change name of database controlfiles after restoring?

Similar Questions

• How to change NAME and intellectual property after installation of RAC.

  Hi friends,
  
  I have here a challenge... If you'd be grateful if someone can help me...
  
  I have to install Oracle RAC 10.2.0.3 on windows 2003 server 64-bit.
  
  My problem now is the server names and ips are defined and I'll install the RAC.
  
  But the need of the customer is that after a month, they need to change the names and the IP addresses of the servers (a time change).
  
  Because according to their Server naming standards, the current production servers have the accepted names and ips.
  
  Installation was on a BONE, 32 bits while they are facing errors of process memory. That's why they're going OS 64-bit on the new servers.
  
  After that the new servers are ready, data will be migrated to the new server. After a month, they need to change the names of the new servers for the old servers (current production).
  
  Could someone help me by giving me information on how to change the NAME and the IP after a RAC installation?
  
  No matter what metalink note or orders because it is...
  
  Thank you
  Mahesh.

  Hello Manu,

  In this case, you must reinstall the CRS again.

  Kind regards
  KK

• Recover the database failed after restoration

  Dear people,

  We are trying to restore the RMAN backup on another Linux machine. We did this activity several times. The backup has been taken from a RAC instance and we are trying to restore to RAC. After the success of the restoration of the data files, while we publish "recover the database'; It ends with the following error messages:

  RMAN-00571, RMAN-00569
  RMAN-03002 recover command failed

  RMAN-11003 failure during parsing / execution of the sql statement: alter database recover if necessary until cancel using backup control file

  ORA-19801: DB_RECOVERY_FILE_DEST initialization parameter is not defined

  ORA-00280: change 123123213123213123 thread 1 is in sequence #10787

  Kind regards

  Ali

  ProDBA wrote:

  Dear people,

  We are trying to restore the RMAN backup on another Linux machine. We did this activity several times. The backup has been taken from a RAC instance and we are trying to restore to RAC. After the success of the restoration of the data files, while we publish "recover the database'; It ends with the following error messages:

  RMAN-00571, RMAN-00569
  RMAN-03002 recover command failed

  RMAN-11003 failure during parsing / execution of the sql statement: alter database recover if necessary until cancel using backup control file

  ORA-19801: DB_RECOVERY_FILE_DEST initialization parameter is not defined

  ORA-00280: change 123123213123213123 thread 1 is in sequence #10787

  Kind regards

  Ali

  1. as you have said several times, you performed the restore, then you have not yet checked the parameter above so defined or not?

  2. I hope that its very easy to understand ENGLISH characters

  3 try to correctly set the parameter and size, try again to display the error (since some changes for thread 1 is necessary (hopefully, you gave 123 repeatedly instead of posting of the number of real change in your message))

  -Pavan Kumar N

• Path of redo logs after restoring controlfile

  Hello!
  
  After restoration of the controlfile I see distorted redo logs metadata (column v$ logfile.member):

  $OH/dbs/data/ora/MY_SID/rlog/redo1a.log

  in the redo logs placed in another directory, source database
  also I should drop logfile member and log file groups, and then create them again, but may be there other way to solve this problem?
  Please notify.
  I'm usung 11.2.0.3
  
  Thank you and best regards,
  Pavel

  As I said earlier, is that your database is working well? If so, then forget those files which are present in $OH/dbs/data/ora/file/rConnectez/MY_SID. Ok?

  Suppose now, the question is what are these files? Who created/copied?
  So the answer is if these files are used by your this database (MY_SID); that can be confirmed by query:
  Select Member from v$ logfile; then the redo logs are used by this database else chances are these files were the first part of this database, but not now due to may be a corruption that happened, so another / previous DBA has left.

  And if the database is not running, then what is the error you found it please post it here; otherwise leave these files such what.

  Concerning
  Girish Sharma

• I changed my apple ID and password user name and it changed on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  I changed my apple ID user name and password on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  OK, just to clarify: you always use the same Apple ID, but you changed its name, correct?

  If this is the case, you can go to iCloud.com or use find my iPhone app (free on the App Store) of one of your devices to remove the 4th icloud.

