Admin does not count completely administrator

Similar Questions

• Run as admin does not

  Run as Admin does not (UAC active), I get an error that says: Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  My account is admin and I still get this problem.
  If I disable UAC and then I still get the error.
  The strange thing is that when I restart my computer run as Admin works once, then stops again.

  Also if I right click on an exe which requires administrator privileges and then he rowed for a while, then opens the menu, but any other exe opens the menu immediately.

  Hello

  I suggest you try the steps from the following link:

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244

• Watch does not recognize the weight class as exercise-how can you add the duration of activity manually because none of the presets eg elliptical etc. is appropriate. Also does not count calories for example 35 when the rest of the group is around 500

  Look does not recognize the weight class as exercise-how can you add the duration of activity manually because none of the presets etc for example elliptical is appropriate and therefore do not count toward the daily goal. Also does not count calories for example 35 when the average of the others in the group is around 500.

  Hello

  When you use the application of the training session, choose the type of activity that best fits your business. For anything else - like weight - select the other category.

  During the follow-up of one year to the next helps:

  • Activity app will credit the ring of progress of exercise with one minute for every minute of the workout.
  • Active calories will be based on the data recorded by the heart rate sensor or a brisk walk, whichever is greater.

  Note, however, that the heart rate sensor is likely to give better results for the workouts that involve rhythmic (for example running) rather than the irregular movements.

  More information:

  Use of the workout on your Apple Watch - Apple Support

• IP ISP lease time does not count on E3000 router

  Hi all...

  I just installed an E3000 router and have updated the firmware on the support site. I noticed that when I look at the router status page, the term of the lease IP ISP seems to be stuck and does not count down. When I reboot the router time will change, but it does not change as it should without a restart or a Relase and survivor.

  I am connected to the service of Time Warner Road Runner as my ISP...

  Does anyone else have this problem?

  Is this a known issue?

  Routers Linksys tells you only when the term of the lease ends.

• System does not accept the administrator password when you want to delete file system

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I downloaded bandoo and Yahoo since then I had nothing else problems. It's not my computer that I use, but I don't have the permission from the owners to use this computer. I have no problem signing into my account, it is impossible to connect and it does not recognize its administrator password to remove these items from the computer. I tried all that I know (which isn't much). Please please help me!    Also, I think that's why I can't return and before restore point I made this big mistake.

  Janice50

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• System Restore: what point I choose theactionalways does not restore complete

  What point I choose theactionalways does not restore complete

  Try to restore the system in Safe Mode.

  Shut down your pc (if you can't for some reason any then press and hold in the power switch until the pc shurs)

  Now start pc you and start immediately to press the key F8.

  you will be presented with a new screen where you can choose Safe mode (use the arrow keys on your keyboard to navigate through the screen)

  Now restore your system.

  * Very often Norton users have problems, perform a system restore, an error of "restoration incomplete... your computer can not be restored"would be seen after trying a restore point. " New versions of Norton have a setting where you can uncheck/disable 'symprotect anti-forgery protection. " ... older versions have "enable protection for my Symantec product." ... Uncheckiing should be temporarily. Unchecking these settings would mean you wouldn't need to go into safe mode to try the restore.

  More information here;

  http://bertk.MVPs.org/html/symantecdoc1.html

• How adobe does not count the activations?

  How adobe does not count the activations of computer for this product.  I activated 2 computers, disabled 2 computers and then tried to activate another, only to be told that I got too many activations.  I tried to use my new Sony reader and was told by Sony that it was a question of adobe.  I talked to adobe to be told that it was a computer problem.  I have a new Christmas gift which is totally unusable!  We should be able to understand it!

  Please give me some help here!  It was a very expensive gift to have just sitting around.  I should have gotten the KINDLE!

  You should only withdraw the authorization if:

  -You give the computer

  or

  -You must decidied use a different AdobeID (and give up books associated with the old AdobeID).

