Change laptop settings

Similar Questions

• My laptop goes to "standby mode" much too quickly (Windows 7). How can I change the settings to extend this time?

  original title: sleep mode settings

  My laptop goes to "standby mode" much too quickly (Windows 7). How can I change the settings to extend this time?

  Click on start > Type, sleep > change when the computer sleeps

• Why my laptop Windows 7 same dim so I changed the settings?

  Hello. I use a laptop ASUS Eee PC with Windows 7 and I noticed a problem that I can't solve. I decided to change my settings to allow my laptop ever less bright and put into hibernation. However, it fades little matter what I try. I went to power settings to set all the parameters brightness and all say 'never '. I already searched the Internet for alternatives and found that it could be the Adaptive brightness. However, when I went to the power settings advanced and looked into the display list where the Adaptive brightness setting should be, he was not there. No option to disable the Adaptive brightness. Even if all my settings are confirmed NEVER to cloud my screen it still happens. I found another way to disable this feature and it is through services.msc. I have disabled the function of Adaptive brightness, but without success. Then I found yet another way to open the Intel Graphics Control Panel. I put the settings to use the high performance and never dim. Once again, without success. My screen turns off every 30 seconds that it is not in use. Can you please tell me what could be the cause of the problem? I have searched with the search terms different and no success. I really want my screen to stay alive, no matter what. What else could be the problem?

  Paquito,

  1, 2 of these results, I don't think that your computer screen has Adaptive brightness.  The subject is a Kipper.

  3 I used a path of the folder of the example.  I don't know the path to your own office.  "Type in this [but substitute a folder path of your own to a convenient location], and then press enter powercfg - qh > D:\Desktop\ThisPowerPlan.txt"replace D:\Desktop with something like C:\Users\YOURUSERNAME\Desktop or practice any other path to any folder on your computer. "  (You can show that it was the only problem involved by entering just powercfg - qh as this will show you the long results lists [too fast to read] so that you know the basic command works.})

  3 I think that when you look at the results text file, you will have the same values that my computer, therefore demonstrate more that your computer screen did not display adaptive capabilities.

  4 it is possible that you will get the same results for the Dim display settings than me or you could get zero who indicates that there is always a delay of graduation [this seems to indicate that the system is somehow not getting the power plan settings that you have entered in the Control Panel, power management].  If so, copy & post back the same vein I posted in my para 4 above.

  Denis

• Laptop battery only charges to 79%. Think I've changed the settings earlier to save the battery of thea, but now want to 100% load again.

  My laptop battery is ok, but still only charge up to 79%. And stop there. What should do? I changed the settings as soon as possible to save the battery, but now wants to load 100% again. I can't find where to change them back.

  If you start in System Setup (BIOS) - before any loading of the operating system - and look at the section health and charge battery... What percentage watch battery is charged it?  What status?  If leave you it in the BIOS and let it load this way - it's 100% top?  If so - what happens when you start in Windows?

  (Trying to confirm this, it is an error within the OS and not a hardware problem).

• Cannot install Internet Protection software after changing some settings in the laptop.

  Hi Expert,

  The Technican MS taught me to change some settings in order to solve the problem of Windows Update. However, not able to install McAfee Total Internet Protection thereafter. I have to reset some setting?

  Need for emergency assistance.

  THX.

  Ray

  Hello

  happy that you guessed it sorted

• How to change the settings of the BIOS on Satellite L30-134?

  I have a toshiba l30-134 and I can not for love nor money to update or to unlock my BIOS. Yes before you repeat the usual speal on laptops is limited. I know they are!
  BUT... the BIOS on my laptop is, at the end of the day an interchangeable accordingly with appropriate tools and integrated program.

  It is well known that large computer makers lock end-users to access these options to stop their valuation there own bought and paid for PC, so that they can not go out and buy a cheaper machine, and improve it. It is also a common misconception that laptops are not expandable. That's what they want you to hear. It is not true. OK, so you can't plug loads of PCI cards or graphics in it, which would defeat the object anyway.

  Extensible components in a laptop ARE IN FACT evolving for example, memory and HARD drive.
  There are several options that I would see in my BIOS, I know they are there, and I know that they have been hidden.

  Why, oh why can't get rights to access these options? After all, he has bought and paid for, and if I want to tinker with it why I shouldn't. She belongs to me now.

  I have a few tools that will change these settings in the BIOS, Phoenix BIOS editor and WinPhlash, but again, I have not found a downloadable BIOS for my machine. But believe me when I do I will be changing the options in the BIOS. And I hope I'll be able to put together one guide for others who also believe that they can change it machines anyway they see fit.

