Change a record to make 2 versions (longer and shorter for a special topic)

Similar Questions

• What I must be connected to the internet when you use illustrator by creative cloud? And can I change the language on the trial version if I lay for the paid version? Thank you in advance.

  What I must be connected to the internet when you use illustrator by creative cloud? And can I change the language on the trial version if I lay for the paid version? Thank you in advance.

  Francine simply connect to the internet periodically to receive updates and validate your membership.  If you have an annual membership, you can be disconnected until 99 days.  You can find more details in the help of Activation & deactivation.

  I also recommend to review CC help | Install, update, or uninstall applications which deals with the installation of setting language.

• Hi, how do I change the orientation of the page with headers and footers for facing pages

  Hello

  How to change the orientation of the page with headers and footers for facing pages in CS5

  Turning the page is only for the formatting of data - the page is not literally transformed for printing.

  In most print even if the pages of a book are enabled for the landscape, the header and the footer are still in the same position.

  If you need pages in landscape mode with headers and footers in a different location - you need to do these pages in the section "Master Pages" of the Pages panel

  Then apply these new Master Pages to the pages in your document.

  http://helpx.Adobe.com/InDesign/using/master-pages.html

  Note - it is not usual to have a different orientation for the headers and footers.

• Default AirPrint of reversal of the rather long and short side (printer Photosmart 5520)

  Hello

  When I used to print from my iPad via AirPrint on both sides on my printer HP Photosmart 5520, it used to print, so that you may browse on the long side. For some reason, it changed to printing, so it switches to the short side.

  How can I change by flipping on the long side?

  My son has discovered a fix for this problem. We have now tried on three iPads and whenever he has set.
  The solution is to disable double-sided printing in the options when you are about to print a document and then turn it back on.
  After that the only time anything printed duplex will be sharp long printed not short edge.
  It is not a rocker, I can't get my iPad to print double-sided on the short side now (not that I want to), for some reason once you turned two-sided printing off and on again, long-back becomes the permanent default.
  Weird!
  
  P.S. He arranges for all applications.

• How to change the record to a local drive on network drive for all users (Small Business Server)?

  I need to implement a change on the backup to a local drive to save to the network drive/folder to 15 users in a Small Business Server, can someone help?

  Thank you

  Hi Frydom,

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forums.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• How to make a version of Adobe Reader for an IPod touch with IOS 6.1.6

  There is no option to upgrade IOS version 7 or beyond.  Current AppStore wants IOS 7 or better to download on my IPod.

  Thanks for your help.

  jojohume,

  Did you never properly installed an older version (not the latest version) of the Adobe Reader software for iOS on iPod Touch using your ID before Apple?  If you have never installed Adobe Reader using the particular Apple ID, he can explain why you get the dialog box with the OK button (i.e. no download button).

  Here's what you can do to experience.  (I don't know if it would work.  "But it's worth a try).

  1. On your iPod Touch, check the Apple ID you use for the App Store (settings > iTunes & App Store).
  2. On your computer, Windows or Mac, open iTunes.
  3. Connect to iTunes using the same Apple ID you use for your iPod Touch.
  4. Find Adobe Reader and download it to your computer.  Do not try to install it on your iPod Touch because the latest version is not compatible with your iPod Touch in any case.  Now, Adobe Reader is associated with your Apple ID.  It is important step to be able to download a compatible version on your iPod Touch more later.
  5. Return to your iPod Touch and repeat the steps described in my answer #1.

  Looks like you already tried iTunes on your computer.  Please go back to your iPod Touch and try to install Adobe Reader using the same Apple ID again.

  I hope this works.

  Here's the documentation from Apple that I found.

  Install the latest compatible version of an application on an earlier version of iOS or OS X - Apple support

  If a compatible version is not available, you can try to contact the developer of the app. You are looking for contact information on the product page of the app in the App Store or the Mac App Store.

  The documentation itself is not very useful.  But I can confirm that we offer Adobe Reader for iOS version 11.0.1, which is compatible with the iOS 5 in the App Store.

