Performing a Firmware Upgrade using the built-in Web server
This video provides step by step instructions to perform a firmware update using the integrated Web (EWS) server for single function of HP LaserJet and multifunction printers.
For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support.
This video was produced by HP.
I hope you find this information useful.
Tags: HP Printers
Similar Questions
-
How to: Perform a Firmware Upgrade using the integrated Web server for HP printers
Watch this video that shows how to perform an update of the firmware, using the built-in Web server for HP printers.
Hope this video is useful if you find that it had to update the firmware on your HP printer.
-
Performing a Firmware Upgrade using the integrated HP printers Web server
Hi all
This video provides step by step instructions to perform a firmware update using the integrated Web (EWS) server for single function of HP LaserJet and multifunction printers.
Hope that the information contained in my previous post are useful if you are in the need to update the firmware on your Laserjet.
-
Finding information on the ink using the built-in Web server in Photosmarts
SAP (built-in web server) is a useful tool which is used in many respects related to networking, it can provide information on Web Services and can also set Static IP and static DNS on the printer.
But, if it is connected to the network via Ethernet or via a wireless connection with the Officejet, it is also a great way to check the ink levels and number of pages.
To access EWS of the printer. Take the IP address of the printer and type it in a browser on the computer. The IP address can be found under settings wireless to the printer on display or on the Network Configuration report that can be printed.
Once we've hit this address in the browser, the integrated Web server opens to a screen that will show you some basic information on this page. It will be showing the ink levels estimated for the printer.
For a more detailed look at the output of consumer and media of ink printers:
1. once on the homepage of the Photosmart EWS, click the tab above titled "Tools".
2. from there, looking at the left column on the new page that appears, click reports
3. from here, click use report
- We'll now be able to see how many cartridges have been replaced for each color in the printer.
- Once can see the total number of pages for pages printed by the printer
- This report will also give a break down on how many pages when printed on plain paper, photos and media size
So, for those who are connected by Ethernet or wireless to the printer; Here's another option to find information about the ink levels. These steps and information listed are general guidelines.
I hope the community finds this is useful and informative. Good impression!
-
CF2016 - Alias/cf_scripts / scripts on the built-in Web server
I am following the guide lockdown here:
The guide proposes to move/cf_scripts/scripts directory, I did.
The guide also offers using only the web server integrated access to the ColdFusion administrator, this is how I put it in place.
The guide also indicates that you need to create an alias for the directory moved to the built-in web server. See page 58 of the PDF.
If you plan to use the built-in web server to access the ColdFusion administrator, you may need to create an alias for/cf_scripts/scripts if you have changed the default Script Src in ColdFusion administrator.
To create a new Alias for/cf_scripts/scripts on the built-in web server
If you plan to use the web server to access the ColdFusion administrator, then you must also add an alias by adding a tag context inside the tag of the located server.xml file host: /opt/cf11/cfusion/runtime/conf/server.xml
< context path = ' / '.
docBase = "/ opt/cf11/cfusion/wwwroot".
Workie = "/ opt/cf11/fusion/runtime/cone/Catalina/localhost/tamp.
alias = "/ coscripts = / opt/cf11/fusion/wwwroot/CFIDE/scripts" / >
Restart ColdFusion, and then test by visiting /cfscripts/cfform.js on your server of builtin.
There are a ton of typos in the present (Workie vs WorDir, vs conf cone, Pack vs coscripts vs cfscripts, tmp, etc..
This also seems to be referencing the paths cf11 (CFIDE/scripts vs /cfscripts/cfform.js vs cf_scripts/scripts/cfform.js and cf_scripts/scripts).
In addition, coldfusion - error.log notes the following:
WARNING: A context path should be an empty string or start with a ' / ' and do not end with a ' / '. [The path [/] does not satisfy these criteria and has been replaced by]
WARNING: [SetPropertiesRule] {Server/Service/engine/host/context} setting property 'alias' to ' / cf_scripts/scripts = / cf_scripts/test_scripts "did not find a corresponding property.
The first line is not a problem, but the second line is. alias is not a valid property of the context.
The server.xml file is an example, and it is as follows:
"< context path =" "docBase =" < cf_home > / wwwroot "WorkDir =" "< cf_home > / runtime/conf/Catalina/localhost/tmp" > "
< resources >
< base preResources = "docBase1" className = "org.apache.catalina.webresources.DirResourceSet" webAppMount ="/ aliasPath1" / > "
< base preResources = "docBase2" className = "org.apache.catalina.webresources.DirResourceSet" webAppMount ="/ aliasPath2" / > "
< / resource >
< / context >
It aligns with the Apache docs.
