Change in the sensitivity of touch-pad on the HP Pavilion dv7

Similar Questions

• Hi can I please have a link to download the drivers for my laptop hp remote is the hp Pavilion dv7-6c60us entertainment pc

  Hi can I please have a link to download the drivers for my laptop hp remote is the hp Pavilion dv7-6c60us entertainment pc

  Pilots come from HP. You can get them here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5218602

  You might consider posting here as well.

  http://h30434.www3.HP.com/

• How to change laptop Gateway running Vista touch pad sensitivity?

  I have a laptop Gateway running Vista.  My problem is that when I try to use the touch pad, the screen jumps all over the place.  As if I was scrolling up or down very quickly.  Any ideas? Thank you

  * original title - help help my screen jumps *.

  Hi M.MARRIN,

  ·         If it works much earlier? If so, then remember to make changes to the computer, after which the issue started?

  If you run your finger vertically down the outer edge of the touchpad and then the scroll bar will be activated. If you do not want to use the scroll bar or if you want to reduce the sensitivity of the scroll bar, then you can try to modify the settings of the mouse. Take a look at the following link for more information or take a look at the manual that came with the computer and check how to change touchpad settings:

  Change the settings of the mouse

  I hope this helps.

• Touch pad issues on nine Pavilion x 360

  I just bought a brand new HP Pavilion 13-a010dx x 360. After a few days the lower part of the touchscreen Tablet felt loose, especially on the left hand side. From the beginning I had problems with the mouse jumping around, Windows restore, change the size of the screen etc. I played with the sensitivity of the touch pad, off settings by attaching masking tape and all the gestures with multiple fingers, but it still occurs. It's really frustrating because there are less than three weeks, I bought the laptop.

  I have to get the touch pad replaced?

  Thank you

  R

  Hi @RDF1 ,

  Thank you for visiting the Forums HP's Support and welcome. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link for the number of support in your region. They will be happy to help you immediately.

  Thank you.

• Impossible to add an external monitor or adjust the brightness of the screen: Pavilion dv7-4031TX (Windows 7)

  Hello

  I recently replaced both hard drives of HDD2K12, which meant I had to re-enstall Windows 7. Since that time, I have no options more in using an external monitor or even the brightness of the screen. The computer does not recognize the monitor when I Plug and all my drivers are up to date.

  Can you make suggestions that could help to solve these two problems?

  Kind regards

  Peter

  Thanks to find the links but I could not find the drivers I need for a Pavilion dv7-4031TX.

  However I finally managed to fix the problem. Let me summarize what has been my problem.

  (1) I could not adjust the brightness of the screen by using the function keys f2 and f3.

  (2) I couldn't find the brightness slider if it was generally... i.e. (control Panel\Hardware and Options of Sound\Power)

  (3) my laptop would not recognize an external monitor.

  How I solved the problem:

  1 > pass.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-95107-1 & CC = in the & DLC = in & LC = on & os = 4063 & Product = 4253423 & sw_lang =

  and go to the graphics driver and download the graphics driver and follow the directions. At the end of the installation you will be asked to restart the computer.

  0nce you have restarted your computer, you should be able to adjust the brightness of the screen using the fn keys or the brightness slider in the window 'power Option '.

  2 > Activting 2nd monitor

  Click on Device Manager... At start-> right click on 'Computer' and click 'properties '. Click on "Device Manager". Now click on "monitors".

  Now connect the exernal monitor to your laptop while watching where the monitor icon appears under "monitors". It should appear as 'Generic PNP monitor'.

  Now, right-click on it and select "update driver software... "then search automatically for updated drivers. Install the new drivers. You should see the generic 'PNP monitor' name change to another name.

  3 > restart your computer. You should find that after doing all this, you should be back to normal.

  Concerning

  Peter

• HP PAVILION DV7 4051 NR: HOW TO REPLACE THE LID OF THE HP PAVILION DV7 4051 NR

  I'M TRYING TO FIND A VIDEO THAT COULD ME TELL HOW TO CHANGE THE COVER ON MY HP PAVILION DV7 4051 NR. I LOOKED THROUGH MANY PAGES ON THE INTERNET, YOU EVEN ON THIS SITE SUPPORT AND TROUBLESHOOTING OF TUBE AND FOUND NOTHING. I' BE VERY APPRECIATED IF ANYONE KNOWS WHERE TO FIND A VIDEO WITH STEP BY STEP INSTRUCTIONS. Thank you.

  @Pitirre

  Thanks for the reply,

  The link that I posted earlier, gives you the step by step guide on how to replace specific parts depending on the product you select in the list of options that appear.

  Although, given that it does not work as I expected, try this video (youtube-3rd part - please avoid ads)

  If you want to help others looking for the same solution, as you found, mark the message as acceptable Solution.
  If you wish to testify of my effort, please click on the thumbs violet icon at the bottom of my comment.
  
  And I hope that you have a good day Ahead.
  
  Kind regards

• problem with the hp pavilion dv7 1195eo

  Hello

  I buy Pavilion dv7 1195eo in Sweden. Reinstal Windows and now I have little problem. I can't find drivers for Ethernet controller. Now I have six unknow devices. I found the drivers on the Hp page but I can't install it. I have procesor AMD Turion X 2 dual-core mobile RM-72, main Board HP 30FD, BIOS HP F.21, 3 GB of RAM and Windows Vista Home Edition SP1. Where can I find the correct drivers. And the chipset drivers.

  donkamillo1979

  Then use these drivers 32 bit:

  Chip set:

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#3

  The rest:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3795471

• HP Pavilion dv7-4285dx: the HP Pavilion dv7-4285dx upgrade hard drive

  Can I replace the stock 640GB hard drive in HP Pavilion dv7-4285dx with a 2 to or is there a limit of 1 TB?