  You can also ask your question to Apple Support communities.

  Welcome | Apple support communities

• Good afternoon. I would like assistance with regard to the transfer of files via FTP (Firezilla).  I created a site using the Adobe Muse CC version 2014 and then for all the export to HTML files and make the transfer, it is in error in the JavaScript file

  JavaScript

  You must work with your hosting provider. It seems that your host server does not include a sender or is not configured to enable PHP send mail.

  

• Pavilion dv6: gel questions - Long and short DST errors

  Hello.

  Im having freezing randomly and stopping the laptop to answer. "" Do you have the test equipment fast twicw and expand and these errors appeared, 'short DST failed: 0GC49F-64983J-QFPK1G - 60 X 603'and'LONG DST FAILED: 0GC49F-64983J-QFPK1G-61FW03 '. Also the webcam stoped to work, but I don't think it's related. Do these errors mean?

  Failure of the [disk Self Test] DST indicates that your hard drive will probably fail in the near future.

  You should backup all important files, to create a system recovery media and replace the hard drive with the same size or larger than the original.

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• Export a document to pg 6 and change a block of text on page 1 and 6th for each 50 times

  I have these 6 brochures page and there are 50 marketing codes that should be on the first and 6 pages (different codes for each exported document). Instead of manually changing the marketing codes on the 2 pages 50 times (which takes too much time), there must be an easy way to do it. No matter who came across this?

  On the data merge, instead of selecting "Create a merged Document", choose the option "export to PDF".

  It will merge all the results into a single combined PDF.

  To merge the files into a single page PDF is something that the software can not do this by default, but I wrote a piece about this elsewhere: http://colecandoo.wordpress.com/2013/07/13/breaking-up-is-hard-to-do-indesign-files-into-i individual PDF-that-is /

• computer not start, receive a beep long and three short beeps

  Just installed the update video drivers ATI disk mag APC program and when I tried to start computer I'll beep long and three short beeps but nothing else happened.  The answers to the problem

  These beeps are error codes of the BIOS POST (Power on self test). A series of long and short three is usually a related video.

  This is usually caused by a problem with the video card or the memory on the video card. It can also be a motherboard problem. I don't know how this is related to the update of video drivers, unless something was going wrong catastrophic.
  If it is a PC with an independent video card, you can try physically re - a corner of the card or install a new card, so you can have access to the computer for a further diagnosis. There are not many other things that can be performed before the replacement of hardware components (motherboard, video card, etc.).

• How to operate the laboratory discovered multi-function synchronization with multiple devices and change the recording time?

  Hi, I'm new in Labview. I need help for:

  1 change a program multi-function in order to record the data of three cards daq (devices 1-3) and output through the map (1 unit). The current program was created to record and output signal of one of the card (1 unit). I try to choose multiple devices when I run the program, but there is an error 200558 shows "a task cannot contain multiple independent devices. Create a task for each independent device.

  2. change the duration record for a longer period, for example: 0.1 s. Currently, the recording time is s 0.009971.

  I joined the multi - funtion.lld. In this library, "des_v2_Multi-Funtion_Synch I - AO.vi" is the program that I need to change. I've also attached a file of input for runing the program signal.

  Thank you very much!

  Sincerely,

  Jie

  Hello Jshen6,

  You can have different examples of VI if you do not use the same version of LabVIEW. I am currently operating on LabVIEW 2013 SP1. Whatever it is, this article should be useful to you that he describes in detail how to synchronize multiple tasks of series M.

• The item 'xuiexi.scr' that this shortcut refers to has been changed or moved, so this shortcut no longer works correctly

  Original title: problem with the shortcut "xuiexi.scr".

  When I try to open my files I get a notice that says: PROBLEM WITH SHORTCUT.  The item 'xuiexi.scr' that this shortcut refers to has been changed or moved, so this shortcut no longer works correctly.  You really want to remove this shortcut?  YES / NO

  What can I do to recover these files.
  Thanks in advance for any help.
  NW

  Hello

  (1) remember you to make changes to the computer before the show?

  (2) is that limit this issue when opening specific programs?

