Change in the hearing and the levels are different

Similar Questions

• Audiometers showing same output, but the levels are different

  Hello

  I have a weird problem with the meters.

  They show the same performance, but the levels on two different audio tracks are quite different (sources being a tie and a shotgun mics, respectively).

  Waveforms provide different levels and it is correctly displayed when I turn on the audio mixer Panel. But the meters are still flat, i.e. showing only a single output.

  I tried to see the sequence settings and switch between mono/stereo/multi, etc, but nothing helped.

  The files are XAVC-I in MXF. I use CC PP 9.2.0 2015.2.

  best, andreas

  Try to turn the panpot left of track 1 and the panpot of track 2 on the right.

• have 5 LR and CC. The folders are different, some are missing in the CC. And some complete are not available in CC. I'm looking forward to use CC rather than LR5 so how can I make the folders and collections even on each?

  have 5 LR and CC. The folders are different, some are missing in the CC. And some Collections are not available in CC. I'm looking forward to use CC rather than LR5 so how can I make the folders and collections even on each?

  Hi cjohnm,

  You can use the 5 Lightroom Catalog and improve it in Lightroom 6, therefor all folders and collections will be identical in both version.

  Open the Lightroom all holding the key Alt/Opt and select only the 5 Lightroom Catalog and it will switch to it.

  Let us know if that helps.

  Kind regards

  Mohit

• I can't use my options of dynamic links to Adobe first CC for Adobe After Effects CS5 is because the versions are different?

  I can't use my options of dynamic links to Adobe first CC for Adobe After Effects CS5 is because the versions are different? I have to use first Cs5?

  Hi Samuel,.

  Yes, usable only between the same dynamic link versions products. You can complete rditing and export a first Pro CC and take it to After Effects for further editing, but dynamic linking is not possible in this case.

  Using After Effects | Dynamics and After Effects links

  Vinay

• The speaker of low volume, even if the levels are overexploited

  I just got my computer from a melody of Staples yesterday. Today, I noticed that my volume is really low. I tried maxing everything out. I checked the levels under the control panel. Nothing works. Beats Audio levels checked and they are all up.

  I unplugged my speakers to my PC and plugged on my daughter's laptop and the volume is fine, in my PC and the volume reduced to less than half.

  I'm in Windows 8. Have a HP Pavilion. 64-bit system p7 - 1436 s

  Can someone help me with this problem?

  Hello Highland_Lassie,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems with your audio files being low on your computer running Windows 8. I'm you provide a HP support document: use Microsoft System Restore (Windows 8), which you can use to restore your computer to a point in time where your audio worked correctly. It will be re-setup your settings as before when it worked.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a wonderful day!

• How to change all the level made of stored for dynamic calc

  Hi all
  
  I have about 500 members of a level and I want to change their property of stored in dynamic Calc.
  I have not the dimension generate files and my outline extractor does not work (throwing an error from the api).
  Is he in any case other than these I can do without dimension of generation files? (with a new file of rules etc.)
  
  Thank you.

  First, the error from the API may be a known issue with outline Extractor:

  http://www.appliedolap.com/files/olapunderground/outline-Extractor/Essbase%20error%201042006%20when%20customer%20tries%20To%20do%20too%20many%20connections%20from%20one%20machine.PDF

  Or you can update the members directly from the sketch in the EA. And you can select several members by using the ctrl or SHIFT keys to change all the properties at a time.

  Or you can retrieve the members in Excel, click format for a dim build file that modifies the property.

• After I restarted the 2003 server, I get a message on two of my workstations the present on this computer and the network are different

  After you restart the Server 2003 due to a storm, I now get a message on two of my workstations that are different from the current time on this computer and the network

  Hello

  This question would fit better in Windows Server Instances.

• In Lightroom, developing the original window and after photos are different even before treatment

  I'm a newcomer to Adobe Photoshop Lightroom CC 2015.4 but found after importing photo in the window to develop and duplication of the view forward and after that, the photo is different from the original before even I did any changes. Surely, they should be the same. Is it normal or I do something wrong?

  Well, it's a shot in the water, but I think it was affecting a case recently where a defective monitor due to profile either the front or after the image do not display at all, so I thought the sRGB monitor profile could be worth trying.

• First slide and following slides are different sizes at the launch of the server web file .swf

  We use CP5.5, and a .cptx file has been published in .swf. When played locally, he plays very well. However, during the launch of our server web, the first slide is displayed correctly, but all the following slides are huge on the screen and playback controls and half of the screen are not available. I tried to copy all the slides in a new project and publication, same problem. I also deleted on all ppt slides and not republished, no chance. I can resize the project but the difference in size of screen between the first slide and remains of slides, even when I delete the first slide is displayed differently. When I erase it, the first new slide has the problem. Again, the issue is seen only when the .swf is launched from our web server.

