cfldap does not authenticate

Similar Questions

• ACS secondary server does not authenticate users through 3850 WLC

  HI - I have a question that my secondary ACS server does not authenticate users when the primary is taken offline.  My configuration is:

  3850 WLC by using the code version 03.07.00E

  ACS Version 5.6 (primary/secondary)

  The two ACS servers added to WLC (ACS-NLBP-01 (primary) / HEN-ACS-01 (secondary)), defined in the Group server (ACS_AUTH) and also the method list (ACS_AUTH).  List of the ACS_AUTH method is then applied to the SSID.

  A 'test of ACS_AUTH aaa server group' command for the two outcomes of ACS server as a result of access.  Communication IP/Radius is operational between WLC and two ACS servers.

  configuration of 3850 also attached for reference.

  Any help would be appreciated.

  Thank you

  Scott

  Please add the below listed orders and test again when you can.

  Server radius # deadtime $min$
  retransmission of radius-# 1 Server
  # Server radius-dead-criteria times 5 tent 1

  Configuring settings for all RADIUS servers

  HTH

  ~ Jousset

• Secondary ACS does not authenticate

  I install an ACS secondary, database replication works correctly.

  But when I try to use the ACS secondary server to authenticate the user, I can't authenticate successfully.

  In reports and activities (ACS secondary), it does not appear anything.

  In primary school, ACS, he failed attempts, I see an "unknown SIN" the ip address of the secondary ACS, it seems only secondary try to use elementary to authenticate...

  Where I'm wrong?

  Thank you

  Daniele

  Hi Daniele,

  It is because the parameter on the acs secondary proxy. On secondary acs visit acs--> configuration network--> table tell proxy---> bring your secondary acs under the front walk to the box.

  That should fix it.

  Kind regards

  ~ JG

  Note the useful messages

• Account Exchange does not authenticate to exchange server with a domain under Windows Surface 3 pro 8.1 user

  Hello

  We recently bought a Surface 3 pro from our supplier that has windows 8.1 pre installed (OEM) and I have set up a local user with local administrator rights account, I did windows updates, also activated the account administrator local and then added the device to our area, but I can not set up exchange on the domain user account. I also gave this area local administrator user rights, but it does not check the name on the Exchange Server. It makes the connection to the network, on behalf of the research, but it will not connect to the server. I tried to manually configure upwards, but not luck. When I created this same domain account on a local user with administrator rights, I works very well. I did several times on Windows 7 and never had any problems. Has anyone encountered this problem? Help please.

  Thank you!

  Hello

  Thanks for posting in the Microsoft Community.

  As you said you are trying to connect to the domain network, we have a dedicated team with advanced tools and permission to help with such issues.

  I suggest you to send your query in TechNet forum for better support.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Let us know if you have other questions about Windows in the future. We will be happy to help you.

  Thank you.

• App 5.1 server does not not on different VLANS

  Helloooo

  I just installed a new server and I use the server application. Everything seemed to work fine until I moved my iMac to a VLAN different. Profiles and update settings do not push to the iMac and sit at a stadium in waiting. Also to register the new iMacs on the server I get to the login server window and it crashes it and does not authenticate. Screen opens by saying that I can open a second window and registration. When I try to register, I get an unknown error and that it fails. It seems timeless. I tried to change a lot of settings prescribed by other users, but nothing helped. Someone at - it advice on what could be the problem.

  See you soon

  Sean

  Hello

  I took the easy on this way and bring a USB ethernet to my mac so that I have two physical interfaces. An in each VLAN.

  There are other ways to do this, and this is a good article:

  https://blog.Pivotal.IO/Labs/Labs/using-deploystudio-across-Subnets-a-Path-Not-t Aken

  Kind regards

  Erik

• I need to authenticate my copy of Photoshop CS.  Support helped me for CS2 that does not work for CS.

  My copy of elements has stopped working - bought it installed a little over a year.  Don't have the key.  (He was not with the documents rare-don't not buy HP)

  So, pulled the copy of PS cs.  Is installed in WIndows 10 without problem-except Adobe is no longer authenticates CS and technical support was no help. They gave me a link for CS2, which allows me to download CS2 - but need a serial number. The number of CS does not work.  Another tech support guy gave me a 404 link, and assured me that he would give me an authorization number.  Of course, this does not work. Is it possible to get this thing to work?  I really don't want to pay 10 $par month for software that I bought 3 times already (first we were 7 PS that doesn't install not even earn 10)

  Are you sure you start photoshop cs2 and not your old photoshop cs?

  Go to help > about Photoshop and check the version.

