Change default and the vMA gateway subnet mask

Similar Questions

• I get the IP address, subnet mask, gateway, but I am not able to go online.

  I use Windows vista home 32-bit version. I'm trying to connect my laptop to the home modem. I get IP address, subnet mask and default gateway, but still I am not able to go online. I had checked most of the thing as reset modem, reset my network card. When I run his shows an error command ipconfig/release ' year error occurred while releasing interface pseudo-interface 1.» The system cannot find the specified file. "I had also run a command to reset my TCP/IP settings. While other computers and a laptop computer connected to the modem even could go online, as well as while I connect my portable roommate same cable of his work. To solve this problem I had also to restore my laptop. When I see the advance of LAN connection option, it shows that "this device works correctly. In the center of the network share, it shows not identified (public network), access Local only. 

  Hello

  What is the IP address that you have read?

  If it is 169.xxx.xx.xx then it is not an address valid IP connetion.

  Check the network configuration of your computer.

  Maybe this can help.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  If every thing look good and he doesn't still doesn't work do not try to reset the Winsock and TCP/IP stack.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP, just replace the command typed with.

  netsh int ip reset press Enter

  Restart the computer.
  

  Jack MVP-networking. EZLAN.NET

• get the IP address, subnet mask?

  HI people,

  Could someone tell me how to determine if a users IP is with a certain range of IP?

  I need determine if a user has a 111.222.333.444 ip address and a subnet mask of 444.555.666.777.

  I can find ho to get the ip address of the cgi variables, but don't know how works the subnet mask.

  Can someone please explain?

  Thanks in advance

  Hi Matthisco,

  Your colleague IT is right. It is a legitimate question. He has indeed a formula to find the IP address range that corresponds to a given subnet.

  However, your question is more appropriate for a forum on the networks for a Coldfusion forum, because the calculations are very involved. First of all, you need to know if the network is class A (IPs of the form 10.x.x.x), class B (form 172.x.x.x IPs) or class C (192.x.x.x). Other parameters you must factor in the equation is the number of subnets and the number of bits of the subnet and the number of bits of the mask.

  To learn more, Search the Web for the subnet mask. In fact, there are online subnet calculators that generate ranges of IP addresses. You can then use this range in your code.

• Picture of the events of clusters - change value and the mouse down

  Hello everyone

  I am facing a problem of triggering events using two arrays of clusters.

  I have two paintings of clusters: A and B. There is a Boolean control within each group and to maintain the two paintings in clusters at the same index value (indexVals), the vertical scroll bar of A is hidden but the vertical scroll bar of B is visible. I was using a case with 3 cases triggered by structure: the mouse down, timeout and the mouse upwards. The case of "mouse down" feeds of terminal 1, which makes the case "timeout" the waiting period. The case of "timeout" continues to fuel terminal 1 timeout and has two property nodes (one for A and for B) makes the value of B indexVals is written on the indexVals of a. inside the case of "mouse up" it has a value of-1 for the terminal timeout, putting an end to the process. OK, it was working great. But...

  Now I need to keep the same procedures described above, but I need to raise an event when the user clicks any boolean (led) change state. I thought about the event "change value", but when I click on the led to trigger the event of "change value", the "mouse down" event is also triggered.

  Any suggestions?

  The real VI is a little different from what I described, but the problem is exactly the same.

  Thank you

  Dan07

  Like this:

  

• Change frame and the background color of the comment

  1.

  How can I change the color of the frames?

  2.

  When I do a comment, the comment fit. How can I change the color of the box and the background of the box?

  TQ

  Show your tool palette, and then select the brush of pint.

  Active space bar / disables the foreground/background

  Ben

• VMware Tools and the vMA

  Hello

  I noticed that VMware tools shows as obsolete for vMA 4.0. I ran the command ' sudo vima-implementation to date update "to update the vMA.

  The reason is that I need to install a script for our UPS on the vMA to stop customers automatic and host when AC power is lost and before that sinks in the battery, this script needs VMware tools running and I guess he wants to the most recent version.

  Anyone know if VMware tools is supposed to be a part of the updates? and if not can just download the rpm and execute it?

  Thank you

  John

  Vima-update is update patches on vMA and has nothing to do with VMware Tools. As long as VMware Tools is running, you will be able to make a stop of comments, it does not require the most recent version. The reason for which the tools of vMA is outdated is probably due to when it was released, the Tools version was the latest version and compatibility purposes, they kept to that. If you want tools to update, just right click on the VM and install VMware Tools.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• CGI and the event gateway

  Hi all

  I have create an eventgateway and call the gateway instance using the function "SendGatewayMessage.  The gateway instance works correctly.