I have CF installed on Windows, to F:\CF_2016\. That's what I did to alias the directory of scripts (renamed to test_scripts for testing) for the built-in web server:
< context path = "/" docBase = "F:/CF_2016/cfusion/wwwroot" WorkDir = "F:/CF_2016/cfusion/runtime/conf/Catalina/localhost/tmp" >
< resources >
< base preResources = className "F:/CF_2016/cfusion/wwwroot/cf_scripts/test_scripts" = "org.apache.catalina.webresources.DirResourceSet" webAppMount = "/ cf_scripts/scripts" / > "
< / resource >
< / context >
It seems to work. Is this correct? Wouldn't be an alias as \Scripts or /cfscripts instead of/cf_scripts/scripts?
Why exactly should I alias this to the administrator?
Thank you
Hello
I was in the same boat (we are defining a profile secure for testing) and I see no one answered you so I want to offer what we were doing.
webAppMount = "/ {NEW_CFSCRIPTS_VIRTUAL_DIRTORYNAME" / >} "
You see, I believe the problem you had previously was that the base should be the physical directory and the webAppMount should be the virtual directory.
You were correct about the typos in the "official" document
I don't know if it's important or not, but we have also created the directory "tmp" (quoted above) within the "{YOUR_DRIVE} :/. "{CFROOT} / cfusion/runtime/conf/Catalina/localhost / ' because it is not there by default.
Kind regards
David -
HP Laserjet M606x: Disable the option 'Print' in the built-in Web server
I am testing a new HP Laserjet M606 device and to disable the option 'Print' which is displayed in the 'Information' tab in the built-in webserver (EWS). I have a firewall turned on, turned off wireless printing, FTP, AirPrint, Web Services, PPI and independent producers is also disabled. HP Jetdirect XML service is also disabled. I have crossed most of the EWS settings and configuration options in JetAdmin and did not find an option to turn this feature off.
The device will be located in a public place and will have a reserved/static IP address (DHCP reserved). We charge for services to the end-users of printing - having this option turned on means that users can print for free if they find the IP address of the printer - not an ideal situation.
Is it possible to disable this option permanently? The only other solution is to disable EWS entirely, if possible.
To be a little more specific in the built-in web server click the Security tab. Now scroll down until you find the section for embedded web server settings. I was watching who had enough current firmware in the machine there is a checkbox to enable or disable the option for printing on the information page.
-
How not one disables the built-in web server?
In my case Adobe technology enabled web server integrated for some sort of test and left, that it has. I would like once more to turn it off to limit the attack surface that I see it's getting some visits by an internal network vulnerability scanner.
Where is the configuration file and setting specific to only disable the built-in web server?
Unwanted changes to the built-in web server is referenced in this article in the forum: http://forums.Adobe.com/message/4388179
Add Miguel-F information, in case you use ColdFusion 9 then, adding only the code below, in the section above will be used.
true -
Photosmart 2575 AIO - need to reset the password for the built-in web server
People,
I lost the password to the web server integrated on my HP Photosmart 2575 all-in-one.
Can you please help me reset it?
Thanks in advance and Bravo!
Cristian.
csantiago78 wrote:
I lost the password to the web server integrated on my HP Photosmart 2575 all-in-one.
Can you please help me reset it?
This thread gives to think that a full reset can be done by disconnecting the power to the Photosmart 2575, then plug the power while pressing the keys 'Cancel' and 'OK '.
-
The password has been reset, but we cannot go beyond the server request the user name and password to change the other settings. We have not had any problems to set up the printer to the computer and we are able to print and use the printer. We just need to find EWS to change other settings. We use Windows 7.
Hi there @Mariko23
Welcome to the forums,
I understand the SAP you request a user name and password and you're looking to reset the built-in Web server to access accordingly.
I suggest try to restore default network settings on the device, which should help you.
On the printer, select Setup, network configuration, network by default, Yes, restart the printer.
Good luck, I hope this helps
-
We try to remotely administer printers HP OfficeJet Pro 8500 A909g Wireless
M/N: CB023A
They print and scan very well, and we can access the home page of each printer EWS.
We have been asked to make a few changes and cannot go beyond the EWS username and password authentication request.
In my view, it has been defined by a previous administrator, but him documented names of user and password we have on file do not work.
How do reset us the EWS password?
I havethe default value is EMPTY, but if not, that would be the default password after reset? SOLVED!
Then I got a job to another printer HP OfficeJet 8 X 00-
All you have to do is RESTORE network defaults on the front control panel - this will reset the default value:(1) requirement for access password turned OFF
(2) default user name is ADMIN
(3) password is EMPTY
then, on command before Panel set your IP network information, and you will then be able to access the built-in Web server and see all / manage all settings, including resetting the password to the web server integrated EWS.
