Change the configuration of the built-in VNC server

Similar Questions

• How not one disables the built-in web server?

  In my case Adobe technology enabled web server integrated for some sort of test and left, that it has.  I would like once more to turn it off to limit the attack surface that I see it's getting some visits by an internal network vulnerability scanner.

  Where is the configuration file and setting specific to only disable the built-in web server?

  Unwanted changes to the built-in web server is referenced in this article in the forum: http://forums.Adobe.com/message/4388179

  Add Miguel-F information, in case you use ColdFusion 9 then, adding only the code below, in the section above will be used.

  true

• HP Laserjet M606x: Disable the option 'Print' in the built-in Web server

  I am testing a new HP Laserjet M606 device and to disable the option 'Print' which is displayed in the 'Information' tab in the built-in webserver (EWS). I have a firewall turned on, turned off wireless printing, FTP, AirPrint, Web Services, PPI and independent producers is also disabled. HP Jetdirect XML service is also disabled. I have crossed most of the EWS settings and configuration options in JetAdmin and did not find an option to turn this feature off.

  The device will be located in a public place and will have a reserved/static IP address (DHCP reserved). We charge for services to the end-users of printing - having this option turned on means that users can print for free if they find the IP address of the printer - not an ideal situation.

  Is it possible to disable this option permanently? The only other solution is to disable EWS entirely, if possible.

  To be a little more specific in the built-in web server click the Security tab. Now scroll down until you find the section for embedded web server settings. I was watching who had enough current firmware in the machine there is a checkbox to enable or disable the option for printing on the information page.

• How to change the name of host server IMO?

  Hi, guru.

  Is it possible to change the name of host server IMO?

  Architecture:

  Server A - Oracle RDBMS

  Server B - IOM: admin, IOM, soa.

  Version of IOM - 11.1.2.1.0

  (If possible) it is necessary to change the server A server B in host names. During installation, the FQN to the server host names have been used.

  The procedure for changing the DB server host name is clear and simple. The question is on the server of the IOM.

  Unfortunately, I did find the documents that describe the process of change for the IOM system hostname. But fortunately the problem has been resolved.

  Shortly, the process is as follows:

  1. in my case: db oracle 11.2, wls 10.3.6, iam 11.1.2.1.0, soa 11.1.6. System - DB Server + server of IOM.

  2 VMS when copied to the new server.

  3. change the configuration files of MAC, IP, two servers.

  4. change the host name of the DB server. Restore the dbconsole EM repository (if used).

  5. change the IOM servers configuration with wlst listeners.

  6. change the source URL with wlst database IOM.

  7 remove the cache, tmp, newspapers of servers.

  8. replace all references to the old hostname with the new host name in the configuration files.

  9 start the administration server. Change in $DOMAIN_HOME/servers/AdminServer/tmp/_WL_user/em/hsz5x1/META-INF/emoms.properties configuration file

  10. restart Admin, start managed servers.

  11 change DirectDB, OimFrontEndURL, BackOfficeURL, Rmiurl SOA Soapurl URL in MS (change management of the cycle of life-11 g Release 2 (11.1.2.1.0) management), urls detail task human workflow.

  12. check the application code for direct reference for host name, change.

• CF2016 - Alias/cf_scripts / scripts on the built-in Web server

  I am following the guide lockdown here:

  http://wwwimages.Adobe.com/content/dam/ACOM/en/products/ColdFusion/PDFs/ColdFusion-2016-Lo ckdown - guide.pdf

  The guide proposes to move/cf_scripts/scripts directory, I did.

  The guide also offers using only the web server integrated access to the ColdFusion administrator, this is how I put it in place.

  The guide also indicates that you need to create an alias for the directory moved to the built-in web server.  See page 58 of the PDF.

  If you plan to use the built-in web server to access the ColdFusion administrator, you may need to create an alias for/cf_scripts/scripts if you have changed the default Script Src in ColdFusion administrator.

  To create a new Alias for/cf_scripts/scripts on the built-in web server

  If you plan to use the web server to access the ColdFusion administrator, then you must also add an alias by adding a tag context inside the tag of the located server.xml file host: /opt/cf11/cfusion/runtime/conf/server.xml

  < context path = ' / '.

  docBase = "/ opt/cf11/cfusion/wwwroot".

  Workie = "/ opt/cf11/fusion/runtime/cone/Catalina/localhost/tamp.

  alias = "/ coscripts = / opt/cf11/fusion/wwwroot/CFIDE/scripts" / >

  Restart ColdFusion, and then test by visiting /cfscripts/cfform.js on your server of builtin.

  There are a ton of typos in the present (Workie vs WorDir, vs conf cone, Pack vs coscripts vs cfscripts, tmp, etc..

