Disable debug output

Similar Questions

• Enable/disable debugging for all vi in project

  The question is quite simple. Is there a way globally enable and disable debugging. I know there is a slight performance penalty to have it activated, and I'm trying to figure out how much I can get out of my algorithm performance. Would be nice if I didn't have to go to each individual vi and toggle this setting.

  There is no simple way in the IDE to do this only for development purposes. If you create a version specification (executable source distribution, etc.) then you can adjust it for the distribution itself so that the 'construction' has debugging disabled. You can also script a simple to VI and programtically change this option in a group of the screws.

• Using Qt-Creator 2.6 (beta) on mac and I don't get any debug output

  Hello

  I decided to try to get Qt-creator goes on mac for my boyfriend, so it can develop its dev-alpha and playbook.

  Finely, I must see the dev-alpha, it has frozen several times and had other problems with vkb etc... very frustrating! lol well I always wish that I had a...

  in any case, here is the mistake of Qt-creator:

  Cannot show debug output. Error: Botan library exception: PK_Verifier: No working engine for RSA
  

  I chose the gdb to

  /Applications/bbndk/host_10_0_9_52/darwin/x86/usr/bin/ntoarm-gdb
  

  Everything else seems to work very well.

  Any suggestions would be greatly appreciated!

  See you soon,.

  Jon

  I learned today that this problem has been fixed in the Qt Creator 2.6 branch.

  See https://bugreports.qt-project.org/browse/QTCREATORBUG-7985 and https://codereview.qt-project.org/#change, 35987 for more details.

• IPsec VPN Phase 2 does not. Need help with the debug output

  Is someone can you please tell me why I can't establish ipsec Phase 2 negotiations.  I'm trying to connect a 2651XM to a Pix 501.

  Here are the isakmp debug and release of ipsec and configs. I checked the keys are the same. And sets of transformations look ok. No idea why its not working?

  What is the bottom tell me?

  ===========================================================

  01:32:37: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2

  01:32:37: ISAKMP:(0:2:SW:1): IPSec policy invalidated proposal

  01:32:37: ISAKMP:(0:2:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)

  Mote 1.1.1.3)

  01:32:37: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2

  01:32:37: ISAKMP:(0:2:SW:1): IPSec policy invalidated proposal

  01:32:37: ISAKMP:(0:2:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)

  Mote 1.1.1.3)

  ===============================================================================

  ISAKMP (0): start Quick Mode Exchange, M - ID - 1154286426:bb32fca6
  crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
  ISAKMP (0): processing NOTIFY payload Protocol 14 2
  SPI 2224366689, message ID = 1503891776
  ISAKMP (0): removal of spi 1629787524 message ID = 3140680870
  to return to the State is IKMP_NO_ERR_NO_TRANS
  pixfirewall #.
  pixfirewall # sh crypto is
  ISAKMP (0): start Quick Mode Exchange, M - ID 400184159:17da535f
  crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
  ISAKMP (0): processing NOTIFY payload Protocol 14 2
  SPI 2649583861, message ID = 1778335964 a.
  ISAKMP (0): removal of spi 4117818781 message ID = 400184159
  status code returned is IKMP_NO_ERR_NO_TRANSkmp its
  Total: 1
  Embryonic: 0
  Src DST in the meantime created State
  1.1.1.2 1.1.1.3 QM_IDLE 0 0
  pixfirewall #.
  ISAKMP (0): start Quick Mode Exchange, M - ID 923039456:370476e0
  crypto_isakmp_process_block: CBC 1.1.1.2 1.1.1.3 dest
  ISAKMP (0): processing NOTIFY payload Protocol 14 2
  SPI 2163779852, message ID = 2746774364
  ISAKMP (0): removal of spi 212465792 message ID = 923039456
  to return to the State is IKMP_NO_ERR_NO_TRANSexi

  Closure of session

  CCC cryp #sh
  CCC #sh crypto isakmp his
  status of DST CBC State conn-id slot
  1.1.1.2 1.1.1.3 QM_IDLE 1 0 ACTIVE