WITH THE SUPPORT OF HP NO.
-
I'm running Win 7 and I was trying to set up two accounts different wireless setting - home and hotspot, one for each type of internet connection used. Somehow, I screwed up the initial settings in the 'built-in Web server' and don't know how to access again to make the changes. My printer just keeps giving me 0.0.0.0. I'm unable to access the last URL I had for the Assembly of the House.
If more information is needed, please let me know as I am new to this forum. Thanks for any help you provide.
Live, love, laugh and calculateHello
Please see the document below to install the printer wireless.
-
I currently have an iMac 27 ", end of 2012 running OSX 10.8.5 Mountain Lion. Can I upgrade directly to El Captain OSX 10.11.2 without going through any other upgrade using the free update available on my update page? Thank you
Yes.
(137273)
-
How to activate and use the built-in webcam
built in webcam
How to activate and use the built in webcam on my desktop Dell Inspiron 1?
MikeViklund,
Try to read...
Use and troubleshooting of the Webcam Dell and Dell Webcam Central Software
Rick
-
For 2 years, I used the built in camera 1.3, somehow suddenly dissappeared and when I click on says it is not installed, I don't want to go into a repair shop because they charge you too much money. Please help, thanks. my pc is windows 7.
Original title: built in webcam 1.3
Hi, Nancy,.
Control Panel > add a device
Windows will search for devices connected to your system, but not installed. Click on the name of the webcam which shows in the search box and then click "next".
Choose whether you want Windows to search for the device driver webcam using Windows Update on the Internet, or if you prefer research of Device Manager to the driver using a disc provided by the manufacturer of your laptop. Most of the drivers are on the system recovery disk included with your laptop, if you choose to add the driver from the disk. Check the box of your choice, then click on "next >" to continue.
Wait while Windows searches from the driver using Windows Update, if that is your choice. There's an active Internet connection for Windows to do successfully. Allow the computer to install the driver and then restart the system for the webcam to be recognized by the system.
Otherwise, you can use the system recovery disk or a driver downloaded directly from the manufacturer of your laptop to install the driver without using search Windows Update.
Open the CD/DVD-ROM drive and insert the disc of recovery system or place the driver downloaded from the manufacturer in a directory of files easily accessible on your PC, or on the desktop, or in your 'My Documents' folder.
Choose the option 'install the software automatically (recommended)' into the application 'Add a device', then press on "Next >" to start looking for your webcam driver. The Hardware Wizard will search the system recovery disk and automatically installs the driver. Press 'Finish' to close the wizard, and then restart the computer to allow the recognition of the webcam. Choose the option "Install the software manually" in order to access the location of the driver where you saved the driver and install it from there. Use the open file manager and search for the driver. Click on the ' next > ' button to install the driver, and then restart the computer to add webcam functionality. -ehow.com
-
Upgrade in Windows 7 Home Premium to professional
I have Windows 7 Home Premium (OEM Version) installed in Australia and bought a Windows 7 Professional upgrade key in the United States. When you try to upgrade using the Windows Anytime Upgrade feature, it tells me to use a different key, yet my upgrade pack tells me to use the Windows Anytime Upgrade feature! I bought the upgrade from a reputable store in San Francisco. Any ideas why it does not work?What is a retail upgrade or full version or an Express upgrade?
If its OEM license, it will not work.
If at any time the upgrade fails, Windows Anytime Upgrade Fail:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade
Maybe you are looking for
-
Satellite A100 PSAA8U: How can I unlock the system - remove BIOS password?
I recently bought a model of Satellite A100 PSAA8U - 0S 3033 at a yard sale. After changing the memory and the HARD drive (which was supposed to be the problem with the system), I came to understand, there was a password required before I can use the
-
Why is my Service Provider Null?
I had a problem with my profile setting, where it has a field for service provider, it says nothing even after several times to enter my info. I have Verizon, but even after the update, it always says null. Will this affect my participation to MFN? A
-
Can I assign special keys to move the mouse?
Original title: is there a way I can control (similar to the mouse keys) mouse with key other than the numeric keypad? I would move the mouse and then click on some of the keys of the alphabet. I want to do the following: Move down with the Q Click o
-
original title: user profile issues I get a message when I connect my user profile is not long and established a temporary user profile. How can I fix this problem.
-
I have a HP slate7 more and can't use the audio jack with any type of helmet. It is on an angle and the headset going, I heard an explosion of music and then nothing. Play with it only give me the same hot flashes to music. Is it because it is on a