  If not, I would like to add another hard drive in the second empty Bay, but don't see any plug for the extra cable in this notebook.

  Laurie

  Hi @LaurieJC ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv7-4285dx Notebook and want to improve the hard. Here is a link to your service manual page 48 for Hard drive specifications. I checked on the possibility of installing 1 TB and it shows me if you keep to 1 TB 2.5 internal SSD SATA 6.0 GB/s • 555 MB/sec in reading, 500 MB/s write plug, you'll be fine.

  I hope that this address your concerns.

  Thank you.

• Fingerprinting and display does not work after the recovery of the system (Pavilion dv7 4080us)

  Hello.

  This weekend I decided to do a restore of the system on my Pavilion dv7 4080us (LW170UAR), as I have done several times previously, using the built-in HP and the recovery etc. partition manager.

  Operating system is Windows 7 Home Premium 64-bit, and everything worked OK with the new facility, with the exception of two things:

  • I don't see my AMD display driver listed on device listing Manager. Only 'Intel HD Graphics Family' is listed under graphics cards. I tried to download the drivers from the support page, but it doesn't help.
  • The fingerprint reader does not work. I tried to uninstall the drivers and software several times, rebooting and everything else I've seen that suggestions on these forums, with the files found on the support page of my laptop. No luck yet.

  I would appreciate any kind of help. Thank you!

  Excellent!  I am happy that you now have the correct drivers installed.

• How to use system recovery after OS change to the g4 pavilion 1305 to the

  Hello

  My name is SUNIL GUPTA

  I have laptop model g4 1305-UA Pavilion, preinstalled OS Win7 Home Basic 64 Bit.

  I was changed for Win 7 Ultimate 64 Bit with clean install.

  And now I want to reinstall Windows 7 64 Basic Home Edition.

  Am that I reinstall with my recovery disks or not?

  and if so please tell me...

  Hello

  You can use the following method to create your own family Windows 7 Edition installation disk basic 64-bit.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC. However, it not there no download directly available for Windows 7 Home Basic Edition, so you'll need to download another version (one will do, but the link below is for Windows 7 Home Premium 64-bit - the source is Digital River).

  Windows 7 Home Premium SP1 64-bit

  For the key on your label of COA to work, you must now use the method described in the following link to convert this ISO to an all-version Installer.

  http://www.SevenForums.com/tutorials/85813-Windows-7-universal-installation-disc-create.html

  Once that is done, use an application like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You could possibly need for your laptop can be found, additional drivers and software here.

  Best regards

  DP - K

• The HP Pavilion dv7-3085dx BIOS PASSWORD

  Hey guys, I was wondering if you can help me...  I need to change my configuration of the bios, but I do not know the password, what should I do?

  When I try to access the bios, a blue box appears with the message, enter the administrator password, but I have never created a password.

  Thanks for you time =)

  Try > 43869296

• How do I know which hard drive contains the operating system in the Hp Pavilion dv7-4069wm? The upgrade.

  I think the upgrade of one of my hard drives (ea 320) in my HP Pavilion laptop dv7-4069wm for more storage.  I like to keep the drive that contains the operating system to avoid the hassle to make a copy, but I'm not sure which one that is. I have not replaced a hard drive before, and still less a double disc. Recently, I added more RAM and noticed that both hard drives looked the same. Can someone tell me how to know the difference?

  Hello

  Drive main HARD with the operating system is shown in the diagram at Page 49 of your maintenance & Service Guide.

  Kind regards

  DP - K

• Cannot start the HP Pavilion dv7 - Intel(r) WiFi Link 5100 AGN

  the WiFi has been disabled by the Device Manager, and I can't activate it

  When I get in the Device Manager, one! sign was shown next to Intel(r) WiFi Link 5100 AGN, and I click Properties, the device status displays the message below:

  "This device cannot start. (Code 10)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  When I click on "Find solutions", it displays 'could not load driver software' and no solution appears

  I tried the function "update driver" and still no idea to him.

  not the product. My dv7 is VQ971PA #AB5. Model no. dv7-2124TX is

  Thank you!

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  (1) unplug the battery adaptor & then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

  (2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.

  (3) try to do a system restore to the date where unit was working fine.

  (4) Please update the Bios driver & wireless from the HP website.

  (5) click on start search type Recovery Manager, and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.

  (6) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

  If you still have the same question so you must call HP tech support and get the replacement of the part.

• DVD door pop open randomly, the HP Pavilion dv7-3079wm

  Dvd door opens at random and takes a few tries so he can stand firm. Y at - it a setting that I can do about it.

  Hello

  Please find the link given below check Maintenance and Service Guide 4-7 will guide you through.

  http://h10032.www1.HP.com/CTG/manual/c02638165.PDF

• After restoring the system Pavilion dv7-4090 ca with Windows 7 will not play blu - ray movies.

  has worked before system restore now it shows only a white screen

  Hello

  If you use HP MediaSmart DVD to read Blu - ray disc, try the following.

  HP now provides a version of PowerDVD 10 Cyberlinks which seems to be a better solution.  Download the installer for it on the link below and save it to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53029.exe

  When the download is complete, open windows panneau Panel configuration, open programs and features, right click the entry for HP MediaSmart DVD and select uninstall - once this process is complete, restart the laptop.

  When windows has reloaded, double-click the installer for PowerDVD 10 start the installation.  Once this done, see if your Blu - ray disc now plays OK.

  Kind regards

  DP - K