Change the color of the user interface in the settings?

Similar Questions

• How to change the settings on the Equium A100 color & contrast

  Does anyone know how you change the settings on the Equium A100 color & contrast? Thank you.

  Hello

  Change the contrast and color?
  Well buddy, you can change the screen brightness level using the FN + F6 and F7 key combination of.
  The other settings are only editable in the properties of the graphics card.
  I put t know what graphics card you are using but usually you must search advanced options.
  Check if there is no gamma, brightness or contrast settings.

  I found these settings on my laptop. I have a graphics card intel and the option was called the color correction

• Change the settings of the user

  Hey,.

  I would like to ask whether it is possible to change the settings of the technology for the network user. I went through the documentation and unfortunately I have not found something to do, other than reading enabled technologies. Basically, I would like to make an app without head that allows to control the technologies of active network based on the use of the network. For example:

  1. active use: 4 G

  2 moderate usage: 3 G

  3. no use: 2 G (to receive emails, messages, etc.)

  Kind regards

  Daniel

  Edit: IMHO, if there is no such api to control user settings, it could be a really nice addition to the next OS update. Of course, for security reasons an application must ask permission to the user on a per parameter basis.

  There are very few API to make adjustments now.

  I suugest go you to SAID.

• How can I change the settings in the appearance of a user without admin rights?

  Hello! Here's the deal: when I logged as a nonadministrator user, I can't customize some settings for this account in appearance.

  After that I have to change some settings, for example to disable smooth list scrolling areas, all these settings back after reboot.

  I think that this somehow related to the fact that these actions require administrator rights and basically at the end of the day I change the settings to another account (Administrator).

  Hello

  Thanks for the quick response.

  Based on the screenshot provided by you and my research, this problem seems to be related to the (UAC) user account control.

  Please check the suggestion provided by Andre.Ziegler August 5, 2010 in the link below and if that helps.

  Visual effects settings will remain disabled after a restart on the limited user account...

  Note:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  Hope the helps of information provided. Let us know in case you need more help.

• Change the settings to open the PDF document.

  Hello;

  I use Adobe Acrobat Pro XI 11.0.13.

  I am a link to two adobe files on my site, but they appear differently. How can I change the settings on an adobe PDF for when the file is opened?

  This is how the first link opens the PDF file in the browser (internet explore). It includes the PDF tools and other options which I don't want.

  

  This is how the second link shows the PDF in the browser (internet explore). It shows just the PDF page and that's it. That's what I need.

  

  I need both to display as the other, but I can't seem to know how to do it in the settings of Adobe.

  I opened the two files in the actual file where they are drawn / related to and open them in the same way as the above examples. It seems that there is a way to change the view/settings by default when a PDF document is open. I tried changing the settings in preferences, edition, Page view among a few other places, but can't seem to get anything to stick.

  1. go to file > properties

  2. in the Document Properties window, select the tab view original

  4. in the properties of the Document window, in the section of User Interface Options, make your customizations

  5. in the Document Properties window, click the Ok button

  6. go to file > save

  7. close the document

  8 open the document

• I changed the settings of Java and now Firefox plant she opens up, even in safe mode; How can I fix?

  I tried to change the settings to access the comments section of Slate.com. Good or bad, I changed a setting Java-1 to 2. The setting spoke in: config and I think it was some sort of max. As I can't open anything, I'm not sure.

  When I made the change, firefox crashed immediately, whenever I tried to reopen, even in safe mode, it hangs again immediately and will not reopen.

  Hi pternagy,
  Sorry, you have problems.

  For any future reference. Those of us who mess directly with: config soon find out how to get errors and it is wise to backup. Occasionally backup of your entire profile for example can be useful and would probably give you a quick solution of the copy on the file from the backup.

  • Backup and restore Firefox profiles information

  OK on the topic to try to get Firefox back as it was:
  Find your profile and the prefs.js file and rename that. (The renamed file is a potentially useful backup.) Firefox is then forced to regenerate the file and will reset your default preferences. You can then re open and use Firefox. Then, try to return to normal.

  Try to manually change the file prefs.js is normally a bad idea. However, if this is a one-time change prefs it would be possible to directly edit the prefs.js file (while Firefox is closed) to get everything back to how it was before. You have the file renamed to work with. Probably best to test this in a new additional profile so only break you test additional essential Firefox profiles profiles works do not.

  These articles should help you:

  • http://KB.mozillazine.org/prefs.js_file
  • _Solution-2-delete-Firefox-preference-files Reset Firefox preferences to troubleshoot and solve problems
  • Profiles - where Firefox stores your bookmarks, passwords and other user data#w_finding-your-profile-without-opening-firefox
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

  Please post back with how you go and if you need additional assistance.
  Good luck.

