Change DHCP with control through web query

Similar Questions

• How to dynamically change the generated query through the "query by example".

  Hi all. I'm relatively new to the ADF, so I've been beating my head against a wall trying to figure out how to do this... Any help would be greatly appreciated!
  
  What I try to do is to make a custom search (query) against a set of tables in the database. Normally, I would use just the ability to "filter" the af: table to do this (query by example). However, the query I need to run has three specific requirements:
  
  1. I need to change the 'WHERE' clause differently according to the field in which the user enters criteria in. For example:
  -If the user enters something in the field 'name' of filter, the default ADF BC will do is add '%' to the value entered, turning it into a query "begins by". I also want to prepend a '%' to the input value, (for example "doe %'), it becomes a query 'contains '. I don't want the user to see the '%', I put at the beginning of the field in the UI, however.
  -If the user enters a value of 9 digits in the field 'SSN', do a query of "accurate". If they penetrate only 4 digits, do a query "ends by". (I could always just a query "ends by" - for example "% of values" - even if they have put in 9 digits, and that would work.) However, an exact match will run faster because of the index on the field, so I want to use that if we put 9-digit.)
  
  2. I also need to change the SELECT part of the query based on which fields are used in the filter.
  
  3. If the user enters the filter values in several fields, I need 'OR' them together. The default functionality, it's that they are 'linked' together.
  
  Can someone point me in the right direction? My thought was somehow replace the manner in which the query is generated when the user presses ENTER to run the filter. But, I can't seem to understand where and how to connect it to this process to customize the SELECTION and WHERE the parts of the generated query. I'm sure that there is a way, and I hope more experienced ADF'ers can direct me to the solution.
  
  Thank you!
  
  Published by: 926392 on June 25, 2012 15:39
  
  Published by: 926392 on June 25, 2012 15:40

  Check this post in the ADF Code corner for the necessary information:
  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/30-table-filter-queries-169172.PDF

  Thank you
  Nini

• Windows 10 continues to change user account controls

  Why windows done 10. change user account controls, it's extremely annoying. Whenever I reboot it disables it, which blocks all applications. Why he won't stay where I leave it?

  While I can only say that malware has installed a utility that removes the UAC setting when Windows loading [in the hope that you don't notice the change, and that malicious software can therefore go further by installing other malware without bringing a challenge Admin dialog box].  This problem was reported some time ago and finally diagnosed as a symptom of malware - see Windows 7 UAC (user access control) is disabled on every reboot

  In addition to a full scan with your antivirus installed utility, download and run a scan with Malwarebytes Anti-Malware free [MBAM].  It is much more difficult for malware to hide its presence of two scanners different antimalware.  MBAM can exist alongside other anti-malware utilities, so it won't be a problem.

  Of course, it could be an anomaly in the system instead, but it's not that I've seen reported in this forum before.  Windows has no integrated procedure that changes the setting of the UAC, so it is difficult to envisage any procedure through to cause this symptom.

  Please specify the operating system you are using and use blue change control under your question of re - categorize it as a matter of Windows if necessary 10.

  Good luck

  Denis

• Trinidad Apache runs with control of activated timestamp.

  Experts,
  
  My web.xml file content

   <context-param>
      <description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
      <param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
      <param-value>false</param-value>
    </context-param>

  When my application is running I get the following on the weblogic console
  
  < ViewHandlerImpl > < _checkTimestamp > Apache Trinidad runs with control of activated timestamp. This should not be used in a production environment. See the org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION property in WEB-INF/web.xml
  < UIXEditableValue > < _isBeanValidationAvailable > Validation Bean A provider is not present, so bean validation is disabled
  
  is it not a bit strange? Please tell us what the problem is.
  
  thnks
  11.1.2.1 jdev

  If you speak the WLS integrated, timestamp control is automatically turned on anything so that changes you make in the IDE can be picked up. There is nothing to worry.

  John

• Possible to change the variable cpQuizInfoPassFail through advanced actions?

  Is it possible to change the variable cpQuizInfoPassFail through advanced actions? I do not see this or the other quizzing variable when I try to create an advanced action and change by entitlement or expression. Let me explain what I want to accomplish, I ask the wrong question. I have a training project, with that I need to include a post test. I don't really like the captivate quizzes. I want the post-test to play as a ride on jeopady where the user chooses issues category and gets points if the user answers correctly. For this I must ask questions on a game board and (from what I can fig) you cannot have multiple questions on the same page. I'm building the quiz with my own custom variables and coded so that the program jumps to a page of the certificate if the user gets more than 84 points. THA all works very well. But I have to be able to tell the database that the program will connect with the user has passed the quiz. I thought I could do this if I assign the value 1 to the variable cpQuizInfoPassFail. Is there a way to do this? Thanks in advance for any help,

  Doug Jackson

  Hi Doug,.

  I don't see the version you are using. Each interactive object can be marked, has a report following properties in the control panel (if you use CP5 or CP5.5) or a tab in the Properties dialog box reports, if you use a different version. You must add a score (default value is normally 1 point) and make sure you add it to the total score.