  CCC #ping 192.168.1.1

  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 192.168.1.1, time-out is 2 seconds:
  .....
  Success rate is 0% (0/5)

  CCC #ping 192.168.1.5

  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:
  .....
  Success rate is 0% (0/5)
  CCC #debug isakmp crypto
  Crypto ISAKMP debug is on
  CCC #debug crypto ipsec
  Crypto IPSEC debugging is on
  Crypto CCC talkative #debug
  detailed debug output debug is on
  CCC #ping 192.168.1.5

  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:
  .....
  Success rate is 0% (0/5)
  CCC #.
  00:51:24: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
  Global (R) QM_IDLE
  00:51:24: ISAKMP: node set 1268073006 to QM_IDLE
  00:51:24: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 1268073006
  00:51:24: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 1268073006
  00:51:24: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
  00:51:24: ISAKMP: turn 1, AH_SHA
  00:51:24: ISAKMP: attributes of transformation:
  00:51:24: ISAKMP: program is 1 (Tunnel)
  00:51:24: ISAKMP: type of life in seconds
  00:51:24: ISAKMP: life of HIS (basic) of 28800
  00:51:24: ISAKMP: type of life in kilobytes
  00:51:24: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
  00:51:24: ISAKMP: authenticator is HMAC-SHA
  00:51:24: ISAKMP: (0:1:SW:1): atts are acceptable.
  00:51:24: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
  00:51:24: ISAKMP: turn 1, ESP_3DES
  00:51:24: ISAKMP: attributes of transformation:
  00:51:24: ISAKMP: program is 1 (Tunnel)
  00:51:24: ISAKMP: type of life in seconds
  00:51:24: ISAKMP: life of HIS (basic) of 28800
  00:51:24: ISAKMP: type of life in kilobytes
  00:51:24: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
  00:51:24: ISAKMP: (0:1:SW:1): atts are acceptable.
  00:51:24: IPSEC (validate_proposal_request): part #1 of the proposal
  (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
  local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
  remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
  Protocol = AH, transform = ah-sha-hmac (Tunnel),
  lifedur = 0 and 0kb in
  SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
  00:51:24: IPSEC (validate_proposal_request): part #2 of the proposal
  (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
  local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
  remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
  Protocol = ESP, transform = esp-3des (Tunnel),
  lifedur = 0 and 0kb in
  SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
  00:51:24: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
  00:51:24: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
  00:51:24: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
  Mote 1.1.1.3)
  00:51:24: ISAKMP: node set-429221146 to QM_IDLE
  00:51:24: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
  SPI 2237255312, message ID =-429221146
  00:51:24: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
  (R) QM_IDLE
  00:51:24: ISAKMP: (0:1:SW:1): purge the node-429221146
  00:51:24: ISAKMP: (0:1:SW:1): node 1268073006 REAL reason «QM rejec» error suppression
  Ted. "
  00:51:24: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
  node 1268073006: status = IKE_QM_READY
  00:51:24: ISAKMP: (0:1:SW:1): entrance, node 1268073006 = IKE_MESG_FROM_PEER, IKE_QM_
  EXCH
  00:51:24: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
  00:51:24: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart
  with 1.1.1.3
  00:51:54: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
  Global (R) QM_IDLE
  00:51:54: ISAKMP: node set-500877443 to QM_IDLE
  00:51:54: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID =-500877443
  00:51:54: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID =-500877443
  00:51:54: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
  00:51:54: ISAKMP: turn 1, AH_SHA
  00:51:54: ISAKMP: attributes of transformation:
  00:51:54: ISAKMP: program is 1 (Tunnel)
  00:51:54: ISAKMP: type of life in seconds
  00:51:54: ISAKMP: life of HIS (basic) of 28800
  00:51:54: ISAKMP: type of life in kilobytes
  00:51:54: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
  00:51:54: ISAKMP: authenticator is HMAC-SHA
  00:51:54: ISAKMP: (0:1:SW:1): atts are acceptable.
  00:51:54: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
  00:51:54: ISAKMP: turn 1, ESP_3DES
  00:51:54: ISAKMP: attributes of transformation:
  00:51:54: ISAKMP: program is 1 (Tunnel)
  00:51:54: ISAKMP: type of life in seconds
  00:51:54: ISAKMP: life of HIS (basic) of 28800
  00:51:54: ISAKMP: type of life in kilobytes
  00:51:54: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
  00:51:54: ISAKMP: (0:1:SW:1): atts are acceptable.
  00:51:54: IPSEC (validate_proposal_request): part #1 of the proposal
  (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
  local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
  remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
  Protocol = AH, transform = ah-sha-hmac (Tunnel),
  lifedur = 0 and 0kb in
  SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
  00:51:54: IPSEC (validate_proposal_request): part #2 of the proposal
  (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
  local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
  remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
  Protocol = ESP, transform = esp-3des (Tunnel),
  lifedur = 0 and 0kb in
  SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
  00:51:54: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
  00:51:54: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
  00:51:54: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
  Mote 1.1.1.3)
  00:51:54: ISAKMP: node set-701693099 to QM_IDLE
  00:51:54: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
  SPI 2237255312, message ID =-701693099
  00:51:54: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
  (R) QM_IDLE
  00:51:54: ISAKMP: (0:1:SW:1): purge the node-701693099
  00:51:54: ISAKMP: (0:1:SW:1): node-500877443 error suppression REAL reason "QM rejec.
  Ted. "
  00:51:54: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
  node-500877443: State = IKE_QM_READY
  00:51:54: ISAKMP: (0:1:SW:1): entrance, node-500877443 = IKE_MESG_FROM_PEER, IKE_QM_
  EXCH
  00:51:54: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
  00:52:14: ISAKMP: (0:1:SW:1): purge the node 1268073006
  CCC #sh crypto isakmp his
  status of DST CBC State conn-id slot
  1.1.1.2 1.1.1.3 QM_IDLE 1 0 ACTIVE

