It seems that symbols are either generated not be loaded by GDB. We use a build managed Momentics. All the parameters or manual control of GDB for this?

Thank you!

Stéphane

Ridicule me. G adding options to the compiler and the linker for the target it's done.

getJSON application using ColdFusion proxy

I'm following this article by Ben Nadel - do not know if there is some other better tutorials out there. In any case, I kept getting the Variable ALLARTICLESDATA is not defined. error.
< script type = "text/javascript" >
Run when the DOM is ready.
$(function() {})
jForms var = $(le «formulaire»);
Connect the form.
() jForm.submit
function (objEvent) {}
Get the Owl knowledge items.
GetArticles();
Prevent default.
Return (false) End Function
});
});
This method performs cross-site AJAX
using a ColdFusion proxy page.
function GetArticles() {}
{$('#searharea').keyup (function ()}
var searchField = $('#searharea').val ();
var myExp = new RegExp (searchField, "i");
$.getJSON('ajaxProxy-KB.cfm', {proxyURL: 'https://app.knowledgeowl.com/api/head/article.json', )
name: {}
$regex: searchField.
$options: "I."
}},
{function (Data)}
Console.log (data.valid, data.data); Data.Data is an array of information!
output var = ' < ul class = "search results" > ";
$(data.data, fonction (i, article) {} .each)
output += '< li > ";
" output += ' < h5 > < a href =" https://kb.mysite.com/help/pdfexport/id/'+ article.id + ' "> ' + article.name + ' < / h5 > '; "
output += "< /li >";
});
output += '< /ul > ";
$('#resultarea').html (output);
}); get JSON
});
}
< /script >
< cfoutput >
< section class = 'block' >
< ul class = "tabs" >
< li > < a href = "# tab1" > Search < /a > < /li >
< li > < a href = "# tab2" > Article < /a > < /li >
< li > < a href = "# tab 3" > class < /a > < /li >
< /ul >
< section id = "tab1" >
< input type = "text" id = "searharea" name = "searcharea" placeholder = "Search the article name" > < / input >
< div id = "resultarea" > < / div >
< / item >
< section id = "tab2" >
< cfif! IsJSON (allArticlesData) >
< h3 > The URL you requested does not valid JSON < / h3 >
< cfelse >
< cfset allArtData = DeserializeJSON (allArticlesData) >
< cfif structKeyExists (allArtData, 'data') >
< cfloop index = "i" = "1" to = "#arrayLen (allArtData.data) #" >
" < h5 > < a href =" https://KB.mysite.com/help/pdfexport/ID/#allArtData.Data [i] user.user # "> #allArtData.data [i] .name # < /a > < / h5 > .
< / cfloop >
< / cfif >
< / cfif >
< / item >
< section id = "3" tab >
< cfif! IsJSON (cateData) >
< h3 > The URL you requested does not valid JSON < / h3 >
< cfelse >
< cfset cfDJData = DeserializeJSON (cateData) >
< cfif structKeyExists (cfDJData, 'data') >
< cfloop index = "i" = "1" to = "#arrayLen (cfDJData.data) #" >
< h5 > #cfDJData.data [i] .name #-#cfDJData.data [i] user.user # < / h5 >
< / cfloop >
< / cfif >
< / cfif >
< / item >
< / section >
< / cfoutput >
And here is my proxy page.
<!--
Check if the page request is a POST or a GET.
On this basis, we can understand our target URL.
->
< cfif (CGI.request_method EQ "get") >
<!-based on a URL get target url. ->
< cfset strTargetURL = URL. ProxyURL / >
<!-remove the target URL. ->
< cfset StructDelete (URL, 'ProxyURL') / >
< cfelse >
<!-get target url FORMS-based. ->
< cfset strTargetURL = FORM. ProxyURL / >
<!-remove the target URL. ->
< cfset StructDelete (FORM, 'ProxyURL') / >
< / cfif >
<!--
Remove any AJAX anit-setting cache which has been used by jQuery. This
a random number is intended to help ensure that the GET URL are
not implemented cache.
->
< cfset StructDelete (URL, '_') / >
<!--
Make the HTTP proxy request for help. When we do that, trying to convey information to CGI that was made by the initial application of AJAX.
->
"< result cfhttp ="objRequest' url = "#UrlDecode (strTargetURL)" # "method =" #CGI.request_method # "useragent =" "#CGI.http_user_agent #" timeout = "15" > "
<!-add the referer which was past-po->
< cfhttpparam type = "header" name = "referer" value = "" #CGI.http_referer # "/ >"
<!-pass the values to the URL. ->
< point cfloop = collection 'strKey' = "#URL #" >
"< cfhttpparam type ="url"name =" (strKey) #LCase "#" value = "#URL [strKey] #" / >
< / cfloop >
<!-transmit the values of the FORM. ->
<!-< element cfloop = 'strKey' collection = "# FORM #" >
"< cfhttpparam type ="formfield"name =" (strKey) #LCase "#" value = "#FORM [strKey] #" / >
< / cfloop >->
< cfhttpparam type = "url" name = "_authbykey" value = "56a7d8c123131c4058361567" >
< cfhttpparam type = "url" name = "project" value = "55c4ffd123131c567e294fe6" >
< cfhttpparam type = "url" name = "status [$in] []" value = "published" >
< cfhttpparam type = "url" name = "status [$in] []" value = "review" >
< cfhttpparam type = "url" name = "_fields []" value = "name" >
< / cfhttp >
<!--
<!-debug requires more up-to-date. ->
< cfset objDebug = {}
CGI = double (CGI)
URL = double (URL),
= Double (SHAPE) SHAPE,
Ask = double (objRequest)
} / >
<!-debug output to the file. ->
< cfdump
var = "" #objDebug # ""
output = "#ExpandPath ('.)" (/ ajax_prox_debug.htm") #
format = "HTML".
/ >
->
<!--
Get the content as a byte array (by converting it to binary,
We can send the appropriate length as well as use it in
the binary response stream.
->
< cfset binResponse = ToBinary (ToBase64 (objRequest.FileContent)) / >
<!-Echo back the response code. ->
"< cfheader statuscode =" #Val (objRequest.StatusCode) "#" statustext = "#ListRest (objRequest.StatusCode, ' ') #" / >
<!-Length response Echo back. ->
< name cfheader = "content-length" value = "#ArrayLen (binResponse)" # "/ >"
<!-Echo back all heaers response. ->
< item cfloop = 'strKey' collection = "#objRequest.ResponseHeader #" >
<!-Check if this header is a simple value. ->
< cfif IsSimpleValue (objRequest.ResponseHeader [strKey]) >
<!-back Echo header value. ->
"< name cfheader =" "#strKey #" value = "#objRequest.ResponseHeader [strKey] #" / >
< / cfif >
< / cfloop >
<!--
Echo of content with the appropriate mime type. With the help of
the Variable attribute, we will ensure that the content
Stream is reset to zero and THAT the response will be returned.
->
"< cfcontent type =" "#objRequest.MimeType #" variable = "#binResponse #" / >