  Are there widgets on these first slides?

  You mention that you launch the SWF from your Web site.  He launched you via the HTM files and JS Captivate also publishes?

• Change modes, the objects are arranged on a quiz slide

  Right now the incorrect feedback appears behind one of the possible answers and is not readable. Somehow the correct feedback appears on top. How can I make incorrect comments forward. The possibility of organizing objects is greyed out... Thank you!

  E.

  

  Hello

  You can preview the file (preferably in browser)? He is always behind the answer then? It seems strange, that the captions are normally on the top.

  Lilybiri

• The data are different to iTunesconnect and Omniture

  Hi guys, is there anyone know the differences of download data from Apple and Adobe Omniture iTunesconnect?

  I now have a viewer multi-question on app store application.

  The app and all the slips are free to download.

  However, I found something strange, iTunesconnect download units completely different app is moved from https://digitalpublishing.Acrobat.com .

  Even if I count the install download and app folios together, the results are always different iTunesconnect units, sometimes longer, sometimes less.

  I read the AppStoreReportingInstructions.pdf yesterday and found nothing useful to this question.

  Is there anyone get any what index?

  Hello

  Some reasons for the differences in iTunesConnect (Apple) data and analytics of DPS:

  1. DPS account the first launch of the app, Apple account app install start - there will be a delta between users that are starting to download the app and those who actually run the application. Also consider that if someone downloads the app in iTunes (office), Apple will be marked as a download, even though the application has not been used / started.
  2. DPS cache analytics on the device and sends the resulting data only every 60 seconds. So if a user launches the app, but leaves before the 60 second mark and never returns, Adobe DPS receive data
  3. DPS records hits when the device has been disconnected but sends when the unit starts again online. This means that the count for a particular day could continue to grow over the days or weeks.
  4. Time zone differences - DPS records hits on Eastern time, Apple uses a different threshold for each day.

  Bottom line is that the scope of the DPS are not the same and is not expected to match Apple iTunesConnect numbers.  You can assume that Apple is precise with what they measure and Adobe DPS is accurate to what is measured within the app.  It's two different approaches, measured at two different times, offering two different types of data.

  With sincere friendships.

  KlaasJan Tukker

  Adobe Systems

• Trying to update a table in a second table when the data are different

  Hello;
  I have a the same table in two databases. The database are connected with a DB link. I'm trying to update one table based on the data in the second table when the EMP_ID is but the name does not match.
  
  The table will look like:
  Table name: EMP
  EMP_ID
  LAST_NAME
  FIRST NAME
  MIDDLE_INITIAL
  
  My SQL is:

   
  update EMP TARGET 
      set (TARGET.LAST_NAME, TARGET.FIRST_NAME,TARGET.MIDDLE_INITIAL) = ( 
          select SOURCE.LAST_NAME, SOURCE.FIRST_NAME, SOURCE.MIDDLE_INITIAL 
          from EMP@OTHER_DB SOURCE where 
          TARGET.PHYSICIAN_ID = SOURCE.PHYSICIAN_ID 
          and TARGET.LAST_NAME <> SOURCE.LAST_NAME); 

  This refers to a number of update of all lines not the bit I want.
  
  Any help would be great!

  Hello

  Sky13 wrote:
  Hello;
  I have a the same table in two databases. The database are connected with a DB link. I'm trying to update one table based on the data in the second table when the EMP_ID match

  Do you doctor_id?

  but the name does not match.

  The table will look like:
  Table name: EMP
  EMP_ID
  LAST_NAME
  FIRST NAME
  MIDDLE_INITIAL

  My SQL is:

  
  update EMP TARGET
  set (TARGET.LAST_NAME, TARGET.FIRST_NAME,TARGET.MIDDLE_INITIAL) = (
  select SOURCE.LAST_NAME, SOURCE.FIRST_NAME, SOURCE.MIDDLE_INITIAL
  from EMP@OTHER_DB SOURCE where
  TARGET.PHYSICIAN_ID = SOURCE.PHYSICIAN_ID
  and TARGET.LAST_NAME <> SOURCE.LAST_NAME); 
  

  This refers to a number of update of all lines not the bit I want.

  Any help would be great!

  There is no WHERE clause in the UPDATE statement, so that each row in the target table will be changed.
  If you only want to change the lines that have a match in the source table, then add a WHERE clause (perhaps "WHERE EXISTS (...)) with a subquery miuch very similar to the one you already have), or use the MERGER instead of UPDATE.

  If you want to know, post CREATE TABLE and INSERT statements to recreate the tables they existed before the UPDATE and also post the contents of the table changed after the UPDATE.
  Always tell what version of Oracle you are using.