  CCC #ping 192.168.1.5

  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 192.168.1.5, time-out is 2 seconds:

  00:52:44: ISAKMP: (0:1:SW:1): purge node-500877443...
  00:52:50: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
  Global (R) QM_IDLE
  00:52:50: ISAKMP: node set 1186613650 to QM_IDLE
  00:52:50: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 1186613650
  00:52:50: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 1186613650
  00:52:50: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
  00:52:50: ISAKMP: turn 1, AH_SHA
  00:52:50: ISAKMP: attributes of transformation:
  00:52:50: ISAKMP: program is 1 (Tunnel)
  00:52:50: ISAKMP: type of life in seconds
  00:52:50: ISAKMP: life of HIS (basic) of 28800
  00:52:50: ISAKMP: type of life in kilobytes
  00:52:50: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
  00:52:50: ISAKMP: authenticator is HMAC-SHA
  00:52:50: ISAKMP: (0:1:SW:1): atts are acceptable.
  00:52:50: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
  00:52:50: ISAKMP: turn 1, ESP_3DES
  00:52:50: ISAKMP: attributes of transformation:
  00:52:50: ISAKMP: program is 1 (Tunnel)
  00:52:50: ISAKMP: type of life in seconds
  00:52:50: ISAKMP: life of HIS (basic) of 28800
  00:52:50: ISAKMP: type of life in kilobytes
  00:52:50: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
  00:52:50: ISAKMP: (0:1:SW:1): atts are acceptable.
  00:52:50: IPSEC (validate_proposal_request): part #1 of the proposal
  (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
  local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
  remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
  Protocol = AH, transform = ah-sha-hmac (Tunnel),
  lifedur = 0 and 0kb in
  SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
  00:52:50: IPSEC (validate_proposal_request): part #2 of the proposal
  (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
  local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
  remote_proxy = 192.1.68.1.0/255.255.255.0/0/0 (type = 4),
  Protocol = ESP, transform = esp-3des (Tunnel),
  lifedur = 0 and 0kb in
  SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
  00:52:50: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
  00:52:50: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
  00:52:50: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
  Mote 1.1.1.3)
  00:52:50: ISAKMP: node set-1113601414 to QM_IDLE
  00:52:50: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
  SPI 2237255312, message ID =-1113601414
  00:52:50: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
  (R) QM_IDLE
  00:52:50: ISAKMP: (0:1:SW:1): purge the node-1113601414
  00:52:50: ISAKMP: (0:1:SW:1): node 1186613650 REAL reason «QM rejec» error suppression
  Ted. "
  00:52:50: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
  node 1186613650: status = IKE_QM_READY
  00:52:50: ISAKMP: (0:1:SW:1): entrance, node 1186613650 = IKE_MESG_FROM_PEER, IKE_QM_
  EXCH
  00:52:50: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
  00:52:50: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode has failed with the counterpart
  with 1.1.1.3.
  Success rate is 0% (0/5)
  CCC #.