  You can perform the following methods.

  Method 1: I suggest you to run the Microsoft Fixit article.

  Fix broken desktop shortcuts and common system maintenance tasks: http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

   
  Method 2: Run Virus Scan

  You can download Microsoft Safety scanner, which provides on-demand scan, and remove viruses, spyware and other malicious software. It works with your current antivirus software.

  See the link below to download Microsoft Safety scanner on the system.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note:
  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  WARNING:
  The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.
   
  It will be useful.

• Changed the record office to another drive, but now nothing appears on my real desk

  Hey everybody,

  So, I recently had a hd crash and decided to try a hybrid ssd/hdd. I have my boot of my ssd, which I guess by default placed the desktop folder in the same drive. After some research, I found how to change the path to the C: Office, which was the ssd, K:, that was the hard drive. Now every time I save anything on the desktop, it saves on the K: drive but nothing comes up on my real desk.

  I guess it is because the path Office is on the C: drive, but can I change it so that it displays all of my K: drive?

  I am running windows 7 Professional and use the double disc WD Black2.

  Thanks in advance!

  Moving files in Windows 7 and Windows 10 user

  1 this is the standard way to work [I've included in the procedure to move all user folders rather than just the desktop folder you mentioned and I spoke also defining the IE file downloads].

  1.1 create a folder K:\Documents & moving * your data inside files [move content from C:\Users\yourusername\Documents not the folder \Documents C:\Users\yourusernamehimself].

  [* Windows will offer to move the files on you when you change the location definition in subsection 1.2 tab, but it can get really annoying if it fails, then it is safer to move yourself in advance.]

  1.2 set the location in \Documents C:\Users\yourusernametab to point to K:\Documents.  You do this, as you must already know, by doing a right click on the file C:\Users\yourusername\Documents and selecting Properties and then click on the location tab.

  1.3 set permissions to K:\Documents by clicking right on & selecting share with specific people or one right click on it & select Properties then the sharing tab.  [You can allow yourusername & accounts Admin reading & writing, but other users ['allowed users'] to have, for example, list only permissions].

  1.4 repeat 1.1 - 1.3 for these other user folders [I showed records that I moved them just for example]

  Music K:\Documents\Music,

  Photos K:\Documents\Pictures,

  Videos K:\Documents\Videos,

  [IE] Favorites K:\SystemSettings**\Favorites

  Links K:\SystemSettings**\Links***,

  Search K:\SystemSettings**\Searches.

  [* SystemSettings - it just suited my backup plan to separate these parameters in one group different file.]

  [* Links - This is the entrance to 'Favorites' that appears at the top of the Windows Explorer Navigation pane - he has very wisely been renamed in Windows 10 quick access since that's what it is dedicated]

  A folder of additional user exists in Windows 10 - the screenshots folder and my advice on the use of this facility and moving his file is in setting and checking of the screenshots folder

  - - - - - - - - - - - - - - - - - - - - -

  2 verification of the task and correction of errors by using the registry; check the IE, downloads folder

  2.1 it is probably possible to change the parameters of location in the registry manually rather than use the location tab, but I only looked at him subsequently to check happened correctly and to correct an error I had made.

  2.2 as it is to change the registry the usual warning apply [back to the top of all, make an image of the system, test the system repair disc / Windows installation disc so that you know that you can start with something to be able to restore the image if Windows will not cooperate].

  2.3 open RegEdit [C:\Windows\regedit.exe] - I always open it by right-clicking and selecting run as administrator, but I don't think that it is essential for the special keys used in this task.

  2.4 I checked how to implement by accessing user ID

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  and clicking each entry in the list to see what number S-1-5-21-NNNNNNNNNNNN-100X is the name of the affected user.  The user name appears in the right-hand side of the RegEdit window you look at each entry.  The number of S-1-5-21-etc., it will be the X at the end between your user accounts.

  2.5, go to this entry [using the S-1-5-21-etc number you just found]

  HKEY_USERS\S-1-5-21-NNNNNNNNNNNN-100X\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

  2.6 checks if the value of the personal in the right side by double-clicking on the personal and changing that value to that of the new way you have implemented already.  [Staff means entry of user my documents ].

