JDE debug output

Is there a way to determine what the virtual machine and JVM exit orders mean in the output of the JDE window?

As far as I know there is no official documentation on which codes and messages.

Tags: BlackBerry Developers

Similar Questions

Using Qt-Creator 2.6 (beta) on mac and I don't get any debug output

Hello

I decided to try to get Qt-creator goes on mac for my boyfriend, so it can develop its dev-alpha and playbook.

Finely, I must see the dev-alpha, it has frozen several times and had other problems with vkb etc... very frustrating! lol well I always wish that I had a...

in any case, here is the mistake of Qt-creator:
```
Cannot show debug output. Error: Botan library exception: PK_Verifier: No working engine for RSA
```
I chose the gdb to
```
/Applications/bbndk/host_10_0_9_52/darwin/x86/usr/bin/ntoarm-gdb
```
Everything else seems to work very well.

Any suggestions would be greatly appreciated!

See you soon,.

Jon

I learned today that this problem has been fixed in the Qt Creator 2.6 branch.

See https://bugreports.qt-project.org/browse/QTCREATORBUG-7985 and https://codereview.qt-project.org/#change, 35987 for more details.

IPsec VPN Phase 2 does not. Need help with the debug output

Is someone can you please tell me why I can't establish ipsec Phase 2 negotiations. I'm trying to connect a 2651XM to a Pix 501.

Here are the isakmp debug and release of ipsec and configs. I checked the keys are the same. And sets of transformations look ok. No idea why its not working?

What is the bottom tell me?

===========================================================

01:32:37: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2

01:32:37: ISAKMP:(0:2:SW:1): IPSec policy invalidated proposal

01:32:37: ISAKMP:(0:2:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)

Mote 1.1.1.3)

01:32:37: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2

01:32:37: ISAKMP:(0:2:SW:1): IPSec policy invalidated proposal

01:32:37: ISAKMP:(0:2:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)

Mote 1.1.1.3)

===============================================================================

ISAKMP (0): start Quick Mode Exchange, M - ID - 1154286426:bb32fca6
crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
ISAKMP (0): processing NOTIFY payload Protocol 14 2
SPI 2224366689, message ID = 1503891776
ISAKMP (0): removal of spi 1629787524 message ID = 3140680870
to return to the State is IKMP_NO_ERR_NO_TRANS
pixfirewall #.
pixfirewall # sh crypto is
ISAKMP (0): start Quick Mode Exchange, M - ID 400184159:17da535f
crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
ISAKMP (0): processing NOTIFY payload Protocol 14 2
SPI 2649583861, message ID = 1778335964 a.
ISAKMP (0): removal of spi 4117818781 message ID = 400184159
status code returned is IKMP_NO_ERR_NO_TRANSkmp its
Total: 1
Embryonic: 0
Src DST in the meantime created State
1.1.1.2 1.1.1.3 QM_IDLE 0 0
pixfirewall #.
ISAKMP (0): start Quick Mode Exchange, M - ID 923039456:370476e0
crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
ISAKMP (0): processing NOTIFY payload Protocol 14 2
SPI 2163779852, message ID = 2746774364
ISAKMP (0): removal of spi 212465792 message ID = 923039456
to return to the State is IKMP_NO_ERR_NO_TRANSexi

Closure of session

CCC cryp #sh
CCC #sh crypto isakmp his
status of DST CBC State conn-id slot
1.1.1.2 1.1.1.3 QM_IDLE 1 0 ACTIVE

CCC #ping 192.168.1.1

Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.1, time-out is 2 seconds:
.....
Success rate is 0% (0/5)

CCC #ping 192.168.1.5

Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:
.....
Success rate is 0% (0/5)
CCC #debug isakmp crypto
Crypto ISAKMP debug is on
CCC #debug crypto ipsec
Crypto IPSEC debugging is on
Crypto CCC talkative #debug
detailed debug output debug is on
CCC #ping 192.168.1.5

Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:
.....
Success rate is 0% (0/5)
CCC #.
00:51:24: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:51:24: ISAKMP: node set 1268073006 to QM_IDLE
00:51:24: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 1268073006
00:51:24: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 1268073006
00:51:24: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:24: ISAKMP: turn 1, AH_SHA
00:51:24: ISAKMP: attributes of transformation:
00:51:24: ISAKMP: program is 1 (Tunnel)
00:51:24: ISAKMP: type of life in seconds
00:51:24: ISAKMP: life of HIS (basic) of 28800
00:51:24: ISAKMP: type of life in kilobytes
00:51:24: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:24: ISAKMP: authenticator is HMAC-SHA
00:51:24: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:24: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:24: ISAKMP: turn 1, ESP_3DES
00:51:24: ISAKMP: attributes of transformation:
00:51:24: ISAKMP: program is 1 (Tunnel)
00:51:24: ISAKMP: type of life in seconds
00:51:24: ISAKMP: life of HIS (basic) of 28800
00:51:24: ISAKMP: type of life in kilobytes
00:51:24: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:24: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:24: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:24: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:24: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:51:24: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:51:24: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:51:24: ISAKMP: node set-429221146 to QM_IDLE
00:51:24: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-429221146
00:51:24: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:51:24: ISAKMP: (0:1:SW:1): purge the node-429221146
00:51:24: ISAKMP: (0:1:SW:1): node 1268073006 REAL reason «QM rejec» error suppression
Ted. "
00:51:24: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node 1268073006: status = IKE_QM_READY
00:51:24: ISAKMP: (0:1:SW:1): entrance, node 1268073006 = IKE_MESG_FROM_PEER, IKE_QM_
EXCH
00:51:24: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:51:24: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart
with 1.1.1.3
00:51:54: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:51:54: ISAKMP: node set-500877443 to QM_IDLE
00:51:54: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID =-500877443
00:51:54: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID =-500877443
00:51:54: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:54: ISAKMP: turn 1, AH_SHA
00:51:54: ISAKMP: attributes of transformation:
00:51:54: ISAKMP: program is 1 (Tunnel)
00:51:54: ISAKMP: type of life in seconds
00:51:54: ISAKMP: life of HIS (basic) of 28800
00:51:54: ISAKMP: type of life in kilobytes
00:51:54: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:54: ISAKMP: authenticator is HMAC-SHA
00:51:54: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:54: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:51:54: ISAKMP: turn 1, ESP_3DES
00:51:54: ISAKMP: attributes of transformation:
00:51:54: ISAKMP: program is 1 (Tunnel)
00:51:54: ISAKMP: type of life in seconds
00:51:54: ISAKMP: life of HIS (basic) of 28800
00:51:54: ISAKMP: type of life in kilobytes
00:51:54: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:51:54: ISAKMP: (0:1:SW:1): atts are acceptable.
00:51:54: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:54: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:51:54: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:51:54: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:51:54: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:51:54: ISAKMP: node set-701693099 to QM_IDLE
00:51:54: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-701693099
00:51:54: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:51:54: ISAKMP: (0:1:SW:1): purge the node-701693099
00:51:54: ISAKMP: (0:1:SW:1): node-500877443 error suppression REAL reason "QM rejec.
Ted. "
00:51:54: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node-500877443: State = IKE_QM_READY
00:51:54: ISAKMP: (0:1:SW:1): entrance, node-500877443 = IKE_MESG_FROM_PEER, IKE_QM_
EXCH
00:51:54: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:52:14: ISAKMP: (0:1:SW:1): purge the node 1268073006
CCC #sh crypto isakmp his
status of DST CBC State conn-id slot
1.1.1.2 1.1.1.3 QM_IDLE 1 0 ACTIVE

CCC #ping 192.168.1.5

Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:

00:52:44: ISAKMP: (0:1:SW:1): purge node-500877443...
00:52:50: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:52:50: ISAKMP: node set 1186613650 to QM_IDLE
00:52:50: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 1186613650
00:52:50: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 1186613650
00:52:50: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:52:50: ISAKMP: turn 1, AH_SHA
00:52:50: ISAKMP: attributes of transformation:
00:52:50: ISAKMP: program is 1 (Tunnel)
00:52:50: ISAKMP: type of life in seconds
00:52:50: ISAKMP: life of HIS (basic) of 28800
00:52:50: ISAKMP: type of life in kilobytes
00:52:50: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:52:50: ISAKMP: authenticator is HMAC-SHA
00:52:50: ISAKMP: (0:1:SW:1): atts are acceptable.
00:52:50: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:52:50: ISAKMP: turn 1, ESP_3DES
00:52:50: ISAKMP: attributes of transformation:
00:52:50: ISAKMP: program is 1 (Tunnel)
00:52:50: ISAKMP: type of life in seconds
00:52:50: ISAKMP: life of HIS (basic) of 28800
00:52:50: ISAKMP: type of life in kilobytes
00:52:50: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:52:50: ISAKMP: (0:1:SW:1): atts are acceptable.
00:52:50: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:52:50: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.1.68.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:52:50: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:52:50: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:52:50: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:52:50: ISAKMP: node set-1113601414 to QM_IDLE
00:52:50: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-1113601414
00:52:50: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:52:50: ISAKMP: (0:1:SW:1): purge the node-1113601414
00:52:50: ISAKMP: (0:1:SW:1): node 1186613650 REAL reason «QM rejec» error suppression
Ted. "
00:52:50: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node 1186613650: status = IKE_QM_READY
00:52:50: ISAKMP: (0:1:SW:1): entrance, node 1186613650 = IKE_MESG_FROM_PEER, IKE_QM_
EXCH
00:52:50: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:52:50: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart
with 1.1.1.3.
Success rate is 0% (0/5)
CCC #.
00:53:20: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
Global (R) QM_IDLE
00:53:20: ISAKMP: node set 459446741 to QM_IDLE
00:53:20: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 459446741
00:53:20: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 459446741
00:53:20: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:53:20: ISAKMP: turn 1, AH_SHA
00:53:20: ISAKMP: attributes of transformation:
00:53:20: ISAKMP: program is 1 (Tunnel)
00:53:20: ISAKMP: type of life in seconds
00:53:20: ISAKMP: life of HIS (basic) of 28800
00:53:20: ISAKMP: type of life in kilobytes
00:53:20: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:53:20: ISAKMP: authenticator is HMAC-SHA
00:53:20: ISAKMP: (0:1:SW:1): atts are acceptable.
00:53:20: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
00:53:20: ISAKMP: turn 1, ESP_3DES
00:53:20: ISAKMP: attributes of transformation:
00:53:20: ISAKMP: program is 1 (Tunnel)
00:53:20: ISAKMP: type of life in seconds
00:53:20: ISAKMP: life of HIS (basic) of 28800
00:53:20: ISAKMP: type of life in kilobytes
00:53:20: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
00:53:20: ISAKMP: (0:1:SW:1): atts are acceptable.
00:53:20: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = AH, transform = ah-sha-hmac (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:53:20: IPSEC (validate_proposal_request): part #2 of the proposal
(Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp-3des (Tunnel),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
00:53:20: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
00:53:20: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
00:53:20: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
Mote 1.1.1.3)
00:53:20: ISAKMP: node set-1692074376 to QM_IDLE
00:53:20: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
SPI 2237255312, message ID =-1692074376
00:53:20: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
(R) QM_IDLE
00:53:20: ISAKMP: (0:1:SW:1): purge the node-1692074376
00:53:20: ISAKMP: (0:1:SW:1): REAL reason for node deletion 459446741 error "reject QM.
Ed ".
00:53:20: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
node 459446741: status = IKE_QM_READY
00:53:20: ISAKMP: (0:1:SW:1): entrance, node 459446741 = IKE_MESG_FROM_PEER, IKE_QM_E
XCH
00:53:20: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
00:53:40: ISAKMP: (0:1:SW:1): purge the node 1186613650
00:53:42: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, chang
State of Ed down
00:54:10: ISAKMP: (0:1:SW:1): purge the node 459446741

