Challenge updates

Similar Questions

• Problem with KB28083821 and KB2855336 updates

  When Microsoft will challenge updates KB28083821 and KB2855336 so that they will not install on Windows 8. Have you tried many times to install and have failed since the first day on two different machines? In addition, Microsoft FIXIT is never available and works with Windows *?

  I have similar problem - Windows Update does not pass the 45% downloading KB2855336. For each batch of updates, there are 1-2 updates Windows Update can not download completely. I tried the steps above (method 1), but they did not solve the problem. I use Windows 2012. I had no such problem with Windows 2008 or Windows 2003.

  The troubleshooting link is a waste of time:
  Have you tried to install the update manually?
  No, because I want to know why I always need to do this for 1-2 updates each batch of updates.

  Is there enough free space on your PC?
  Yes it is.

  There are mistakes that are just a matter of bad timing, and they can be caused by busy websites or Internet connections or a number of other factors.
  The download of KB2855336, which is 83KO, always stops at 45%.

• OPS challenge exercise tutorial: used several steps update

  I've tried employee update exercise Challenge: create a Multistep update. I finished full extercise. However, I see a problem when it runs. There are 3 pages including details of the employee
  Assignment of
  Review and submit
  
  When I chick on Train page title, it properly accesses the corresponding page and also values the drop-down list box. Once the values are added and I navigate to a different page through train when title value in the drop-down list box does not change.
  
  When I'm on the 2nd Page (assignment), it does not back next to the button cancel button return button show same problem when I am on the 3rd Page appears
  When I am on the last page (review and submit) it does not show the previous button. It shows the next button even when he is on the last page (does not display next button)
  
  When I banded next or select the Drop Down list box I get following error.
  
  Details of the exception.
  
  oracle.apps.fnd.framework.OAException: this application was not processed demand OA.jsp%3Fpage%3D%2Fkamlesh%2Foracle%2Fapps%2Fak%2Femployee%2Fwebui%2F+EmpAssignPG%26_ri%3D601%26_ti%3D1104118061 URL containing potentially illegal or not coded characters. Please try again by submitting a valid URL or contact your administrator for assistance systems.
  at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1223)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1987)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:509)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:430)
  in OA. jspService(OA.jsp:33)
  at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
  to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:803)
  at java.lang.Thread.run(Thread.java:534)
  # # 0 in detail
  oracle.apps.fnd.framework.OAException: this application was not processed demand OA.jsp%3Fpage%3D%2Fkamlesh%2Foracle%2Fapps%2Fak%2Femployee%2Fwebui%2F+EmpAssignPG%26_ri%3D601%26_ti%3D1104118061 URL containing potentially illegal or not coded characters. Please try again by submitting a valid URL or contact your administrator for assistance systems.
  at oracle.apps.fnd.framework.webui.OAUrl.validateURL(OAUrl.java:2205)
  at oracle.apps.fnd.framework.webui.OAUrl.createURL(OAUrl.java:1088)
  at oracle.apps.fnd.framework.webui.OAUrl.createURL(OAUrl.java:614)
  at oracle.apps.fnd.framework.webui.OAUrl.createURL(OAUrl.java:407)
  at oracle.apps.fnd.framework.webui.OAPageBean.createURL(OAPageBean.java:2061)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1776)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:509)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:430)
  in OA. jspService(OA.jsp:33)
  at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
  to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:803)
  at java.lang.Thread.run(Thread.java:534)
  oracle.apps.fnd.framework.OAException: this application was not processed demand OA.jsp%3Fpage%3D%2Fkamlesh%2Foracle%2Fapps%2Fak%2Femployee%2Fwebui%2F+EmpAssignPG%26_ri%3D601%26_ti%3D1104118061 URL containing potentially illegal or not coded characters. Please try again by submitting a valid URL or contact your administrator for assistance systems.
  at oracle.apps.fnd.framework.webui.OAUrl.validateURL(OAUrl.java:2205)
  at oracle.apps.fnd.framework.webui.OAUrl.createURL(OAUrl.java:1088)
  at oracle.apps.fnd.framework.webui.OAUrl.createURL(OAUrl.java:614)
  at oracle.apps.fnd.framework.webui.OAUrl.createURL(OAUrl.java:407)
  at oracle.apps.fnd.framework.webui.OAPageBean.createURL(OAPageBean.java:2061)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1776)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:509)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:430)
  in OA. jspService(OA.jsp:33)
  at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
  at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
  at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
  at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
  at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
  at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
  at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
  at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
  to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:803)
  at java.lang.Thread.run(Thread.java:534)
  
  I would apprecaite if someone has an idea of what might be the real cause of this problem. Your help would be a great favor for me.

