Change FPS with or without change of PACE

OK, I guess this isn't a new topic, but since I can't find something recent and relevant, here goes:

I have an animation that I'm trying to shave a few kilobytes off, and a quick and obvious answer to this would be to reduce the frame rate. Obviously a relatively complex and much animation if I cut back on the FPS, the animation slows down, producing very undesirable results. Lets say for example, I have a file which is of 180 images for a long time, clocked at 24 fps. If I want to reduce up to 12 fps, is there an easy way to cut the timeline in half (do the animation run at the original rate), with all the keyframes, the motion tweens, etc. automatically reduced by a percentage, rather than having to go and manually all cut in half?

Before these other byte shaving suggestions are made, I should say that I am well aware of the problems with things like alpha blends, gradients and reducing the size of JPEG compression. I've already supported such things to get more realistic results.

Any idea anyone can give me would be much appreciated. Thank you!

There is no easy way to "accordion". the chronology of animation in Flash But
for a quick test, you will see that if you change the pace and the test
your movie, the file size will not change. Frame rate has no effect on the file
size. But if the reduction of the duration of the Tween is be the by-product of a
a slower pace, then file size will be smaller - how it is difficult to
say and depends on your tween animations.
Whatever it is, if it should happen, it must be done manually by deleting frames
yourself. There is no built-in Flash automated task. Sorry :(

--
Adobe Certified Expert
www.keyframer.com
www.Mudbubble.com
-----------------------------------
(if you want to email me, don't watch)
-

"Chris Mattingly" wrote in message
News:g77trv$J3B$1@forums. Macromedia.com...
> Ok, I guess this isn't a new topic, but since I can't find something
> recent and relevant, here goes:
>
> I have an animation that I'm trying to shave a few kilobytes off of, and a
> fast & obvious answer to this would be to reduce the frame rate. It comes
> a
> relatively complicated animation and of course if I have cut back on the FPS the
> animation slows down, producing very undesirable results. Let's say that for
> example,.
> I have a file that is long, 180 images, clocked at 24 fps. If I want to
> reduce
> down to 12 FPS, is there an easy way to cut the timeline in half
> (making the)
(> animation will run at the original rate), with all the keyframes, tweens, movement
> etc.
> being automatically be reduced by a percentage, rather than having to go into
> and
> manually all cut in half?
>
> Before the other byte shaving suggestions are made, I have to say that
> I am
> well aware of problems with things like the alpha blends, degraded, and
> reduce
> size of JPEG compression. I've already supported this kind of things to get
> the
> more realistic results.
>
> Preview that anyone can give me would be much appreciated. Thank you!
>

Tags: Adobe Animate

Similar Questions

  • Programs to freeze or close with and without notice.

    programs to freeze or close with and without notice, that it is not a difference if I'm on the internet or not.  I am constantly notices that a certain program has stopped working and will try to restart.  Sometimes it will be and sometimes not.  Sometimes I also get opinion that something or another can be read at 0xxxxfffff or something like that.  I had these problems all the time I've had this computer.  I tried everything I can think of to fix it without success.  I had my provider ISP here at least three times, I returned the computer to the gateway and had replaced ethernet card, I ran several other registry fixing programs, I've updated all the drivers, I rebooted windows program and started from zero to three times, I took the CPU back instead of purchase (new) they said they could find no problem.  Please help me, I want so badly to take this computer at the door, but I can't afford something different.

    Hi Cherarose,

    I suggest that you contact the manufacturer of the computer and to update the drivers from the chipset and updateBasic system of input/output (BIOS) to the latest version, check if this help.

    BIOS: Frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

    Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    Optimize the performance of Microsoft Windows Vista

    http://support.Microsoft.com/kb/959062

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Color variation with or without objects with transparency masks

    Hi, I have a CC PDF Illustrator with multiple pages and multiple spot colors defined by the user and on some pages of an element containing the mask transparency.

    The problem with color deviation between the pages with and without the object that contains the tx masks as they are imported into InDesign.

    Looking at the page in InDesign with the described object, color chart, imported from Illustrator no longer correspond to any PDF file.

    Without the mask tx, correspond to the Illustrator PDF color chart color placed in the shade in InDesign.

    What is going on?

    Thank you! However, when changing of my swatches of color Lab (two requests), I am unable to get a match between my swatch in InDesign (new) and my original (now laboratory) Illustrator.

    I see the right answer in the InDesign forum where Steve Werner tells us to change the space of fusion of the transparency in InDesign, under Edit > space of merger of transparencies.  With the color chart value Lab, CMYK, or RGB mixture actually works.