  Maybe you want something like this:
  {code}
  MERGE INTO the emp target
  WITH THE HELP OF)
  SELECT o.emp_id
  o.last_name
  o.last_name
  o.middle_initial
  OF emp@other_db o
  JOIN emp t ON o.emp_id = t.emp_id
  AND o.last_name! = t.last_name
  ) source
  WE (target.emp_id = source.emp_id
  WHEN MATCHED THEN UPDATE
  SET target.last_name = source.last_name
  target.first_name = source.first_name,
  target.middle_initial = source.middle_initial,
  ;
  {code}
  assuming that emp is unique, at least in other_db.

  It will work in Oracle 10 (and more). In Oracle 9, MERGER still requires a WHEN MATCHED clause, so add one if you must. No matter what he does; the subquery USE will only return matches.

  Published by: Frank Kulash, October 10, 2011 16:45

• The levels histogram differs from the histogram of brightness - why

  The histogram in the levels adjustment layer property Panel is listed in the drop-down list under a RGB histogram and has a different shape than the histogram of brightness in Photoshop. What is the histogram in the levels property panel based on the arithmetic sum of the values of red, green and blue for each pixel without perception of color correction that is included in the histogram of brightness? If not, what is? Why the inconsistency between the levels property Panel and histogram in Photoshop? Thank you.

  Bazsl wrote:

  What is the histogram in the levels property panel based on the arithmetic sum of the values of red, green and blue for each pixel without perception of color correction that is included in the histogram of brightness?

  Basically, that's all. The brightness is the channel of the laboratory.

• Time to Smartphones blackBerry and network devices are different - why?

  My time of the device and network are different in a few minutes. My friends BB is different about 1 hour.

  -Why is this?

  -How do I fix this?

  Unit does not automatically refresh its time.

  What are you time settings? Network or BlackBerry?

  While in Date/time settings > Menu > update time and it will update the time according to the network.

• the service name and the name of the database are different.

  Hello
  
  I had created a database with name PROD, latter I renamed DB HAVE according to the request of management.
  
  But I notice the following things.
  
  1 OS ORACLE_SID variable level is always PROD. (.bash_profile also I have this entries)
  2. starting at sql prompt DB_NAME is HAVE.
  3 al ' service_name watch listener and instance name is PROD.
  
  can someone please explain me, why oracle behaves like that.
  Our applications work correctly with any questions so far.
  
  
  [oracle@qual ~] $ echo $ORACLE_SID
  PROD
  [oracle@qual ~] $ sqlplus "/ as sysdba".
  
  SQL * more: Release 10.2.0.1.0 - Production on Tue Mar 5 10:35:01, 2013
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  Connect to an instance is idle.
  
  SQL > startup
  ORACLE instance started.
  
  Total System Global Area 608174080 bytes
  Bytes of size 1220868 fixed
  209719036 variable size bytes
  394264576 of database buffers bytes
  Redo buffers 2969600 bytes
  Mounted database.
  Open database.
  SQL > select name from v$ database;
  
  NAME
  ---------
  HAVE
  
  SQL >! lsnrctl status
  
  LSNRCTL for Linux: Version 10.2.0.1.0 - Production on March 5, 2013 10:38:30
  
  Copyright (c) 1991, 2005, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=qual.com) (PORT = 1521)))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
  Start date March 5, 2013 10:36:54
  Uptime 0 days 0 hours 1 minutes 35 seconds
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /u001/app/oracle/product/10.2.0/network/admin/listener.ora file
  The listener log file /U001/app/Oracle/product/10.2.0/network/log/listener.log
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=qual.com) (PORT = 1521)))
  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC0)))
  Summary of services...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  Service "HAVE" has 1 instance (s).
  Instance of "PROD", State LOAN, has 2 managers of this service...
  Service 'PRODT_XPT' has 1 instance (s).
  Instance of "PROD", State LOAN, has 2 managers of this service...
  The command completed successfully
  
  SQL > exit
  Disconnected from the database to Oracle 10 g Enterprise Edition Release 10.2.0.1.0 - Production
  With partitioning, OLAP and Data Mining options
  [oracle@qual ~] $

  This last I changed the name of DB to HAVE

  Change the DB_NAME is not the ORACLE_SID. You must manually change the ORACLE_SID.

  Stop the database instance.
  Copy $ORACLE_HOME/dbs/initPROD.ora to $ORACLE_HOME/dbs/initPRODT.ora. (I assume that DB_NAME has already been upgraded IN the initPROD.ora)
  Change your ORACLE_SID of PROD WERE and disconnect and connect again.
  Make sure that your ORACLE_SID is now HAVE and that $ORACLE_HOME/dbs/initPRODT.ora
  Now start the database instance

  Hemant K Collette