  This is the last that can cause you a problem as Sony software

  I guess at this point you have submtted a case of taking in charge of web ( http://www.adobe.com/support/digitaleditions click on 'Submit a web case')

  Reset the number of activations is a relatively simple application, that our support team can support, and who should get so that you can re-enable the computers.

• El Capitan does not recognize my administrator password after installation.

  Downloaded El Capitan. Installation complete but then cannot access as will not accept my. admin password.

  Admin password checked using to unlock various items in the settings before starting the installation and download of Capitan. Someone has encountered this before and knows how to solve this problem?

  If you can successfully download and install El Capitan. You can also successfully use the admin password to unlock items in settings (I think you mean system preferences). So exactly what does not work?

• Stream 7 BIOS password HP does not / Bypass Pass administrator BIOS?

  My problem is that cannot get the BIOS of HP 7 flow.

  • After pressing 'Power + flight upwards' it leaves me the "Start menu".
  • When I press F10 to enter BIOS he asks me to "Enter the administrator password"
  • After a few attempts, I finally got the message: ' disabled system [51999598]
    (I can restart the device and go to 10 Windows again. It does not freeze the device or whatever.)

  What I've tried so far:

  1. The main entrances. -A few grabs, 0000 to 9999-1234 etc.
  2. Updated the BIOS with HP Support Assistant / driver update.

  Information about the device:

  Born on Date 26/02/2015

  BIOS factory was "F.06", is to show after "F.0E" HP update

  * Note that even before the bios update I couldn't because of the password BIOS.

  The unit was new, no password was never intended for this device.

  Y at - it a method to change the admin password?

  Thanks in advance!

  Hello:

  Please read the first post on the link below, which should solve your dilemma.

  http://h30434.www3.HP.com/T5/notebook-operating-Sy...

• software installed as that user admin does not work when logged in as standard user

  Running a desktop computer dell with XP SP3 home edition with no possibility of wifi

  Bought the USB adapter wireless and successfully installed the software and connected to the router connected as a user with administrator rights. When I connect software standard user being their but does not connect to the router. ? Standard user family security enabled, I disables it, but it makes no difference.

  Thanks for your suggestion, yes tried and it works when I connect as long as the user admin with a password even if I'm in the standard account. However he does not remember the settings, so whenever you access the standard account you must connect as admin users that would amount to giving the password to the admin of my grandson who defeats the object to have its own user account.

  But I solved the problem, when I looked in C:\documents and setting\admin data User, I found the folder for the software with an ini configuration file and a profile ini file. The profile ini file was missing in the same application for standard user folder. When I copied the file across and made a minor change to the standard user configuration ini file is the file of users admin everything works fine

• System does not close completely down.

  Hello

  I have a Pavilion laptop, G6, with Windows 8, and it seems not entirely closed. It will go to the closure of screen and then the screen turns white and the laptop seems to be in a low power state. Start button / stop is turned on and the Wifi button.

  I tried:

  • Removing battery
  • System restore
  • Remove the battery and hold the power button for 20 seconds

  Any help would be popular!

  Appreciation,

  Windows 8 comes with diagnostic tools very good - if you have not had previous experiences, their execution, this is probably a time familiarizing yourself with the Toolbox:

  Laptop computers HP - test of hardware failures (Windows 8) - c03467259

  The issuemight be if the system shutdown due to software, in other words, something in the environment of OS, then it might be in the BIOS (down a real operating system level) or in the material.

  This does not mean you na not miss something in the operating system-, but there are tools to help you refine the hotbeds of tension of material possible and eliminate these in the list.

  What to do next?

  If the extracted material - if you can't find the problem, if the problem is hardware, or if the question remains a mystery and you're ready to throw your computer out the window beautful - wait!

  You didn't have the system very long if you're running Windows 8 on - call HP directly for assistance.  If the system experiences a hardware failure, the call earlier rather than later is better.  It will not very long to fix.

