Similar Questions

• Change of Alias names in a plan

  Hi all

  Hoping you can help me with a question.

  I need to change the names of the members of alias in my default alias table. I was able to do by running an excerpt from plan (thanks metro OLAP), change the Alias names, then by using a rules file to load the changes again. Since I found an alternative that seems much more straight forward which is simply to export the Alias by using outline-> export a Table Aliasfile, make the changes to the .alt file and then using contour-> Table of Alias to import to load in the updated Alias names the. I just wanted to check if this alternative (and easier) approach is correct?

  I saved the outline on my desk, if I live, how I can better restore the outline?

  Appreciate any help,

  John

  It depends on the properties of Dimension Build.

  There are two options, called "Delete not specified" and "merge". You must be very careful. I always prefer to use Merge on the incremental updates that will only update the new changes / add new members. It does not remove members if you are using "merge". But, if you use 'Delete not specified', it will keep only the members in the file and removes the rest.

  Because of Parent, child, Alias

  When compared to the generation (or) level construction, construction of Parent-child is the easiest. (Ensure that you must "Allow change of ownership" enabled for this specific dimension for which you want to make changes)

  Concerning

  Amarnath

  ORACLE | Essbase

• Change of domain alias name

  so...  What is the point of alias of the device again?

  After you have created a few areas, I noticed in my VNX is not enumerate ports in the way I thought it would be.   Port 0 of the slot 2 SPA shows like "A-4", while I made an alias domain called "A2P0" then, I added "A4" at the end of the device alias (after activation of this feature in the settings of the web server).

  Well, he cautioned against a disruption of the VSAN, I didn't know that it's a big deal, as I have never done that one switch, but it turns out that everything in this switch is remained connected on the fabric, and I found that I had to reconfigure the zones to use the new device alias.  I thought that the whole point of device alias increased they can spread the everywhere and it would automatically update. They were not yet updated in areas.
  In my 5100 s Brocade, I could change fc alias throughout the day (if I were so inclined), it has never beaten the areas, just automatically updated with the new alias.  But they are not?

  based zoning pWWN is good practices by all providers of storage!

  What you see is the standard; changing the name of a device alias implies to change the zoning.

  Only if you change the attribute of a given device alias, for example changing pwwn, automatically update areas!

• strange alias name change in hierarchical planning after loaded ODI

  I have this name strange alias change in the scheme of planning.
  We did a load of member using ODI and it worked very well. A few days later, it seems one of alias names have disappeared, and I don't know how it happened.
  All users who have access say they has not changed anything in the outline.
  the only process I can think is the load of oDI. But according to our ODI, implemented may not remove all Member/alias names existing (at least I think he can't remove)
  We now have this alias among more than one name and we ran the same ODI work successfully many times previously.
  In the ODI source file, there is no alias name, but in the web of planning, we alias name manually updated a long time back.
  So if run us task ODI, we used to have the alias name, as ODI will remove all existing names (don't replace if there is a change)...
  users thought that there might be a space or something for the existing name may have been replaced by space...
  So I took the same copied file on test and ODI work ran and it has not changed the existing alias name. So now I'm really confused about the change of the alias name.
  Is there a way to track changes in the structure of planning, as in DRM where we can see the transaction history?
  Please advice.
  
  Thank you in advance.

  Unfortunately, you probably won't be able to find out now, you will need to make sure that you enable auditing for you back in the future.
  ODI will be just able to show the SQL and the number of records that have been loaded, if you use a transit area and do not delete the table from the staging area might there could be information loaded in it.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to change the domain name on the host target

  Hello!

  I need to spend a couple of machines in a new area.

  Is it possible to change the field to a GC host or what I need to remove and add?

  / R

  Unfortunately, there is no good way to change the host name.   You can change the display name with EMCLI change the target, but below would be inaccurate, because it would still be the old domain.   Can you create a DNS alias so that it can still be used with the old domain?   Otherwise, delete and rediscover is the only way that I can see.

  You can use this to remove and readd without reinstallation:

  http://docs.Oracle.com/CD/E24628_01/install.121/e24089/appdx_repoint_agent.htm#BABICJCE

  followed by

  emctl start agent

  emctl security officer

  emctl config agent addinternaltargets

• Change the column names in the Table of snapshot?

  Now when you create a snapshot - a table is created using names of columns like C_PRODUCT_MEMBER_CAPTION or C_MEASURES_MEASURE_NAME
  
  Is it possible to format these column names when creating the table?
  As a measure named "Expéditions" would create a name of column 'Deliveries' and not 'C_MEASURES_SHIPMENTS '.
  
