Change of LabVIEW VeriStand system definition

Similar Questions

• VeriStand system definition file

  Greetings! I'm trying to customize the sysytem Veristand definition file. In the definition file system when adding simulation models, we have an absolute path to the dll. Is there a way by which I can change to accept the absolute paths. Also, I want to know is there any VI in the background (runtime) during execution of the screen to add the simulation model? If yes where he resides.

  If I look in the XML of the system definition file, which shows an absolute path to templates

  Property Name = "Path of the DLL" >
           

  Can I change this? How can I implement a relative path here?

  You always specify the absolute path to the model in this configuration dialog box. However, when you save the system definition, if the path of the DLL model is compared to any known location (the system definition file, the public documents folder, etc.), it will be saved in the system compared to those places definition file.

• Deploy on top of running Veristand system definition

  I managed to deploy a definition of a RT PXI system.  I then closed the workspace but not a not cancel the deployment.  The definition of system continued to run on the PXI system.  I have changed since my definition of the system and would like to deploy this new file.  However, I can't figure out how to stop the currently running system definition file to enable this.

  Thank you

  Marty

  You have a few easy options to do so:

  Run the project: you can run a project in the window started to get or by clicking on the run button in the toolbar when you configure the project. Run first will try to connect to targets in the system definition without deploying. If the targets are already running with the same version of system definition, then the project will connect everything simply. However, if the objectives not running a system definition, run a different system definition or run a different version of the system definition, then the project stop targets and force deploy its version before connecting. In your case, because you updated the definition of system on the host computer, the project will stop the target and deploy this version on the top automatically for you.

  Deploy the project: you can deploy a project by clicking on configure to open it and then clicking the button deploy in the toolbar. This will force deploy the project on the overall objectives of the RT in the system definition, which makes them first establish some definition of the system they were running before.

  In summary, virtually the only option you don't want to try is to Connect, which, unlike an option the deploy, don't try to connect to a target executes the same system definition and never deploy or stop this project.

• Type of change VeriStand system channel

  Hello

  I've developed a VeriStand project and I was wondering if anyone has any ideas on how I can change the types of channels in the system of double uint32, or uint64. I see that there is a .net NationalInstruments.VeriStand.Data object that has the classes I want, but I'm not very familiar with the .net api or how to create definitions for VeriStand system in LabView.

  I thought I could create a project, import my models and then use the .net API to get the system of channels and change their type. The problem is that using the GetSystemChannels does not give a method to allow this.

  I got the VI somewhere on NEITHER, but I can't remember where.

  Thanks in advance,

  Brent

  Why do you need the channels of the system as the variants?  When you use?

  You cannot change the type of the system channels in VeriStand.  VeriStand is double.  Period.  No exception.

  However, in LabVIEW, you can easily convert a doulbe U32 or I32, almost any other type of data or elsewhere.  Just use the screw of the digital palette converstion.

• departure fom LabVIEW VeriStand

  Hey guys,.

  I installed VeriStand a few days ago and now I would like to connect LabVIEW and VeriStand.

  I already explored how to run a profile of stimulus in an open VeriStand workspace to a LabVIEW VI.

  Now I would like to open & run the workspace (like the 'performance' - button in the window of road VeriStand project is).

  Does anyone know how to do?

  I joined my current state, but I guess that I do not use the right screws.

  Frank

  There are a set of screws, you can use to do this. They are not on the palette, but you can find them in the NI VeriStand folder under vi.lib to \vi.lib\NI VeriStand\Execution\Project.

  There are screws to open a project, run it, open the workspace, etc.

  The screws you use only control the system definition, not the VeriStand project and workspace.

• Add 9188 Chassis to the system definition file (sdf)

  I want to measure the basic in Veristand 2011 without a custom device channels.  In the system definition file, how can I add a 9188 chassis? And how do I add a thermocouple on channel 0 on a series c 9213 module?  Thank you!

  Hello

  You work with a Windows or device in real time?