===============================================================================

6.2 (2) version PIX

ethernet0 nameif outside security0

nameif ethernet1 inside the security100

activate 8Ry2YjIyt7RRXU24 encrypted password

2KFQnbNIdI.2KYOU encrypted passwd

pixfirewall hostname

domain ciscopix.com

fixup protocol ftp 21

fixup protocol http 80

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

fixup protocol they 389

fixup protocol rsh 514

fixup protocol rtsp 554

fixup protocol smtp 25

fixup protocol sqlnet 1521

fixup protocol sip 5060

fixup protocol 2000 skinny

names of

permit 192.168.1.0 ip access list outside_cryptomap_20 255.255.255.0 10.10.10.0

255.255.255.0

permit 192.168.1.0 ip access list inside_outbound_nat0_acl 255.255.255.0 10.10.1

255.255.255.0 0.0

pager lines 24

interface ethernet0 10baset

interface ethernet1 10full

Outside 1500 MTU

Within 1500 MTU

1.1.1.3 outside IP address 255.255.255.0

IP address inside 192.168.1.1 255.255.255.0

alarm action IP verification of information

alarm action attack IP audit

location of PDM 10.10.10.0 255.255.255.0 inside

location of PDM 10.10.10.0 255.255.255.0 outside

PDM logging 100 information

history of PDM activate

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0-list of access inside_outbound_nat0_acl

NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

Route outside 0.0.0.0 0.0.0.0 1.1.1.2 1

Timeout xlate 0:05:00

Timeout conn 0 half-closed 01:00:10: 00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 TR

p 0:30:00 sip_media 0:02:00

Timeout, uauth 0:05:00 absolute

GANYMEDE + Protocol Ganymede + AAA-server

RADIUS Protocol RADIUS AAA server

AAA-server local LOCAL Protocol

Enable http server

http 192.168.1.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

SNMP-Server Community public

No trap to activate snmp Server

enable floodguard

Permitted connection ipsec sysopt

No sysopt route dnat

Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des

outside_map 20 ipsec-isakmp crypto map

card crypto outside_map 20 match address outside_cryptomap_20

card crypto outside_map 20 peers set 1.1.1.2

card crypto outside_map 20 game of transformation-Petaluma_VPN

outside_map interface card crypto outside

ISAKMP allows outside

ISAKMP key * 1.1.1.2 address netmask 255.255.255.255 No.-xauth No.-config-m

Ode

part of pre authentication ISAKMP policy 20

ISAKMP policy 20 3des encryption

ISAKMP policy 20 md5 hash

20 2 ISAKMP policy group

ISAKMP duration strategy of life 20 86400

Telnet timeout 5

SSH timeout 5

dhcpd address 192.168.1.5 - 192.168.1.33 inside

dhcpd lease 3600

dhcpd ping_timeout 750

dhcpd outside auto_config

dhcpd allow inside

Terminal width 80

Cryptochecksum:8c0d4948407071d3515f1546cf8bc147

: end

pixfirewall #.

=========================================================================

CCC #sh run
Building configuration...

Current configuration: 1328 bytes
!
version 12.4
horodateurs service debug uptime
Log service timestamps uptime
no password encryption service
!
CCC host name
!
boot-start-marker
start the system flash c2600-adventerprisek9 - mz.124 - 25d.bin
boot-end-marker
!
!
No aaa new-model
no location network-clock-participate 1
No network-clock-participate wic 0
IP cef
!
!
!
!

!

!

!

crypto ISAKMP policy 2

BA 3des

md5 hash

preshared authentication

Group 2

address key crypto isakmp 1.1.1.3 cisco123

!

!

Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des

!

map Petaluma_1 1 ipsec-isakmp crypto

defined peer 1.1.1.3

game of transformation-Petaluma_VPN

match address 100

!

