Change text alignment passes - the scale of the site

Similar Questions

• Why my police/text change when I pass the classic 3D Ray traced 3D in After Effects?

  My fonts/text changes when I pass the classic 3D Ray traced 3D. Why would he do that? In addition, I can't have the fonts/txt look the same after I switch from classic to the Ray traced. How can I get it to look the same?

  'Normality' disappears because blend modes do not work in the ray-traced rendering engine. Fortunately, you just had it set to normal and weren't trying not to use the screen or multiply or something else. It shouldn't be a problem for you.

  The text changes color is because the ray-traced rendering engine is made things very differently. You must go in the hardware settings and adjust them to the ray-traced rendering engine. For example, it is reflective? If so, that would make a big difference in how it looks based on what you have reflecting.

  That said, Adobe is not putting more work in the ray-traced rendering engine, so if I were you, I would focus my learn more about the new way to do 3d in AE (because he will get better and better as they put more time development in there). How is this? In this way: Details of CINEMA 4 d with After Effects integration

• Is my client using the web browser editor can change the position of text and images, the site was built with muse

  Is my client using the web browser editor can change the position of text and images, the site was built with muse and at first, tell him that he could change the text and images, but he can't change the location of contents of Th.

  Now he wants to paste and copy directly from the web browser Publisher Word and wants to change all of the place itself.

  Does someone have an answer or another solution?

  Philippe

  First of all, to answer your question about moving content. No, that is not supported.

  Then, never advised him to stick to Word what for the web. Word adds a lot of very strange code that can break your page completely. Tell him if he has a Word to add to the site to paste into Notepad or any other text editor, copy and paste to Muse.

• Problem with text table: text align to the left in the table

  I can't try to get the text to align inside a table. I'm working on a document that has the body text indented to 12 mm. I discovered that the left of the table corresponds to the tabs and it remains fixed on the marks of the tab. I managed to get the first row of the table to align the text of body outside of the table and the table is positioned how want it to be, but I can't get the rest of the text to align with the first line. Here is a screenshot of the problem:

  

  I did it by changing the removal of paragraph to 12 mm and by changing the withdrawal of first line to 12 mm. I've been fiddling with the tabs and other settings, but I can't not all aligned text. Is there a way to align it all without creating a separate or rectangle text box?

  Best regards, Kirk

  Thanks for your help. I just found out that I was using a paragraph style just outside the table who had no hyphen, and it prevented me to rethink the table. Your method worked, but only in the document with examples I showed you. (I did separate because I work on the project of sensitive information) and when I pasted in my working paper, the table is always aligned to the left margin. I then checked the paragraph mark immediately after the table, and there was my problem. I just changed the paragraph style to the same as the outside of the body text. This caused the table to align the body text without affecting the text inside the table.

  

  Best regards, Kirk

• JDeveloper 10.1.3.4: text-align for the table column has no effect

  Hello
  
  I use JDeveloper 10.1.3.4. In a table, I have a column that contains the numbers, which are aligned to the left by default:
  

  Applied
  ---------------
  $50.00
  $2,160.00
  $50.00
  ---------------
  $2,260.00

  I want to be aligned with the right to examine more carefully:

  Applied
  ---------------
           $50.00
        $2,160.00
           $50.00
  ---------------
        $2,260.00

  Or better yet, have the cell with the longest string aligned to the Center, and all the other cells in alignment with it by the decimal point:

      Applied
  ---------------
        $50.00
     $2,160.00
        $50.00
  ---------------
     $2,260.00

  I looked in the property inspector, and the only thing that seems closest to the goal is text-align. I put this attribute on the right (text-align: right) for the column and the outputText, but has no effect. Everything is always embedded on the left. How to do things?
  
  Thank you!
  
  
  Newman

  Hello Newman,

  as I recall, I did using the formatType property = 'number' of the component of the column

  Kind regards

  Branislav

• How to define the format of a field drop-down list text align at the top of the field instead of the Center?

  I have a form with the fields of data entry simple Acrobat 11. I have, for the first time inserted drop-down lists and most of them is single-line fields. However, there are a few examples where my field must be larger to mask unwanted background. (The field will define the colur to white background are data entry, but I did not write the script for this.) When a selection is made, it appears centered in the field and I need to be aligned to the top.

  I guess I can put a script on the Format tab, in the custom format script, but I don't know enough about Javascript to run on the syntax. I guess it would be a simple line or two of code. Can anyone help?

  You have no control over this. They are always vertically centered. You can use a separate field in the drop down menu, however, and control its background. I suggest to use a read-only button.

• How to change existing keywords when the site is not in the bookmarks bar?

