Report of WGA problem

Similar Questions

• Why not a problem in iTunes only allows you to report a 2 problem?

  Why ITunes reported that a problem with the purchases you to only report a problem only 2?  I ordered 4 episodes on television and got 4 wrong.  Could report only 2.  Then had to go to Apple Support for asking again.

  You need to ask why Apple, we are fellow users on these forums.

• How to report the BIOS problem?

  Hello

  is it possible to report the BIOS problem so that a person of HP it will read and the problem will be solved if all goes well?

  To be concrete, there seems to be problem in BIOS F.02 installed on HP Mini 5103 causes of freeze if it has plugged the USB key with 'recursive partitioning' at startup. As a result, it is not possible to boot from live USB which was created from some ISO hybrids (e.g. direct ISOs of OpenSUSE recent). Since there are not many options to install the system on netbook, I think it is serious problem. My previous netbook Lenovo Ideapad S10 - 3 and also my work laptop and desktop have no problem to start with the USB stick containing "recursive partitioning", so it's certainly a problem (hopefully not feature) this concrete machine/BIOS.

  Thank you

  That's ok on the Bravo, I did nothing to help you again.  This link is for questions of security, but it is also for the firmware, so you can get away with sending them a note here:

  https://h41268.www4.HP.com/live/index.aspx?QID=11503

  - Or call them.

  http://welcome.HP.com/country/us/en/contact/phone_assist.html#section1

• Firefox 18 and reported Windows 7 problems

  I have recently reported problems with Windows 7 patches who were charged on my Dell laptop, as well as of an automatic update of Firefox on 10 Jan.

  After restarting my system several times, Firefox works fine.

• Report Word formatting problems

  Hello

  I have two problems with the format of Word document automatically created in LabVIEW using the palette of report generation (specific Word).

  1.
  There are added additional lines between each section made by Easy Text.vi Word.

  2.
  I want to insert a table without border lines. However when I set borders and shading in a way this table without any boundaries should generated vertical border remain lines between the columns of the table.

  Any help will be greatly appreciated.

  Best regards.

  Martin

  mavlc wrote:

  Hello

  I have two problems with the format of Word document automatically created in LabVIEW using the palette of report generation (specific Word).

  1.
  There are added additional lines between each section made by Easy Text.vi Word.

  2.
  I want to insert a table without border lines. However when I set borders and shading in a way this table without any boundaries should generated vertical border remain lines between the columns of the table.

  Any help will be greatly appreciated.

  Best regards.

  Martin

  2. I want to insert a table without border lines. However when I set borders and shading in a way this table without any boundaries should generated vertical border remain lines between the columns of the table.

  Set the entry AutoFormat in Word Input.vi easy to 0 will create a table without the internal lines, but that doesn't solve your problem #1.

  1. There are added additional lines between each section made by Easy Text.vi Word.

  These additional lines are added by the easy text and the easy Table.vi Word. If you don't want them using these screws. use the report text Append and Append table of the report live as in the following photo. (you then need to set the style using Word Format Text.vi as I did for the title).

  Ben64

  

• Multiple reporting of test problems in TestStand 4.1.1

  We lack TestStand 4.1.1 and LabVIEW 8.6.1.  We have a vast repository of production and test fixtures, with lots of code-sharing and others.  We build installers for all of our tests and deployments every night with a build server automated.  We have newer versions of the TestStand, LabVIEW, but due to process bugs in TestStand deployment (and installer of construction), we can use them with our footage/projects/workspaces.

  We have traditionally been configured to test as html reports, because it is easy to visualize the reports not only on the test set-up, but on any other platform.  The problem is that the html reports are difficult to analyze programmatically.  To do this, you really want the report xml format.  The problem is that the xml reports require a style sheet, and the viewer only, we have learned to work is Internet Explorer.  It's not very portable, especially on platforms.

