The speaker of low volume, even if the levels are overexploited
I just got my computer from a melody of Staples yesterday. Today, I noticed that my volume is really low. I tried maxing everything out. I checked the levels under the control panel. Nothing works. Beats Audio levels checked and they are all up.
I unplugged my speakers to my PC and plugged on my daughter's laptop and the volume is fine, in my PC and the volume reduced to less than half.
I'm in Windows 8. Have a HP Pavilion. 64-bit system p7 - 1436 s
Can someone help me with this problem?
Hello Highland_Lassie,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I understand that you are having problems with your audio files being low on your computer running Windows 8. I'm you provide a HP support document: use Microsoft System Restore (Windows 8), which you can use to restore your computer to a point in time where your audio worked correctly. It will be re-setup your settings as before when it worked.
I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a wonderful day!
Tags: HP Desktops
Similar Questions
-
Audiometers showing same output, but the levels are different
Hello
I have a weird problem with the meters.
They show the same performance, but the levels on two different audio tracks are quite different (sources being a tie and a shotgun mics, respectively).
Waveforms provide different levels and it is correctly displayed when I turn on the audio mixer Panel. But the meters are still flat, i.e. showing only a single output.
I tried to see the sequence settings and switch between mono/stereo/multi, etc, but nothing helped.
The files are XAVC-I in MXF. I use CC PP 9.2.0 2015.2.
best, andreas
Try to turn the panpot left of track 1 and the panpot of track 2 on the right.
-
iOS 9.2.1 update failed due to low memory, although 57 GB was available.
What is the cause and the fix?
EN 57 is the size of your storage. There is no iPad with 57 GB of memory (live RAM). Have you tried to hold the home and power buttons until the iPad reboots? Also try double clicking the home button and close any open applications.
-
Change in the hearing and the levels are different
Posted in the Forum of the Bill thus
http://forums.Adobe.com/thread/854150?TSTART=0
Anyone able to verify this please.
I have a test project in CS5.5 PremPro and I created a Bars and your Clip.
The tone of the clip is - 12db (meter)
I went to 'Edit in Audition' and the same audio wave bed - 15db on VIEW
Thoughts!
In hearing, go in Edition > Preferences > multitrack and changing the Mode of pan left/right cut (logarithmic).
/ Roger
-
Too low volume of the microphone
I just bought a new Toshiba Satellite L500D, with Windows 7, and I'm having a problem with the microphone volume, in this sound recording is barely audible.
I followed all the steps suggested on this topic on the forum: http://social.answers.microsoft.com/Forums/en/w7music/thread/06582922-0014-4dac-9f74-b63f143fbb8e... .but nothing fixed it.
It's a built-in microphone and audio driver is Realtek. I did a driver update check and it integrates the latest version. I all set to maximum microphone volume settings and tried to test records Skype and sound recorder for Windows. They record, but it is extremely low volume, even if I'm leaning closer to the microphone and speak loudly. Different recipients of Skype call could barely hear me. The only thing that saves the high voice is when I run a finger over matte plastic of the monitor frame - which saves super hard for some reason any.
I welcome suggestions as soon as possible. I need my microphone to get the work done!
I hope that the people at Microsoft can remedy the situation as soon as possible, because it is crucial to set!
I had this problem for a few weeks, I recently read a forum post saying uncheck the: allow applications to take exclusive control of the device:
Well, I found this setting and changed a few others and I think that he has fixed
I went through the control panel > hardware and sound > manage Audio devices to reach the acoustic Panel.
I selected reading > Speakers > improvements and made sure that everything was unchecked.
"" I selected reading > Speakers > advanced and unchecked "allow applications to take exclusive control of this device.I went to recording > Microphone > listening and insured 'listen to this device' is unchecked.
I went to levels and assured the Microphone level was 100% and the boost to + 10 dB
I'm gone into improvements and assured that everything was unchecked.
"" I then in Advanced and unchecked "allow applications to take exclusive control of this device.And finally I went in the Communications of the acoustic Panel tab, changed "when windows detects communications activity" to "do nothing".
-
Hi all, I bought a used Tecra A3. With Win XP Professional, service pack 3. I have not all records with him.
It was working well before a week or two ago. It has very low volume, I have all levels of volume and the maximum wave. The manual volume knob on the front has no effect, it used to work
I think the problem started when I downloaded youtube FLV files, then I downloaded a program ('super' was the name of the program) to convert the FLV files into AVI files.
I uninstalled the program of conversion, I failed to convert anything. I've uninstalled and reinstalled the driver of sound card - card his Realtech AC97. I uninstalled and reinstalled WMP11. None of this has helped.On this view, I saw how to do a system restore. I thought to perform the system recovery can solve the problem.