It turns out that I don't need this block of code cfloop. The error is actually the cfheader tag. It works fine without the cfloop in this moment, so I'll just remove.

Using ColdFusion and get "Internal Server Error" instead of the ColdFusion error page

I'm using IIS7 with Windows Server 2008 R2. I have 11 ColdFusion set up and running. Everything seems to work fine except when I have a coldfusion error, I get an error message in IIS instead of ColdFusion. I get the generic 500 - internal error from the server instead of the ColdFusion page telling me what is the problem.
It is a new installation on an empty server. Nothing else is running on this computer, and nothing else has been charged.
In ColdFusion administrator, I have the checkboxes for "Enable robust Exception information" and "enable request Debugging Output" checked.
If there is no error on the page, the page works fine. Its hard to debug when I don't see what is wrong if there is a typo or something.
Thank you.

You must uncheck the box for "Enable HTTP Status Codes" under Server settings > settings in CF Admin.

Kind regards

Anit Kumar

Coldfusion10 scheduletask page error on Coldfusion Admin

We use the Enterprise edition of coldfusion10. We now have the issue on ColdfusionAdmin planning of tasks page. It displays error pointer null and we could not open or edit the page coldfusionadmin ancillary tasks. Can you help us?
Here's an error below
The system has attempted to use an undefined value, which usually indicates an error programming, either in your code or system code.
NULL pointers are another name for undefined values.

Resources:
Enable robust Exception information to provide more details about the source of errors. In the administrator, click debugging & Logging > Debug Output Settings, and select the robust exception information option.
See the ColdFusion documentation to verify that you are using the correct syntax.
Search the Knowledge Base to find a solution to your problem.

Browser Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)
Remote address 127.0.0.1

Even if the neo - cron.xml isn't empty and giving this error, you can take backup of neo - cron.xml existing then replace it with previously attached or any default neo - cron.xml CF 10 server.

Display debug in production information - more questions

Hi all - I'm working on a remote server of CF and the need displayed permanently of debugging information. Unfortunately, I lost my dedicated IP address which can be connected to the server, which gave me the privilege to see the information as required.
Earlier this week, I left a message on this forum related to this subject and told to use < CFSetting... to solve the problem.
I tried and have not been able to see the server variables and other debugging information.
This tag will replace the server variable 'turn on debugging,' If this is set to 'no '? (I suspect not, but no harm in asking).
Also, is there a way or a service that can take my new dynamic IP and solve a static IP number? Currently, I use dynDns.com to solve the problem, but that translates a domain name and not an IP domain, which can be used in the CF MX Administrator.
Note that this is how I set up the tag.
< cfsetting
enableCFoutputOnly = "yes".
showDebugOutput = "yes" >
I do not understand how this tag is supposed to work? I want to see all the information server on each page. CFSetting works only when there is an error? Arrrrrrggggggg - I am very needy everything right now to solve this problem.

As I answered your previous post, NO will not override the setting debug to the administrator.

If debugging is disabled in Administrator ColdFusion does not generate ALL debugging data. This is a performance gain and is often done on the production servers.

For the tag to work. Debugging must be enabled, AND must connect to the server with an IP address that is allowed to see the debugging. If he has set of intellectual property now in the filter, then all IP addresses may see the debug output.

This is what will make many ISPS. They will activate the debug and provide that no IP filters so that each user can see the debug output and allow developers to use the tag to display or not the output as you wish.

To answer your second question. DNS will not help you. You must provide an IP address, DNS is to provide a domain name to be replaced for an IP address.

The idea only I have, is if you could find a proxy service which would give you another address IP, then proxy that respond to yours. But that sounds like an option rather flaky to me.

ColdFusion MX 8 Debug Output

Similar Questions

Maybe you are looking for