  But I write the CGI in pdf format

  The CGI. Server_name is NONE, REMOTE_ADDR is the empty string

  How can I get the servername and REMOTE_ADDR

  Help, please

  You will need to pass this information in the event handler function.

  The CGI variables are built by the web server and the application server.

  Invoking an event gateway with SendGatewayMessage does not pass through the web server so no CGI variables.

• By default and the homepage does not

  Hi people,
  
  in one of my projects (easy CHM, no merging), the home page button no longer works.
  
  I put the default fields and home in the windows > properties > Properties dialog box Advanced Topics/ov110_intro.htm, the usual formula which gives the relative path and file name.
  
  After compilation by clicking the Home Page button results in a page not found error.
  
  The HHP file shows the correct entries in the definition of windows.
  
  I've experimented with forms of diofferent for fields, but nothing helped. Has anyone of you took note of this behavior and maybe even found a solution?
  
  Greetings
  
  -Dirk Bock

  The fix: compiler insisted on the definition of the wrong window.

  I finally got the problem. Because of my cluttered desk I did not notice that when navigationg using the table of contents, help viewer opens a new window. This window belongs to another production by an another home page. And this home page is removed from this production using conditional build tags.

  Somehow HR has changed the name of the window to use when navigating through the table of contents.

  -Dirk Bock

• change password and the name of windows

  I bought this laptop used, I want out former users of information, his name is on all my files etc. I tried to change the windows password, but his name came and I do not have his password. There is no way to get this information from him.

  I have a Toshiba Satellite L305. It runs Windows Vista Edition home premium.

  I was about to launch the recovery disks, but I thought I'd check here first of all for a better way.

  Logon as an administrator. Click on start - all programs - accessories - right
  Click on command prompt and choose Run as administrator. Type
   
  Control userpasswords2
   
  Select the account, and then click Reset password.
  --
  ..
  --
  "loganemd911" wrote in message news: 5e703fbf-39be-4 d 05-903 b - 502c539b4a04...
  > I bought this laptop used, I want to get the old users information to, his
  > name is on all my files etc. I tried to change the windows password, but
  > his name came and I do not have his password. There is no way to get it
  > information on his part.
  >
  > I have a Toshiba Satellite L305. It runs Windows Vista Edition home premium.
  >
  > I would run recovery disks, but I thought I'd check here
  > first of all for a better way.
  >
   
   

• By default and the default installation path

  Should I use best practices in default installation of MS Office and other programs path because my company uses the directory default for MS Office installation and other programs? The default path points or C:\Program Files (x 86) C:\Program but my company created a new folder directory outside the Program Files directories for several executable programs. Let me know that my company should follow best practices to avoid the mess of the operating system?

  Typically, you leave the default installation path is.

  Show you the paths are for 64 bit & 32 bit programs, more often that it is senseless to do otherwise.

  And if you talk to a separate partition/drive programs usually function properly, or not at all, if installed on other than the partition Win

• House hit by the lightning/now, no sound from speakers/Changed speakers and the cables of the loudspeakers, power son / could it be the sound card?

  Home struck by lightning, and now there is no sound on comouter (HP-vista windows desktop). I replaced the speakers and all the sons of the power cords on the same / I was told that this is perhaps the sound card. How I can tell and what kind of sound card I can? (One of Best Buy or some stores like that?) I just need to play sounds like originally nothing complicated.    Thank you

  Home struck by lightning, and now there is no sound on comouter (HP-vista windows desktop). I replaced the speakers and all the sons of the power cords on the same / I was told that this is perhaps the sound card. How I can tell and what kind of sound card I can? (One of Best Buy or some stores like that?) I just need to play sounds like originally nothing complicated.    Thank you

  ==========================================
  Go into the Device Manager and find out the sound card... if he has
  been burned there will be probably be yellow exclamation points.

  Windows Vista - open Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  Solving audio problems in Windows Vista
  http://www.ehow.com/how-does_4966770_troubleshooting-sound-problems-Windows-Vista.html

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Loss of change data and the markup for the photos moved originals on external hard drive. How can I get that back?

  I transferred the originals to an external hard drive to free up space on my hard drive.  After doing this, all that I had done some missing photos, as well as all the indicators I used.

  Is it possible to get this back?

  Hi Samuel,

  You have an exclamation point on the images in Lightroom?

  If so please click on the following link: the help of Adobe Photoshop Lightroom | Locate missing photos

  Have you moved the images in Lightroom or out of Lightroom?