!

!

!

interface FastEthernet0/0

1.1.1.2 IP 255.255.255.0

automatic speed

Half duplex

!

interface Serial0/0

no ip address

Shutdown

clock speed of 56000

!

interface FastEthernet0/1

10.10.10.2 IP address 255.255.255.0

automatic duplex

automatic speed

card crypto Petaluma_1

!

IP forward-Protocol ND

IP route 192.168.1.0 255.255.255.0 1.1.1.3

!

!

no ip address of the http server

no ip http secure server

!

access-list 100 permit ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255

control plan
!
!
!
!
!
!
!
!
!
!
Line con 0
line to 0
line vty 0 4
opening of session
!
!
end

CCC #.

!
!
!
crypto ISAKMP policy 2
BA 3des
md5 hash
preshared authentication
Group 2
address key crypto isakmp 1.1.1.3 cisco123
!
!
Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
!
map Petaluma_1 1 ipsec-isakmp crypto
defined peer 1.1.1.3
game of transformation-Petaluma_VPN
match address 100
!
!
!
!
interface FastEthernet0/0

1.1.1.2 IP 255.255.255.0
automatic speed
Half duplex
!
interface Serial0/0
no ip address
Shutdown
clock speed of 56000
!
interface FastEthernet0/1
10.10.10.2 IP address 255.255.255.0
automatic duplex
automatic speed
card crypto Petaluma_1
!
IP forward-Protocol ND
IP route 192.168.1.0 255.255.255.0 1.1.1.3
!
!
no ip address of the http server
no ip http secure server
!
access-list 100 permit ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255

Hi David,

Overlooking the configuration of the router, it seems that you have applied the encryption card to the wrong interface.

interface FastEthernet0/0

1.1.1.2 IP 255.255.255.0

automatic speed

Half duplex

!

interface FastEthernet0/1

10.10.10.2 IP address 255.255.255.0

automatic duplex

automatic speed

card crypto Petaluma_1

Given that the pix will attempt to build a VPN tunnel to 1.1.1.2 map encryption Petaluma_1 must be applied to FastEthernet0/0, not FastEthernet 0/1.

Let me know if it helps.

Thank you

Loren

debug output is not

My suddnely of CF9 server stopped showing debug output. Debug output is set to Yes and I have the correct ip address. I even tried < cfsetting showDebugOutput = "true" >, but nothing appears. Any ideas?

Found the problem. When upgrading to Windows 10, the prioritised card vpn setting the IP Address of the server instead of my local ip. I tried to use the DHCP protocol listed in ipconfig for VPN, but it did not work. Then, I changed the setting of the adapter for the VPN connection to use my local IP address and it worked.

Disable debug output
Hey,.

I'm creating XML and generated by coldfusion debug output causes an error. I tried to put < cfsetting showdebugoutput = 'no' > at the top of my page and the error was always popping up. I then called my server host and had them off manually the output of debut, and the error still showed upward.

The question is how can I know that the error is caused by debugging output Coldfusion... Here's the ugliness which, to my knowledge, is exclusively from this output

So two questions arise:
(1) this output can be caused by another source? (and I have checked all my data in the XML)
(2) what can I do to get rid of this output

Thank you
Just as a note, I'm attacked using a different method, I just put all the information as a string and use XMLFormat for nodes... and it worked. There is no error thrown, he ran through the entire script, and then they threw the XML error. Regarding the old code, I've trashed it, thanks to the entry however.

Not appearing debug output is not with cfmodule
Hi, I have a problem here I just can't solve. I have a unique model that contains the code in my header and footer called globalheader.cfm which gives the floor to cfmodule (see the code example below). Everything works, the only problem is that the debug output appear not. Debugging is enabled correctly and presents itself if I remove the tag to cfmodule call globalheader.cfm. Any help would be greatly appreciated.
Thank you! It wasn't the answer, but it lead me to it!

The culprit was the cfcontent tag. I used it to remove the white space. I didn't know it would affect the output of debug too. I commented and now I see Debugging.