  If you use VeriStand able to work with a Windows-based system, the addition of a cDAQ-9188 should not be a problem; the equipment Discovery Wizard he will come if it's in the same network as the Windows computer. Having problems with this?

  If you have a real-time like a Pharlap ETS PXI controller running target, you will not be able to use the cDAQ-9188 at all because it is not supported in real-time operating systems. If you work with a target in real time and you need the CompactDAQ you either move to Windows or we a USB CompactDAQ instead, like a cDAQ-9178.

  Please refer to this topic. The second post made by a Product Support Engineer and I was able to confirm that the information is still valid even for the latest versions of NOR-DAQmx and VeriStand. You can also check the compatibility in real-time in the Readme of NOR-DAQmx 15.5.

  Kind regards

• How can I change several download Sierra systems

  How can I change several download Sierra systems?  I have a Mac mini end of 2012 running El Capitan, over a mid-2010 Mac mini and MacBook Pro mid-2010 the two race Yosemite with limit of bandwidth on my internet connection and want to update all three systems in one download.  Is the process that apply with Yosemite and El Capitan (ie. Copy the Setup program to another location before you run it on the download system) still the way forward?  Thank you.

  You can do this or DiskMaker X allows to create a key to install it.

  (145170)

• LabVIEW Communications System Design Suite with 10 64-bit Windows

  I would like to know is possible to run LabVIEW Communications System Design Suite on Windows 64-bit 10. According to the Web site of NOR, he says that he only supports 64-bit Windows 7. So is it possible to run it on Windows 64-bit 10.

  Please guide.

  Thanks in advance.

  Hi josephkirmani,

  Currently LabVIEW Communications System Design Suite is not supported on Windows 10-64 bit. You may be able to make it work on your machine, but unfortunately it is not officially supported outside of Windows 7-64 bit.

  BeenCoughin

• use IMAQdx functions in Labview Communications System Design Suite

  Hello

  I would like to read an image and use the bytes obtained to perform certain functions. Currently, the system has Labview Communications System Design Suite (2014 SP1)

  and vision acquisition software installed. I don't know how to use IMAQdx features in labview.  Can anyone help?

  Thank you!

  I do not work with the Design Suite of Labview Communications System.

  In LAbVIEW, however, when after you install LabVIEW first, then the Vision Acquisition, you can use the example Finder locate IMAQ or IMAQdx for LabVIEW examples: in LabVIEW, select help > find examples. This will open the Finder of the example. On the "Search" page, type the keyword "IMAQ" or "IMAQdx" (depending on your device) and look at the examples that come with the Acquisition of the Vision for LabVIEW.

• I'm trying to upgrade from windows vista to windows 7. whenever I start the upgrade, that he told me that count it needs to restart to allow changes to the file system.

  I'm trying to upgrade from windows vista to windows 7. whenever I start the upgrade, that he told me that count it needs to restart to allow changes to the file system. I restarted several times now and get the same message. What should I do to ensure that this computer can be upgraded?

  Hello

  Run the windows Upgrade Advisor 7

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  and repost in the windows forums OK 7

  Here is the vista forums

  Windows 7 forums on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Page Setup changes to the metric system

  In the "Page Setup" from my wordprocessing program box, all dimesions were changed to the metric system today. Instead of margins or 1 ", for example, they are now 25 mm. I have Windows 7 Professional with Microsoft Works and have not been able to discover a undue this mysterious and unwanted change. Any thoughts would be appreciated. Thank you

  Thanks - I have so many goofy things to change this new laptop Dell & Windows 7 I never even looked there. Duh. I have still no idea how he spent inch in millimeters by itself, but your idea worked. Hope it lasts. Thanks again.

• Date and time system continues to change each time the system starts.

  I noticed that the time and date of my home PC gets changed every time the system is booted. The default date is set for Jan. 2008, when in fact it should be July 2014.

  Also, my PC became slow death. I use Windows 7 on 1 GB of RAM, 250 GB PC. I used last my home PC 2 years back, but there has always been someone to use it.