  Watch this space!

  You can have a BIOS custom-made on your laptop, but not through an official site like Toshiba.
  I do not understand what options you believe was hidden from the normal user like you and me.
  In addition, I doubt that you can improve the performance of your laptop by changing the Firmware into something else.

  Once a stable Firmware is made to a system, it is preserved and everyone (manufacturer and user) are happy
  with the result.

  Concerning

  chain

• How to change the settings for the Touchpad on Portege R500

  Hello world
  I have a problem with my touchpad settings.
  Can I know how can I change the settings of my touchpad?

  The touchpad settings can be changed in the dashboard-> pout.

  There, you should check the PIN.
  On my laptop, the device settings tab provides an option to access the Synaptic touchpad settings.

  Check it!

• How to change the settings on the Equium A100 color & contrast

  Does anyone know how you change the settings on the Equium A100 color & contrast? Thank you.

  Hello

  Change the contrast and color?
  Well buddy, you can change the screen brightness level using the FN + F6 and F7 key combination of.
  The other settings are only editable in the properties of the graphics card.
  I put t know what graphics card you are using but usually you must search advanced options.
  Check if there is no gamma, brightness or contrast settings.

  I found these settings on my laptop. I have a graphics card intel and the option was called the color correction

• Changing the settings of the BIOS with Satellite L505D-S5006

  Hello! I am trying to access my BIOS to change some settings in it, but when I enter the BIOS Setup I can't change anything in there (everything is greyed out) and the options are minimal. Currently, my BIOS version is 1.0.0. I tried to download the needed update for it, but when I install and try to run it, it says "cannot retrieve information from the system BIOS. BCPSYS block signature not found. Error code:-100. »

  I am downloading from this page here: [http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp?service=EU]
  * Product type: * for laptop
  * Family: * satellite
  * Series of products: * Satellite L series
  * Model: * Satellite L505D
  * Short model: * (for some reason any the only option here is PSLT9E, but my PSLV6U reading on the bottom of the laptop.) This has something to do with not updated to the correct version, I wonder?)

  So I have to skip the last step and [http://eu.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fbios-20100510134014.zip] appears so I downloaded and installed and that's where the problems start.

  In short, there is an another easier way to enter a BIOS where I can change the settings? Or what I need to find a different BIOS update?

  Thanks in advance for the help!

  The whole story is a bit strange.
  Every new notebook comes without any limitations of the BIOS, and when you buy a new laptop, for that you must have full access to all the available BIOS settings.
  So the question is:
  Have you bought this laptop like new?
  Is - the first time you try to change something in the BIOS?
  You may have defined user password (Toshiba Assist > course > user password)?

  You can use Toshiba hardware configuration tool to change the settings (settings of the BIOS)?

• How to change my settings of codec audio idt high definition.

  Hi I want to change my settings from the stereo to the surround out in my laptop 2204tx g6 in idt hd audio codec.tried but failed.my idt settings shows only stereo. Any solution please?

  Hi Arvind99,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion Notebook g6-2204tx and change the sound settings. Here is a link tosound questions.

  I hope this helps.

  Thank you.

• Cannot access BIOS after closing down and also can not use change PC settings either.

  Hello

  I am wanting to access BIOS so I can restart the computer with windows 7, since I had nothing else problems with windows 8.1. It messed up my registry and now I can't use one of the windows in all applications, just the office part. (Computer worked fine with windows 8 before that I "upgraded", if you can call it.) So either no access to change PC settings and the BIOS keys do not work when you press during loading. Help, please

  Hello

  Try the following.

  Shut down the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Now on TAP the ESC key as soon as you press the power button to see if it will launch the Start Menu.  If this is the case, select f10 to open the bios menu.

  Kind regards

  DP - K

• Changing the settings to default print with CUPS still does not work, regardless of the application

  Hello, I looked through a number of positions on the definition of default printer in a Mac, but nothing solve my specific problem. I recently spent a PC to a MacBook Pro, just updated to Mountain Lion and installed my printer wireless, HP Deskjet F4500 Series, with the pilot chosen by my computer. The printer-computer connection usually works, but when I go into the CUPS and change the default settings for Fast Draft, n/b only, it does not apply when I print. I tried several times, making sure to save my default settings in CUPS (and indeed they appear here as Fast project, b & w only), but no matter which application print from - Safari, Chrome, text edit, etc.. - it prints in color and normal mode unless I manually selects the settings for that particular print job. This is especially a problem when printing things that are not pop up a print dialog, such as online coupons. I could easily change the settings of the default printer on my laptop and they apply to coupon print as well, but I'm having no luck with the Mac. Help, please! Thank you!