  00:53:20: ISAKMP (0:134217729): received packet of 1.1.1.3 dport 500 sport 500
  Global (R) QM_IDLE
  00:53:20: ISAKMP: node set 459446741 to QM_IDLE
  00:53:20: ISAKMP:(0:1:SW:1): HASH payload processing. Message ID = 459446741
  00:53:20: ISAKMP:(0:1:SW:1): treatment ITS payload. Message ID = 459446741
  00:53:20: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
  00:53:20: ISAKMP: turn 1, AH_SHA
  00:53:20: ISAKMP: attributes of transformation:
  00:53:20: ISAKMP: program is 1 (Tunnel)
  00:53:20: ISAKMP: type of life in seconds
  00:53:20: ISAKMP: life of HIS (basic) of 28800
  00:53:20: ISAKMP: type of life in kilobytes
  00:53:20: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
  00:53:20: ISAKMP: authenticator is HMAC-SHA
  00:53:20: ISAKMP: (0:1:SW:1): atts are acceptable.
  00:53:20: ISAKMP: (0:1:SW:1): proposal of IPSec checking 1
  00:53:20: ISAKMP: turn 1, ESP_3DES
  00:53:20: ISAKMP: attributes of transformation:
  00:53:20: ISAKMP: program is 1 (Tunnel)
  00:53:20: ISAKMP: type of life in seconds
  00:53:20: ISAKMP: life of HIS (basic) of 28800
  00:53:20: ISAKMP: type of life in kilobytes
  00:53:20: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
  00:53:20: ISAKMP: (0:1:SW:1): atts are acceptable.
  00:53:20: IPSEC (validate_proposal_request): part #1 of the proposal
  (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
  local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
  remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
  Protocol = AH, transform = ah-sha-hmac (Tunnel),
  lifedur = 0 and 0kb in
  SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
  00:53:20: IPSEC (validate_proposal_request): part #2 of the proposal
  (Eng. msg key.) Local INCOMING = 1.1.1.2, distance = 1.1.1.3.
  local_proxy = 10.10.10.0/255.255.255.0/0/0 (type = 4),
  remote_proxy = 192.168.1.0/255.255.255.0/0/0 (type = 4),
  Protocol = ESP, transform = esp-3des (Tunnel),
  lifedur = 0 and 0kb in
  SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2
  00:53:20: IPSEC (validate_transform_proposal): invalid local address 1.1.1.2
  00:53:20: ISAKMP:(0:1:SW:1): IPSec policy invalidated proposal
  00:53:20: ISAKMP:(0:1:SW:1): politics of ITS phase 2 is not acceptable! (local 1.1.1.2 re)
  Mote 1.1.1.3)
  00:53:20: ISAKMP: node set-1692074376 to QM_IDLE
  00:53:20: ISAKMP: (0:1:SW:1): Protocol to send NOTIFIER PROPOSAL_NOT_CHOSEN 2
  SPI 2237255312, message ID =-1692074376
  00:53:20: ISAKMP:(0:1:SW:1): sending package to 1.1.1.3 my_port 500 peer_port 500
  (R) QM_IDLE
  00:53:20: ISAKMP: (0:1:SW:1): purge the node-1692074376
  00:53:20: ISAKMP: (0:1:SW:1): REAL reason for node deletion 459446741 error "reject QM.
  Ed ".
  00:53:20: ISAKMP (0:134217729): unknown IKE_MESG_FROM_PEER, IKE_QM_EXCH entry:
  node 459446741: status = IKE_QM_READY
  00:53:20: ISAKMP: (0:1:SW:1): entrance, node 459446741 = IKE_MESG_FROM_PEER, IKE_QM_E
  XCH
  00:53:20: ISAKMP: (0:1:SW:1): former State = new State IKE_QM_READY = IKE_QM_READY
  00:53:40: ISAKMP: (0:1:SW:1): purge the node 1186613650
  00:53:42: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, chang
  State of Ed down
  00:54:10: ISAKMP: (0:1:SW:1): purge the node 459446741

