Change tabs left to right-tabs without too much trouble?

Similar Questions

• The following error is reported by the repository: cannot change demand. Repository is full. Too much metadata fields

  Dear all,

  Im getting "the following error is reported by the repository: cannot change demand." Repository is full. Too much metadata fields when I try to create, delete, and add more fields to an application.

  Please help me where to change configurations to create an application more in IPM.

  Thank you

  Jeff albert

  Hello

  Are you seriously having over 500 DEFINITIONS of FIELD Application of IPM? If so,.

  What you can do

  In the config.cfg to UCM (DomainHome/ucm/cs/config folder) can you add this in the general section:

  IpmMaxMetadataFields = 1000 (or any number you want to increase the)

  limit to)

  This will overrride the default max value in IPM.

  After this change, restart the managed server UCM and IPM.

  Please let me know the result.

  Note: I have a few performance problem in the future.

• Words back on display at the screen changed to left to right 2.

  I fixed a screen broken on Gateway Laptop w windows 7 only now words are backward, display spilled 2 left to right.

  Hello Refugio,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the number of full model of your computer laptop gateway?

  Thank you for details on the issue.

  This problem may occur because of corrupted display driver or incorrect display settings.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Get the best display on your monitor
  http://Windows.Microsoft.com/en-us/Windows/getting-best-display-monitor#getting-best-display-monitor=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• several tabs need too much memory

  When multiple tabs are open, the firebox uses 4-5 x more memory than before, slows all immediately, making it work with firefox a disaster.

  Hello, it would be useful that you could list your installed extensions. probably one of them interfere - you might try firefox running in safe mode once and see if high ram consumption there also occurs.

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• I have 2 related questions: code MX7 converts to CF11 without too much difficulty?  MX7 is compatible with Oracle 12 c?

  We are planning to migrate to CF11 MX7 and trying to determine how much effort it will take.  In the meantime, we currently use Oracle 10.2 but get pressure to migrate to Oracle 12 c before migrate us to CF11.  Is this possible?

  Thank you

  This all depends on the code. You could find no code must touch and everything works fine, you can find large parts need rewriting.

  A code will have depreciated since CF7 and used to work in CF11. Your best bet would be to install the first instance CF11 / dev edition and see what breaks. There is a feature in CF 11 Administrator called Code parser that checks your code and you say where there are problems.  Its not perfect but will give you a good idea of the obvious changes that must be accomplished.

  Oracle 12 c is supported only with CF11. You will have problems to make it work with CF7.

• How can you easily swap palette animations without too much duplicate symbols?

  This is to be exported in a film, so not a matter of Actionscript.

  I do a parody of a fighter game scenario.  A character like Subzero and the other as Scorpion.  They are the same models, but we need to be colored differently.  They are composed of symbols such as the arms and legs to make a greater animation of characters in all.  There are several animations of them, kicked, punched, shaky shots, etc.  Now, I know that if I went and edited the colors, that all instances would change accordingly.  Duplicate symbol does not work because they share the same internal symbols.  Is there a method for breeding "deep"?  I go about it the wrong way?  A tint does not work, because essentially, I want to just change the color of some components.

  create two torsos or copy the vest and neck movieclips to each character of movieclip (instead of using a shirtless movieclip to each character).  If you do the later, each character can have a color different vest/neck.

• My Pavillion M9452p hard drive has failed, without too much recovery.

  I have a HP Pavilion Elite M9452p.  I am running Vista Home Premium.  I got a Hitachi 1.5 TB drive failure and replaced it with a Seagate 1.5 TB drive, the system came originally with a 750 GB Seagate.  I ordered the long restore disc, as my system has been restoring a couple of times since the initial purchase of 2006.  HP Diagnostics show as being SUCCESSFUL, but the restore disc gets alnost at the end of the process and says it cannot complete.  Someone at - it an idea of what I can do to solve this problem.  My restore disks have been stored properly, it doesn't seem like scratches or other problems with them, it's a record three HP497331-001, Build ID:84NAvPrA1 (C) 2008.

  Help, please!

  Your recovery disks were created when your drive is 750 GB, SATA at 7200 RPM and must be at least that the use of the recovery disks.

• After v29 updated, the tabs that I left open constantly move left and right, no judgment.

  Everytime I open firefox, all the tabs I got on top, constantly moving from left to right, no stop. It only stop when any of the charges or recharge page.

  Start Firefox in Safe Mode to check if one of the extension (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extension+and+themes

• The functions of the left and right of my mouse buttons keep swapping without doing me anything, and it's really annoying!