• How to change the DBID of cloned after cloning database?

  Hello
  
  After cloning, the DBID of primary and cloned database have the same DBID.
  I want to know how to change the cloned instance ID?.

  See these examples

  http://gavinsoorma.com/2009/07/change-dbid-of-database/
  http://docs.Oracle.com/CD/E11882_01/server.112/e22490/dbnewid.htm
  http://fugoconsulting.WordPress.com/2011/06/20/changing-dbid-in-Oracle-database/

• Change the name of the measure after the cube is built

  Hello
  
  Is it possible to change the name of the measure after a cube is built?
  
  Or is it possible to change the name of the measure in the view?

  Any measure not referred to in the XML fragment will be left intact. So no, you don't have to rename the other measures or even to list them.

• iPhone 6 requesting an unknown Apple ID after restoring with itunes

  Hello. Then my sister bought this iPhone unused 6: 6-7 months ago. It was working properly until she changed the password and forgot it, we had to restore the iPhone via itunes 6. After restoring it, however, now upon activation it asks one Apple that wasn't a set - up on the phone ID. I am really frustrated because Apple ID it, she is supposed to be the first and the only one that was linked to this phone. But is not this user name. What is going on?

  She bought a phone that has not been released to find my iPhone. Only the person who configured iCloud on this phone can unlock. There is no way around that. See: disable find them my iPhone Activation Lock - Apple Support

• Create the REDO Logs after restoration of RMAN

  Version 11.2
  Platform: Solaris 10
  
  We restore the cold RMAN backup to a new server. It's a basic restore RMAN where DB name remains the same.
  
  I understand that RMAN backup online redo logs, and for good reason.
  
  We have restored our datafiles successfully. The control file still has the old entries so the query below shows old information about recovery logs
  
  -Display of the configuration of the log file the old control file data

  SYS > select * from v$logfile;         ------------> The below output shows the result of the source server
  
      GROUP# STATUS  TYPE    MEMBER                              IS_
  ---------- ------- ------- ----------------------------------- ---
           1         ONLINE  /DATAM/DB/oradata/slmps/redo1.log      NO
           2         ONLINE  /DATAM/DB/oradata/slmps/redo2.log      NO
           3         ONLINE  /DATAM/DB/oradata/slmps/redo3.log      NO

  I have to use ALTER DATABASE RENAME FILE command as below to update the control file.

  alter database rename file '/DATAM/DB/oradata/slmps/redo1.log' to '/data/oradata/slmps/slmps_log01.dbf' ;
  alter database rename file '/DATAM/DB/oradata/slmps/redo2.log' to '/data/oradata/slmps/slmps_log02.dbf' ;
  alter database rename file '/DATAM/DB/oradata/slmps/redo3.log' to '/data/oradata/slmps/slmps_log03.dbf' ;  

  Currently, in the new server, at the level of the BONE there is no physical file above to
  

  /data/oradata/slmps

  I need to create physically redo new logs using the command or the command ALTER DATABASE RENAME above key create a physical file at the level of the BONE?

  Salvation in spiral,

  Surely, RMAN will search for redo logs when RECOVER is issued.

  When you issue the command RECOVER after restore, RMAN does not check online redo logs. During RECOVERY, RMAN will try to apply the archivelogs or incremental L1 if it has been saved on the source server. RMAN Backup restorations online redo logs or never.

  Here OP tries to restore the backup from the cold to a new server. In this case the RECOVER command is not necessary. The example of the Oracle doc you mentioned should do a restore, recovery of a backup hot. In this case, during the RESTORATION, RMAN will try to apply archivelogs or L1 of the incremental backups.

  In both cases (cold backup restore or restore, recover from Hot Backup), it is the

  alter database open resetlogs
  

  command that will create the online redo log, so it is absent in the location specified by the control file. Because it is a restoration to a new server, recovery logs is missing because it has not been restored (because it has not been saved)

• ORA-01103: name of database 'Soqs2' in the control file is not ' tests1...