My question is, if I perform the system recovery, to the GET to the elimination of the parameters of the box, it will clear the WIN XP operating system?Thanks for any assistance received, Darren.
Hello Darren
Please do not be angry on me, but make you it so complicated. Let's be clear on this:
Saved on DVD of recovery recovery image contains the operating system, all necessary drivers, Toshiba tools and utilities and some additional applications such as a DVD player. So if you want to install the OS by using Toshiba recovery media will be deleted all content saved on the HDD, formatted partitions and lately OS will be installed. When all is finished you will have clean operating system preinstalled. It will be the same State as the first day after the default purchase.
Then I don't understand what you mean now with the restore process. During the installation of recovery is complete you must not install or configure anything. Just boot OS, install your favorite software, install the Microsoft updates and be happy.
If you have any other questions please post again, but please if you ask something to be clear and precise.
-
Low volume from the speakers.
I have pre-installed Dell with windows 7 Premium. The sound level of the speakers is LOW even when the value to 100%. What can I do to increase the volume. This problem started very recently. Need your suggestions and help.
Thank you...
Hi Bhagwati,
Make sure that your speakers are properly connected to your computer.
Step 1
Right-click on the "speaker" icon and select playback devices, and then click speakers and he grew up their properties. Click the levels tab and use the slider to increase the volume, and then click OK to save the new setting.
Step 2
Open the troubleshooting of Audio playback
http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter
Step 3
I suggest you to update sound card drivers later and check if it makes a difference.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Step 4
Turn on the left and right balance
(a) in the search box type sound start and click on enter.
(b) select the speaker and then click on Configure button.
(c) in the option of Audio channels, select your speaker and then click Next.
(d) give a check the box that says before left and right and then click Next and then click Finish.
Step 5
Also, make sure that the audio is on in DVD quality:
Right-click on the "speaker" icon and select playback devices, and then click speakers and he grew up their properties. Go to the advance tab and then set the DVD quality.
See also:
Let us know the status of the issue. If you need help, please after return. We will be happy to help you.
-
low volume in the 6s iphone call
I bought the new iphone 64 GB 6s in the last week and noted that the volume of the earpiece is quite low.i can't hear calls properly.volume is ok with hands-free bluetooth and speaker kit and only has problem with earphone. I checked all the settings but nothing is useful, then please help as I am very bored with the poor performance of the phone.i follows adjustments, but nothing has worked for me
1. activate the hearig
2. verified volume options
3 restart my phone
4. the latest software is already installed
If anyone has a solution please share otherwise I think back to the android phone that I expected this question in the iphone.
Hello aghaffar16,
Thank you for using communities Support from Apple!
It is my understanding that you experience low volume from your iPhone using a headset. It is certainly not expected behavior.
Looks like you have already made a good troubleshooting. The next thing I would do is try another headset and see if the results are the same. As obvious as it may seem, remember that the headphone is plugged all the way to the iPhone. Don't forget to turn up the volume while you are actually on a call. When not online, the volume allows you to control the music, alerts and other sounds on the iPhone, but not the volume of calls.
More information on what to do if trouble hearing a call can be found here:
See you soon!
-
Walking to Windows 10. Loss of my audio Beats. The volume is very low, so even than the value 100% volume
Hello:
See if reinstalling the audio driver solves the problem...
This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.
File name: sp63555.exe
-
The HT820 ear and lower volume stuck button
I had these headphones for almost 2 years works very well. I don't have a bluetooth phone, but I use my HT820 with my HP Ipaq 211 listening to music or watching movies. I also connected them to my work and the home pc. At work I connected them to the phone Nortel 1150. I just had a few problems since I got to the two atria are beginning to tear. I had them in my backpack and I don't know how, but one ear cushion came off the coast. So I'm wondering where I could get replacement tips? The other problem I have is with the low volume on the left hand button. The button is stuck, but I can live with that, because it is just the right volume level. If I don't find any guesswork replacement I can buy another pair and I can leave the old one at work since I can use it with the 1150 of Nortel. Thank you
Join this other thread:
As for the volume key. This aspect will likely be repaired if the warranty is only for one year. Sorry!
Mark
Support Forums Manager
-
I had recently an update for Nvidia (price reduced it more nothing to do with visuals) uninstalled most recent program installed (silverlight) - made no difference. Uinstalled SRSsandbox, he had previously given me trouble with volume, so I had this option unchecked. Ran the microsoft Fixit program, but no fault found with my system.
No error message, just c. low volume!