• How can I change the settings back from high to low at the visualization of certain things

  To view some things it makes you change the settings. How can I change them back?

  What kind of settings you changed?

  You can rename or delete the file prefs.js and possible numbered prefs-# .js and a user.js file possible to reset all default prefs.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

• How can I get the airplay icon to appear? Changing the settings of firewall does not work

  How can I get the airplay icon to appear? Changing the settings of firewall does not work

  Hello Drjoe378,

  I understand that you do not see the AirPlay icon in iTunes on your Mac. If you have verified that your firewall is disabled or that the problem occurs regardless of the status of your firewall, there is a little more that can help return your ability to connect to AirPlay devices.

  1. Make sure you have the latest version of iTunes and Apple TV software.
  2. Connect your computer and other devices on the same network Wi - Fi. If you are using Ethernet, connect the two devices on the same router or hub. If you use the Wi - Fi and Ethernet, plug your device AirPlay the same router that your computer uses for Wi - Fi.
  3. Restart your computer, device AirPlay and network router.
  4. Because some Airplay devices include a power switch for AirPlay option, look for the option in the settings and make sure that the feature is enabled. Refer to the user guide of the device for more information.

  Use AirPlay to stream content from iTunes on your computer wireless
  https://support.Apple.com/en-us/HT202809

  All my best.

• Changing the settings of the BIOS with Satellite L505D-S5006

  Hello! I am trying to access my BIOS to change some settings in it, but when I enter the BIOS Setup I can't change anything in there (everything is greyed out) and the options are minimal. Currently, my BIOS version is 1.0.0. I tried to download the needed update for it, but when I install and try to run it, it says "cannot retrieve information from the system BIOS. BCPSYS block signature not found. Error code:-100. »

  I am downloading from this page here: [http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp?service=EU]
  * Product type: * for laptop
  * Family: * satellite
  * Series of products: * Satellite L series
  * Model: * Satellite L505D
  * Short model: * (for some reason any the only option here is PSLT9E, but my PSLV6U reading on the bottom of the laptop.) This has something to do with not updated to the correct version, I wonder?)

  So I have to skip the last step and [http://eu.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fbios-20100510134014.zip] appears so I downloaded and installed and that's where the problems start.

  In short, there is an another easier way to enter a BIOS where I can change the settings? Or what I need to find a different BIOS update?

  Thanks in advance for the help!

  The whole story is a bit strange.
  Every new notebook comes without any limitations of the BIOS, and when you buy a new laptop, for that you must have full access to all the available BIOS settings.
  So the question is:
  Have you bought this laptop like new?
  Is - the first time you try to change something in the BIOS?
  You may have defined user password (Toshiba Assist > course > user password)?

  You can use Toshiba hardware configuration tool to change the settings (settings of the BIOS)?

• Windows updates won't allow me to change the settings.

  Running Vista on a new Satellite from Toshiba. Updates Windows refuses to allow me to change the settings; It is set to download/update automatically, but I want to see and select updates. When I click on this box, then ok, the authorization window returns. I click 'ok', but there is nothing else that a flicker of the cursor runs. Nothing else comes up, and if I have to cancel the window updates, it is up to the automatic update. I am the only user and have always been administrator.

  It's too late to install MSE or any other antivirus application now.

  You will find information about any Recovery hidden partition manufacturer support pages.

  If you use the disks you created, you would use the OS disk first then the drivers disk.

  If you need help, start a new thread here: http://social.answers.microsoft.com/Forums/en-US/xpinstall/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I want to install Win Xp Pro so that only the administrator can change the settings

  Hey

  I want to set up a Win Xp pc so that only me as an administrator will be able to change all settings and install all the programs. Because the pc users is illiterate and changes the settings in the way n I need to format the pc every 4 months.

  Is there anything we can do about it or not?

  Kind regards

  Hello

  I would recommend that you change the account type to increase or decrease the rights of the user on the computer.

  Follow the steps in this article to do.
  http://support.Microsoft.com/kb/279783

• change the settings of the view variable value

  Hello

  I want to know if it is possible to change the settings for the debugger, including the display of the "view variable values" settings in labwindows cvi 9.0.

  My problem is that in my project, it is essential to be able to debug and I came across some difficulities with the array of structs containing pointers to structures. So, I did a demonstration to show project:

  typedef struct {}
  short sVar1;
  short sVar2;
  char cVar1 [512];
  } MyStruct2;

  typedef struct {}
  MyStruct2 ReadMyS2;
  MyStruct2 WriteMyS2;
  MyStruct2 * pReadMyS2;
  MyStruct2 * pWriteMyS2;
  } MyStruct1;

  int main()

  {

  MyStruct1 MyS1_Phis [3] = {0};
  int i = 0;

  init
   
  for (i = 0; i<>
  {

  MyS1_Phis [i] .pReadMyS2 = & MyS1_Phis [i]. ReadMyS2;

  MyS1_Phis [i] .pWriteMyS2 = & MyS1_Phis [i]. WriteMyS2;
  }

  }

  Unfortunately, the debugger handles .pReadMyS2 pointer [0] MyS1_Phis as if that it points to an array of 10 elements of type MyStruct2.