  I am aware that MDX can Member alias names such as:
  
  WITH MEMBER [Measures]. [New name] [MEASURES]. [Really long name that I want to change]
  
  But it would not always remove the prefix "C_MEASURES_".
  
  Thank you
  John

  John,

  Don't believe it's possible - tables snapshot always end with the crazy column names. I my experience, the raw snapshot tables (almost) always need to be post-processed, which is where you'd of beautiful readable columns.

• TB change the sender name to my name to email classic. Fritz! Box send a pushmail with the name "Fritz!" Box '. In the Inbox of my ISP of this name is present. ...

  TB change the sender name to my name to email classic.
  Fritz! Box send a pushmail with the name of the sender "Fritz!" Box' to my standard email address.
  In the Inbox of my ISP of this name is present. Get this mail with TB the name "Fritz!" Box"is changed in lastname, firstname. This is the full name of my standard email address as I stated in my address book.

  In the toolbar > Options > view > advanced and turn off "see the show only the names of the people in my address book."

• How to change your user name?

  Is the only way to completely close your profile and start a new?

  Yes. On this forum, you can only change the full name and not the username.
  To change the user name, you would have to contact and administrator, but maybe there's no one around at the moment.
  Otherwise, you will need to delete your account via your user profile page and create a new account with the desired name.

• How can I change my last name?

  How can I change my last name from my apple ID and also for my user account on my laptop (Administrator).

  You can change the associated name to your identifier Apple by logging in to https://appleid.apple.com/ and then click on edit counts to the right of the section.

• the column 'from' on my mail has changed all the names being a sender

  I get messages from PayPal payment everytime someone pays me. The problem is on one of my email accounts that include all messages from PayPal for payments received from them. Everyone who sent me a payment last week all have the column with name changed to one name instead of that the message was in fact. The column now has only one customer name in it.

  For example:

  The original message in the column used to say "John doe via Pay Pal"... Now all the messages in the column now say 'jane doe via Pay Pal' when they said originally from john doe. All payments that have been received before and after this specific one payment now all read 'jane doe via Pay Pal' and NOT what they initially said in the column.

  I checked with my webmail provided and verified that the e-mail server and e-mail messages are properly formatted on the webmail with the sender correctly displayed in the column. It seems that the problem lies between the web and where it appears in Thunderbird.

  Help, please!

  Go to your address book and find the entrance to PayPal. Delete the name of this contact. It displays the name of the person where you first saved the contact. No doubt when you have selected to always display content from this sender.

• Can I change my user name to communities of Apple Support in 2016?

  Can I change my user name to communities of Apple Support in may 2016?

  No, only hosts can potentially change an id here - they do usually only for reasons such as privacy

• Impossible to change the display name - Bug?

  For the last few weeks, I was able to change my display name. I currently have an invisible name. When I try to click where my name would be to change it, there is nothing there to click. It's for Skype Desktop, I tried on the Skype web and mobile application to change my name, but nothing works.

  Any help is appreciated.

  See you soon

  HS

  Hello

  You can modify you profile - first name and last name that make up your display name in the customers - in my account. Simply log in with your credentials of Skype and go to "Edit profile." Here's a guide: https://support.skype.com/en/faq/FA12314/how-do-i-update-my-skype-profile-information

• My macbook since a former apple ID, then I changed my name and my iphone has the new id apple - how can I change apple id name my macbook to match my iphone for home sharing?

  My macbook since a former apple ID, then I changed my name and my iphone has the new id apple - how can I change apple id name my macbook to match my iphone for home sharing?

  Thank you

  Cindy

  Welcome to the Apple community.

  You need to disconnect your old ID in System Preferences > iCloud > sign out and then sign in with your new code.

  You will also need to do this for iTunes, App Store, Messages, FaceTime, and books.

  To change your sharing settings go to iTunes > file > Colocation.

• How to change a file name in the Photos? (no title)

  I know how to change the title of a photo in the Photos.  But I do not see how you change a file name.  Can anyone help?

  Photos will not change an imported file.  The original master image file is preserved. You can't even change the file name.

  To change the name of the file, export the Photos photo: file > export, and then specify a different file name in the export Panel.

  Re-import the renamed picture, then delete the first version you imported.

• Cannot change the user name of the forum

  If you go to the user control panel, under the profile box, there is a place where we can make our forum user name - which would be nice because this stuff USER-xyz is ridiculous.

  Unfortunately, it does not work because you must put a valid e-mail address in order to change your user name... but you can't because it lacks the text box that you are supposed to type in the e-mail address field.

  Can a mod contact someone who can take a look at this?

  I too have this problem. I really wish that Sony would like to address this forum some to make it easier to use.