  I've implemented several shortcuts keyword for sites that I use frequently. Now, how can I change the keywords or URLS when the site is not in the list of bookmarks? Is there a master file Firefox for these access which can be edited by the user? Or another way to get to them?

  Not sure if it's the same on Mac OS x, but it is how it is done under Windows and Linux versions of Firefox.
  
  Bookmarks > organize bookmarks
  
  Highlight the bookmark in the right pane, and then click more at the bottom to see the keywords and Description fields for this bookmark.

• Download the text file of the site domain

  I need to download a text file to a directory of a domain site.  Text file is saved  What to do next?

  On your PC, right-click on the text file, and then click on copy.

  Connect to the domain (if you don't know how, you will need to get instructions from the domain administrator on how to configure your PC to connect to the domain - specific settings that are required there and they differ by area - and you may need to be configured on the domain and given rights).  Once the installation program I would map a drive to the field to make easier access next time.  Navigate the site of field to the directory where you want the file to exist.  Right-click on the directory and click on paste.

  The file will now have been copied in the domain site directory (assuming you have the appropriate permissions on the domain server to add files in this directory - you will need to talk to the domain so that administrator it it gives you an "access denied" or "you do not have sufficient to perform this task" or a similar error message).

  That's all there is to it.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Font changes when you view the site on ipad?

  Hi all

  I made a website for a client who uses the Lucida font without on the desktop version. http://masonandstjohn.BusinessCatalyst.com/

  Without sudden Lucida fonts 'Web Safe' section in Muse.

  The problem is that this font is Arial when the site is viewed on an iPad.

  How can I make the police discovers that Lucida without on the iPad?

  Thank you very much

  Ben

  On another look at the article I linked, it seems that Lucida Grande is in fact one of the fonts that iOS apps can download if necessary and that it is not one of the pre-installed fonts. The way that works is described here (note that a policy will not download if a website requests via a browser, seems to works with some applications like Pages, Keynote etc that demand and once downloaded can be used within the app only) - https://discussions.apple.com/thread/5514436.

  Yes, it isn't a web font that secure and therefore is not listed in the Muse, I was talking about actually family of fonts where Lucida without use of Lucida and so on if the device supports. And as iOS supports none of those, worth default sans serif which is the last battery.

  So either use a different font that supports iOS, or use web fonts, or if you have Lucida without installed on your system, apply it as a system font through Muse (which would export the text as an image), or if you have the file .ttf to the police, you can take advantage of the CSS3 font-face rule if this is useful - http://forums.adobe.com/message/5124151.

  Thank you

  Vinayak

• Change all links to the site from absolute to relative

  So I'll try to make an individual link to absolute to relative, however, it is an image file to a favicon. When I change all the links of the site normally makes the link on the page all the "images/favicon.ico', but this does not work for pages not on the root of the site. So, how can I do this correctly?

  I use DW CS4.

  I don't know what you're asking.  But by this root favicon of the site link, you should be fine in all pages.

  Search for "href = images/favicon.ico""and replace with"href="/images/favicon.ico".

• How to change remember password for the site.

  When the password has been updated, the memory of password has not changed. (Field 'Remember password?' did not.) I need to update password to remember. (Firefox on Windows 8.1)

  See this KB article - https://support.mozilla.org/en-US/kb/password-manager-remember-delete-change-passwords

• Changing symbol/color as the site is up and down home Portal Page

  Friends,
  
  We have an obligation to have our symbol portal home page of some sort to turn to different colors when the system is under construction or when our web application is ready.
  
  Some kind of symbol to show green when things are running and red when things are under construction(i.e.). Updated systems, system failure, etc.
  
  If someone get involved with some suggestions or the document or code that we can use, I really appreciate the help.
  
  Thanks in advance.
  KA

  There are two aspects of it: when the system is installed, but have errors or when it is down.

  1. the thing you want to implement can be designed by exploring options in the portal of error handling. You can identify errors and then use some models or your error-base-sheets of style or other dynamically.

  To identify erroneous situations and implementations of error handling, see this link [implementation error handling | http://download.oracle.com/docs/cd/B14099_19/portal.1014/b14135/pdg_pdk_plsql.htm#CHDBIJFI]
  and also explore the following APIs. -
  wwerr_api_error and wwerr_api_error_ui packages

  2. for the second scenario, you need something that also works when the server is not responding or is down. Such things would require intervention at the level OS and redirecting to a page which can have the look you want.

  hope that helps!
  AMN

• How can I change image displayed when the site is shared on social media sites?

  Well, when my site is shared by anyone on Facebook, I want to do my logo but it shows another picture on my home page how I can change this picture?