  So we got the mandate to produce test reports in both formats.  I found a thread here describing how in TestStand 3.5.1 and started with the model of update sequence posted in this thread.

  http://forums.NI.com/T5/NI-TestStand/create-two-TS3-5-reports-XML-and-ATML/TD-p/471394/page/2

  I need to edit the SequenceModel file, and some mods are also required in the ModelSupport.seq file.  I don't want to change the default settings, so I make copies of the files and specify that my sequences use modified versions.  Thus, the process I use so far goes like this:

  . Copy the file

  C:\Program NIUninstaller Instruments\TestStand 4.1.1\Components\Models\TestStandModels\ModelSupport.seq

  TO

  C:\MyWorkingDirectory\ModelSupport_multiReport.SEQ

  . Download SequentialModel.seq from this thread
  http://forums.NI.com/T5/NI-TestStand/create-two-TS3-5-reports-XML-and-ATML/m-p/471394

  . Copy the file to
  C:\MyWorkingDirectory\SequentialModel_multiReport.SEQ

  . Open the sequence above in the sequence editor
  . under the following subsequences, there the integrated sequence called ModelSupport.seq sequence request.  You must redidrect these calls to use
  C:\MyWorkingDirectory\SequentialModel_multiReport.SEQ

  . sequence calls that may be needed are found in
  Test DUT
            
  Simple pass
  Configure the report Options (call to the "Configuration of Report Options")
  Configure the Options of SecondReport (call in the "Configuration of Report Options")

  . create the directory
  C:\Program NIUninstaller Instruments\TestStand 4.1.1\Cfg\SecondReportDetails
   
  . Note that the "Cfg" directory is a shortcut to
  C:\Documents and Settings\All Users\Application Data\National Instruments\TestStand 4.1.1\Cfg\

  . in SequentialModel_multireport.seq, find references to
  "C:\\Program Files\\National Instruments\\TestStand 3.5\\Cfg\\SecondReportDetails"

  and change them to

  "C:\\Documents and Settings\\All Users\\Application Data\\National Instruments\\TestStand 4.1.1\\Cfg\\SecondReportDetails"

  . There are several references
  . Test the DUT-> Get 2 Report Options
  . Single pass-> get 2nd Report Options
  . Configure the Options of second report-> Edit Report Options

  . After making the changes, check in your main sequence
  . Configure-> second report Options
  If the configuration window starts, all is ok so far.

  . Change the sequence file to require different model
  . Change-> sequence file properties, Advanced tab
  . Model-> specific model required
  . Go to the
  C:\MyWorkingDirectory\SequentialModel_multiReport.SEQ
  . Ok
      
  Finally, the problems:

  1. normally, when you run the sequence in "Test UUT" mode, when you stop (from the serial number prompt USE), the last test result appears in a pane view in sequence or the test Executive Editor, who ever you happen to use.  This causes a "TempReport.html" file to be generated in the reports directory, and normally, this file is deleted when reject you the report viewer.  This deletion occurs is no longer, and the directory will start to accumulate files "TempReport_0002.html," "TempReport_0003.html".  It is not desirable.  I went looking through the template and related files, but could not find where the temporary file is created or deleted, nor I could find where the viewer within the sequence editor is called.

  2. If the first report is html and the second is in xml format, the resulting xml file can no longer be read or in the sequence of the other editor or test the view of the Executive or in Internet Explorer pane.  The message in IE is:

  The XML page cannot be displayed

  Cannot view XML input using XSL style sheet. Fix the error and then click the Refresh button, or try again later.

  Error running Microsoft JScript 'null' is null or not a subject line = 381, col = 3 (line is offset from the beginning of the sc...

  I checked, and there is nothing unique or commonplace online 381.  Column 3 is a space, and the rest of the line contains data used elsewhere and only some ordinary tags.  If the order of the reports is enabled, the xml report is visible in the view report sequence editor and through Internet Explorer.  (In other words, do the first report of the xml file and the second the file html.)  Now, I know what you think.  "Doc, does it hurt when I do this.'" " Well, don't do that! "If it works one way and not the other, use the way that works.  My concern, however, is why the resulting xml data files differ?  If I let this slide, it will come back as a big issue later, after that the memory of how I created this so is cooler?