  If you want to make me a glance, post your file on acrobat.com (free, use your Adobe ID), share and publish. You will have a link that you can copy into a private message to me.

  Lilybiri

• Assign the new manager through Web portal

  Hello experts,

  I am trying to assign a new manager through Web portal for all users (by going to the people-> assign to the new Manager-> set new manager and date in v7) and the system does not change the Manager. He's not even plan a change, at least nothing shows in respect of deferred operations. In looking at documentation it says it is STANDARD and there is no global configuration setting for this. Everyone knows about this problem before?

  Thank you

  Sergei Shvets

  The new assignment in the web portal Manager starts a request workflow.

  Please see the documentation for web portal for more information.

  https://documents.software.Dell.com/Identity-Manager/7.0.1/Web-portal-user-guide/working-with-the-Web-portal/managing-employees/assigning-a-new-Manager-to-employees

• You cannot change the location of the Web site folder

  Greetings,

  When I change the location of the Web sites folder in the server application by changing ' Store Site Files In: ", the files in the default location of continue to load and not those of the location, I've specified. The location, I put is saved in the server application. I can leave the Server app and start again and see the location I specified, but it does not use this place.

  Thank you

  Read https://help.apple.com/serverapp/mac/5.1/#/apd1AB74EDF-C5B3-4C20-AD02-42120FF3B2 08 and try to stick to these principles as much as possible.

  The steps under does not include the method to change the location of the root folder, as Apple has as focus not exactly that.

  Add or change Web pages on your Web site

  To change what is available on the Web site, change the files in the folder to root for the document to your Web site. Folder document root is the folder that contains your website files.

  Use the server application to find the root of your Web site. Default document root is/Library/Server/Web/Data/Sites/Default /. In addition, when you create a site and let the application Server automatically creates a new folder for you, he places the site filesin/library/server/Web/Sites/data/domain_name/.

  1. Selection of sites in the sidebar the Server app.
  2. Select the Web site, and then click the button change .
  3. Click the arrow to the left of the menu pops - up Store Site files in. The Finder opens at the location the document root. Edit files in this folder to change what is available on the Web site.

  They wanted to provide a foolproof server where effective MDM can be performed. Therefore, they went very far to ensure that it should not be messed with. The integrity of services that ensures the effective management of Apple devices are paramount.

  Therefore, I think that you try unfairly to move the part of the services and server would not allow you to do so, as the Profile Manager and Wiki should still work after you have set up to host your Web sites (which Apple documentation referred to as virtual hosts).

  Thus, you need to configure the "Virtual Hosts" with their root of the document.

  HTH

  Leo

  Edit: If you had read: /Library/Server/Web/Config/apache2/ReadMe.txt

  and scroll down to sites you'd understand more.

• How to: using the same control panel for several vi and reproducing change to the control panel.

  I created a labview project that contains about 40 vi.  Each vi has a joint control panel which is a group of ip address, or address of the port and the parameters that are passed high-level vi at low level vi for the purpose of control and access our daq cards.  As this control panel exists in all the vi and must not be the same there is a problem when the need to make a change or update the controls during development.  The problem is how long it takes to go and change the control panel of each single vi.  I wish I had a way of reproducing a change in the Panel of control through all six simultaneously.

  All controls in the control panel are in a bundle, so all values are passed to 1 thread.

  I tried to turn the Panel in a sub vi and this way I can just "create control" and have output parameters maniuplate vi, but if I update the vi, I still have to go back and create a new control for each vi under the control has changed.

  I tried using secondary and the creation of the control panel in a sub vi which is displayed in the secondary, but gives the undesirable consequence of not being able to view or change the settings of the control panel if the program does not work, as pristine as when sub-panels program does not work.

  Is there a another way to display the front panel of a Subvi next using a panel of void?  Is there a better way to propagate changes in a bundle in a series of vi?

  Yes a def type might help you and I would take the next step to make a strict type def if you want the look to be the same on all its bodies. You can also view this nugget on Type definitions for more idea about it.

  Have fun

  Ben

• Parental Controls error: "unable to make changes to parental controls settings.

  I recently added a second user on my computer so that my friends and family can use it even if I'm not around. Only one problem though. I tried to put parental controls for literally giving them access to about five programs and nothing else. I know HOW to put in place, but whenever I finished the settings, an error comes up saying

  "Impossible to make changes to parental controls settings. If the problem persists, see your system administrator. »

  Of course, since it's my computer, I am the system administrator. It says my user profile. Everything works very well in my own profile and it is the first issue I've had with Windows Vista, I could not understand either by myself or the box of Windows Vista Help could respond. Any help would be greatly appreciated.
  Thank you, Vanessa

  Hi evilkittenofdoom

  Lets try the following.  Even if your account is an administrator, can allow to built in Administrator account and see if we get the error you mentioned before.

  activate the account real built-in Administrator, then log into that account and see if you can set up parental controls.

  1.) open start, type cmd in the search box

  2.) look to the top of the left panel you'll see cmd.exe , right click

  3.) click on RUN AS ADMINISTRATOR, click on continue if prompted

  (4.) a black & white screen appears, type the following:
  
  NET user administrator / Active: Yes

  5.) press the ENTER key on your keyboard. The b/w screen indicate whether the command is successful. If Yes, close the n/b command prompt. Otherwise please try again and careful with typo/spacing.