  Hello

  If you still experience this issue, please refer to this link:- https://forums.adobe.com/message/5137786#5137786

  Kind regards

  Rohit Nair

• Text to justify the right in my Paint event

  How we go on using the method Graphics.drawText (), but make the text aligned to the right?  I tried all sorts of different things, but nothing seems to work.

  including the g.drawText ("Hello World", 320, 5, DrawStyle.RIGHT)... which, according to the documentation of the class Graphics should work, but apparently not.

  Any ideas or suggestions?  Is there a way to measure a piece of text instead?  That would work too.

  For example:

  g.setFont (g.getFont () .derive (Font.BOLD, 24)); ... that defined the police in a "BOLD" version 24 pixels.

  g.getFont () .measureText ("Hello World")... something like that would be great.  I could just take the returned int and change my anchor drawing myself in the drawText() method to achieve the right alignment manually.

  I appreciate any help you can offer.

  what you are looking for is graphics.getFont () .getAdvance (String, string), returns an int. Add a little for good measure and there you go.
  You should check for (too) long text, if the advance is larger then the screen width drawText will begin outside the visible area.

• How to center text compared to the other two layers

  Hello world

  It seems simple enough: I have two layers of distinct text - both in the same line. One is left-aligned, the other is aligned to the right, so that they specify in the middle. Overall, I want they to be centered.

  

  But because these two texts will have different formulations of various projects, I want to use the model function, so I can edit them in first.

  Is there a way to tell After Effects: "some text there, take two text layers and their Center as a whole."?

  For the life of me I can't figure out how to do. The closest I am to a solution is an expression on the anchor to a null object, which reads:

  W1 = thisComp.layer("Text1").sourceRectAtTime () .width;

  W2 = thisComp.layer("Text2").sourceRectAtTime () .width;

  [(thisComp.width-(w1 + w2)) / 2, value [1]]

  Then the text layers are related to the null value.

  I found this in a post on Creative Cow: multiple text layers to form one. how I can it Center as a whole?: Adobe after effects Expressions

  The problem with that: it works with the text aligned to the right. If you change the text aligned to the left, everything goes to the left.

  Does anyone have an idea how to make this work? It may even be a way simpler than using expressions?

  I hope I could explain the problem. If there's anything missing please let me know.

  Thank you!

  Concerning

  FABI

  There is no demo that is involved in the technique. Alignment tools will not work with a demo. In the screenshot at the top of the page, note the selected text and the reference level setting in the character Panel. I just adjusted the base line in the second paragraph of the text to move it to the top so that it is aligned with the base line in the first paragraph of the text.

  Unfortunately, the process becomes a little more difficult if you want to be able to use this model as an asset of editable text dynamically linked in Premiere Pro. Centering becomes a problem. It's pretty easy to get the width of the text layer but the anchor is based on paragraph and I'm not in any way take the width of the first paragraph of the text and add it to the width of the second paragraph of the text and adjust the anchor point to be at the center of the paragraphs combined.

  You can return to the idea of two layers of text, but use the width of each layer and the ratio between the widths to control the position of a null value. If you then related the two layers for the null value, the null value of centering with an expression based on the width of two layers and the ratio between the width of the left and right text would do the trick. I have to think about how to write this expression a bit. This is probably the solution to your problem, but I don't think I could write this expression in my head.

  What you want to do is to calculate the total width of the two layers (tw) and then calculate the ratio between the width of the two layers (rw / lw) then multiply the width of the layer left by the ratio then you can calculate the offset. You may have to calculate the ratio of the layer from left to the total width of the two layers. As I said, I'll have to think for a minute. There is also the problem of the space between the two layers. You will need to add a space before the first letter of the right text layer, but the size of the right layer won't take into account the space so you have to measure it and add it to keep things perfectly centered.

  EDIT:

  So I did a reflection more and I was doing it too hard. All you have to do is to calculate the difference between the width of the layers both text and divide by 2 and add it to the Center comp. name your layers of text left and right, and then add this expression to a null value.

  r = thisComp.layer ("right Text") .sourceRectAtTime (time, false);

  R.width = RT;

  l = thisComp.layer ("left Text") .sourceRectAtTime (time, false);

  lt = l.width;

  CC = thisComp.width/2;

  DIF = (lt - rt) / 2;

  [dif + cc, value [1]]

  Now, hold down the SHIFT key and parent the two lines of text to null. If you don't want to use the trick of null, you can add the expression of two layers of text. Using the value null makes it easier to move. The expression can also be modified to allow you to position the null or layers wherever you want in the model.