  Are you sure you're in the right catalog?

  Concerning

  Sarika

• How to change the application apps and the sysadmin password

  Hi expert,

  I know not how to change the password application and sysadmin in the oracle application. but I have a doubt.

  What is required at the bottom of the application when you go to change applications and the sysadmin password in the oracle application.

  Please suggest me what is the proper way to change the apps and the sysadmin password.

  to change the password for apps I followed the command below.

  FNDCPASS apps/apps 0 System/Manager SYSTEM APPLSYS < new password for applications >

  for sysadmin

  FNDCPASS apps/apps 0 USER sysadmin < new passwd for sysadmin > System/Manager

  Please clear my doubt.

  Thanks and greetings

  pritesh Rodriguez

  
  

  
  

  I know not how to change the password application and sysadmin in the oracle application. but I have a doubt.

  What is required at the bottom of the application when you go to change applications and the sysadmin password in the oracle application.

  You must stop the services before you can change the password of user apps, and then run the automatic configuration after changing the password and eventually train services to the top.

  Stop down services or the AutoConfig running is not required for SYSADMIN (and other users of the application).

  Please suggest me what is the proper way to change the apps and the sysadmin password.

  to change the password for apps I followed the command below.

  FNDCPASS apps/apps 0 SYSTEM APPLSYS System/Manager

  for sysadmin

  FNDCPASS apps/apps 0 system/sysadmin USER Manager

  Please clear my doubt.

  What change Applications using the apps schema password change Utility (FNDCPASS or AFPASSWD) (Doc ID 437260.1)

  Loss of password SYSADMIN. How to know the password of the user SYSADMIN (Doc ID 1066661.1)

  Thank you

  Hussein

  
  

• The vMA traffic packet capture

  I'm deploying a new VM vMA. I have the virtual machine on a different subnet than my regular production network. Everything is good so far except when I try to run the command 'vma-update' When I do that, I get a message "no route to host". I followed it down to the access list that I have on my switch. Do I have to do now is execute a capture of packets to see what IPS the vMA is in talks with so I can enable them through on my access list.

  What is the best way to run a capture of the vMA packages?

  Thank you.

  Well the URL can be solved in several addresses/etc, but I guess already know you that.

  Eaiest is to perform a tcpdump, it is not installed by default on the vMA, so you can get a YUM repo and configure another session in which you make a tcpdump while you're trying to run vma-update

• import of page loses references of region model and the page template

  I have a dev and test environment. The test workspace is an export of the workspace of dev. Both applications have the same id app.
  
  I export a dev page and import to test. This works.
  
  I run the test page and the page does not. When I had the look of admin test page model has been implemented by default and the 'report' two models of User Interface have been updated the model No. and the submission of the report was by default (standard) HTML, that is not what was in the app dev.
  
  I looked at the page in dev and the page model was a standard tabs, UI were region of report and the presentation of the report was 101. Standard, row of alternating colors.
  
  Does anyone have an experience with imports no implementation of pages they were exported?
  
  TIA,
  
  Sam

  Sam,

  The object associated with an application are created specifically for each application.

  Whenever you create a component that a unique ID is assigned for use as the primary key, although some components have composite primary keys - a page, for example, is identified solely by the application ID and the ID of the page.

  Then, unique IDS are not transferable through an import / export.

  Install an application and keep the ID of the original application won't change any internal ID in the installed application.

  If the ID name and app object were used to the "key" which would allow applications to be a little more portable/leachable (is that a Word).

  I don't see how it works, or how it would do something more flexible that it isn't already.

  The import of components and of the page, but when he tries to use the same ID internal to the models and other application classes opposed the ID internal are not the same as the IDS exported and therefore fail.

  Right. The ID of the shared components, such as templates, referenced by the page that you have installed are the IDS used in the application that you have exported the page of. Normally, you should install the page in an exact copy of this application, one with the same ID for components shared as the source application. But you've actually created two new applications in two different workspace by changing their application during the installation ID, which makes them 100% dissimilar for such purposes. (Regardless that they now have the same application ID, they cannot be correlated).

  Where can I find a list of the components that are unique to the current mix of work/App space IDS and those who are not independent.

  All components except the pages and applications, I think, get their identity papers adjusted when you change the application during the installation of the application ID.

  Now, what you could have done when you request 202 and want to make 150 has been to change the export file and changed several references to 202 to 150, remove app 202, and then use SQL * more to install the application using this file. There would have not been in the ID being adjusted.

  Scott