  6.) log-off. The display will show 3 accounts. Acct 'true administrator', yours and your 2nd account set for friends/family

  7.) to connect to the account "administrator." The system should start the implementation of the Bureau for the account. After that, try to do what you wanted to do with the 2nd account (the parental control settings).
  
  WARNING : a) If you decide to keep this account (Administrator account), be sure to create a password for it.
  (b) If you decide to get rid of it, repeat operations EXCEPT in step 4.) type net user administrator / active: No.

  Please let us know if it helped to solve the problem - thank you

  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message "unable to make changes to parental controls settings. If the problem persists, see your system administrator"when you set parental controls for a user account

  Original title: user account with an effort of parental control

  After logging in to my admin account, I created two user accounts for my children, set up parental controls for both that I created, when I tried to set up the third account that he would allow me to activate parental control. It seems that he is trying to load the screen to give me the parental control options then the window disappers and another small window appears saying "cannot make changes to parental controls settings. If the problem persists, see your system administrator. I close the window, and then open the parental controls for other accounts, and they work very well, allows me the chance to change. I deleted the third account several times, making sure to create on behalf of others, just like I did the first two. Still no luck. Can I have only 3 total accounts? My administrator account and standard users 2.

  How can I get a standard user account third with parental controls?

  Hello

  Create a new user account and check if the problem persists, the problem does not persist in the new user account, then fix the damaged user account.

  Create a user account (Windows Vista)

  Screw a damaged profile (Windows Vista)

  Check out the link below to check if the parental control is correctly defined

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls-activity-reports

  Hope this information helps.

• Administrators password has expired and I can't seem to change even with a backup drive

  original title: password expiration

  OK so my administrators password has expired and I can't seem to change even with a backup disk can anyone help me pleasssseeee!

  Hello

  ·         Your computer is on a domain?

  If the computer is on a domain, you may need to contact the system administrator for the renewed password.

  Microsoft cannot help you recover passwords for Microsoft who are lost or forgotten products. You can go through the article below.
  "Microsoft's strategy concerning lost or forgotten passwords"

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot change the parental control to my admin account. Error message

  When to my admin account, I was able to turn parental controls for UAS oin my children, but when I try to change the programs and other whatnot (so my 5 & 3 years can not access to Quickbooks, etc!) I get an error message saying ' impossible changes to parental controls settings. "  If the problem persists, see your system administrator. "Computer is not on a network and with hunting 4 children I just can't find the time to sit down and understand the problem.  Help!

  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Link above has a very good tutorial on how to set up Parental controls.

  http://www.Vistax64.com/tutorials/95139-parental-controls-Setup-use.html

  Also, read the tutorial above and the 'Related links' tutorials to vistax64.com.

  Both of the above are very good tutorials for any problem with Parental control.

  See you soon.

  Mick Murphy - Microsoft partner

• Parental controls does not: Impossible to make changes to parental controls settings. If the problem persists, see your system administrator.

  Original title: Parental control does not

  Try to set up Parental controls for my son's account. I have an account manager, go to control panel / user accounts / parental control - click on windows expects to obtain two error message with the same message: "unable to make changes to parental controls settings. If the problem persists, see your system administrator. "I'm a sysadmin, so what's the problem?

  On a side note, I have two children on this computer. Had to remove my son because he downloaded a virus. So before the two children had parental control. But when we were going to change their times permit, he would give this error message but weather changes would take place. Now that I am setting up a new account for him, can't get parental controls to work.

  Hello

  Step 1: turn off UAC (User Account Control) and check the result

  See how can I change the behavior of user account control by using the slider? :http://windows.microsoft.com/en-US/windows7/How-do-I-change-the-behavior-of-User-Account-Control-by-using-the-slider

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

  Step 2: I suggest to create a new administrator account and log later in the new administrator account, try to set parental controls and check if it works.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Check out the link below to check if the parental control is correctly defined

  http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Order SSL VPN with Cisco Cloud Web Security

  We have implemented Cisco Cloud Web Security with the connector of the ASA and transfer all traffic port 80 and 443 to the Tower of the CCW. We have enabled HTTPS inspection, and I was wondering if there was anything, we can add in the configuration that would allow us to control (allow/block) SSL VPN?

  #Clientless SSL VPN is not supported with Cloud Security Web; don't forget to exempt all SSL VPN traffic without client service ASA for Cloud Web Security Strategy.

  Reference: http://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/gu...

• How can I change the parental controls after you forget the password?

  Original title: help! I forgot our supervisor password and I need to change parental controls on our IE.

  Help! I forgot our Internet Explorer supervisor password and I need to change the parental control options. Is there a way to reset it or change or something?

  Thank you!

  Hi Becky,

  Thanks for posting your query in Microsoft Community.

  According to your description, I see that you forgot your administrator password and you cannot change the parental control settings.

  You have another administrator account?

  Let's see the suggestion from the following links:
   
  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

  For all windows questions do not hesitate to contact us and we will be happy to help you.