ColdFusion MX 8 Debug Output
I have installed the edition of CFMX 8 Dev, enabled the debug output, but the output is not displayed. I can access the web pages, but cannot see the output of debuh.

Any ideas on how to solve this problem?
Don't know why, but it is fixed. Just reinstalled CF 8, reset the debug settings and now it works.

CF8 Developer: debug output?
I have CF8 Developer Edition installed on my Vista Business PC.
I tried to put the debug output on (in the ColdFusion - Debgiing & logging admin), but I get no results.

On my old PC (CF7 Developer Edition on Windows XP), I had no problem to set this up.

Any idea?
Thank you

Sorry, I found the solution:
In the ColdFusion Administrator - Debugging & Logging, I deleted the list of IP addresses, and now it works.

(empty list means: send the output to all users)

Write Debug Output to the media under the Simulator map

I'm testing my application using the Simulator with the eclipse plugin (using the simulated device 9700). Simply, I can't open a file. Here is the code I use:
```
try {   // filename = "file:///SDCard/debug.txt"
    fileConnection = (FileConnection) Connector.open(fileName);
} catch (IOException e) {
    System.out.println("Could not create " + fileName);
    e.printStackTrace();
}

if (fileConnection != null) {
    try {
        OutputStream out = fileConnection.openOutputStream();
    } catch (IOException e) {
        e.printStackTrace();
    }
}
```
Are there settings specific Simulator which must be defined and who could stop me from writing on the SD card in the device? I put 'Use PC file to SD Card file system' and with the path on my PC where I want the file resides. Any help would be greatly appreciated.

The file exists in your file? If it isn't, your code does not indicate that you create a file.

So when you try to open an output stream on a file that does not exist, that would not work.

Steps to follow:

-Check if a file exists

-Yes: Open stream and write to the file

-No: fileConnection.create)

-Open the stream and write to the file

PS Don't forget to close the flow of data and file connection when you are finished.

After using IMAQ RT Video Out, how to return to the string of rt debugging output?

After having used the video on VI IMAQ RT, the screen image as expected. Then, I want to return to the display console where I can see the RT Debug channels and the processor. Is this possible?

Infinite,.

The previous answer is incorrect. It is possible to change the mode back to text video. Just use the "IMAQ out video display Mode" VI for the parameter "Text Mode". This should restore the display of text.

-Eric

Device-debug output?

Hello NDK devs.

We are trying track down a bug only release device. It seems that symbols are either generated not be loaded by GDB. We use a build managed Momentics. All the parameters or manual control of GDB for this?

Thank you!

Stéphane

Ridicule me. G adding options to the compiler and the linker for the target it's done.

debugging on the actual device different subversions jde - firmware

I want to debug my code on a device connected via usb. I know that I need the same type in JDE and the device.

For example, JDE 4.5-> device must have firmware 4.5.

Although I checked the debugger tells me it can't find net_rim_app_manager.debug and many others. When I browse with browse for the files of simulator of the JDE debug files it is not like that and told me
```
Bad debug information: \simulator\net_rim_app_manager.debug(4846a5e2)-net_rim_app_manager(494996a0)
```
My regognizes JDE-attachment-device usb. When I ignore the mistakes I see some, but not all of the messages in the debug window. If the connection is ok.

My firmware installed JDE Simulator Version DO match the firmwareversion of the unit BUT not the firmware-sub-version number. I mean the numbers after the second point (4.5.XXXX) is the reason for the error message?

If Yes,

-How and where can I get the EXACT match firmware-subversion for my device?

-How can I do a real device debugging with the latest firmware?