  ===============================================================================

  6.2 (2) version PIX

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate 8Ry2YjIyt7RRXU24 encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  pixfirewall hostname

  domain ciscopix.com

  fixup protocol ftp 21

  fixup protocol http 80

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol sip 5060

  fixup protocol 2000 skinny

  names of

  permit 192.168.1.0 ip access list outside_cryptomap_20 255.255.255.0 10.10.10.0

  255.255.255.0

  permit 192.168.1.0 ip access list inside_outbound_nat0_acl 255.255.255.0 10.10.1

  255.255.255.0 0.0

  pager lines 24

  interface ethernet0 10baset

  interface ethernet1 10full

  Outside 1500 MTU

  Within 1500 MTU

  1.1.1.3 outside IP address 255.255.255.0

  IP address inside 192.168.1.1 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  location of PDM 10.10.10.0 255.255.255.0 inside

  location of PDM 10.10.10.0 255.255.255.0 outside

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_outbound_nat0_acl

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Route outside 0.0.0.0 0.0.0.0 1.1.1.2 1

  Timeout xlate 0:05:00

  Timeout conn 0 half-closed 01:00:10: 00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 TR

  p 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  No sysopt route dnat

  Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des

  outside_map 20 ipsec-isakmp crypto map

  card crypto outside_map 20 match address outside_cryptomap_20

  card crypto outside_map 20 peers set 1.1.1.2

  card crypto outside_map 20 game of transformation-Petaluma_VPN

  outside_map interface card crypto outside

  ISAKMP allows outside

  ISAKMP key * 1.1.1.2 address netmask 255.255.255.255 No.-xauth No.-config-m

  Ode

  part of pre authentication ISAKMP policy 20

  ISAKMP policy 20 3des encryption

  ISAKMP policy 20 md5 hash

  20 2 ISAKMP policy group

  ISAKMP duration strategy of life 20 86400

  Telnet timeout 5

  SSH timeout 5

  dhcpd address 192.168.1.5 - 192.168.1.33 inside

  dhcpd lease 3600

  dhcpd ping_timeout 750

  dhcpd outside auto_config

  dhcpd allow inside

  Terminal width 80

  Cryptochecksum:8c0d4948407071d3515f1546cf8bc147

  : end

  pixfirewall #.

  =========================================================================

  CCC #sh run
  Building configuration...

  Current configuration: 1328 bytes
  !
  version 12.4
  horodateurs service debug uptime
  Log service timestamps uptime
  no password encryption service
  !
  CCC host name
  !
  boot-start-marker
  start the system flash c2600-adventerprisek9 - mz.124 - 25d.bin
  boot-end-marker
  !
  !
  No aaa new-model
  no location network-clock-participate 1
  No network-clock-participate wic 0
  IP cef
  !
  !
  !
  !

  !

  !