  Before you call HP:

  Run the command "SFC/scannow" at startup or in Windows 8

  ==================================================================================

  • Make sure all your drivers are up to date - they are, or you wouldn't ask for help - it's basic Admin 101.

  Start by creating a place to which you can go back in case things do not work as you expect:

  Create a restore point

  Install the software and drivers from the HP site

  Go to the top of the page of the forum Support and drivers HP

  • If you are prompted, enter your country or region and
  • Enter your computer model information
  • Access to the software and drivers...
  • Enter your operating system from the menu drop-down...  Scroll to the bottom
  • Select the desired category Software - Solutions > driver - keyboard, mouse and input devices

  NOTE: Download ONLY the concerned drivers and software for YOUR hardware - note that in the website you can find more than one kind of driver for more than one computer model - it's normal, but it does not mean that YOUR computer uses all proposed software.

  • Develop and decide if you need to install this package.
  • Make sure that you download and install only the latest versions of each driver or program.
  • Save the Setup *.exe appropriate on your computer package

  NOTE name and location -likely the *.exe file to save to "downloads".

  • Install the software / driver installation package: If you have control of "Admin", you can highlight the package and "double-click" to install, if not right click, select "Run as Administrator" and install.

  NOTE: sometimes there is a lot of information in the computer Web site.  Take a look at what's available and bookmark the page later.

  ==================================================================================

  If you decide to update your BIOS,

  • Disconnect all the USB drives
  • Always run power cable
  • Do not touch the system while the update is in progress
  • Optional: leave wireless touch YOU, but turn off the router (make sure that there is no interruption)

  ===================================================================================

  • Make sure your system is saved AND make an Image of your system in case you need to send to the computer for repair:

  History of files is very easy to use.  He works on 'Libraries' and essentially backup of your default user account.  To add a folder to your libraries, right-click on > add to library > if you have the 'create new library '.  Pouf!  The folder is added to the history of the file backup.

  If you do not have a hot spare hanging out for your file history to write, buy a 64 GB USB key and use it - Poof! Instant historical destination of files disk.

  HP - backup of your files (Windows 8) computers

  A custom Image for the 'rest' of your computer - Nice:

  It's the Windows 8 Refresh , which also backs up your programs / applications.

  Create a custom recovery tool to update your PC in Windows 8

  When you call HP:

  Have your information at your fingertips: product number, serial number, contract number (if you have CarePack)

  • Be prepared to tell your story to more than one person.
  • Be polite, persistent and articlulate.  Don't waste time yelling at the tech.  They have lives.
  • If you do not speak to someone who understands your problem, ask to speak to someone else.  You have the right to be heard.
  • Be Polite, persistent and be prepared to repeat yourself (as I do here).

  Good luck!

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  See a Post that is useful, makes you smile, or who teaches you something you didn't know?

  Your HP Experts are here to help.

  Click on the Stars Kudos to say thank you for the help.

  When a fix / workaround is successful:

  Click on this message "accept as Solution" to make it easier for others to find the Solution.

  Year of 2012 2013 snake Dragon

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

• Store does not recognize my administrator user account when you try to upgrade Windows 8 to 8.1 Windows

  I bought an Inspiron 17 7737 directly from dell.com on 05/12/2013.  It was delivered 12/182013.  The operating system was Windows 8.  I had assumed that he would have the last version of Windows when it has happened since 8.1 was released in October. I opened the app Store and the Windows 8.1 upgrade was not available for me.  I realized it was one problem for others and that he has not pursued further at that time.  I was out of town for 2 weeks in January and has not used the laptop during this 2 week period.  When I got home, I opened the store and found placed prominently on the invitation to the free update to 8.1. I signed up using the administrator account and when I hit the download button for 8.1. I received the message "You must use an account with administrator privileges to install Windows 8.1, try connecting with the user of an administrator on this PC account and try the update again".  I checked my account has administrator privileges and tried again and got the same message. I created another user account and gives privileges to administrator and try the download again signed on this account and received the same message.  I called technical support and for more than 5 hours on 2 different days, the technician tried to solve the problem by uninstalling and reinstalling the Windows updates. When that has not resolved the problem, it "refreshed" my PC which I understood to be given to the State at the time of delivery. He had to do all the Windows (about 65) updates and tried to re-download 8.1.  This does not change the error message when you try to download at 8.1.  At that time, I was told that they were raising a technical team that search every newspaper in my machine and find a solution.  They said they'd call me at the time where there is a solution. Although my administrator account has not been recognized during an attempt to make the download 8.1, it acknowledged the role of the administrator when the technician needed administrative approval to all uninstall and reinstall activities in trying to solve the problem.

