Close the last tab without closing the application firefox

Similar Questions

• How can I close only 1 session, without closing all sessions, when you run several at the same time?

  I run normally 2 sessions of Firefox. Currently I have 3 sessions running. How can I close only 1 session without closing all? When I choose "File" and then "Exit", all sessions nearby.

  Firefox does not work more 'sessions', you see several windows running in the same process. IE runs each window in its ' own process and Chrome runs each tab in its' own process, but Firefox running in a single process.

  Do not use file > outputis to completely close Firefox, do not close the window you are looking at when you use this command. There was formerly a command to close this window on the file menu, but who took a few versions ago. You will need to use the X in the upper right of the window to close this window and leave the other open windows. Or you can use {Ctrl + Maj + W} close the window that is to the point (where you look).

• Start threading with another processID, and then close the application

  Hello

  It is a delicate issue, so maybe something for all wizards among us

  OS 4.6.0 9000 "BOLD", put to the test through Wifi and 3 G networks

  As far as my knowledge about operating systems goes, it is not possible to start a process of your own application, close the application and then update the application. This is because the process began has the processID of the app as a parentID. So long as the process is running the application is running and access its files of cod.

  I'm trying to get an update mechanism in my application. At the moment I am citing a new private and out of my application (via the call onClose() on all the screens on the stack or the System.exit (0)) after the start of the thread of displayPage() browsersessions. I know, that probably would never work, but it is the simplest approach and worth a try. With the two variants to close the parent application ota download starts but hangs at about 10%. I guess that's because then a cod of the application file is tried to be crushed. The following threads and knowledge previously mentioned on OSs, it would be the point where the application must be fully completed.

  Now, even after all ways to close an app I know... even if I try to reinstall on OTA via the external browser, download hangs at 10% (App closed before!). Seems I have the same problem as this guy, but calling onClose on all screens does not solve him.

  Screw on the problems to kill a bb - app

  After the crash, the machine stops and restarts. Unless I start the app again once I'm able to reinstall via OTA Download in the external browser. This brings me to some open handles that could be left by my application close. Is it possible to really put an end to the application without the remains? In the following article, I read that there is some app cleaner memory running in the background. A cleaning of my application data can be requested manually when closing?

  Thread mentioning the cleaner memory application

  Article on cleaning memory

  Another approach, that I thought would write a separat Updater app. It would be installed via OTA on the original app (does not affect the files of applications). Then the application closes, the update must be run manually by the user. It will offer an opening to private download ota of the new app problem is still that the download would crash unless the former PPP has been terminated correctly before.

  Any ideas on this subject?

  Rob has soon

  Thanks Jerome,.

  He will give a try.

  Regarding the problem of update: call the external browser works fine, the only thing to be wary of is not to close the app but just ask the application to get to bottom:

  synchronized(UiApplication.getEventLock()) {
      synchronized (PersistentStore.getSynchObject()) {
          UiApplication.getUiApplication().requestBackground();
      }
  }
  

  from the download ota after that works almost perfectly (browser cache needs to be cleared before, cod size is 650 kb).

  Regarding the intelligent programming, I found this:

  Article on installing and updating applications programmatically

• The Application could not if initialize properly (0xc0000142) click on OK to close the application.

  Hi, I have a problem with this application. What happens is, every time I close my my office an error message:-l' app could not if initialize properly (0xc0000142) click on OK to close the application.
  Hope you can help me as soon as possible.
  Thank you.

  Hello Mario,

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the command sfc/scannow. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• VSNClient.exe - the application failed to start correctly (Oxc0000022) click on ok to close the application.

  I have the - 'VSNClient.exe - the application failed to start properly (0xc0000022). Click OK to close the application ".» After having clicked on the desktop does not come and the background is also black.  I can get to the Task Manager and using safe mode. I tried several ways to get rid of him without success. It is the Vaio with Windows 7 64 bit. Can anyone help please?

  VSNClient. exe is part of a product called known as VAIOSmartNetwork.exe and it is developed by Sony Corporation.

  You will need to re - install or remove in safe mode.

• JavaScript function to close the application

  Hi all, I did a very basic HTML5 form using WebWorks that allows users to fill out a load of options click on send (mailto, to send data to a database). This works well. However, after I sent the e-mail, the application is still open. Is it possible to close the application using javascript?

  you need this plugin:
  WebWorks plugin adds com.blackberry.app

  then, this function closed the application:
  BlackBerry.app.Exit)

  more info:

  https://developer.BlackBerry.com/HTML5/APIs/v2_2/BlackBerry.app.html#jbo1385148761859

• cmd.exe application error - application could not start properly (0 x 0000142). Click ok to close the application

  Original title: command line error

  I tried to open the command prompt in the Accessories menu and got a window named "cmd.exe application error". He said "the application could not start properly (0 x 0000142). Click ok to close the application.   Someone has an idea of what to do to fix this?  I am trying to run the file system check.