Thank you for your offer to help old companion. The installation/re-installing the audio driver does not work (apparently wasn't the problem) I finally solves the problem by uninstalling the "device high definition audio" and then re-install. Problem solved! -Thanks again for your interest - steve
-
The Bluetooth media suddenly got very low volume
I was happily listening to Pandora via bluetooth for months, when all of a sudden about two weeks ago, the volume got so low I can barely hear it. I checked the media volume control and it is bent full. Bluetooth phone call volume still works fine and is generally of fort to operate in full. I tried deleting and reinstalling Pandora, but no help. I also tried another internet radio app (Slacker), but he also plays very low volume. The only changes that I know are updates frequent free app I install I'm warned.
Does anyone else have a problem like this? Should I try a hard reset?
Thank you
Galán (Droid, 2.1 - update1)
I did and I had to wipe my phone bluetooth devices and reboot then re add devices. This took care of it.
-
HP G71-340US low volume when audio sound on the highest rate
Very low volume with sound levels at the highest point, intermittent reception during audio streaming, loud buzz unknown sometimes for unknown causes. I own a hp G71-340US since 4/10... and am these audio problems. Y at - it an update to fix this problem?
Hi Sharopa
Try reinstalling the audio driver...
Follow these steps:
1. click on start and then type devmgmt.msc in the start search box and press on enter.
2. from the list of devices, expand sound, video and game controllers.
3. right click on the sound card, and then click on uninstall.
4 restart the computer.After restarting the computer, sound card get installed automatically.
If the problem persists, please upldate the audio driver following the steps mentioned below.
Install an updated audio driver
-
The internal microphone too low volume
I have a new dell inspiron 5050 w intel core 3 and windows 7 and internal microphone level is not high enough. The level is set to 100 and up to 20 dB boost. Skype calls cannot be heard and sound tests have a very low volume. I heard that maybe that's a problem with windows 7. Some of those who have upgraded to vista say they have the problem. Driver update is grayed out. Thought of the back of computer. Another solution?
Hello
1. what the audio output of the computer?
2 have you made any changes to the computer before the show?
Method 1: Run the following fix - it:
Automatically diagnose and fix problems of Windows audio recording:
http://support.Microsoft.com/mats/AudioRecording/
Method 2: Uninstall and reinstall the sound drivers.
See the following steps:
(a) click Start, right click on computer.
(b) click on properties, click on Device Manager
(c) expand sound, video and game controllers, right click on the audio adapter option, click on uninstall
(e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.
-
How can I stop Winodws 8 music to move to a low volume, when the focus is lost?
When I play music through Windows 8 music metro App, it falls to 20% volume when I do anything else on my system. For example, I'll start playing some Nightwish, go see my mail and the music will be 20% in volume.
The only way that to work properly, it seems to me is if I have the music app line up on one of my monitors (I have three) and use only desktop applications. If I touch any application metro except for the music, the music will be reduced to a low volume.
I've been running Windows 8 on my laptop (screen only) for a while now and do not experience this problem. Would it be because of multiple monitors?
I'm really at a loss because the only other fault I have with experience is not having a list of music being downloaded when you download something from Xbox Music - its almost perfect.
It was the first thing I tried, and it has not changed the behavior of the application.
However, I have noticed there are updates available for the included applications and after you apply the update on the implementation of the music (I had to reboot for updates to be applied, although it's telling me to do), the music app is more exposed its tendency to decrease its volume while running in the background.
Maybe you are looking for
-
Satellite A210 - 151 - Downgrade Vista to Xp-need Driver 4 - FN keys & card reader
As already explained in my topic, I've finally downgraded from Vista to Xp -My card reader not working - tried different cards... nothing!-Also-keys Fn don't work... loaded each Hotkey-utilities (all languages) for Xp...He tells me that I can not ins
-
HP ENVY 15 t-j000 Quad Edition CTO, want to know your computer screen model
-
Cursor Vista runs without clicking, I want that he stop doing that.
If the cursor is positioned on a program button for a few seconds he seems to think you want to click on this button and it will run. I want to disable that stupid thing, it of boring and could potentially cause me serious financial problems while pl
-
M1217nfw how to change a wireless Ethernet
I have my printer M1217nfw configured to use the wireless network. Is there an easy way to switch to the use of the Ethernet cable rather... without uninstall/re-installing of all machines on the network?
-
Wacom Intuos driver for WIN 8?
WIN 8 rightly recognizes my Tablet intuos (GD-0912-U) chart, but there is apparently no availbale drivers. Those provided by WACOM support do not work. Any help would be welcome! Thank you.