  This also seems to be referencing the paths cf11 (CFIDE/scripts vs /cfscripts/cfform.js vs cf_scripts/scripts/cfform.js and cf_scripts/scripts).

  In addition, coldfusion - error.log notes the following:

  WARNING: A context path should be an empty string or start with a ' / ' and do not end with a ' / '. [The path [/] does not satisfy these criteria and has been replaced by]

  WARNING: [SetPropertiesRule] {Server/Service/engine/host/context} setting property 'alias' to ' / cf_scripts/scripts = / cf_scripts/test_scripts "did not find a corresponding property.

  The first line is not a problem, but the second line is.  alias is not a valid property of the context.

  The server.xml file is an example, and it is as follows:

  "< context path =" "docBase =" < cf_home > / wwwroot "WorkDir =" "< cf_home > / runtime/conf/Catalina/localhost/tmp" > "

  < resources >

  < base preResources = "docBase1" className = "org.apache.catalina.webresources.DirResourceSet" webAppMount ="/ aliasPath1" / > "

  < base preResources = "docBase2" className = "org.apache.catalina.webresources.DirResourceSet" webAppMount ="/ aliasPath2" / > "

  < / resource >

  < / context >

  It aligns with the Apache docs.

  I have CF installed on Windows, to F:\CF_2016\.  That's what I did to alias the directory of scripts (renamed to test_scripts for testing) for the built-in web server:

  < context path = "/" docBase = "F:/CF_2016/cfusion/wwwroot" WorkDir = "F:/CF_2016/cfusion/runtime/conf/Catalina/localhost/tmp" >

  < resources >

  < base preResources = className "F:/CF_2016/cfusion/wwwroot/cf_scripts/test_scripts" = "org.apache.catalina.webresources.DirResourceSet" webAppMount = "/ cf_scripts/scripts" / > "

  < / resource >

  < / context >

  It seems to work.  Is this correct? Wouldn't be an alias as \Scripts or /cfscripts instead of/cf_scripts/scripts?

  Why exactly should I alias this to the administrator?

  Thank you

  Hello

  I was in the same boat (we are defining a profile secure for testing) and I see no one answered you so I want to offer what we were doing.

  webAppMount = "/ {NEW_CFSCRIPTS_VIRTUAL_DIRTORYNAME" / >} "

  You see, I believe the problem you had previously was that the base should be the physical directory and the webAppMount should be the virtual directory.

  You were correct about the typos in the "official" document

  I don't know if it's important or not, but we have also created the directory "tmp" (quoted above) within the "{YOUR_DRIVE} :/. "{CFROOT} / cfusion/runtime/conf/Catalina/localhost / ' because it is not there by default.

  Kind regards
  David

• How to know the version of the built-in weblogic Server

  Hi experts,
  
  use jdev11.1.1.5.0
  
  I h had big doubt ;)
  
  How to know the version of the built-in weblogic Server
  
  I think I'm using weblogic10.1.3. but am not sure?
  
  so, how can I found out.
  
  This diary. but I don't see any information on the version.
  