  !

  crypto ISAKMP policy 2

  BA 3des

  md5 hash

  preshared authentication

  Group 2

  address key crypto isakmp 1.1.1.3 cisco123

  !

  !

  Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des

  !

  map Petaluma_1 1 ipsec-isakmp crypto

  defined peer 1.1.1.3

  game of transformation-Petaluma_VPN

  match address 100

  !

  !

  !

  !

  interface FastEthernet0/0

  1.1.1.2 IP 255.255.255.0

  automatic speed

  Half duplex

  !

  interface Serial0/0

  no ip address

  Shutdown

  clock speed of 56000

  !

  interface FastEthernet0/1

  10.10.10.2 IP address 255.255.255.0

  automatic duplex

  automatic speed

  card crypto Petaluma_1

  !

  IP forward-Protocol ND

  IP route 192.168.1.0 255.255.255.0 1.1.1.3

  !

  !

  no ip address of the http server

  no ip http secure server

  !

  access-list 100 permit ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255

  control plan
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  Line con 0
  line to 0
  line vty 0 4
  opening of session
  !
  !
  end

  CCC #.

  !
  !
  !
  crypto ISAKMP policy 2
  BA 3des
  md5 hash
  preshared authentication
  Group 2
  address key crypto isakmp 1.1.1.3 cisco123
  !
  !
  Crypto ipsec transform-set Petaluma_VPN ah-sha-hmac esp-3des
  !
  map Petaluma_1 1 ipsec-isakmp crypto
  defined peer 1.1.1.3
  game of transformation-Petaluma_VPN
  match address 100
  !
  !
  !
  !
  interface FastEthernet0/0

  1.1.1.2 IP 255.255.255.0
  automatic speed
  Half duplex
  !
  interface Serial0/0
  no ip address
  Shutdown
  clock speed of 56000
  !
  interface FastEthernet0/1
  10.10.10.2 IP address 255.255.255.0
  automatic duplex
  automatic speed
  card crypto Petaluma_1
  !
  IP forward-Protocol ND
  IP route 192.168.1.0 255.255.255.0 1.1.1.3
  !
  !
  no ip address of the http server
  no ip http secure server
  !
  access-list 100 permit ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255

  Hi David,

  Overlooking the configuration of the router, it seems that you have applied the encryption card to the wrong interface.

  interface FastEthernet0/0

  1.1.1.2 IP 255.255.255.0

  automatic speed

  Half duplex

  !

  interface FastEthernet0/1

  10.10.10.2 IP address 255.255.255.0

  automatic duplex

  automatic speed

  card crypto Petaluma_1

  Given that the pix will attempt to build a VPN tunnel to 1.1.1.2 map encryption Petaluma_1 must be applied to FastEthernet0/0, not FastEthernet 0/1.

  Let me know if it helps.

  Thank you

  Loren

• I have disable debugging the scripts, but it turns! is this a virus?

  I have a Pavilion dv7, I'll tab in tools, Internet options, click the Advanced tab, and disable debugging scripts, but in a short time I get the message to turn off the script, again the tab tools, etc. and it is clicked again once, I tried to click on these tabs and restart my computer, but it maintains that the script turned off in the 1st window I use it!   It's annoying to anyone can help?

  Run Microsoft fixit below link

  http://go.Microsoft.com/?linkid=9646978

• debug output is not

  My suddnely of CF9 server stopped showing debug output. Debug output is set to Yes and I have the correct ip address. I even tried < cfsetting showDebugOutput = "true" >, but nothing appears. Any ideas?

  Found the problem. When upgrading to Windows 10, the prioritised card vpn setting the IP Address of the server instead of my local ip. I tried to use the DHCP protocol listed in ipconfig for VPN, but it did not work. Then, I changed the setting of the adapter for the VPN connection to use my local IP address and it worked.

• Not appearing debug output is not with cfmodule

  Hi, I have a problem here I just can't solve. I have a unique model that contains the code in my header and footer called globalheader.cfm which gives the floor to cfmodule (see the code example below). Everything works, the only problem is that the debug output appear not. Debugging is enabled correctly and presents itself if I remove the tag to cfmodule call globalheader.cfm. Any help would be greatly appreciated.