  • Fast/slow video forward and back smoothly in flash with or without FMS?

    I want to play fast and slow video forward and backward smoothly. Otherwise it is possible increase or decrease fps video to achieve...

    with or without FMS in flash as3...

    Help, please

    The best you can do is seek() in another era and if you do it fast enough "' smooth. What it is based on is the setting of the keyframe for F4V/FLV/MP4.

    Without FMS, you are limited to tends ant () in keyframes. This means that if they value of keyframes 1 keyframe every 10 seconds, you can ask only every 10 seconds. Keep this in mind. It seeks to the keyframe closest at a time that tell you it to look for. This makes research almost impossible smoothly without tons of keyframes that add a lot of the video size.

    FMS has solved the 2 big problems. You can ask at any time with or without a keyframe here and it does not require to download the full video to look further. Progressive will require that you have already loaded the video in the field you're trying to get to. If you fast forward right on page load may not look beyond what it has downloaded.

  • I've recently updated my firefox to my laptop. No longer can I do a search with Google without getting a message that the address of the site/is not secure. How to cancel?

    I've recently updated my firefox to my laptop. No longer can I do a search with Google without getting a message that the address of the site/is not secure. How to cancel? The only search that allows me to see whatever it is is Yahoo that I prefer not to use. In addition, I have to click through a series of tabs to make sure that I know that Yahoo does not feel that the site is secure before it connects. I must tell you that I have strongly dislikes this upgrade and want to return to the old Firefox.

    What is you receive the exact error message? Did you check your date and time? Refreshed Firefox? Refresh Firefox – reset the parameters and modules

  • No power going to the Satellite L655 - 17V PSK1EE with or without ada HQ

    Hello

    I have a problem with a Toshiba laptop. Part number is PSK1EE-05900REN.
    I think it's the water/ESD damaged in any way.

    I looked at the abandoned manual for this laptop but I can't find what the problem so it's (what part of the laptop caused) I will describe where.

    On the underside of the laptop, I have facing of the battery compartment towards me, at the top left of the bottom of the laptop is a smaller ventilation space and a larger right above him.

    When I turned on the laptop the smallest space ventilation seemed a spark and 'burn' something.
    Is anyone able to advise me on which part was burned and how I would go about fixing it?

    EDIT: There is no power going to the laptop with or without the power adapter connected.

    Thank you very much

    Post edited by: Ant1993

    To be honest, I don't think that anyone would be able to tell which part of the motherboard is faulty.
    I think the motherboard is affected, but I can't tell what's wrong there.
    In my view the motherboard needs to be replaced and it won't be cheap.

  • I can't send an e-mail as a group, with or without an attachment, I always get error 0x800CCC0B the message, I have outlook express.

    cannot send error 0x800CCC0B group

    I can't send an e-mail as a group, with or without an attachment, I always get error 0x800CCC0B the message, I have outlook express (not sure which version) under XP, I used to be able to send a group with 500 more emails in it, I tried to narrow the group to 200, but it makes no difference can anyone help?
    Check out this link. Apparently there is a max of 100 recipients simultaneously and they also will disable your account temporarily if you try many times.
     
     
  • Print screen button (with or without the key Fn is) does not start the process?

    Print screen (with or without Fn key) key does not start any process?

    The PrintScreen key is misnamed.  It copies the screen to the Clipboard, so you can paste the image into Paint or other graphics application.

    It has nothing to do with printing [and did not over fifteen years].

    See this thread for some additional useful information - How to use Print Screen on Win7 & where will the image

  • BlackBerry Smartphones Desk top manager 4.7 with or without the Media Manager?

    I had wonderful support from some people really nice, but I need to know what version of the DM 4.7 down load? the one with or without the media manager? I should have put that in the other post, sorry.

    Thanks for your help.

    ladyflatfoot49

    Hello

    Please stay in your original thread agreement?

    To fix this one and I'll try to help in the original.

    I know that you're new, it's cool!

    Thank you

    Bifocals

  • call report forms (with or without parameters) oracle apex

    Hello

    I want to know if I can call report forms (with or without parameters) oracle apex?

    Thanks in advance

    Try to look at this blog: Roels Blog: integration of forms and the APEX: APEX calling forms

    Thank you

    Tony Miller
    Software LuvMuffin
    Ruckersville, WILL

  • Hi guys, having problems installing adobe photoshop 11 (with or without activated antivirus) elements but able to read any other DVD and CD. Can anyone help? See more details. Thank you.