  Finally I got it solved!

  There are two options in Mountain Lion when you add the printer HP CM1415fn (Apple-> preferences-> Print & Scan system): "AirPrint" and "HP LaserJet CM1410 Series.

  So, with "AirPrint" set default CUPS Options has no effect, even if you change. PPD file.

  Fortunately, with the 'HP LaserJet CM1410 series' setting CUPS the default Options works well!

• How to change laptop Gateway running Vista touch pad sensitivity?

  I have a laptop Gateway running Vista.  My problem is that when I try to use the touch pad, the screen jumps all over the place.  As if I was scrolling up or down very quickly.  Any ideas? Thank you

  * original title - help help my screen jumps *.

  Hi M.MARRIN,

  ·         If it works much earlier? If so, then remember to make changes to the computer, after which the issue started?

  If you run your finger vertically down the outer edge of the touchpad and then the scroll bar will be activated. If you do not want to use the scroll bar or if you want to reduce the sensitivity of the scroll bar, then you can try to modify the settings of the mouse. Take a look at the following link for more information or take a look at the manual that came with the computer and check how to change touchpad settings:

  Change the settings of the mouse

  I hope this helps.

• Windows 7 "do not have permission" - Internet Time - > change the settings

  I have Windows 7 Pro 32 bit installed on my laptop. I have only one configuration of account which I am the administrator of the computer.

  When you try to access the control ' Change settings ' to 'Date and time'-> 'Internet time' I'm stuck with the following message:

  "UNABLE TO CONTINUE - you are not authorized to perform this task." Please contact the administrator of the computer to help. »

  What is happening and how to fix this? It seems a little silly that I as the administrator have blocked access to this.

  Your thoughts and your advice on this would be appreciated gratefully.

  Thank you

  Matell

  Matell salvation,

  Welcome to the Microsoft answers site.

  Step 1:

  First of all, I suggest that you enable the default administrator on the computer and check.

  To activate the default Administrator account, follow these steps:

  1. Click Start and type CMD in the start search box

  2. right click on CMD in the list and click "Run as Administrator"

  3. type the following command: net user administrator / Active: Yes

  If it works then it could be a problem with the damaged user profile, go to step 3.

  Step 2:

  I suggest that you turn off user account temporary on the computer and check if you are able to change the time settings on the computer Internet or not.

  1. click on start.

  2. click on Control Panel.

  3. click on user accounts.

  4. click on change user account settings.

  5. drag the slider to never notify.

  6. click on OK.

  Now check if you are able to change the settings, if the issue is resolved, I suggest you turn back to normal user account settings.

  Step 3:

  If the problem persists, I recommend that you temporarily disable the security software and firewall in the security software on the computer and check.

  Make sure that you enable the security software on the computer.

  If the problem persists, I suggest that you create a new user profile on the computer and check because this could be a problem with the profile of the user.

  Check out the link to correct the corrupted profile: difficulty a user profile is corrupted:http://windows.microsoft.com/en-XM/windows7/Fix-a-corrupted-user-profile

  Let me know if it worked.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to change laptop screen between landscape and portrait?

  How to change laptop screen between landscape and portrait?

  I have an ACER ASPIRE 5335 running Windows 7 Pro 32 bit and using the Intel Graphics Media Accelerator driver who pointed out that I use the Chipset Intel 4 Series Express.

  I tried the things:

  1: from the keyboard - Ctrl-Alt-Left/Right Arrow (worked with Vista) no change

  2: Control Panel/display/resolution/Advanced Settings - tab Intel -Intel Graphics and Media Control Panel /Options and support/Hotkey Manager - the value of the Hotkey - active (worked with Vista) feature no change

  3: in the notification area - right click Intel display options icon/graphic/rotation - click ' 90 or 270' (worked with Vista) no change

  4: right-click and open Intel Graphics and Media Control Panel /Options and support/Hotkey Manager - the value of the Hotkey - active (worked with Vista) feature no change

  Help please,

  The man from FarAway

  Windows does not include hardware drivers or a screen rotation capabilities.  As your hardware or the hardware driver software does not change, it may indicate that you must reinstall the software, perhaps with a more recent version, you can do it from the manufacturer's website.  Alternatively, because the function doesn't do not part of the Windows operating system, you need to contact Acer support.

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle for the lelft. Thank you!