  Hello, please help me on this... im using 10.2.0.4.0, DB created by ex-colleague
  
  When the db connection has ora error 1103 and tried to create controlfile using track, but I could not
  
  Here are the details:
  
  Tests1 > bootable media.
  ORACLE instance started.
  
  Total System Global Area 734003200 bytes
  Bytes of size 2141536 fixed
  328159904 variable size bytes
  369098752 of database buffers bytes
  Redo buffers 34603008 bytes
  ORA-01103: "Used2" database name in the control file is not "Tests1.
  
  you want save ctl file and changing the dbname, get error below...
  
  Tests1 > alter database backup controlfile to trace;
  ALTER database backup controlfile to trace
  *
  ERROR on line 1:
  ORA-01507: database not mounted
  
  TESTING1:/app/Oracle/TESTING1/product/10.2.0.4/DBS > grep db_name initTESTING1.ora
  * .db_name = "Gel1.
  
  I found used2 entered into the alert log file...
  
  Tests1: / app/oracle/tests1/admin/bdump > grep used2 alert_TESTING1.log
  DBNAME will change to the new DBNAME of used2 tests1
  Name of database used2.
  ID of the database for the database used2 changed in 1933958893.
  
  I tried to create new controlfile and tried to start... got under error so I hv mentioned even path of the data files...
  ORA-01161: name of database used2 in the file header does not match name tests1

  This is the first law of holes.

  When you are in a hole, the first thing you can do is STOP digging.

  Did you take a full backup, the cold since the event started?

  DBNAME will change to the new DBNAME of used2 tests1

  When & why this has happened?

  You have a valid & recent backup?

  I tried to create new controlfile

  Why did you do this?

  Edited by: sb92075 may 7, 2010 20:36

• Imported contacts have SMTP with the name of the recipient after the email address and cannot be sent.

  I imported my contacts from Outlook, from a CSV file. In the e-mail section, I get the name, sometimes with "and after the email address, I get SMTP and the email again. Of course, it cannot be sent. What I have to go through all my addresses and change each of them, or is there a better way?
  Example: My e-mail address appears as follows: [email protected] SMTP Hoogeveen,.
  In some I get quotes here and there, or.

  I would suggest to edit the CSV file and import again. Much easier than the use of the address book to do. Have a look herewhere I discuss editing CSV in a spreadsheet.

• Weird Time Machine question after restoration

  Hi all

  First post here so go easy on me

  I'll try and make this as brief as possible.

  I've been running an iMac 27 "2010 end (still running Lion 10.7.5, but it is stable so I have not found the need to modernize) and NAS from Synology DS212j with TB 2 * 3 disks for the last 3 years. I've set up time service Machine through DSM on the Synology with a quota of 1 200 GB for my iMac which worked perfectly while all the time, during which I restored the weird file without problem.

  Recently, for a number of reasons, I felt the need to update the OS of El Capitan to provide specific features that only there, so I made sure that my last backup was not serious and went through the upgrade process. It took a while but seems fine, but in the end, I became artifacts of the screen during the exchange between the office computers and for the worse, completely locked Mail machine as soon as you have clicked on an email. A lot of research on Google and all the patches applied but no joy, I decided to restore Lion and watch a clean install of El Crappo thereafter.

  At through the process of full restoration without problem and he has restored from the DS212j without a single question (took about 14 hours but again, it worked) and my Mac was back as if nothing ever happened. Happy days!

  Shortly after that, although the problem started with Time Machine backups do not tell me that there is not enough space on the destination to save my machine...

  1. I look into my quota on the NAS (the bit you set to ensure that backups are not the entire disk) and it tells me that there are 820 used GB which I guess is my backups Time Machine original that nothing should have changed on the NAS.

  2. I don't seem to be able to see the Time Capsule shared queue Station disk even after display in shared folders, it should he appear?

  3. I unhid it and he could ride through cmd & k and using smb / / nom_lecteur/Time Capsule so I can now see the volume in the Finder.