• Firefox does not ask me to change a password stored in the local password database when I change it to a HTTP SVN repo that authenticates via LDAP

  Access to multiple repositories served via HTTP SVN. Authentication is done via LDAP. Firefox is able to save passwords for pop up dialog boxes provided by the SVN server for authentication. Periodically, I change my password for LDAP in Active Directory. When I access the SVN rest once again, I have change the password is entered in the dialog box, but Firefox do not ask me to update. Earlier (FF 3.x), Firefox asked me to update the password in the stored passwords. With FF 7.0.1 it does not prompt me for that and retains the old password.

  Original description:

  Let's say that I kept the password for some sites. As time goes by, I change the password on this site. Now, the next time I connect, password manager offers to enter my old information. I type in my password and enter the site. Earlier (FF 3.x), Firefox asked me to update the password in the stored passwords. With FF 7.0.1 it does not prompt me for that and retains the old password.

  OK, I feel like a fool. Turns out that the HTTP Server was in the list of exceptions, but under his own 192.168.X.X IP address rather than the hostname of our SVN server resolved internally. I missed which I was looking for the host name. Once I removed the IP address of the exceptions list entry, the problem has been resolved.

• Xcode is based, but does not work

  Hi people,

  I have a problem with Xcode

  When I try to launch a project, it generates correctly and then just says "running < name >: < name >»

  Some time previously, I have worked on some projects of iOS and at the time, everything worked fine.

  Not even that, they run more.

  I don't know why it stopped working in the simulator of the app is just a white screen.

  Mac OS projects with cocoa does not even launch the built application. Console applications do not work or the other.

  I had this behavior with XCode 7, then tried the beta version 8, which also had the problem.

  This morning, I decided to uninstall XCode and reinstalled version 8 of XCode from the App Store.

  The problem persists there.

  IM under OSX 10.11.6 and Xcode Version 8.0 (8A218a).

  Please help me, I'm getting desperate. I can't develop this way.

  Best regards

  Alex

  I would check to see if there is a modal dialog box, asking you to authenticate before running your application:

  

  If you don't authenticate you request probably will not work

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• Outlook for Mac 2011 does not accept my e-mail and password on the account configuration.

  Hi, I entered my email and password correctly, and Outlook said that could not authenticate the gmail server...  Does anyone know how to fix this?

  I thought about it!

• WiDi does not work on Toshiba 46TL938

  Hey there,

  I tried to access the WiDi on this TV, but it does not recognize the laptop.
  I also tried to search the laptop to the TV but the 'list of pc' in TV was not available... in gray letters.
  We hope to get a response.

  Thanks :)

  Hello

  I doubt that the issue of the Intel WiDi is related to this TV.
  Everything you can do on this TV is to verify if the Intel WiDi is activated in the menu of TV s.

  Press QUICK to open the Quick Menu. Intel Wireless Display and click OK. A prompt appears on the screen. Then, select Yes. Launch the Intel WiDi on your PC software and select scan available adapters. Name of the device Intel WiDi and list of identification will be displayed on the PC screen.
  Select TV which you want to connect. Connection will be shown on television.

  If you connect your PC to your TV the first a 4-digit code appears on your TV screen. This code must be entered in your computer to authenticate the connection. If authentication has already occurred connected to Intel® Wireless Display. Please wait will appear on the screen. Once the Intel WiDi connection has been completed, the TV screen reflects the content shown on the PC screen.

  _NOTE: _
  When Intel WiDi connecting, the PC must have power turned on.
  When the InteL WiDi software is active, other applications may not be usable.
  Intel WiDi of the TV device name is modifiable by the Intel WiDi software.
  If the PC has been idle for a while, the Intel WiDi connection is disconnected automatically.

• Admin does not count completely administrator

  Hello

  I just do a fresh install of the latest version of Mac OS X (10.11.4) yesterday and I set up all my accounts, applications, plugins, etc.

  I met a problem when I wanted to install my VPN client. The installer would not lance. I contacted their support and they suggested that my account privileges were defective. I had to do a second admin account and try to run the installer it.

  I tried this and it worked! The installer would launch as it should. This means however that my first created account (created when you set up when you first start) is broken and not completely an admin from my laptop. The check mark from the admin is checked in the settings of the system, but apparently due to a bug I am not allowed to run .pkg installers or authenticate the VPN client to change my network configurations. When I get the pop-up to enter my password it just comes back. I also tried to use the account name and the password of the second account, but it does not work either.

  I could move all my stuff on the newly created account, but that would mean I have to reconfigure everything. It would be very boring, because I did all this and it's a lot of work.

  Someone here who has the same kind of problem? Or someone who knows how I can get my return permissions, or use the second account to authenticate the changes?