  3. If I pull up to configure-> Options pane of report in the sequence editor, finish, so don't wait several seconds before pulling up to configure-> second report Options, the editor of sequences often disappears from the desktop.  A few seconds later, I get that annoying dialog box 'Do you want to tell Microsoft about the problem?' that appears when a program crashes and dies.

  If anyone has come across this, or how to fix it?  Thank you.

  M

  Hello

  I was not able to get the files that you use to work, but I found a model of different sequence on our DevZone page that works for me, trying to create two different reports.  It can be found here:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/3278

  As it says in the instructions, simply change the local variable called 'DisplayedReportFormat' in the file tworeportssequentialv30.seq on "html" or "xml" to change the output type of the second report.  The first type of report is normally configured via the menu.  Also, be sure to change the options of station to use this model.  I have confirmed that it works and that the temporary file is also deleted every time.  I hope this helps!

• change report of transformer problem convergence

  The attached circuit simulates until I have change the number of revolutions in coil1 from 10 to 5. Why the ration of turns would cause a problem?

  My guess is that it is rooted in your placing the primary winding in parallel, which requires careful consideration.

  In general, I believe that the relationship between the parallel windings must be 1 (otherwise you will have huge currents, limited only by the internal coil resistance). That's probably what you are trying to do by specifying the towers 5 and 5. However, now it is becoming a matter of simulation as the Simulator effectively see two sources of tension in parallel. Even if power sources have the same value, the Simulator can unfortunately deal with this scenario and error reports of singular matrix (see the error log)

  The best way to handle this is simply resistance from small series for the coils. In any case, it would be a reasonable feature for any practical transformer. This can be done outside or tab of the resistance in the transformer.

  Hope that helps.

• OfficeJet 6600 - reports HP Connect "problem with the printer.

  I just bought an all-in-one OfficeJet 6600 and immediately installed on my MacBook Pro. Installation went smoothly, and I used it for scanning and printing. I am very happy. However, I noticed that HP Connect reports "Issue with printer." Well, it worked fine, so I ignored the error and continued to work.

  Tonight, I have installed the printer on a Windows 7 laptop. At HP Connect, it is always now reports "Problem with printer." That's it - no further details and no symptoms of any kind of problem. How to diagnose the 'problem' and how to fix it?

  Hi there, I know this may seem illogical, but I wouldn't worry too much about the problem with the printer State message in connected HP. I saw myself sometimes, and I was able to print successfully from a mobile device to the printer which connected HP indicated that there is a problem. Have you tried to send a job by using either the application mobile ePrint or to the e-mail address of printers for the printer in question?

  On the Windows 7 machine, you can also download and run the HP print and Scan Doctor to confirm there is no problem with the connection to the computer on which is installed the software of the printer or the printer hardware. Be aware, however, that the application is compatible with the Windows operating system only, so you cannot run it on the Mac computer, but unless you are having problems printing from Mac to the printer, there is no reason to suspect that anything is wrong.

  Hope that makes sense, but post comes back with other questions.

  Best.

• reports on the problems and solutions has stopped working message all the time

  I can't access the control panel reports of problems and solutions and constantly get one - problem reports and solutions has stopped working, message on the screen.

  How can I disable or fix this problem.

  Hi NickMeyer,

  1. have you made a recent software or hardware changes to the system?

  You can check if there is information in Event Viewer which may help us to solve the problem:

  What are the information contained in the logs of the event (Event Viewer)?

  You can also temporarily disable the security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

• Need help with report of WGA

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - X92GV - V7DCV-P4K27
  The Windows Product Key hash: aU2z1/fnhnLHmhBm699qYZT2E6s =
  Windows product ID: 00426-OEM-8992662-00400
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7600.2.00010100.0.0.001
  ID: {C21979F8-9DE4-4196-AEA9-31EEADF1ED72} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0 x 00000009
  Build lab: 7600.win7_rtm. 090713 1255
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