  Hello

  Did you of recent changes to the computer before the show?

  Method 1: Please check if you are facing the same question when working in safe mode.
  a. restart the computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.

  Reference:--

  Start your computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: If you are able to open the same safe mode command prompt, then try to run scan SFC. Please follow the steps in the article.

  The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:
  http://support.Microsoft.com/kb/929833

• try to download adobe flash player... message says close the application "brccmctl". I don't know what this app is or how to find

  I am trying to download adobe flash player but get a message to say to close the application "brccmctl". I don't know it and can't find it on the computer

  Hello

  1. do you get an error message? If Yes, what is the full and exact error message?
  2. what happens when you try to install the Flash player?

  Method 1:
  The program, brccmctl.exe is a monitor of printer Brother Industries, Ltd.
  I suggest that you try to put an end to the program from the Task Manager and then install the Flash player.
  a. right click on the taskbar.
  b. Click Start Task Manager.
  c. on the Services tab, locate the brccmctl.exe service and terminate the program by right-clicking on it.
  If you are still not able to install the Flash player I suggest to uninstall the associated brccmctl.exe program and then try to install it.

  Method 2:
  I suggest you to see the links and check if it helps.
  Flash Player installation instructions
  http://www.Adobe.com/products/flashplayer/productinfo/instructions/
  Installation problems | Flash Player | Windows

  http://kb2.Adobe.com/CPS/191/tn_19166.html#products

  Hope this information is useful.

• I train for adobe flash, but it gets stuck in the Middle download saying "close idvault. Cannot find where to close the application.

  I train for adobe flash, but it gets stuck in the Middle download saying "close idvault. Cannot find where to close the application.

  Click Start, type: Internet Options

  Press enter

  Select the "Advanced" tab

  Under reset Internet Explorer settings, click "reset".

  This should restore the Internet Explorer default settings.

  Then reinstall Flash Player

  http://get.Adobe.com/flashplayer/

  ----------

  Flash Player

  Troubleshoot installation of Flash Player for Windows

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Troubleshooting player stability and performance

  http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

  Uninstaller

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Flash Player Support Forum

  http://forums.Adobe.com/community/webplayers/flash_player

• Cannot start/open new Premiere Pro trial - error flag reading - on demand could not start properly _ 0c000001d click OK to close the application

  Dear Forums

  Cannot start/open new Premiere Pro trial - error flag reading - on demand could not start properly _ 0c000001d click OK to close the application

  * Also, I sent my first question 20 minutes ago, not yet approved? Your return indicated "approved" e-mail, * why do I not see my question below still displayed? >

  The members of the Forum Pro first - Hello
  

  
  

  Can someone out there describe in simple basic procedure, how a first time user start using Premiere Pro to the layer just a moving figure video of 5 minutes (a friend aerial artist model with white moving belt in silk on a rest mainly black background layer and a change to a night sky stars panorama I photographed previously?)

  I know that this can easily be done, I have worked in thousands of still images with creative cloud for previous years, but not yet in video in Premiere Pro, so thanks for any advice.

  I enclose the actual video that I use and some samples of the fields of the night sky that I photographed recently for ideas

  I intend to make possibly more elaborate, but for now if anyone of you could just show the basic commands and menus/menus to start to do it simply and quickly. Maybe how to most later convert it tone black & white or sepia. The ideas here is to recreate a sequence modern suite of familiar German Film, wings of desire. Perhaps also a progression in the future to create an effect of the night sky very slowly turning into one layer background behind the main façade first video layer in normal movement. Then maybe a little further - how to adjust the speed of the front to a path layer more slow half price while keeping the substantive motion, the original speed. (* although I realize that I didn't do in 64 fps for the slow movement, I am not concerned about that and would actually welcome a light old world "flip effect framework" as if, in appearance of the films more former silent motion.) * In addition, possibly cutting on 'dead time' a few seconds at the beginning of the video and the 2nd or 3rd time for a few seconds of this unexpected error, when the silk scarf fell on the camera lens (without changing the audio timeline?)