  *** Using port 7101 ***
  "C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\bin\startWebLogic.cmd"
  [waiting for the server to complete its initialization...]
  .
  .
  JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m  -XX:MaxPermSize=512m
  .
  WLS Start Mode=Development
  .
  CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
  .
  PATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\DevSuiteHome_1\jdk\jre\bin\classic;C:\DevSuiteHome_1\jdk\jre\bin;C:\DevSuiteHome_1\jdk\jre\bin\client;C:\DevSuiteHome_1\jlib;C:\DevSuiteHome_1\bin;C:\DevSuiteHome_1\jre\1.4.2\bin\client;C:\DevSuiteHome_1\jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
  .
  ***************************************************
  *  To start WebLogic Server, use a username and   *
  *  password assigned to an admin-level user.  For *
  *  server administration, use the WebLogic Server *
  *  console at http:\\hostname:port\console        *
  ***************************************************
  starting weblogic with Java version:
  java version "1.6.0_24"
  Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
  Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
  Starting WLS with line:
  C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client   -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m  -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Duser.timezone="+05:30" -Dweblogic.nodemanager.ServiceEnabled=true  -Xverify:none  -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server  -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1  -Digf.arisidbeans.carmlloc=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\carml  -Digf.arisidstack.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol  -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\oracle\store\gmds   -Dweblogic.management.discover=true  -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath  weblogic.Server
  <Feb 17, 2012 5:50:39 AM GMT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true> 
  <Feb 17, 2012 5:50:39 AM GMT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true> 
  <Feb 17, 2012 5:50:39 AM GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsystems Inc.> 
  <Feb 17, 2012 5:50:40 AM GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0  Fri Apr 1 20:20:06 PDT 2011 1398638 > 
  <Feb 17, 2012 5:50:42 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING> 
  <Feb 17, 2012 5:50:42 AM GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool> 
  <Feb 17, 2012 5:50:42 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.> 
  <Feb 17, 2012 5:50:42 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00220. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.> 
  <Feb 17, 2012 5:50:42 AM GMT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.> 
  <Feb 17, 2012 5:50:48 AM GMT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.> 
  <Feb 17, 2012 5:50:50 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.> 
  <Feb 17, 2012 5:50:50 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log00102. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log.> 
  <Feb 17, 2012 5:50:56 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY> 
  <Feb 17, 2012 5:50:56 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING> 
  <MessageLocalizationHelper> <getLocalizedMessage> The resource for bundle "oracle.jrf.i18n.MBeanMessageBundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets" cannot be found.
  <Feb 17, 2012 5:51:02 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application GeneralLedger is not versioned.> 
  <Feb 17, 2012 5:51:07 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application Rapppdf is not versioned.> 
  <Feb 17, 2012 5:51:27 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.> 
  <Feb 17, 2012 5:51:27 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00208. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.> 
  <Feb 17, 2012 5:51:27 AM GMT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.> 
  <Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN> 
  <Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING> 
  <Feb 17, 2012 5:51:27 AM GMT> <Warning> <Server> <BEA-002611> <Hostname "rmsys0061", maps to multiple IP addresses: 192.168.0.161, 192.168.2.161> 
  <Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.> 
  <Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.2.161:7101 for protocols iiop, t3, ldap, snmp, http.> 
  <Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.0.161:7101 for protocols iiop, t3, ldap, snmp, http.> 
  <Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode> 
  <Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING> 
  <Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode> 
  IntegratedWebLogicServer startup time: 51640 ms.
  IntegratedWebLogicServer started.
  [Running application frmtesting on Server Instance IntegratedWebLogicServer...] 
  [11:21:30 AM] ----  Deployment started.  ----
  [11:21:30 AM] Target platform is  (Weblogic 10.3).
  [11:21:31 AM] Retrieving existing application information
  [11:21:31 AM] Running dependency analysis...
  [11:21:31 AM] Deploying 2 profiles...
  [11:21:32 AM] Wrote Web Application Module to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\frmtesting\ViewControllerWebApp.war
  [11:21:32 AM] Wrote Enterprise Application Module to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\frmtesting
  [11:21:32 AM] Deploying Application...
  <Feb 17, 2012 5:51:33 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application frmtesting is not versioned.> 
  [11:21:40 AM] Application Deployed Successfully.
  [11:21:40 AM] The following URL context root(s) were defined and can be used as a starting point to test your application:
  [11:21:40 AM] http://192.168.0.161:7101/frmtesting-ViewController-context-root
  [11:21:40 AM] Elapsed time for deployment:  11 seconds
  [11:21:40 AM] ----  Deployment finished.  ----
  Run startup time: 10812 ms.
  [Application frmtesting deployed to Server Instance IntegratedWebLogicServer]
  
  Target URL -- http://127.0.0.1:7101/frmtesting-ViewController-context-root/faces/untitled6.jspx

  http://127.0.0.1:7101/console/login/LoginForm.jsp. He said that the administration weblogicserver 11g console
  
  At the base (copy of right section) 10.3.5.0

  11.1.1.5 JDev will use WLS 10.3.5 as its built-in Server

• How can I change the domain to a server of comment?

  Acrobat 9 on Windows 7

  In addition to editing the registry, how can I change the URL of a comment server which I use for exams?

  Earlier, I initiated a shared review but used only the host name of the server, not the fully qualified name (FQN) which includes the full domain name. Now, when I reuse this server for other comments that I initiate, I'm stuck with the unqualified name. People outside of my subnet cannot post comments on the server because the simple host name is not known on their subnet.

  How can I change the properties of this server so clients use the FQN?

  Jerry

  Yes, you can change the server name in the registry. After change, all the comments that you initiate with this profile will point to the new server location.

• Changing the built in Administrator account?

  In Windows 7, I used the built in Admin account. Now, I've upgraded to Windows 8 my account cannot use Windows 8 Apps. Is there one solution other than to start a new account? I don't want to spend all my photos, videos, etc. and reinstall all my programs under a new account if possible and I don't want that two accounts.

  I just finished by making a new account and move with the resettlement of things. A big problem that I had was that I ended up not having permission to use my own photos! I had to go to the security settings to correct this.

• Finding information on the ink using the built-in Web server in Photosmarts

  SAP (built-in web server) is a useful tool which is used in many respects related to networking, it can provide information on Web Services and can also set Static IP and static DNS on the printer.