  Use this code in the processRequest of EmplyeeUpdateFooterCO

    public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
    {
      super.processFormRequest(pageContext, webBean);
       String firstName = pageContext.getParameter("FirstName");
       String lastName = pageContext.getParameter("LastName");
       if(firstName != null && lastName != null)
       {
        String FullName = firstName+" "+lastName;
        pageContext.putTransactionValue("empName", FullName);
       }
  
  //Rest Code here
  
  }
  

  Thank you
  AJ

• Cannot install the update froyo for a Singapore bike challenge using SSM

  Hi all

  I have a defy (no blurring) bike that I bought in Singapore. Now I'm in India. My network is airtel. When I connect the phone via USB and run the update of the software of bike it shows available and downloaded the update. After that he asked me to continue. Installation began, and the phone went to the bootloader mode. He continued up to 15%. Up to 15% it stopped and error. I tried 5 times and also with another sim card. I doesn't seem to work. I have the same problem again and again...

  

  

  I also tried to connect my phone in wifi and tried to download, but it says "Update service unavailable this time."

  My version is GAS_ASIA_USAJORDANRTINT_P030 which is supposed to get updated according to the official update thread.

  Is this a problem with the SSM?

  If yes how do I remedy this? Is there an alternative?

  Here's the quote from https://supportforums.motorola.com/message/377672?tstart=0 that says I'll get an update

  Singapore:
  Retail trade, Starhub
  other regions may be able to update, if the firmware of the source is one of the APflex versions below:
  versions source:
  GAS_ASIA_USAJORDANRTINT_P029
  GAS_ASIA_USAJORDANRTINT_P030
  will be upgraded to Froyo:
  GAS_ASIA_USAJRDNFRYORTINT_P011
  

  Kindly help me... Thanks in advance...

  Hi all

  I did atlast. Yo, I got froyo now m /.

  Here is the solution.

  MOTOROLA SOFTWARE UPDATE (MSU) DOESNOT WORK IN WINDOWS VISTA OR 7.

  WINDOWS XP ONLY TO update YOUR PHONE.

  Thanks for your replies so.

• FDM & ERPI to FDMEE - update approach/challenges?

  Hello

  We are in FDM/ERPI 11.1.2.2.300 (used for loading the data of EBS systems and files in HFM 11.1.2.2.300) and planning to upgrade (in the existing environment [upgraded on-site]) to 11.1.2.3. As we see that FDM/ERPI are integrated together as FDMEE in 11.1.2.3, we had gray on how FDMEE would work contrary to FDM/ERPI disparate large area.

  We needed contributions from veterans, or anyone who had lived the upgrade to answer subsequent queries.

  Queries:

  [1] we have come to know that the FDM and ERPI are integrated together as FDMEE in 11.1.2.3.

  [a] since we have FDM and ERPI as separate components in 11.1.2.2.300, how should set FDM and ERPI components upgraded to FDMEE? Specific measures which must be followed to approach?

  [b] are there any known issues / challenges involved in the upgrade of disparate FDM & ERPI to FDMEE?

  [c] how would work artifacts (11.1.2.2.300) ERPI in FDMEE - is there any specific migration, or any required manual adjustment after upgrade (11.1.2.3) to have artifacts of the ERPI (as the system source, time mapping, location, import formats, data load mapping etc.) running in the FDMEE?

  [d] Similarly how artifacts FDM (of 11.1.2.2.300) would work in FDMEE? Are there specific migration or manual configuration required after upgrade (11.1.2.3) having FDM artifacts (such as mapping, validation etc rules) running in FDMEE?

  [2] since only ODI 11.1.1.7 is compatible with 11.1.2.3 (from the compatibility matrix), how we improve 11.1.1.6 to 11.1.1.7 ODI? Y at - there a patch available to upgrade or should we uninstall ODI 11.1.1.6 and install 11.1.1.7 ODI?