  * (I use Windows 7 on a Toshiba Satellite L555 - [only RAM 4 MB. rates], 2009)

  * Video sample >

  Sarah Seiler Aerial - camera Check-An Unedited manifesto-Dec 16 2015 - YouTube

  * Background samples >

  w-left-west-frames-with-earlier_sept-8_9-2015_1_stitch-mercator-projection-2a-titles-5000-pxl-b_galaxies-at-right-enlarged-5500-pxl http://www.dpreview.com/galleries/1579463287/photos/3374478/Trillium-Lake-Aurora-add-26-ne

  Comet Lovejoy Andromeda brand camera telescope DSC3857-1a-blue-light-increase-layer-Nov 20 2015: Mark Seibold: Galler...

  Larch Mtn Night Sky Sony NEX5R 5 Oct 2015_panorama point 2 b side of cropped rt 3000 pxl: Mark Seibold: galleries: digital...

  Cannon Beach Haystack Rock mamiya 55mm 25 2015_10_stitch_102 26 Aug frames Projection of Mercator Crop dark as he nu Fi...

  Trillium Lake Mount Hood Dark Night Sky Nov 10 2014_stitch a 5000 pxl f to fill 2: Mark Seibold: galleries: Digital P....

  Thanks so much for all the advice of one of you in the Adobe Premiere Pro forums,

  Mark E. Seibold, artist-astronomer, Portland Oregon

  Duplicate thread here: may describe in the simple basic procedure, how a first time user start using Premiere Pro to the layer just a moving figure video of 5 minutes (a model friend artist air with white passage belt mainly black silk )

  Thank you

  Regalo

• Version 5.0 will not offload the memory when I close. This translates not being able to open FF later unless I manually go and close the application in Windows Task Manager. Any ideas because it becomes very frustrating.

  I have this problem on 3 computers just updated with FF 5.0. When I close FF, the application "Firefox.exe * 32" remains in memory. Trying to open FF later greets me with the error that FF can't open because another instance of FF is already running. Previous versions is completely discharged and has never caused this problem...

  You can check your add on for compatibility, there may be conflicts.

  For now, you can use the command "End task" in the Task Manager to close Firefox before opening another version.

• "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  I have a Dell all-in-one that I had to send for a new motherboard. While they have it, I got them the reformat. I'm trying to put Skype on it, but I get this error message once downloaded and when trying to install: " ", ", the application failed to start correctly (0xc000007b). Click OK to close the application. " I am running Windows 7 Home Premium 64-bit. None of my other programs I had to reinstall caused me a bit of trouble, but Skype won't move past this error message. Any help would be appreciated.

  I thought about it. I couldn't install it from Chrome, but I did of IE and it's fine now.

• The appilcation failed to initialize properly (0xc000007b). Click OK to close the application.

  The appilcation failed to initialize properly (0xc000007b). Click OK to close the application.

  Help please.  My computer has been infected by a virus some time ago.  I have cleaned the virus and now get the following message is displayed.

  Running Vista Home Basic Service pack 2 32-bit system.

  In particular I am getting kind of Spider solitaire, but I think I've noticed this on other games/programs of microsft preinstall.

  I have run chkdsk /f and / r but still have the same problem.  Thank you in advance.

  Hello

  It happens with any application?

  Method 1: You can also put the computer to boot and check if any third-party application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I suggest you to run the SFC scan to make sure that the system files are intact:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Check in the case where the Viewer for any question regarding newspapers

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• How to return to the previous screen on Pre apps? THETE´s no back button... just close the application and start over?

  for example with text messages once im in a conversation can how to return to the screen with all my converdations? It's the same with any of the apps, West no way to go back? should I always close the app and start again to go to the previous screen?

  You must not yet be aware of the gesture «back» It goes like this, the straight shot, left on the gesture area (the area below the screen, left and right of the Center button). You enter only at half way, and you can start on the right edge, or just left of the Center button.

  Become very familiar with this gesture he used all the time.

  There is also an option that you can activate by allowing a complete sweep in any direction will take you to the adjacent open card. I think that this gesture is set to off by default.

  Good luck.

  PS - In the application of Navigation of Sprint, I can't seem to leave the navigation once it starts. In other words, you must close the application and open again to define a new topic. I know two ways to issue the command to stop the navigation, but none of them work effectively.

  Message edited by Mrolesen on 21/06/2009 20:17

• Window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application when you try to run Microsoft solve this diagnosis

  Original title: Microsoft Fix it diagnosis

  I ran Microsoft solve this diagnosis. He gave me a window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application.  someone knows how to fix this?

  Thank you

  FOR EXAMPLE

  Hello

  Thanks for the reply. Until I'm your answer I have restored the laptop to the State of origin, with the possibility of restoring elements that had been added by the user. I'm trying to update windows, etc.. If I get errors or problems I will post them here. Thanks for your detailed response.

  Eddie