  4. I can see there are 2 * sparsebundle files, one for my iMac and the other for Macbook Air my wife. The file for mine displays a last updated date/time of a few minutes ago, but no size of file. The woman shows well, last time/date and file size (he stayed very well throughout this btw).

  5. when I enter Time Machine on the iMac all my historical incremental backups have disappeared and the only backup who shows also available is the date to which I restored from, nothing before and obviously nothing after because there is no space.

  I have not a clue what going on here, but it seems to me like it after restoring my sparsebundle file (which is always on the NAS and must be intact) is there, but for some reason the iMac cannot see/index / register or see one of the backups that are contained in.

  Apple support tried to help but actually said that they don't support anything other than an official time Capsule and Synology must implement the Time Machine in a different way because he could not find the sparesebundle file, only the tf volume content when it is mounted by trying to start the backup.  From what I read and checked the forums of Synology and the sheets, they don't do anything outside the norm with regard to the Time Machine application, it's literally just a network volume that stores the sparesebundle in the same Apple so designed, then why on Earth after restoring my iMac do not see the content of this sparsebundle file , and why it consumes disk space?

  So, what I'm looking for help, is this (or questions):

  A. How do I look inside the time Capsule (this is what I call the Time Machine shared disk) to see how many files is there and if there is a GB 820 that contains all the data from my legacy?

  B. someone at - it an idea how the iMac see and recognize the original file should be here?

  C. If I were to remove the rare bundle that I peut see, will that potentially be old and will be that free space that is held open and allow me to perform a full backup from scratch?

  D. If C is not the original file remains hidden, no idea how I can find...?

  E. do I have other options that you can think of...?

  Sorry, that was supposed to be brief, but I wanted to make sure I had all the info there to allow people to understand what has happened and what I did to try to resolve so far.

  Thanks in advance

  See you soon

  Mark

  Mark, in my opinion, your questions can be answered by the great Pondini http://pondini.org/TM/FAQ.html

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Restore files after restoring the image using Windows backup

  Running W7 pro 64-bit. Had the problems of virus/malware, finally restored my discs from image system, dated 2 weeks ago and then restore backup files dated Windows from yesterday.

  When I go to save / restore my files, the update does not list a backup happened 2/14, the date of the restored image. When I go to manage Windows backup disk space, and then select backup period to remove the last date is 3/1, when I did the last backup. The date & time system is running with a date of 3/2.

  How can I fix it?

  Hello

  Thank you for visiting Microsoft Community.

  As I understood it, you experience the problem with changes to date during the restoration of files after restoring the image using Windows backup on the system.

  Certainly, I understand your concern.

  I suggest refer you to the articles below and check if that helps.

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7

  Restore files from a backup

  http://Windows.Microsoft.com/en-us/Windows/restore-files-backup#1TC=Windows-7

  Note: The article above will help you restore backed up version of the files that are lost, damaged, or changed accidentally. You can also restore files individual, groups of files, or all files that you have saved.

  Recovery and data backup

  https://msdn.Microsoft.com/en-us/library/bb727010.aspx?f=255&MSPPError=-2147217396

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Unable to start the virtual computer after restoring the backup

  Hello

  I have a very big problem! I have a Machine virtual Windows Server 2003 on a Mac Mini with Mac OS 10.6.8 2009 Sever Server and VMWare Fusion 4.1.1 and I had a record of crash! A backup is performed daily and I take snapshots of security risk.

  I changed the faulty HARD drive and restore "Mac Data. Now I want to restore my data from VM, but after that, I can't throw my VM. I have this error message: "Unable to get information on snapshots, lock down." (French translation, it can differ from original English message).

  I get on the internet and found that you must delete the snapshots and try again, but when I do this, I have this error message: "the VM seems to be used. The same thing when I want to create a new capture instant.

  I'm stuck and I have to solve that before Monday...

  Thanks in advance for the help.

  With the merger closed, open the package of vmwarevm of the VM (CTRL-click) and delete all the files and folders with a .lck extension. These files are used to lock the files logically and very probably contain stale data.

  BTW. do you really need > 20 shots? Too many clichés can slow down the virtual machine significantly.

  André