  Other data-->
  Office details: {C21979F8-9DE4-4196-AEA9-31EEADF1ED72}1.9.0027.06.1.7600.2.00010100.0.0.001x 64*-*-*-*-P4K2700426-OEM-8992662-00400S-1-5-21-4294333439-1165172299-1530055978AcerAspire E1-4702Phoenix Technologies Ltd. V2.04 20130918000000.000000 + 0005EB83607018400FE04090409Myanmar Standard Time(GMT+06:30)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00178-926-600400-02-1033-7600.0000-0442014
  Installation ID: 017050301373112651397904489563719854511975514796458574
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: P4K27
  License status: Notification
  Reason for the notification: 0xC004F057.
  Remaining Windows rearm count: 3
  Trust time: 29/03/2014 08:23:40

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Not registered - 0 x 80040154
  The admin service: not registered - 0 x 80040154
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: LgAAAAEAAQABAAEAAAABAAAAAwABAAEA6GH2ek48rndWmVrmMF/mhq4d7l + WYw is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC ACRSYS ACRPRDCT
  FACP ACRSYS ACRPRDCT
  HPET ACRSYS ACRPRDCT
  MCFG ACRSYS ACRPRDCT
  SSDT ACRSYS PtidDevc
  ASF!            ACRSYS ACRPRDCT
  WPBT ACRSYS ACRPRDCT
  FPDT ACRSYS ACRPRDCT
  SSDT ACRSYS PtidDevc
  SSDT ACRSYS PtidDevc
  UEFI ACRSYS ACRPRDCT
  UEFI ACRSYS ACRPRDCT
  POAT ACRSYS ACRPRDCT
  UEFI ACRSYS ACRPRDCT
  DBG2 ACRSYS ACRPRDCT

  Separated from this thread by Moderator:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-do-i-Chang-window-7-not-genuine-to-Windows7/4d89b6a1-0858-42B6-88b0-f55439dc3081#LastReply

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-*-X92GV-V7DCV-P4K27

  This product key is a well-known pirated product key.

  You need to buy and install a genuine version of Windows 7.

  Concerning

• Report XML output problem

  Hello
  I am trying to execute the XML (work order print report eAM) report this report had parameters (name work order / on behalf of the work order) that allow me to run more State control work.
  but when I chose for example parameters
  Parameters: Name (UF1) work order / / / name of the order (UF5) work
  It must be good work 5 printing

  but problem is work order 1 print output only when I use the XML model alone, even if it must print 5 work as input parameters but the models show that 1 out of work order ...

  If I remove the template and change the output format of text report output run successfully.

  Thank you

  Thanks Farhan. problem solved by added repeating group.

• The interactive report update and problem of Plugin JQuery

  Hello
  
  
  I have interactive report in my page. So I use the plugin jQuery context menu when user right click on a column he get an option to add, delete, update and another option.
  

  javascript pseude code for context menu
  $(function(){
       context_menu();
  });
  
  function context_menu(){
  
    $('.Col1').contextMenu();
  }

  Suppose the user selects Delete option. In this case jQuery popup appears and users enter data that are saved in the table by using the application process. After you use gReport.search ('SEARCH'), I refresh the page...
  
  Now the question - now when I right click on the column of my jQuery context menu does not work...
  
  
  Used workaround solution - I've added onmouseover = context_menu () function for the column... link and it works fine...
  
  
  Now my question is... whenever the user moves the mouse over the column, it will run function context_menu()... There will be no unwanted problem... or memory leak problem...
  
  Please advice...
  
  
  Thank you
  shijesh

  Hello

  Okay, that's good.
  But if you take this plugin to use to select the option group you also code of loan that trigger events on IR Ajax calls.

  Kind regards
  Jari

• Lookup field to the report area - small problem

  Hello guys!
  
  I have a report and a search box that is used to find a specific report column. Only I could get it to work using an instring function. However, in fact it should be an exact match. So when you enter "9"only the folder with ID 9 must be displayed.»
  The instring function logically returns all rows that have a 9 match.
  
  My problem is that nothing should be filtered if my Page-Item used for the statement of the chain and the number of input search is null.
  
  Is there a way with sql to return all the rows when normal: P8_POINTSEARCH is null?
  