  Any insightful answer will be helpful for us because it will help us gain clarity/confidence and comfort in the upgrade to 11.1.2.3.

  Kind regards

  Sirot

  Hello sirot

  That you upgrade 11.1.2.2.300 for EMP 11.1.2.3 (in the existing environment [upgraded on-site]), it is called application patching EMP 11.1.2.3 on EMP 11.1.2.2

  [a] when you apply the patching, FDM 11.1.2.2 gets upgraded to FDM 11.1.2.3,.

  and ERPi gets upgraded to FDMEE 11.1.2.3

  [b] I have not encountered any questions while improving the FDM

  [c] Please check epm_install.pdf for EMP 11.1.2.3 for upgradation to FDM and FDMEE task (see page 257 / 258)

  Kind regards

  -DM

• update via Windows iTunes 10

  I just bought an iPhone 6 (first smartphone) and it seems that iTunes is the hub of a lot with this phone.  My Mac is running 10.6.8 and I can't update iTunes with it.  I will not update Mac, so I understand that I can't share music, which is fine since downloading music is not my thing.  However, it seems that I have to update iTunes.  We have a laptop under Windows 10 which I think that I can download iTunes (Yes?).  Can I use this to keep my current iTunes?

  Sorry, this has already been addressed - so many messages and I'm not getting a clear understanding as I'm a bit "technically challenged".

  Thank you for any help or advice.

  Yes you can, and if you like and old mac's for her, you can install windows 10 in a virtual machine running osx with virtual box free oracles

• The record in the page of continuous auditing research on and never populates a list of plug-ins to update

  I can watch more videos is because my Flash is obsolete. I followed the links to update plug-ins - but it will not populate a list for arriving at step 1. Simply, it continues to run. I am totally disappointed because I don't want to have to switch browsers.

  Go to https://get.adobe.com/flashplayer/ to download and install the latest Flash Player (make sure Firefox is closed while install you it). Please note that 3 more critical security holes have been exposed over the weekend Flash and Flash is still vulnerable to attacks. Adobe will release an update for this week to meet these new challenges.

• ESR 31 to 38 ESR FX Fx update reach the functioning of business Web applications?

  Hello
  We're set ESR Firefox as default browser in our society. Before we have tested and updated our desktop tools to make sure they work and is displayed correctly with FX. We tested with FX ESR 31.3.

  After the recent release, we now hesitate what version of the browser to deploy: old ESR31 or go directly to the new ESR38.

  Question: what is the risk involved? can we assume that all the apps that worked with the previous version of ESR even would work with the new? Or should we rather re - test applications before you go for the new version and install the ESR31 (which will be soon not supported).
  Thanks a lot for any help in this matter.
  Tom

  Please, do not assume! Since you probably have enough challenges, I recommend IS 31.7.0esr, which is the output may. I think there will be an update more in a few weeks, from 31.7.0esr to 31.8.0esr (based on the chart of the roadmap in https://www.mozilla.org/firefox/organ.../faq/). If you have several weeks to prepare thoroughly for ESR 38.

  Here's the reasoning:

  Because the ESR series gets little other than priority security patches updated, there are thousands of changes to the ESR 38 vs ESR 31. It include increased criteria for security protocols and SSL certificates to changes in the way Firefox styles pre tags (it is no longer wrap text unless you used the white-space: pre-wrap style for them).

  You can get an approximate overview of the changes possibly affecting your apps by reading all the articles in this series of Firefox 38 back to Firefox 32 (links at the bottom of each page):

  • 38 of Firefox for developers: https://developer.mozilla.org/Firefox/Releases/38
  • Compatibility of the site for Firefox 38: https://developer.mozilla.org/Firefox/Releases/38/Site_Compatibility

  But there is really no substitute for the test because these items cannot cover the high points, and you will probably need several weeks for this.