  Thanks in advance!

  Henk

  PS: I use a Macbook Air, mid-2012, 256 GB SSD, 8 GB RAM, i7 processor.

  I came across administrative accounts that are damaged over time, and while there might be ways to fix permanently, I don't know if these solutions work in the long term. My experience with this is all first what you did and what you're doing now are reluctant to do, which is migrating from the old account to the new as it will deal with any problem hiding maybe you will see down the line.

  What do not stress is that you creat now with Time Machine before performing a backup if you have not already

  migrate the old account to the new, then delete the old account and make an archive of it.

  reboot into the new account

   > Preferences system... > users and groups

  Select the old account, tap on ' - '.

  Follow the prompt to make a copy of the account when it is deleted.

• Satellite L300-2CJ - WLan will not authenticate

  I bought a brand new Satellite Pro L300-2CJ under Vista Home Premium SP2, the week last to my teenage son.
  I am unable to get the wireless to work, because I have two wireless routers, a WEP running and the other running WPA2-PSK, but I can't connect to any of them from the laptop.

  I have updated driver Atheros AR5007EG to the latest version from the Toshiba site (version 7.7.0.228) but am unable to authenticate when connecting to each SSID that is displayed in the available wireless networks.
  Get event network 6100 Diagnostic ID, Code of task (12) each time, with the following details: -.

  + Helper Class (RNWF MSM helper class) event: +.

  + Class event Helper Diagnostic wireless +.
  + For all the info on this session see the Wireless Diagnostic informational event. +
  + Helper class: Native WiFi MSM +.
  + Initialize status: success +.
  + Connection being diagnosed information +.
  + The interface GUID: 95619326-4e63-4ded - 89c 8-e58315c5790d +.
  + Name of the interface: Atheros AR5007EG Wireless Network Adapter.
  + Interface type: Native WiFi +.
  + Profile: Discovery connection +.
  + SSID: BowyerHomeORANGE +.
  + SSID length: 16 +.
  + Connection mode: Infra +.
  + Security: Yes +.
  + Connect even if the network is not broadcasting: No. +.

  + Result of diagnosis: problem found.

  + Root cause: +.
  + Windows cannot connect to "BowyerHomeORANGE".
  + Wireless association failed for an unknown reason. +
  + Detailed root cause: +.
  + 802.11 connection failed due to status 1 code: unspecified failure +.

  + Repair option: +.
  + Try to reconnect to "BowyerHomeORANGE." + "
  + If the problem persists, contact your network administrator or hardware manufacturer for further assistance. +
  + Event Verbosity: 0 +.

  I am tearing my hair out trying to understand why he does not connect and you'd be grateful for any help that can be offered.

  Thank you

  Mike.

  Hi foghorn,
  your access point sends the ssid? make visible to the customer.
  how fast is used? turn to auto for the tests.
  do not use encryption for the tests.
  remove all the favorite wlan (laptop) connection
  Make sure that your access point does not use mac filtering

  Let us know if this tips worked for you.

• Business app does not work after reinstalling Windows XP

  Original title: program programs application Applications compatibility

  I have an application that runs on the client computer with XP.  When I run the application, it will be all first authenticates the user by collecting the ID of the system that must be registered with the key to series given by the owner.  Once the registration takes place, then only, the application should open. Recently, I had to reinstall XP Pro (SP3) on my PC. Now, the same application when it is running on my PC with XP or laptop with Windows 8 with compatibility to XP, it does not jump the authentication window, instead, directly opens the application.
  Without authentication, the application should not open. What is the solution.

  Hi Santosh,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=windowsxpitpro

  I hope this helps.

• XP Professional will not authenticate

  The place I used to work closed at the end of November, and we were given computers from the site after that that they were washed all the information of the company. Computers are manufactured by Dell, Optiplex 320 laps. Windows XP Professional has been installed, and Windows (with additional Dell logo) official sticker on the Tower gives me the product key. When I turned on the computer for the first time, he asked the product key during the installation, and I have provided. I was not connected to the Internet at this time, the computer was not near an Internet connection.

  When the computer is now connected to the Internet, the computer fails validation. When I try to authenticate the computer, I get the message "Windows has not yet been activated with a genuine product key."

  -It is a valid XP Professional key product, provided with the computer at the time where he was purchased by the owner, the computer was purchased by the owner through Dell.

  -The activation request does not appear in system tools, even if I see a star down near the clock in the system tray/notification area.

  -This key has been previously used on this computer before it was wiped out.

  Never mind.

  I rebooted, tried again and this time it worked.
  I should have recalled the first rule of troubleshooting, mea culpa.