  Anyone know the reason for this?

  Thanks in advance,

  Laszlo Nagy

  Hi Laszlo,

  Yes, it is a known problem in CVI. This can happen because of the way the CVI user protection is implemented. It is certainly not desirable, but we probably won't be able to change it at least still a year or two.

  A solution you have is to disable the protection of the user and then rebuild your program (Options > Compiler Options > level debugging: no execution check)

  Luis

• Document and changing the settings

  Computer's hand and have no disk Windows XP Prof. of origin.  Unable to access up-to-date Outlook 2010 without him to be lacking in the original Server Configuration and password.  How can I fix it, put in place the new "documents and settings" folder with the new username?

  Get disks.
  Format and clean install.
   
  Why?  Not sure what all could subsist on this 'hand '.  If you can see the type of Windows XP Professional is installed (OEM, retail - usually can tell the product ID found in the property system, under the general tab window in the section ' recorded at the ') and you can find someone with a generic version (unedited) of said operating system installation media (Windows XP Professional OEM or retail - in accordance with what you have discovered)-then you can get the product key from the system work (Belarc Advisor) and do a clean install.
   
  Make sure that you back up all important data for you.
  Make sure that you have the installation media product keys/serial numbers and separated from the machine for everything that you will need to install.
  Make sure that you have the list of the material and/or have already downloaded the drivers for the hardware to install after clean installation.
  (The last two are greatly helped by using Belarc Advisor, print the results.)
   
   
  * You should be able to change the settings for Outlook via--> MAIL control panel - at least for the current user.
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• How can I change the settings to use wds Explorer format NO libraries - man of my file were not placed there by vista

  I have over 300 photos, 150 + documents, large files of Family TreeMaker large and reports for five separate families. Of course, there are some thecomputer file uses. And a number of files of daily use.
  LIBRARIES do not contain all these files - the only way I get to the file are not not in the library is to use Windows Explorer, and who does not always show the genealogy reports.
  Only about a quarter of my photos were listed in the picture library.
  The Stands of Question - how can I change the settings to get rid of the LIBRARY format and return to a format similar to or is Winows Explorer?
  AND the second Question, use the list of records, no libraries, wen I move to Windows 7 and Family Tree Maker 2012 once the computer is repaired?

  Hello

  1. Please let us know which Antivirus are you using?

  You can disable the libraries in Windows 7. Please visit the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/turning-off-libraries-in-Windows-7/18d001dc-5319-440b-B29C-d348f81c929c

  It is not possible to delete libraries. Libraries are part of both Windows Vista and Windows 7 operating system.  You can still navigate through your files on the computer--> C :\-> users-> .

  Please visit the following link:

  http://TechNet.Microsoft.com/en-us/library/ee449413 (WS.10) .aspx

• Changing the settings to default print with CUPS still does not work, regardless of the application

  Hello, I looked through a number of positions on the definition of default printer in a Mac, but nothing solve my specific problem. I recently spent a PC to a MacBook Pro, just updated to Mountain Lion and installed my printer wireless, HP Deskjet F4500 Series, with the pilot chosen by my computer. The printer-computer connection usually works, but when I go into the CUPS and change the default settings for Fast Draft, n/b only, it does not apply when I print. I tried several times, making sure to save my default settings in CUPS (and indeed they appear here as Fast project, b & w only), but no matter which application print from - Safari, Chrome, text edit, etc.. - it prints in color and normal mode unless I manually selects the settings for that particular print job. This is especially a problem when printing things that are not pop up a print dialog, such as online coupons. I could easily change the settings of the default printer on my laptop and they apply to coupon print as well, but I'm having no luck with the Mac. Help, please! Thank you!

  Finally I got it solved!

  There are two options in Mountain Lion when you add the printer HP CM1415fn (Apple-> preferences-> Print & Scan system): "AirPrint" and "HP LaserJet CM1410 Series.

  So, with "AirPrint" set default CUPS Options has no effect, even if you change. PPD file.

  Fortunately, with the 'HP LaserJet CM1410 series' setting CUPS the default Options works well!

• HP deskjet 4515: changing the settings for print quality

  Hi all

  How can I set the print quality of my printer on my macbook to project quality and black color only

  Welcome to the community of HP, @ahmadzamzam 

  Here is an article for you to see which should help you to change the settings for print quality on your Mac. Please be aware of the ads on the article page and not click on them (or just close them).

  MacLife: How to optimize your print settings

  Good luck