  But, if it is connected to the network via Ethernet or via a wireless connection with the Officejet, it is also a great way to check the ink levels and number of pages.

  To access EWS of the printer.  Take the IP address of the printer and type it in a browser on the computer. The IP address can be found under settings wireless to the printer on display or on the Network Configuration report that can be printed.

  Once we've hit this address in the browser, the integrated Web server opens to a screen that will show you some basic information on this page. It will be showing the ink levels estimated for the printer.

  For a more detailed look at the output of consumer and media of ink printers:

  1. once on the homepage of the Photosmart EWS, click the tab above titled "Tools".

  2. from there, looking at the left column on the new page that appears, click reports

  3. from here, click use report
  

   

  • We'll now be able to see how many cartridges have been replaced for each color in the printer.
  • Once can see the total number of pages for pages printed by the printer
  • This report will also give a break down on how many pages when printed on plain paper, photos and media size

  So, for those who are connected by Ethernet or wireless to the printer; Here's another option to find information about the ink levels.  These steps and information listed are general guidelines.

   

  I hope the community finds this is useful and informative.  Good impression!

• In Windows Mail, I need to change the incoming Pop IMAP server info

  In Windows Mail, I need to change the server incoming IMAP POP on my existing account info. Windows Mail is not allowing this change. Is it possible to change or should I create a new account?

  You need get the settings of your mail server that you do not even mention.

• changing the database in weblogic server port

  Hello
  Please help to achieve the following objectives...
  I want to change the database in weblogic port so that weblogic listen port number has changed.
  Please help me to achieve this goal.
  
  Thanks in advance

  Hello

  Go to the WLS console in Data Sources and change the URL of your data source connection pool...

  I hope this helps...

  See you soon,.
  Vlad

• How to change the path when Web server to my system time?

  Hello

  I downloaded a countdown of the Internet SWF file. It works very well with computers that have the Internet connection. But does not work without an Internet connection through the following line of code in an XML file:

  < PHPurl > http://www.flepstudio.org/utilita/countdown/GetTime.php < / PHPurl >

  When I opened the Web page by using the code above, it shows the time in a typical numbers:

  Monday, October 18, 2010 21:12:52 in my system-watch in the Web browser like: time = 1287425579

  How to change the code so that I can use my time system to work with countdown without an Internet connection.

  Here is the path from where I downloaded the file count:

  http://www.flepstudio.org/Forum/flepstudio-utilities/2960-Flash-CS3-countdown.html

  Please, help me run this countdown without internet access.

  Thank you.

  It seems that all this php file does is return a variable of time value =.  If you need to see where this time variable is implemented in the Flash file and assign it a value using the date.getTime method instead of having the PHP file called into play.  Look in the help documents or Google if you don't know how to use the class Date.

• Y at - it no problem when changing the OC4J to WEBLOGIC Server

  Hello
  
  We need to develop a product in Jedeveloper 11 g. In development mode, used as application WEBLOGIC 10.3 Server. But during the mode of production, we must apply the EAR oc4J APPLICATION Server files.
  
  While changing this, I know my system work as such in the WEBLOGIC Server?
  
  If I have loss any specific fuctionalities Rich Ajax? Is everything working in development is necessary?
  
  Everything in Google search, I found, in JDeveloper 11 g oracle prefer WEBLOGIC instead of OC4j. Can someone tell the reason for it.
  
  Thank you
  Thierry.

  Thierry,

  OC4J is a java container in the OAS.

  The link you provided States exactly the same thing as I have indicated above, namely that the ADF applications would not be supported on OAS/OC4J.

  John

• Performing a Firmware Upgrade using the built-in Web server

  This video provides step by step instructions to perform a firmware update using the integrated Web (EWS) server for single function of HP LaserJet and multifunction printers.

  For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support.

  This video was produced by HP.

  I hope you find this information useful.

• Satellite A100-294: cannot change the built-in RAM module?

  The integrated RAM (512 MB) of my Satellite module problems (based on memtest86) and the machine was freezing all the time. It is under warranty, so I got to the store I bought.

  They told me that they send the machine to Toshiba AC because it will probably be a new mainboard to correct the problem, since the DIMM is permanently attached to the Board and cannot be changed as all the regular module DIMM.

  Is this true? Is the 512 MB of RAM the machine is supplied with, physically inseparable from the motherboard?

  Hello

  As much as I know doses Satellite A100-294 does not in charge of the internal memory!
  The unit simply uses the memory DDR2-533 modules that are removable.
  The memory location is placed at the bottom of the unit and it s easy to reach.

  But maybe the head technicians would like to take a look at this motherboard and therefore the ASP had to send this book to the Toshiba headquarters