  {code} select *)
  Select
  p.inv_pt_id_main as ptidm,
  p.inv_pt_id_main as p_bestand,
  p.inv_pt_id_main as p_schichtigkeit,
  p.inv_pt_id_main as p_entwicklung,
  p.inv_pt_id_main as p_verjueng,
  p.inv_pt_id_main as p_totholz,
  p.inv_pt_id_main as p_biotop,
  p.inv_pt_id_main as p_alter,
  p.inv_pt_id_main as p_beeintraechtigung,
  p.inv_pt_id_main as p_verjueng_aussen,
  p.inv_pt_id_main as p_seltene_ba,
  p.inv_pt_id_main as p_punkt,
  l.str_lebensraumtyp,
  p.str_gebiet_main as str_gebiet,
  p.str_lrt_main as str_lrt,
  l.str_kurzform_lrt,
  p.int_inv_pt_nr_main as punktnummer,
  p.int_be_main as bewertungseinheit,
  p.int_wg as wuchsgebiet,
  decode (int_status_sub, 1,' < img src = "#WORKSPACE_IMAGES #neu.png" > ', 2,' < img src = "#WORKSPACE_IMAGES #bearbeitet.png" > ', 3,' < img src = "#WORKSPACE_IMAGES #fertig.png" > ', 4,' < img src = "#WORKSPACE_IMAGES #unbrauchbar.png" > ', 5,' < img src = "#WORKSPACE_IMAGES #unklar.png" > ",)
  6, "< img src =" #WORKSPACE_IMAGES #Keine_Auswertung.png "(>') like bild,"
  i.str_status
  vt_punktdaten_join p,
  vt_tbl_status I,.
  vt_tbl_lebensraumtyp l
  where
  (p.int_status_sub = i.cnt_status) and
  (p.str_lrt_main = l.str_kurzform_lrt)
  and (p.cnt_gebiet =: p8_cnt_gebiet)
  and nvl(p.bool_show,0)! = 1) where)
  InStr (upper ("PUNKTNUMMER"), upper (nvl (: P8_POINTSEARCH, "PUNKTNUMMER"))) > 0
  ) {code}
  
  Otherwise, I tried to implement the query in pl/sql.
  However, I get an ORA-06550 error when you try to compile the following pl/sql code. Miserably, I can't find the error.
  Maybe you have an idea?
  
  {code} declare q varchar2 (4000);
  Start
  q: = ' select *)
  Select
  p.inv_pt_id_main as ptidm,
  p.inv_pt_id_main as p_bestand,
  p.inv_pt_id_main as p_schichtigkeit,
  p.inv_pt_id_main as p_entwicklung,
  p.inv_pt_id_main as p_verjueng,
  p.inv_pt_id_main as p_totholz,
  p.inv_pt_id_main as p_biotop,
  p.inv_pt_id_main as p_alter,
  p.inv_pt_id_main as p_beeintraechtigung,
  p.inv_pt_id_main as p_verjueng_aussen,
  p.inv_pt_id_main as p_seltene_ba,
  p.inv_pt_id_main as p_punkt,
  l.str_lebensraumtyp,
  p.str_gebiet_main as str_gebiet,
  p.str_lrt_main as str_lrt,
  l.str_kurzform_lrt,
  p.int_inv_pt_nr_main as punktnummer,
  p.int_be_main as bewertungseinheit,
  p.int_wg as wuchsgebiet,
  Decode (int_status_sub, 1, "< img src =" #WORKSPACE_IMAGES #neu.png ">", 2"< img src =" #WORKSPACE_IMAGES #bearbeitet.png ">", 3, "< img src =" #WORKSPACE_IMAGES #fertig.png ">", 4"< img src =" #WORKSPACE_IMAGES #unbrauchbar.png ">", 5, "< img src =" #WORKSPACE_IMAGES #unklar.png ">",)
  6, "< img src =" #WORKSPACE_IMAGES #Keine_Auswertung.png ">") such as bild,.
  i.str_status
  vt_punktdaten_join p,
  vt_tbl_status I,.
  vt_tbl_lebensraumtyp l
  where
  (p.int_status_sub = i.cnt_status) and
  (p.str_lrt_main = l.str_kurzform_lrt)
  and (p.cnt_gebiet =: p8_cnt_gebiet)
  and nvl(p.bool_show,0)! = 1)
  ' ;
  
  If: P8_POINTSEARCH is not null then
  q: q = |' where Punktnummer =: P8_POINTSEARCH';
  Another null.
  end if;
  
  Return to q;
  end; {code}
  
  
  Thanks for your comments!
  