  2.7 checking the values of the other user folders that you moved.

  2.8.1 [Windows 7] while you're there, check IE, location of the downloads folder.  It is in the key

  {374DE290-123F-4565-9164-39C4925E467B} which is normally the second entry down just after {Default}.  This sets the folder you would normally define in IE, Tools, view downloads, Options.  I saw that the normal procedure fool you once, and there is no adverse consequence to set the correct value in the registry instead.

  2.8.2 [Windows 10] you must manually set this folder once for a corresponding registry entry must be created.  Thus, as a first step, set the folder in IE, Tools, view downloads, Options.  Subsequently, you will be able to check & to change the setting to Explorer\Main HKEY_USERS\S-1-5-21-2568008921-1580239441-348697478-1001\SOFTWARE\Microsoft\Internet with its default download directoryentry.

  2.9 you will also see a few lines up key

  HKEY_USERS\S-1-5-21-NNNNNNNNNNNN-100X\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell records

  and the corresponding entries in there match those in which you have worked in.  I mention the existence of the second series of entries just because you could see the and might get scared that something has gone wrong.  When I made this correction, I just couldn't get the second set until later so I have whatever it is worry.  You will notice that some entries exist in two of these areas, while others exist only in one of them.

  - - - - - - - - - - - - - - - - - - - - -

  3 while I saw some threads in this forum who allege that registry changes can achieve more than using the box location tab [i.e. more than my procedures in article 1 & 2 cover], I see no convincing evidence that it worked [and I saw at least a thread who said that subsequent attempts to run a repair installation wouldn't work - the system has just said that he could not. work with unexpected folder locations that he discovered].  I think that these discussions said that they had moved all of the user profile on the data disk, but I have no notes thereon as they seemed to me to be questionable procedures.

  - - - - - - - - - - - - - - - - - - - - -

  4 benefits of the relocation of the user folder

  The separation of your data files of your operating system & its applications is not just free up some space on the OS disk [normally C:\], it also allows to make images of system regular training of the BONE that are almost certainly going to be 40 GB or smaller [and only take 25 minutes to do].

  It would take you back to excellent capabilities as response to the corruption of the serious system could then be to boot from a system repair disc or a Windows 7 USB/DVD installation and restoration of this image, i.e. restore the system drive, exactly what was on it at the time that the image was made.  This restoration only takes about 25 minutes.

  I did a couple of years and would never set up my system any other way now.  I had previously considered images of the system as a tool of INFORMATION services used to avoid the difficulty of flaws correctly, but I was wrong.  Now, I make them regular system on external drives and can therefore get reliable disaster & quickly.  You can hunt with confidence the flaws or just to do experiments in knowing that you will be able to go back to square one, even if everything goes wrong.

  With separate system & datafile discs, you can continue to do backups of simple file of your own files on your disk data using Windows backup or another backup of file utility.

• How can I download CS3 version 'later' and make it work on a newer computer? (I have the activation code that I bought in 2008)

  How can I download CS3 version 'later' and make it work on a newer computer? (I have the activation code that I bought in 2008)

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• I have a Canon 7 d Mark II and I'm using Lightroom version 5.7.1 on a Mac computer. My question is, I can't get attached to my computer. Lightroom and my computer recognizes my camera, but the connection did not last long and she also gets lost and then c

  I have a Canon 7 d Mark II and I'm using Lightroom version 5.7.1 on a Mac computer. My question is, I can't get attached to my computer. Lightroom and my computer recognizes my camera, but the connection did not last long and she also gets lost connected, then lost several times until the capture of attachment option is closed. I tired buy new cables, lightrooom and call Update to Canon support, but still nothing works for me please help?

  Hi Martin,

  In order to make shooting with the Canon 7 D Mark II captive, you need Lightroom 6 and higher.

  Please visit the following link: a list of cameras that can be attached to Lightroom.

  Kind regards

  Tanuj