• 10.11.6 updating crippled my Mac Pro

  Problems after update 10.11.6 - system preferences will not open the shutters, can't seem to find any application that opens - reports of damaged applications, including disk utility, console, etc. Reboot and shutdown / reboot erase it. Are here looking for reports - problem seems not universal. Successful update on my MacBook Pro, but my Mac Pro seems today in a desperate situation. The road to recovery and the re-glazed OS X. 10.11.6 was installed. Still no joy. Application folder shows only a naked little and not Apple applications. Cannot open the panes of system preferences. Secure boot does not end. Material OK - can start a clone (CCC) successfully in just a few days ago. Could do a restore (from Time Machine BU), but it's a last resort. Looking for others facing similar challenges and their success to solve the problems.

  Same problem here...

• Outlook 2007 does not open after Windows Vista update 25 August 09 [Qosmio G50]

  I thought that it would be useful to others to post my experience just now.

  Yesterday (25 August 2009) my Outlook 2007 worked perfectly. I had downloaded & installed Outlook Connector 12.1 because I had received an email from Microsoft to say that the DAV protocol used for HTTP messaging would be withdrawn 1 / Sep / 09. I also noticed that MS had restored the POP3 service that they have closed a couple of years.

  Then I configured the POP3 account and started working with that. Everything is OK.

  Last night when I closed, Windows Update came and completed the reboot this morning. Outlook 2007 wouldn't start, coming up with the message: + cannot start Microsoft Outlook. Cannot open the Outlook window. Failed to open all the files. The information store could not be opened. +.

  Nothing that I've done in this environment would allow Outlook 2007 load, I created a new profile and who was not good.

  So I went back to the Restore Point system with the installation of Outlook Connector and everything comes to life.

  I tried also the restore point which challenge the update of Windows, but who does not cure the problem either.

  So, I'll see what happens when I reboot again, in the case where he had nothing to do with Windows Update.

  See you soon

  Very strange
  But maybe the Windows update was really responsible for this problem it is hard to believe, but it's not impossible

• HP: updating Windows stopped 10

  Hello! I had Windows 10 earlier. Just yesterday I was working on my computer and then I decided to restart it because it was a little slow. I chose the option "update and restart", because generally it should not be more than 15 minutes.
  Then my computer started to update is version 10 of windows (without my permission). Now, he works 12 hours and 91% for 4 hours already... What should I do?

  Hi @mariakos,

  Welcome to the HP Forums!

  I noticed your post on how your update of Windows 10 had ceased, with your HP laptop. I am pleased to see that for you!

  What is the number of product/model of your laptop? How can I find my model number, serial number or product?

  In the meantime, please take a look at this article How to challenge Windows Update when it gets stuckand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this article helps!

• Satellite C660 - Windows updates keep turning off my wireless.

  The latest little have disabled my wireless and I was able to get it working again by rolling back by using the system restore.

  The last time this happened (last month) even this does not solve it and I had to let PC World do the.
  They challenge the updates of Windows one by one until they finally restored the wireless.

  Their opinion was to NOT let Windows automatically update my PC!
  The problem I have now is when do I allow an update?

  Sometimes there are important security updates.
  How do I discriminate between them and more importantly why is my Toshiba exposed to these inconveniences and that Toshiba makes preventing them in the first place?

  Hello

  I can't imagine that the official windows updates would affect the Wlan functionality.
  I recommend updating the driver WLan to the latest version available and allow all updates to windows.

  The update of the WLan driver can be found here:
  http://APS2.toshiba-tro.de/WLAN/

• Are displayed solutions / suggestions for action to fix a breakdown "upgrade library" for the mail after update El Capitan 10.11.2 accurate and useful?

  After five days of reading and discussion of the best way to go beyond the grip that appeared during the upgrade of El Capitan 10.10.1 to 10.10.2,"limited that I have no evidence that the steps provided and online by Apple engineers are the real solution.

  System and the details of the hardware:

  Start of OS: El Capitan 10.11.1

  Downloaded from Apple and installed update: El Capitan 10.11.2

  Computer: Power Book Pro, early 2011; 15-inch display

  Memory: 8 GB

  The window "Upgrade library" appeared immediately after the installation of the new operating system (. 2) and to try to use the Mail. The progress bar seems to stall and all messaging functions becomes unavailable. Precious data backed up 10 days before were not available on the computer. Apple consultants advised against the use of Time Machine to reinstall a backup Time Machine 10 - day old.

  Councillors, local and by phone from Apple support, recommended repeatedly running time-consuming terminal and orders of OS that would be to check and fix permissions.