  For some reason any the left and right buttons on my mouse keep turn on their own without me doing anything. Once this happens, I go into the properties of the mouse, apply the default and then that's fine. That lasts anywhere from 3 hours to 3 days. I don't know if it's a problem of Vista or my computer, but it's really annoying. I restarted my computer after changing the settings and it still does not help. Can someone help me with this?

  Hi regretfullybliss,

   

  Welcome to Microsoft Answers Forums.

  There could be conflicts with the key functions of mouse or a corruption with the mouse driver.

  I suggest you update to the latest mouse driver, you need to visit the Web site of the manufacturer of the mouse to the GET the latest drivers for the mouse.

  Updated a hardware driver that is not working properly

  http://windowshelp.Microsoft.com/Windows/en-us/help/b3c6477e-1111-4B9F-A52A-fffdc51e9c901033.mspx

  How to change the mouse settings.

  http://windowshelp.Microsoft.com/Windows/en-us/help/efd700f8-bbc0-4F04-9f78-3bdb4bbf47011033.mspx#EF

  There could be the possibility that some third-party program or service is in conflict with the key functions of the mouse.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Perform the check and the clean boot if you have the problem.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thank you, and in what concerns:

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to open a bookmark in a new tab without having to open a new tab first?

  Is there a way to directly open bookmarks in a new tab without first opening a tab, then opening the bookmark?

  Middle-click (press the mouse wheel), CTRL + left click, right click (and choose "Open in a new tab") will open a link or bookmark in a new tab.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox

• How to open new tab without leaving an old using the wheel mouse

  Until yesterday, I was able to click on a link using my wheel. It would open up a new tab without leaving the tab, in that I was. Now, when I click on the wheel, he left the former tab and going to the new. As if I had used my left button. I hope that I can return this option. It is very convenient.

  Hi Vicky, you can check the setting in Options to make sure that it is what you want:

  "3-bar" menu button (or tools) > Options > tabs

  Disable this box: "When I open a link in a new tab, switch to it immediately."

• Close the last tab without closing the application firefox

  Greetings!

  1.i would like to close the last tab without closing the application. The behavior I expect is the application to open a new empty tab when I close the last tab currently I can't close the last tab which already has some open site in it.

  2. when I open a new tab, I have to enter a Web site address. I expect the app to just open a new empty tab and let him to enter an address or not for me.

  Thank you for your support. I love firefox for Android.

  It is being developed and will be changed to allow the closure of the last tab in Firefox 18 or 19.

• Can I close a tab without leaving the app?

  I can't find an icon or a link for me to close a tab without closing the entire application. don't imagine that you would have eliminated. Thank you, rob

  Hi robkunjr,

  There should be a small "X" in the upper right corner of each tab by clicking on it will close only this tab. Take a look at this article for screenshots.

  Hope this helps!

• Is it possible to scroll the timeline left or right without having to move the mouse to the top of the window?

  First has a really cool feature that allows you to toggle a tool at hand to grab the chronology and away from the everywhere where you happen be left and right. I see that hearing has a hand tool if you navigate with the mouse to the top of the window, but it turns out to be a frustrating problem on my bench I have a large monitor, so up there, just to spend a little is frustrating. I know you can hold SHIFT key and scroll the mouse wheel, but this is very insensitive and in many too small increments to be helpful for what I want. I still find myself all just wishing I could grab the chronology of everywhere where is my cursor and simply drag to the left or to the right. Is it possible somehow?

  The left and right of the Page Page is very convenient. Who might do the trick for now.

  So, is there no way to disable the audio scrub? As I am locating in sound FX and things, I'm constantly wishing I could turn that off so I could scrub through the video and find my points of synchronization without hearing my audio monitors ROAR to me. First has it mapped to a keyboard shortcut to quickly switch it on and outside.

  Seems that the first people and the need of people hearing talk to each other a little more...

• Why this video keep opening in a new tab without apparent reason

  This promotional video of boring MacDonalds keeps opening in a new tab without apparent reason:

  https://www.youtube.com/watch?v=aOUdR9vly6s
  

  I do not do anything. I just read that a web page and a new tab will be opened with this video game. Any idea what's going on here?

  It cannot be the cause of your immediate problem, but I suggest strongly that you disable/remove your plug-in popular screensavers - a part of the troublesome MindSpark family.

  Google for information and removal advice. You could start by-
  http://www.herdprotect.com/npp5stub.dll-6d2d5521f8c15d587f05119c714f0a431d053be9.aspx