If none, I miss something else?

my JDE:4.5.0

my camera - 4.5.0.Simulator - JDE: 8310

my JDE - 4.5.0.Simulator - Firmware: 4.5.0.44

my real device: 8310

my real device Firmware: 4.5.0.124

Thanks for help

Anil

OK, after some research and debugging, I found the solution in this post

http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=3769&query.ID=266...

a little summary here (including the above mentioned display comments). In this example, we assume that you are using JDE 4.5.0.
- Check that you have installed the latest BlackBerry-Desktop-Manager. So you can be sure, that your device connected by usb is detected
- Versions have to mach exactly! When you have the 4.5.0.102 firmware on your JDE-Simulator, you MUST have firmware on your real device 4.5.0.102. RIM provides many different simulators with a different firmware for debugging http://www.blackberry.com/developers/downloads/simulators
- Install the corresponding correct Simulator and follow the Instructions of BB JDE 4.5.0 Guide Chapter development
  "Install the .debug computer files".
- Connect your real device via USB
- Compile your code in RIM JDE
- If you use sensitive APIs-> sign your code
- Load the cod files compiled on your actual device with JavaLoader.exe
- Debugging-> attached to him-> Pocket-> USB ()
- No, you can debug, breakpoints, out of the console, etc...
Note: Although I have installed now the exact match versions. The debugger tells some files that it "does not find" them which is:
```
net_rim_theme_120_green_320x240_b.debugnet_rim_theme_120_green_320x240_b-(1-13).debug

net_rim_theme_120_today_320x240_b.debug net_rim_theme_120_today_320x240_b-(1-13).debug

net_rim_bb_smime.debug
```
I think that these debug files are relatively large for most applications, so you can ignore it.

A good indicator to see that there is really a version mismatch is the first file, it cannot find "net_rim_app_manager.debug".

Anil cordially

Debugging Win32 from OutputDebugString() messages do not appear in the debugger

I am using CVI to produce messages from debugging debugger Win32 using OutputDebugString(). However, debugging messages are not appearing in any debugger. I can see them in the debug output window in CVI, but they do not appear in any debugger (DebugView, Spy Trace, Hoo WinTail, etc..) I show all messages in every process in the debugger, and I can see the messages sent with OutputDebugString() of LabVIEW, but for some reason any nothing appears when I call with CVI OutputDebugString(). I also tried all the Options-> environment-> Debug settings. I'm with CVI 10.0.0.

Any ideas?

Thanks in advance,

Joe

Only a debugger can capture the output of debugging a program debugged at the time. So if you are DEBUGGING your CVI program, then the program debug output is visible in the CVI debug output window. If you RUN (Ctrl + F5) your CVI program without debugging, then you can see the output in dbgview program debugging.

JDE Simulator error "reload software: 552".

Hi, I use Blackberry JDE version 4.7 with Simulator 4.6.0.150 bold 9000. Everything works fine an hour ago.

It just started to show "reload software: 552" all of a sudden. He have no importance how to start the simulater, JDE debuger, or simply run the Simulator booth along.

There is a solution to a real device for this error message, but what it means for a Simulator?

Thanks for your help.

Chimera

If you run your 4.7 on a "BOLD" device software, you run the risk of "bricking" of the device, then do not.

The JDE 4.7 has only a simulator of the storm, because the storm is the only device which manages 4.7 OS.

If you want to target the "BOLD", then use the 4.6 JDE or more LOW (no more).

How to debug the java application BlackBerry on Eclipse with a BlackBerry Smartphone?

Problem:

How to debug the java application BlackBerry on Eclipse with a BlackBerry Smartphone?

The following procedure:

http://docs.BlackBerry.com/en/developers/deliverables/12002/Debug_an_app_on_BB_device_656366_11.jsp

Error:

An internal error occurred during: "launch WMMS_ACC_video_test0".
java.lang.NullPointerException

I found that other methods of debugging.

If anyone knows how to do it please tell me.

Thank you for your attention.

http://www.BlackBerryForums.com/developer-forum/107455-debugging-live-device.html

Solution:

Start the IDE
Connect your device to the PC via USB
compile your application and load on the device
in JDE - Debug - attach to-Pocket
ignore all dialog boxes
do the breakpoint
Start your application on the device

JDE debug output

Similar Questions

Maybe you are looking for