  The activity of "Upgrade library" report Mail appeared repeatedly stalled as it was blocked from the outset.

  Finally, despite the appearance of an interim report to a standstill, I authorized the computer to continue working - even if the same apparent have absolutely no interim report - again - saw on the screen. I left the computer in precisely this configuration for five hours. The progress report on screen disappeared. I restarted the computer and Mail worked now, my data have been recovered.

  There is no evidence of this challenging experience that change the permissions of the home and the user had no impact. It is conceivable that had I was sick from the start, has allowed the computer to work (while the window of progress reported no progress) for five consecutive hours, the conversion of my mail e-mail data V 2 Mail V 3 (what was going on behind the scenes) could have taken place with zero assistance of a technician or the forums.

  Conclusion: I appreciate the hand holding, (perhaps useless) preparation of 'clean' permissions, expertise, training of experienced Apple staff who guided me through the steps of permissions, but there is no evidence of my experience that the stall, I knew was a permissions problem. It is quite possible, based on what I've seen, that just after leaving the computer running his own for five hours, or even overnight, perhaps gave the same result.

  Apple experts suggest that you reset the permissions. I suggest cancelling the computer for an evening, ensuring that energy preferences are set to allow the computer to work constantly without interruption, could give the same result. If the reset of the House / permissions for the user of the BONE and the Terminal are proven steps until the computer crunching to a conclusion, which is not obvious in my experience. It is possible from what I saw just the computer to perform its functions - despite the progress apparently stuck screen which does not indicate that progress - could be a simpler solution.

  If the Apple experts or users know better, is a necessary first step to reset the permissions, I'd be interested to know that.

  PS sorry my fault for typing in the opening graph: it should read 'when upgrading El Capitan 10.11.1 in 10.11.2' (No 10.10.1 to 10.10.2)

• Touble with update channel in time real and unique switching changes of Agilent 34790 channel has example

  I'm trying to control via LabVIEW 34790 has Agilent. I made two sets of adjustments to the example of Advanced Scan I killed the driver but I can't make them work together.

  The first adjustment is to update channels selected in real time as opposed to having to stop the operation of VI to the entry of new. The second change that I've done is to make sure that the instrument is not switch when only one channel is selected. The unit will switch the channel to initialize once at the beginning, but because it is not cycling between different channels does not need to initialize.

  The two changes work fine on their own (each was built off the coast of the Advanced Scan example with some indicators for readings added identically both) but putting them together is a challenge. I know it was stupid to do separately; It started as a mistake, with that I ran. I thought I could just make a change in the VI on the other, but this is not the case.

  I have attached two independent changes would appreciate some advice.

  Thank you

  Yusif

  Kira,

  In the original VI that I posted, the string inside the loop indicator which contained all the subVIs provided in the example (not counting the first track set up) would not display the list of the channels updated. In fact, I solved the problem yesterday and would be happy to share with anyone who is interested:

  The problem is that I was initially put in the conditional of the change of a single channel, based on the number of iterations of the while loop. If there was only one channel, that the structure of the case returned to the son through all right, it was possible to circumvent the two subVIs in the case of 0 and therefore no change. The key was to spend the conditional of the structure of matter to be a true/false, that contains the same objects as the original. The real deal would be dependent on the input being 3 characters long, not empty string and the same as it was in the previous iteration thus implemented the exact state where one lane has not changed. The VI works exactly as I wanted at least some messy shows I will be clean today.

  If my solution is not clear or someone would see the VI me message please.

  Thank you for the help,

  Yusif

• update of the components of the cluster transit

  Today, I wrote a recursive VI (my first!) which updates the items between groups where clusters named elements in common.

  Background: I have a test architecture I am developing where each step-test configuration, a cluster is stored in a file. If the cluster configuration changes for a test, I would like to be able to load the old values of configuration for the new test. Usually this group will be the same, but it can have new items or items that have been deleted.

  The VI is based on certain functions varying OpenG. The challenge here was to deal with nested groups, and it has been managed by recursion. The VI has shared value clone reentrancy and data of cluster in the main cluster types are managed in a call environment in VI. It's an elegant solution!

  I'd like some comments on this code: are there ways it could be improved? The corner cases, I have not covered?

  I've updated my code, which is now robust to missing cluster - group.