  It shows the OS disk to 7 GB of free, when in fact I never installed or anything unnecessary stored on the disk of BONE; Whatever unnecessary programs were there, I uninstalled them recently, keeping just a few essential ones. After uninstalling, it shows to 7 GB of free, when in fact it should be more than that.

  I use Avast anti-virus, which I think is unnecessary, that its not to protect my PC and as other programs, too, is quite dead slow.

  The system is infected by viruses? Manually, I checked the system for viruses and clean the system of all unnecessary and, program files, but I'm still not sure whether it is a virus or a PC problem.

  I am a COMPUTER analyst, and's just done it 2 days that I use my PC at home. I could format my PC, or where applicable be buy Windows 8 with a new processor.

  Please advise.

  Thank you and best regards,

  Ralph Davidson.

  Hello

  You really need a minimum of at least 2GBs of RAM to run Windows 7 well enough.

  As you have only 1 GB of RAM, which seems to be one of the reasons why it is slow.

  Increase the physical RAM or try ReadyBoost:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  Looks like you have some problems.

  Wrong Date/time

  If after you set the Date and time, and then stop and restart your machine and the time returns to the year 2008, and she did this whenever you reset, then restart the PC you have a CMOS battery has failed in the motherboard.

  They cost about $5 and are easy to replace.

  How to replace a CMOS battery.

  http://www.computerhope.com/issues/ch000239.htm

  ________________________________

  For hard disk space:

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  And for general maintenance on your machine:

  You should have used Malwarebytes in previous advice here on hard drive

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary make mode safe mode with networking: AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  @@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• change the ucs FI system name

  Is it possible to change the name of system already deployed on a pair of 6248up fi cluster? Firmware is 2.2 3B...

  Thank you

  You can also go to the Admin tab > Communication Management (in the filter/menu drop-down) > Management Interfaces > "Virtual IP address" field and then change the "domain name" which is the third line from bottom to top

  -Kenny

• How to change the location of system restore

  Hi, I can't understand WHERE W8 stores the System Restore Points that I create, so I created a 500 GB Partition on a disk external DRIVE that I would like to use to save files to the system restore and my question is WHERE in W8 can I CHANGE the location of system restore?
  Thank you for your help,
  Bob

  Thank you guys, so I'm stuck with having food on my 'C' drive
  Now I have to find a way to DEVELOP (increase in size) if the 'C' Drive to accommodate the pints of restore (I think they take a LOT of space).
  Thanks again for your help,
  Bob

  Hi Bob

  As Entegy said, you can set the maximum amount of space that system restore is allowed to use.

  The size of each Restore Point will depend on what has changed since the last restore point was created. Only the files that have changed will be saved in each restore point. Each restore point depends on the subsequent restore points.

  These restore points are also used when you select this option to restore a previous Version of a particular file or folder.

  You can also use the latest cleaning disc to remove all but restore point tool. This will immediately release a lot of disk space.

  Concerning

• I would like to know if the change in the operating system will also change the product ID

  Original title: change of the operating system

  Hello

  I would like to know if the change in the operating system will also change the product ID.

  Please can you me this.

  Hi Agnes,.

  Thanks for posting the request in Microsoft Community Forums.

  1. are you referring to the product key or Product ID?

  2. you try to upgrade to Windows 8.1 with the same product key?

  Product ID is built into the hardware of the machine components. The product key is a 25 character alphanumeric code shown in five groups of five characters each (for example, BCDFG-12345-HJKLM-67890-NPQRS). When you change the operating system, product ID remains the same and not need to change.

  You can reuse the product key in the file product ID for multiple installations of the same version of the operating system. The product key in the product ID file is only used to install Windows.

  The edition of Windows that you are installing must match the product key used to activate Windows. If you use a product key to select a Windows edition, we recommend using the same key to activate Windows, so that the edition you are installing is the same as the edition that you select.

  Work with the keys and product activation

  http://TechNet.Microsoft.com/en-us/library/hh825195.aspx

  Hope this information helps.