  Brgds,
  
  SEB
  
  Edited by: skahlert the 19.07.2010 06:32

  This should give you what you need:

  SELECT *
    FROM (SELECT p.inv_pt_id_main AS ptidm, p.inv_pt_id_main AS p_bestand,
                 p.inv_pt_id_main AS p_schichtigkeit,
                 p.inv_pt_id_main AS p_entwicklung,
                 p.inv_pt_id_main AS p_verjueng, p.inv_pt_id_main AS p_totholz,
                 p.inv_pt_id_main AS p_biotop, p.inv_pt_id_main AS p_alter,
                 p.inv_pt_id_main AS p_beeintraechtigung,
                 p.inv_pt_id_main AS p_verjueng_aussen,
                 p.inv_pt_id_main AS p_seltene_ba, p.inv_pt_id_main AS p_punkt,
                 l.str_lebensraumtyp, p.str_gebiet_main AS str_gebiet,
                 p.str_lrt_main AS str_lrt, l.str_kurzform_lrt,
                 p.int_inv_pt_nr_main AS punktnummer,
                 p.int_be_main AS bewertungseinheit, p.int_wg AS wuchsgebiet,
                 DECODE
                    (int_status_sub,
                     1, '',
                     2, '',
                     3, '',
                     4, '',
                     5, '',
                     6, ''
                    ) AS bild,
                 i.str_status
            FROM vt_punktdaten_join p, vt_tbl_status i, vt_tbl_lebensraumtyp l
           WHERE (p.int_status_sub = i.cnt_status)
             AND (p.str_lrt_main = l.str_kurzform_lrt)
             AND (p.cnt_gebiet = :p8_cnt_gebiet)
             AND NVL (p.bool_show, 0) != 1)
   WHERE UPPER ("PUNKTNUMMER") = UPPER (NVL (:p8_pointsearch, "PUNKTNUMMER"))
  

  It returns all the lines if you do not enter anything and will match your entry if: p8_pointsearch is not NULL.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• I can't print anything from Firefox. There are many reports of this problem on the Internet, but no solutions.

  Standard print does not work-printer is unresponsive, if I create a PDF file is a blank document

  Hey Rzellner,

  Have you looked at the article Knowledge Base, solve the printing problems in Firefox? You may find your answer. I would suggest to reset all the print settings and start from scratch.

  Hope this helps!

• (this is the 2nd attempt) I have SP1 with first Home Ed. I have received no Windows Update since 11/11/09. I have no error reporting and no problem, I just get a response that my system is up to date.

  I changed my apartment av 11/5/09 and turned on Windows Defender because it was not find cookies to follow up on my system.  I also installed an add-on for Iex 8.0 two days ago that I must not turn on InPrivate browsing software each session.  I have run scans and run Mrt.exe and found without spyware or virus. I ran the event viewer, and there are problems, especially errors on start-up and shutdown delays and the fact that the security guard verification Center to see if I have an AV program installed.  But when I go into Security Center it tells me that my
  AV program is norton and my anti-spyware program is Norton and my system is all green lights.  Norton has found 40 + tracking cookies.  I have
  delete cookies in Internet Iexplorer, individually, but not on a large scale.
  That's all the news I can think are relevant-thanks in advance!

  Redshift905,
  If you know if you're missing the updates?  Usually if you run Windows Update and it says that your system is up to date so that means that he has not found the updates apply to your system.  If you think that you get the updates, then you can reset Windows Update components and test again.  Here is a link with instructions if you want to do.

  Reset the Windows Update components

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.