    Hi guys, having problems installing adobe photoshop 11 (with or without activated antivirus) elements but able to read any other DVDs and CDs. error message: Error 1935. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system.

    Download & install instructions https://forums.adobe.com/thread/2003339 can help

    -includes a link to access a page to download the Adobe programs if you have problems with a disk or drive

    Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  • I just bought the edition student pro Adobe Acrobat XI from amazon. The installation wizard does not recognize my valid serial number. I entered it with and without a hyphen. What should I do?

    I just bought the edition student pro Adobe Acrobat XI from amazon. The installation wizard does not recognize my valid serial number. I entered it with and without a hyphen. What should I do?

    Is the serial number a 24 digit code?

    It is best to contact the Support from Adobe and check with the serial number once:

    "Click the button still needing help, and then select the Chat option:

    https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_account-settings _stillNeedHelp

  • After you download CC Office at the beginning of the installation, I get the error 049. It was the 9th try to install for 1 week - with and without administrative rights.

    After you download CC Office at the beginning of the installation, I get the error 049. It was the 9th try to install for 1 week - with and without administrative rights.

    Hello

    Please see error download or update Adobe Creative Cloud applications

    Hope that helps!

    Kind regards

    Sheena

  • How to integrate ESX 4.0 or 4.1 with AD without VI or vCenter?

    How to integrate ESX 4.0 or 4.1 with AD without VI or vCenter?

    As posted earlier, you can use the vCLI of to do.

    And here's a post that explains how to do it from the ESX service console:

    http://www.vmadmin.co.UK/VMware/35-esxserver/55-esxadauth

    -Andreas

  • Calling functions with and without parentheses

    Hello

    I was wondering why it is that I can create a function and call it with or without brackets (for example "select double f" OR 'Select double f()'), but I can call only SYSDATE, CURRENT_DATE etc. without parentheses.  If I do this "select SYSDATE() from dual", I get an error.

    SYSDATE is a function, no?

    Does anyone know?  I'm just curious.

    Thank you

    Jason

    It's funny how incompatible Oracle is. SQL SYS_GUID function must be specified with the bracket, while his counterpart from PL/SQL it takes two ways:

    SQL > set serveroutput on
    SQL > exec dbms_output.put_line (sys_guid);
    EDC6F517330B4F1281739CB7184CD3F0

    PL/SQL procedure successfully completed.

    SQL > exec dbms_output.put_line (sys_guid ());
    2FDB6ECD6F4042CA91068E0CC9EF4599

    PL/SQL procedure successfully completed.

    SQL >

    Reason is - after all the "single engine" about Oracle SQL and PL/SQL are always two separate motors. PL/SQL counterpart functions are declared in SYS. The STANDARD package, so if we want to use the parentheses, we could refer to SYS. SQL STANDARD:

    SQL > select sys.standard.sys_guid from double;

    SYS_GUID
    ---------------------------------------------
    3452B1206ABE484187A09928C1960F93

    SQL > select sys.standard.current_date (double);

    SYS. STAND
    ---------
    JUNE 10, 13

    SQL >

    However, works such as SYSDATE, USER and a few others are not is the standard package and we have not choice but do not use parentheses.

    SY.

Maybe you are looking for

  • device does not appear on the list of devices or parental control - model EA2700

    My son's iPod caused the parental conrols system crash. For some reason any his ipod has shown three times on the list of devices. So, I hit the 'X' on the list of devices when it has been disconnected to remove it from the list. Now, I can't it appe

  • Windows Vista desktop refreshes, said the service is not running

    OK, I'm not very good with computers but learning a lot since mine has messed up. I have a desktop running Windows Vista. The computer his car slowed dow a LOT recently. I ran antivirus and malware. She had detected things and withdrawn. Still not ma

  • -Pop-up blocked notification...

    .. .on the page of all Web sites except (I noticed earlier) this Forum Web site. Hmm... is it because it is without advertising? Notifications are always on the page wanting to install an add-on to Adobe Flash Player. But it is already enabled. Why t

  • loading URL WebView in C++

    I have a property webview and URLs defined in QML as follows: WebView {}ID: mWebViewobjectName: "mWebView."URL: "http://www.google.com".} Then I try to load a different URL in C++ as follows: mImageView = root->findChild ("mImageView"); mWebView-> se

  • Windows 8 Pro: email problems, files not shown.

    I installed Windows 8 Pro on my PC and laptop.  I use a yahoo address.  Problem 1: When I enter the Mail App on the start screen and the e-mail page there is a difference between the "applications" available at the bottom of the screen when the right