  Everyone knows about this problem?  It is resolved, and if so, how is it resolved?

  You are not alone. Many have had the same problem with no resolution. I think there's something funny to do with user accounts. Making a second account with admin privleges does not work. I would try to reinstall the operating system of hidden image and try again. A refresh like tried Dell will not do because it retains much of the data before the update; you need a clean start. Do nothing witht the account Admin other than to let Windows put up and set your password. All updates must be installed before the upgrade is displayed in the store. I have improved five facilities to win 8 and have had zero problems.

• Firefox does not close completely.

  So since I have updated to the new Firefox it does not completely close when I hit X to close. Then the next time I go to open it it says something like ' Firefox is open but does not close it before trying to open it again. Has not done this before and is getting pretty annoying having to open my task manager everytime I want to open Firefox.

  Is this a new problem with the new update, or something else in conflict?

  In case you use 'Clear history of Firefox closing' and then try to disable this feature.

  • Options > privacy > Firefox will be: "Use the custom settings for history": [] 'clear history of Firefox closing. "

• Ex2700 admin / admin does not work

  I try to install my ex2700 extender

  but when I run the wizard on

  http://www.mywifiext.com

  When I go to admin/admin, it does not work I need an idea please!

  Hello zdyby007

  The login is admin/password not admin/admin

  DarrenM

• printer is offline but but does not print completely baffled!

  Completely stumped with this. I have a brother MFP990 all in a station. It is connected wireless to my network. I have a laptop computer connected wireless network and it prints fine. My desktop computer, but does not print even if it seems to recognize that it is there. The printer is communicating with my computer and let me know the ink level is low. My scanner works perfectly and scans the computer, no problem. But whenever I try to print, the computer tells me that the printer is offline. I tried to disable Norton firewall, no difference. I tried to uninstall the software, and oddly enough, during the uninstall process, an exceptional print request was printed! When I reinstalled, same problem. Any ideas?

  Hi, Frank,.

  Open the event viewer > application log

  After return that error messages/event ID is related to the question of the printer

  Start > right click on computer

  Select manage

  Select event viewer > application log

  In the meantime, try the following:

  Start > type Services.msc
   
  Press enter
  Scroll down to print spooler
  Right-click on the spooler > select Properties
  Make sure that the Startup Type is set to automatic
  Under the service stop status
  Wait for Windows to stop the printer
   
  Control Panel > open the printer folder
  Right click on the printer icon > select Open
  Do you see the documents listed in the queue for printing?
  Click file > cancel all Documents
   
  Start > right click on computer > select Manage
  Click on continue on window UAC (Vista, Windows 7)
  Select Device Manager
   
  Click on the + sign next to Ieeee... compatible printer
  Right-click on the printer driver and select uninstall
  Click on the + sign next to the imaging device (s)
  Right-click on the printer driver and select uninstall
  Click on the + sign next to printers
  Right-click on the printer driver and select uninstall
  Click on the + sign next to Bus USB controllers
  Right-click on the printer driver and select uninstall
   
  While the printer is turned on, unplug the cable from the rear
  Unplug the cable from the wall outlet
   
  Wait 5 minutes
   
  Plug the cable into the wall jack, and then the back of the printer
  Restart the computer

  Go back, and then restart the print spooler
   
  Go to the manufacturer's website and search for updated drivers