  Thank you! It wasn't the answer, but it lead me to it!

  The culprit was the cfcontent tag. I used it to remove the white space. I didn't know it would affect the output of debug too. I commented and now I see Debugging.

• ColdFusion MX 8 Debug Output

  I have installed the edition of CFMX 8 Dev, enabled the debug output, but the output is not displayed. I can access the web pages, but cannot see the output of debuh.
  
  Any ideas on how to solve this problem?

  Don't know why, but it is fixed. Just reinstalled CF 8, reset the debug settings and now it works.

• Disable debugging in coldfusion BY page

  Is there an option in CF (a code maybe inserted on a specific page) to disable debugging in coldfusion BY page (and always keep it together)?
  
  Thank you.

  http://livedocs.Macromedia.com/ColdFusion/6.1/htmldocs/tags-PC6.htm#wp1103514

• CF8 Developer: debug output?

  I have CF8 Developer Edition installed on my Vista Business PC.
  I tried to put the debug output on (in the ColdFusion - Debgiing & logging admin), but I get no results.
  
  On my old PC (CF7 Developer Edition on Windows XP), I had no problem to set this up.
  
  Any idea?
  Thank you
  

  Sorry, I found the solution:
  In the ColdFusion Administrator - Debugging & Logging, I deleted the list of IP addresses, and now it works.

  (empty list means: send the output to all users)

• Write Debug Output to the media under the Simulator map

  I'm testing my application using the Simulator with the eclipse plugin (using the simulated device 9700). Simply, I can't open a file. Here is the code I use:

  try {   // filename = "file:///SDCard/debug.txt"
      fileConnection = (FileConnection) Connector.open(fileName);
  } catch (IOException e) {
      System.out.println("Could not create " + fileName);
      e.printStackTrace();
  }
  
  if (fileConnection != null) {
      try {
          OutputStream out = fileConnection.openOutputStream();
      } catch (IOException e) {
          e.printStackTrace();
      }
  }
  

  Are there settings specific Simulator which must be defined and who could stop me from writing on the SD card in the device? I put 'Use PC file to SD Card file system' and with the path on my PC where I want the file resides. Any help would be greatly appreciated.

  The file exists in your file? If it isn't, your code does not indicate that you create a file.

  So when you try to open an output stream on a file that does not exist, that would not work.

  Steps to follow:

  -Check if a file exists

  -Yes: Open stream and write to the file

  -No: fileConnection.create)

  -Open the stream and write to the file

  PS Don't forget to close the flow of data and file connection when you are finished.

• After using IMAQ RT Video Out, how to return to the string of rt debugging output?

  After having used the video on VI IMAQ RT, the screen image as expected. Then, I want to return to the display console where I can see the RT Debug channels and the processor. Is this possible?

  Infinite,.

  The previous answer is incorrect. It is possible to change the mode back to text video. Just use the "IMAQ out video display Mode" VI for the parameter "Text Mode". This should restore the display of text.

  -Eric

• JDE debug output

  Is there a way to determine what the virtual machine and JVM exit orders mean in the output of the JDE window?

  As far as I know there is no official documentation on which codes and messages.

• Disable debugging messages she draws thirdparty java.util.logging service

  I use java.util.logging api for logging. It works very well. Now I have a third-party library that uses the someother registration service. When I run my application, I see this library third party out tons of debug log messages. How can control which helps Java util without the configuration of the service. Please let me know. I use the Java8 version.

  Thank you.

  You can I want java.util.logging to a third party not related to the logging control framework? It is not possible.

• Device-debug output?

  Hello NDK devs.

  We are trying track down a bug only release device. It seems that symbols are either generated not be loaded by GDB. We use a build managed Momentics. All the parameters or manual control of GDB for this?

  Thank you!

  Stéphane

  Ridicule me. G adding options to the compiler and the linker for the target it's done.